REPAIR TO BATHROOM TOILET SUNKEN FLOOR SANITARY FITTING ROOF LEAKAGE REPAIR TO PATH SECURITY WALL FENCING AT DHANGU MIL COMPLEX AND REPAIR TO DRAIN SEWAGE MISC WORK AT BHADORIYA COMPLEX AND OTG UNDER GE S PATHANKOT

Amount

Demolition of brick work stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work in cement mortar 1:4 of old size sub class ‘B' bricks straight or curved on plan exceeding 6mtr mean radius complete all as specified and directed.

All as per description of item 02 above but except bricks complete all as specified and directed

M&L for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

M&L for 15mm thick plaster in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement including two coats of cement base paint over a coat of primer on newly plastered surfaces of wall including preparation of surfaces and curing after applying each coat complete all as specified and directed.complete all as specified and directed

M&L for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement including preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. all as specified.

Taking down chowkat or frame with shutter (without taking off shutter from the frame) not exceeding 1.50 Sqm each including taking out hold fast embedded in PCC complete all as specified and directed.

Complete all as per Ser item 7 above but area exceeding 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1.00 sqm and not exc 2.00 Sqm each complete all as specified and directed.

S&F pressed steel frame for door made out of MS sheet 1.25mm thick of size 105mmx60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.

S&F pressed steel frame for doors made out of MS sheet 1.25mm thick of size 125mmx60mm for with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.

Cement concrete type C1 1:3:6 (using 20mm graded crushed stone agg) backfilling of chowkats lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

S&F steel window/ventilator with tubular frame factory made double shutters of size 79mm x 39mm, 16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl projecting type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 10mm square bar grills complete, including two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed & as shown on drg No CEPZ/ID-245/01 and 246/02 sheet ½ & 2/2.

S&F 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified and directed.

S&F 35mm thick 2nd class hard wood in glazed and Skelton factory made shutters open rebated and prepared to receive glass/wire gauge etc with sash bars edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass/wire mesh etc sizes of members as per clause 8.20(a) of SSR Part-I complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.Note :- Door frame shall be water proof, terite proof, elegant and should have excellent screw holdig strength to fix hinges abnd hold doors properly fora long life)

S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 5 mm thick Moulded Prelam PVC Sheet on the front face & 5 mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engr-in-Charge.

S&F Anodised aluminium powder coated frame of any colour (Thickness or powder coating not less than 50 micron for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Anodised aluminium powder coated door shutters of any colour (Thickness or powder coating not less than 50 micronaluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified complete all as specified and directed.

S&F for Anodised aluminium powder coated windowof any colour (Thickness or powder coating not less than 50 micron and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.complete all as specified and directed.

S&F in repair 5mm thick tinted glass in door shuters with aluminium beading/glazing clip of both side complete all as specified and directed.

S&F in repair Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as specified and directed.

S&F in repair including necessary cutting & finshing Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy dutyi ncluding necessary cutting & finshing work all as specified and directed.

Refixing Aluminum frame with suitable rawl plugs with brick/concrete wall all as per direction of Engineer-in -charge including finishing Jams surface with existing wall surface all as specifed.

Refixing Aluminum shutter of any dscription exc 1.00 Sqm n exc 2.50 sqm each after Easing and adjusting by opening all side members and refix with cleats and screw in true alignment including existing fitting/fixtures as in the same opening complete with Aluminum frame all as specifed & directed

S&F for aluminium mortice lock, vertical type 75mm size of 4 lever all as specified and as directed by Engineer-in-charge.

S&F floor door stopper of overall length of cover plate 140mm alluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and directed.

S&F in repair 300mm ordinary rat rail, rod pattern mild steel springs ISI marked including roller and roller plate complete including all necessary welding if required complete all as specified and directed.

S&F 300mm ordinary rat rail, rod pattern mild steel springs ISI marked including roller and roller plate complete including all necessary welding if required complete all as specified and directed.

S&F 150mm long aluminium, anodized barrel tower bolts of extruded section ISI marked complete all as specified and directed.

S&F 150mm extruded aluminium alloy handle fabricated anodized ISI marked complete all as specified and directed.

S&F 100mm long butt hinges medium weight cold rolled ISI marked mild steel complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F floor door stopper of overall length of cover plate 140mm alluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and directed.

S&F glavinized mild steel wire cloths 0.56mm nominal dia and average width of aperture 1.18mm & fixed with tint tacks or glavinized wire staples complete all as specified and directed.

