Construction of office complex above the sports complex (Gymnasium) at IIM Indore.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead etc. complete as per the requirement of site & as per directions of Engineer-in-Charge.

Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) etc. complete as per the requirement of site & as per directions of Engineer-in-Charge.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below etc. complete as per the requirement of site & as per directions of Engineer-in-Charge.

Demolishing dry brick pitching/ brick bat coba in floors, drains etc. including stacking of serviceable material and disposal of unserviceable material within 50 metres lead etc. complete as per the requirement of site & as per directions of Engineer-in-Charge.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead etc. complete as per the requirement of site & as per directions of Engineer-in-Charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved as per the direction of Engineer-in-Charge or in the area marked by Indore Municipal Corporation (IMC) (Presently it is Devguradia which is around 20 km away from the institute). Rate shall be includive of, lifting of material, transportation, statutory fees, if any of IMC etc. complete as per the requirement of site & as per directions of Engineer-in-Charge.

Dismantling, shifiting, reinstallation, recommisioning of existing solar water heating system including all required accessories and support system etc. complete as per the requirement of site & as per directions of Engineer-in-Charge.

Centering and shuttering including strutting, propping etc. and removal of form for: Columns, Pillars, Piers, Abutments, Posts and Struts etc. complete as per the requirement of site & as per directions of Engineer-in-Charge.

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.: Concrete of M25 grade with minimum cement content of 330 kg /cum etc. complete as per the requirement of site & as per directions of Engineer-in-Charge.

Providing and chemical rebaring 12 mm dia, 300 mm embedment (Make-HILTI) using chemical anchoring system including drilling of holes of required diameter and depth in RCC members using rotary hammer drill or appropriate tools/ equipment, cleaning of holes with compressed air and brush, injecting approved chemical injection mortar HILTI RE 500 and inserting treaded anchoring rod with proper alignment, including threaded rod, bolts. washers, chemical mortar, required accesories etc. complete job in all respects as per manufacturer’s specifications and direction of Engineer-in-Charge.