Construction of 8 Nos Type II Quarters for the CHC Staff at Chandi Tehsil Kasauli Distt Solan HP

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required and approved by the Engineer-in -Charge. Group-A

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required and approved by the Engineer-in -Charge.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required and approved by the Engineer-in -Charge.

2x1.5 Sq. mm.

2x 4 Sq. mm..

2x 16 Sq. mm..

Supplying and drawing following pair of Fire Retardant, PVC insulated 0.5 sq.mm. (FR-Flexible) copper conductor, flat, unarmoured, telephone cable in existing surface / recessed, steel / PVC conduit as required and approved by the Engineer-in -Charge. 1 Pair

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required and approved by the Engineer-in -Charge. 25 mm. dia

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required and approved by the Engineer-in -Charge.

S.P. 5/ 6 Amps one way Modular switch..

5 pin, 5/ 6 Amps Modular socket outlet..

Telephone socket outlet, Modular.

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required and approved by the Engineer-in -Charge.

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required and approved by the Engineer-in -Charge.

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required and approved by the Engineer-in -Charge.

Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation made from (50 mm x 50 mm x 6 mm thick) M.S. angle iron frame, covered with 1.6 mm thick M.S. sheet duly welded on five sides & front side hinged, complete with locking arrangement with sufficient No. vertical and horizontal intermediate switchgear supporting members each of M.S. flat 50mmx6mm thick of suitable length duly welded. The cubical pedestal shall have cable entry box at one or two sides and 4 No. legs of 50mmx50mmx6mm thick M.S. angle iron each 60 cm long including, powder coated painting and bonding to the existing earth etc., the same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form and approved by the Engineer-in -Charge. 300 mm deep (nominal)

Supplying and fixing Aluminum alloy or wrought aluminium strip bus-bars, suitable for 100 Amp. 415 volts capacity 4 No. each of cross-sectional area (25mmx6mm), in the existing enclosure or cubical panel with all accessories including connections etc. as required and approved by the Engineer-in -Charge.

Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required and approved by the Engineer-in -Charge. 100 Amp. -16 KA

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required and approved by the Engineer-in -Charge. Single pole . Cat-A.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required and approved by the Engineer-in -Charge . 40 Amps. Cat-A.

63 Amps. Cat-A.

Supplying and fixing following rating, four pole (three phase & neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required and approved by the Engineer-in -Charge 63 Amps. Cat-A.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required and approved by the Engineer-in -ChargeDouble door-4 way

Double door-16 way

Earthing with G.I earth pipe 4.5 mtr. long and 40mm dia, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required and approved by the Engineer-in -Charge.

Extra for using salt and charcoal for pipe earth electrode complete as required and approved by the Engineer-in -Charge.

Providing and fixing 6 SWG (4 mm dia.) G.I. wire on surface or in recess for loop earthing as required and approved by the Engineer-in -Charge.

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering and approved by the Engineer-in -Charge. Armoured cable 25 sq. mm (3.5 core)

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVCsheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size and approved by the Engineer-in -Charge. Armoured cable 25 sq. mm (3.5 core)

Providing and installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30cm) with 16/.20mm twin twisted flexible cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. required and approved by the Engineer-in -Charge. Ceiling Fan 1200mm Sweep, cat. A

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as requiredand approved by the Engineer-in -Charge. Exhaust Fan, light duty, 300 mm sweep (domestic)

Supplying and fixing of fancy wall bracket containing thread type LED lamp holder (s) of all sizes and shapes, complete with all accessories but excluding LED lamp including making connections, testing etc. as required and approved by the Engineer-in -Charge. Fixed type wall bracket 150 dia, single lamp (Category-A)

Supplying and fixing of fancy wall bracket containing thread type LED lamp holder (s) of all sizes and shapes, complete with all accessories but excluding LED lamp including making connections, testing etc. as required and approved by the Engineer-in -Charge. Mirror Light 460mm, Single Lamp Cat. A

Supplying and fixing of bulk head fitting of all sizes and shapes, containing one No. thread type LED lamp holder (s), complete with all accessories but excluding LED lamp including making connections, testing etc. as required and approved by the Engineer-in -Charge. Bulk head fitting, LED type (Cat-A)

Supplying and erection of street light bracket made of G.I pipe A class of suitable length and dia, the pipe bended to give an angle of 100 to 110 degree fitted with bolt & nuts at the top of existing pole or wall including painting the pipe with two coats of approved paint over priming coat complete in all respects as required and approved by the Engineer-in -Charge. 40mm dia G.I pipe heavy class.

Providing and fixing LED tube light 20W (VIVA mini LED batten 4ft) for Surface and pendant applications. Anodized extruded aluminium housing, high transmissitivity diffuser and high lumen output, product code BCLAB 20W of BAJAJ make or its equivalent make as required and approved by the Engineer-in- Charge.

Providing and fixing LED street light 45 watt with pressure die- cast housing with individual LEDs as light source and lens embedded PC cover having top opening separate drive compartment with IP66 protection and impact resistance of IK 07 ( product code No. BRTFG 45W LED V2) Bajaj or its equivalent make complete as required and approved by the Engineer-in-charge.

Providing and fixing Surface mounted Square LED Down light 8 Watt with aluminium die- cast body finish with drop down PC diffuser to deliver low glare illumination with optimized heat sink for effcient heat dissipation, product code BGSLO SLEEK SURFACE 8W WH SQ of BAJAJ make or its equivalent make as required and approved by the Engineer-in- Charge.

Providing and fixing LED lamp (Bulbs) 10 Watt in the existing fixture as required and approved by the Engineer-in- Charge.

Supplying and fixing of concealed fan box with suitable size of phenolic laminated sheet cover in the front complete in all respect as required and approved by the engineer-in-charge.

MOHINDER KUMAR VERMA