S&F in repair glavinized mild steel wire cloths 0.56mm nominal dia and average width of aperture 1.18mm & fixed with tint tacks or glavinized wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness,size,quality or description) from wooden frames,glazed with putty or fixed with beads complete all as specified and directed.

S&F sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square n.exc 0.50Sqm in each panes complete all as specified and directed.

S&F 160mm bore, PVC rainwater (SWR) drainage pipes 4kg single socketed, in any length with rubber ring joints as in repair, fixed to walls/floor complete all as specified and directed.

S&F 160 mm bore pipes,PVC (SWR) bends any radius fitting for PVC (SWR) pipes as in repair, complete all as specified and directed.

Taking down old broken cast iron pipes from existing sewage line or along plumbing stack along the walls including necessary excavation in trenches where required, removal of surplus soil and returning filling in complete, supplying, laying in trenches or along the walls with MS clamps of standard specifications and jointing 75mm bore PVC 4Kg waste and vent pipe ISI marked in any length with or without ears with cement joints laid in floor/walls as in repair, complete all as specified and directed.

Dismantling of floor tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off permises ,M&L Ceramic colouerd tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm,in floors etc.set and jointed in neat cement slurry with and pointed in coloured cement match the colour of tiles over 15mm thick screed bed in cement mortar 1:4 all as spd.

Dismantling of floor tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off permises, M&L vitrified ceramic tiles light shde 10 mm thick ( sq/ rect) polished, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Dismantling of floor tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off permises,M&L vitrified ceramic tiles 10 mm thick ( sq/ rect) polished, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in verticle surfaces like skirting/dado, steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Dismantling of wall tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off permises,M&L for providing glazed ceramic coloured wall tiles of exterior quality of size 450mmx 350mmx 7mm thick, set, jointed in colour cement to match laid over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Dismantling of floor tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off permises,M&L Non skid ceramic colour tiles 7 to 8 mm thick ( sq/ rect) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc set in any type of mortar complete all as specified and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillers, window-cills, cooking platforms and like fixed in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S&F in repairs 25mm dia stainless steel curtain rod fixed with stainless steel brackets & ornaments fixed with screws,gutties etc design/shape approved by Engr-in-charge complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition,M&L for RCC type B-1, using 20mm graded crushed aggreage as in slab supported on walls, beams and columns in floors, roofs, landing, ballonies and in shelves and the like complete all as specified and directed.

M&L for form work to sides and soffits of shelves for rough finished surfaces of concrete complete all as specified and directed.

Preparing wood or wood based new or untreated surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

Dismentling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, Providing and fixing tiled flase ceiling of size 595x595 mm incl of ceiling tiles in true horizontal level suspended on inter locking matrix 32 mm matel grid of hot dipped galvanised steel sections (galvanised @120gms per sqm both side incl) consisting of 3600mm long main "T" of size 24x25mm and 0.30mm thick and PPGI sheet wall angle of size 24x24mm and 0.40mm thick. Bottom exposed capping of width 24mm of all T sections shell be 0.25mm thick. PPGI wall angle is fixed aling the perimeter of ceilings to walls, partition or columns etc with rawl plug and wooden secrews at 300mm denters. Main T runners are than suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12mm dia and 38mm long dash fatners, 2 mm thick wire spaced at max 1200 mm center to center along main T and not more than 150mm with slipped joints, the last hanger at the end of each main runner should not be greater than 600mm from adjecent wall. than 1200mm long cross T is interlocked between the main T at 600 mm center to center to form at grid 1200x600mm and than secondary cross of length 600mm is interlocked at middle of 1200x600mm grid to form grids of 600mmx600mm . cross T at the ends having length more than 600mm are to be supported independently. Finally PVC laminated with aluminium foil back board tiles of size 600x600x9mm thick tiles having light refectors of >=75% are placed in the grid incl dismentling of wall and ceiling board (fiber, pulp, insulation, etc) or insulation boards/ slabs/ blanket, any thickness complete all as specified and directed.

Dismantling water tanks (capacity of tank exc. 250 ltr but n. exc. 500 ltr) and removing from site ,S&F Rotational moulded polyethelyne water storage tank three layered (cylindrical vertical with closed top hoisted fixed in position all as specified in SSR part-I, capacity of tank 500 ltr incl inlet and outlet connection , over flow pipe complete all as specified and directed.

Dismantling water tanks (capacity of tank exc. 500 ltr but n. exc. 1000 ltr) and removing from site,S&F Rotational moulded polyethelyne water storage tank three layered (cylindrical vertical with closed top hoisted fixed in position all as specified in SSR part-I, capacity of tank 1000 ltr incl inlet and outlet connection , over flow pipe complete all as specified and directed.

S&F in repair 20mm ball valvs high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified

S&F in repair plastic water closet seat cover, back closed pattern with flat bottom, and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair vitreous china wash hand basin (flate back or angle back type) coloured of bowl size 550mmx400mm including waste and waste pipe PVC 32mm dia to be fixed over marble slabs or iron bracket including 15mm bore pillar tap chromium plated complete all as specified and directed.

S&Fix in repair Vitreous china urinal half stall complete incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and incl 60mm long brass secrews, pointing around urinal in back in cement; fixing automatic cistern with brackts, flush pipe, grating and union for discharge pipe.

S&F in rpairs 10 litres PVC low level flushing cistern( white colour) syphonic action type with inlet ball valve float and push type handle including bracket, PVC 32mm dia flush pipe with coupling and fixed complete all as specified and directed.

Supply & fixing waste pipe for wash basin/urinal/sink of required sizepproved by Engr-in-charge complete all as spcified and directed.

S&Fin repair PVC connection 15mm bore size with two nuts and washers of length 450mm complete all as specified and directed.

S&F grating round 140mm size of PTMT (minium weight 50gms) as in repair, complete all as specified and directed.

S&F in repair 15 bib taps, fancy type, chromium plated, cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down screwed for iron pipe complete all as specified & directed.

S&F in repairs 15mm bore Angle valve fancy type brass chromium plated ISI marked with crutch or butter fly handle high pressure screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S&F in repairs 15mm bore brass stop valve chromiun plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for 15mm bore of pipe complete all as specified and directed.

S&F in repair pillar tap brass chromium plated fancy type with capstan heads screwed down high pressure with or without lettered hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia complete all as specified and directed.

S&F in repairs brass chromium plated shower rose 75mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair brass Chromium plated Soap Dish fixed with and incl CP screws all as specified and directed.

S&F in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed and incl CP screws all as specified and directed.

S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed.

S &F in repair Brass CP central hole wash basin mixer w/o pop up waste system for hot & cold water for 15mm bore complete fixed to connections, complete all as specified and directed.

S &F in repair Brass CP wall mixer w/o pop up waste system for hot & cold water for 15mm bore complete fixed to connections, complete all as specified and directed.

S&F in repair flushing cistern long bend pipe complete all as specified and directed.

S&F in repair flushing cistern short bend pipe complete all as specified and directed.

Dismantling brick tiles or terracing tiles, single layer on roofs all as specified and directed.

M & L 40mm thick brick tiles laid on 15mm thick cement mortar 1:6 and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement.

Roughening the surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc with and including taking out existing roof treatments, brushing neat cement slurry with 3.0 Kg of cement per sqm and providing 10mm thick rendering in Cement mortar 1:4 on fair faces of concrete, finished even and fair mixed with and including water proofing compound to receive treatment on roof Providing and laying of water proofing treatment of roof APP (Atactic Polyproplyllen) modified prefabricated five layer 3mm thick water proofing membrane, with non woven polyester mat reinforcement of 160 gsm, weight of membrane @ 3.6 Kg/Sqm over a solvent based bitumen primer, @ 0.3 Ltr Sqm by the same manufacturer conforming to IS:3384-1986 , The membrane shall be laid using bitmun torch.The end lap should be 100 mm and the side lap must be minimum 75 mm the membrane shall be first laid up to the parapet wall junction and then shallbe overlapped with another membrane (flashing) with an overlap covering up to a distance of 300mm. In case parapet height is less than/ up to 500 mm, membrane shall be terminated at the top of parapet.All rain water pipe opening shall be suitably sealed with the APP membrane including two coat of silver paint all as specified and directed by Engr-in-Charge. (The rate includes for filling cracks in existing roof with cement putty using suitable bonding agent (shalcrate 42) before laying cement plaster)

Taking down old damaged SGSW pipes from existing lines including necessary excavation of old fitted in trenches & S&F UPVC underground drawongs pipe (UDS) type 'B' 200mm dia with wall thickness 4mm (min) and pressured 4 KN /Mtr Sq jointed in cement solvent complete including providing cement concrete (1:4:8) type D-2 using 40mm grade stone agg as in bed for 200mm bore pipes incl packing under and huaunching against the sides of pipes after they are laid tested complete all as specified and directed.

All as per item srl No 80 above but 160 mm dia complete all as specified and directed .

Cutting into existing manholes for connecting new drains, making good to pipe and making good of broken manhole.

M&L Cleaning of existing septic tank/soakage well/ manholes/ lines and de-sluding /de-watering of septic tank and soakage well of any size and depth by removing the manhole covers of any type / size and cleaning by means of hydraulic jet pressure/pumping machine as requierd making it fully functional to the entire satisfaction of Engr -In- Charge at site, from manholes and well flushing with water after cleaning including getting out sludge if any and liquid materals from connecting manholes deposited in sewar line removing the solids and sludge to any distance and reinstating the manhole cover to its oiginal postion (cost of removal of sludge/liquid material from sewage lines and manholes in same line is incl. in rate of this item and rate quoted also includes for keeping particular sewage line septic tank and soakage well which is undertaken once for cleaning, functional for full contract period) complete all as specified and directed. Note:- (a) The contractor shall bailout entire blocked sewage in septic tank,soakage well,line etc and all as directed by Engr-in-Charge. (b) Contractor shall make himself aquainted with the area & the complain received daily in general.No claim however shall be entertained in regard to any incorrect assesment or increase in complains due to unforescen reason. (c) Contractor will deploy sufficent mazdoor(skilled or unskilled) to attend complaint as mentioned above. Incase of non attending complaints sufficent time as decided by Engr-in-Charge but not more than 3 day ,recovery @ 1000 per day will be recovered from contractor. (d) The contractor shall provide adequate tools,pressure pump for cleaning blocked lines and pumping bailing out machine & storage tank for sludge. (e) The sludge obtained during rectifying the complaints shall be deposited & dispose suitably all as specified and directed .

Disconnecting existing tanks, setting side for repairing cleaning and removing all scale and dirt etc. from tanks and from mouths circulating pipes and hoisting in same position of capacity upto and including 500 ltr and endorsed the word "CLEANED ON WITH DATE with white paint including replacement of broken/unserviceable fitting such as Elbow Tee, socket, nipple of any size complete all as specified & directed

Disconnecting existing tanks, setting side for repairing cleaning and removing all scale and dirt etc. from tanks and from mouths circulating pipes and hoisting in same position of capacity exc 500 ltr but not exc 1000 ltr and endorsed the word "CLEANED ON WITH DATE with white paint including replacement of broken/unserviceable fitting such as Elbow Tee, socket, nipple of any size complete all as specified & directed

S&F in repair 15mm ball valve high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified

Taking down cement plaster on brick/stone wall etc including raking out joints hacking for key scrubbing down with water etc .

M&L for 15mm thick plaster in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement complete all as specified and directed.complete all as specified and directed.

M&L for two coats of cement base paint to newly plastered surfaces including preparation of surfaces over a coat of primer all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggt as in coping all as spd and directed.

Demolition of cement concrete unreinforced of any description in any position not otherwise specifically provided for complete all as specified and directed

M&L 50mm thick PCC, type B-1, 1:2:4, ( using 20mm graded crushed stone aggregate) as in plinth protection finishing the surface even and smooth without nusing extra cement complete all as specified and directed.

M&L for PCC 1:3:6, type C-1 using 20mm graded crushed stone aggregates aggregate, as in surface channel and drains etc.all as specified & directed.

M&L for PCC 1:4:8, type D-2 using 40mm graded crushed stone aggregates aggregate, as in foundation filling and mass concrete all as specified & directed.

Preparation of new steel surfaces of any description not otherwise described, over 10 cm width or girth and providing two coats of synthetic enamel paint over a coat of red oxide primer all as specified & directed.

Demolition of cement Concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level ) complete all as specified and directed

M&L for 100mm thick plain cement concrete 1:2:4 type B-1 ( using 20mm crushed stone agg ) as in floors ,ramps,hard standing or as in similar work finished even and smooth without using extra cement including form work where required all as specifed and directed .

M&L for Cement concrete type B1 1:4:8 (using 20mm graded crushed stone agg) 75 mm thick as in sub base etc finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for Screed bed or bedding layer of 20 mm thick CM (1:6) as in floor, complete all as specified and directed.

M&L for Chequered cement concrete coloured, table vibrated chemical coated, tiles 300mm x 300 mm x 25 mm thick table set and jointed, pointed in neat cement slurry with grey cement and no pigment as in floor, complete all as specified and directed.

Demolition of stone slabs, paver blocks and tiles of any description or thickness in floors/apron laid dry.

S&F machine pressed precast concrete interlocking paver blocks with grey cement and no pigment, any shape and size conforming to IS 15658:2006 of 60 mm thickness M35 grade complete all as specified and directed.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description.

M&L for mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings

M&L Prepainted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength 550 Mpa as in roof covering/cladding to walls, fixed with selg taping screws as specified.

M&L pre painted galvalume aluminum zinc coated GI based plain steel sheeting 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self taping screws as specified.

Providing precast cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in cover slabs and similar articles including necessary moulds/formwork set in cement mortar (1:6) complete all as specifed and directed.

M&L mild steel TMT bars 10mm dia and over cut to length, bent to shape, required including cranking, bending, spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified .

M&L for Mild steel TMT bars 6mm to 8mm dia cut to length bent to shape required including cranking, bending, binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Taking up or down GI pipes 20mm bore and connection including cleaning for refixing or removal un-serviceable pipe,S&F GI tube 20mm bore medium grade galvanized with all fitting and fixed to short length complete all as specified and directed.

Taking up or down GI pipe 15mm bore and connections, including cleaning for refixing or removal unserviceable pipe,S&F 15mm bore GI tubing medium grade galvanized ISI marked with all fittings complete on walls complete all as specified and directed.

S&F Doctor fixit Pidifin 2k high performance 2 component flexible Acrylic polymer modify cement base water proofing coating in two coat 1mm thick dry film mixed in ratio 2:1 by weight or 1.5:1 by volume product of M/S Pidilite Industry Limited Makers of Fevicol adhesive brand over 10mm thick rendering in cement mortar 1:4 mixed with liquid water proofing admixture of approved brand complete all as specifed & directed.

M&L for 1:5:10 type E2 cement concrete in foundation, filling and mass concrete complete all as spd and directed.

S&F in repairs vitreous china wash down water closet (pedestal pattern) white including fixing bolts and connecting to drain pipe, including seat cover plastic flat bottom and MS Chromium plated hinging device and connection to flush pipe, anti syphonic pipe etc complete all as specified and directed.

S&F in repair vetreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest ( excluding flushing cistern and flush pipe), including connection to trap, and to flushing pipe, anty syphonage pipe etc. and including 'P' or 'S' trap complete incl making good to floor complete all as specifed and directed.

Dismantling/taking down of cast iron or unreinforced concrete or PVC soil waste and drain pipe 75mm or 100mm dia with all fittings complete all as specified and directed.

S&F in replacement 75mm bore PVC floor trap with grating including jointing to waste pipe in cement concrete type B-1, 1:2:4, complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or labortory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified & directed.

S&F for 110mm bore pipes,PVC (SWR) bends any radius fitting fo PVC (SWR) pipes as in repair complete all as specified and directed.

M&L for hard core of gauge n.exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surfaces complete.

M&L Providing precast cement concrete 1:2:4 type B-0 using 12.5mm graded aggregates louvres and jallies, 40mm thick (measured solid), including all mouldings but excluding frame, set in CM 1:4.complete all as specifed and directed.

Roughening the surfaces of old concrete by sweeping, clean & washing down with water to remove dust & applying two coats of silver paint over a coat of primer.

M&L for preparation of old surfaces of wall, roof projection /window chajjas & similar surface and applying one coat of plastic emulsion paint complete all as specified & directed.

M & L Providing precast cement concrete Type B-1 1:2:4 in window or door ,cills,lintels,bressumers ,steps,quoin block(for use with masonry) string courses, copings, kneelers,apex stones,pier caps, columns, posts,boundry pillars,bed plates,pikntle block, anchorage blocks, bonders(for stone walling),corbels,brackets etc (of any section indicated) with plain fair faces,including chamfers weathering throating etc and setting in mortar complete with joints to match complete all as specified and directed.

Note: In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account.

Ashoka Engineers

M/S Ajay Kumar Mahajan

M/s gurdial singh and co

M/S BISHAN DASS AND SONS

VIKRAM SINGH MANHAS

jagdambe traders

Abrol construction co