MECHANIZED APPLICATION AND FINISHES INCLUDING MISCELLANEOUS B R WORKS IN CERTAIN MD OTM ACCN AT CDM UNDER AGE B R N NO II OF GE NORTH SECUNDERABAD

Amount

M & L for complete removal of existing treatment on walls, preparing surfaces and make surface free from loose particles oil stains etc. and surface ideally prewetted, applying white cementitious wall care fine putty average thickness 1.5mm complete all as specified and as directed by Engineer-in-Charge.

M & L for Preparation of old plastered or unplastered surfaces of ceiling including cornices, pillasters by brooming down with steel wire brushing scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc applying one coats of oil bound distemper on old ceiling surfaces all as specified and directed.

M & L for Preparation of old plastered or unplastered surfaces of wall including cornices, pillasters by brooming down with steel wire brushing scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc applying one coats of oil bound distemper on old surfaces of walls all as specified and directed.

All as per item 03 above, but applying two coats.

M & L for preparation of old steel surface exc 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

M & L for for preparation of old wood or wood based surface and applying one coat of synthetic enamel paint all as specified and directed.

M & L for for preparation of old decorated plastered/ unplastered surfaces of wall and applying one coat of plastic emulsion paint complete all as specified and as directed.

M & L for for complete removal of existing treatment of Internal / External surface of wall including removing fungus /algae dirt, oil, grease and loose particles by wire brush, cleaning, washing and removing dust. Cracks less than 2 mm, should be cleaned free of dust with a vacuum cleaner, etc., and applying 3.00 mm thick white cement based wall care putty smooth finish complete all as specified and as directed. Make:-Birla White / Asian Paint / Diamond wall putty. Note: Unit rate quoted shall include for necessary scaffolding, trestles, ladders & cradles required for execution of the work and protective works etc.

M & L for for applying 2 coats of weather proof paint over a coat of primer including preparation of old/new putty applied wall/ceiling surfaces and allow it to dry before taking up the first and second coat of paint etc., with fully automatic airless spray machine of paint application complete all as specified and directed. Make: Apex Ultima from Asian Paints or equivalent in All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux. (I) Unit time quoted shall include for necessary scaffolding, trestles, ladders & cradles required for execution of the work and protective works. (II) The rate of application of primer and two coats shall be as per manufacturers instructions. (III) A time gap of eight hours shall be maintained between the application of primer and each coat . (IV) Application of primer and paint shall be done by an authorised applicator of the paint. (V) Necessary spreading and removing coverings to doors, windows, floors, fittings etc to protect them from splashes and cleaning of the doors/windows and floors after carrying out painting shall be made by the contractor. (VI) The user unit will be handed over the as per manufacturers instructions coverage area of qty of material contracted by the MES and same will be issued to the contractor for External periodical services by the user unit.

M & L for cleaning of surface with water using pressure washer machine, fill the crack with acrylic based textured crack filler and applying one coats of modified first quality acrylic exterior emulsion paint of approved shade having silicon additives complete all as specified and as directed.

M & L for preparation of external surfaces of walls and appying two coats of chemical water proofing treatment on wall and chajja terrace and parapet walls, grooves etc. such aS CEMISTIK PU 50 heavy Duty warerproofing coating or equivalent complete all as per manufacturer instruction as directed by Engineer-in-Charge.

M & L for 15mm thick cement plaster in CM 1:6 on bricks or concrete surfaces finishing the surfaces even and fair and provision of sagol finish with two coats of oil bound distemper of any tint over a coat of alkali resistant primer all as specified.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

M & L for 20mm thick granite (of any type) work (table rubbed and polished) in steps , jambs. pillars, window cills, cooking platforms and like in CM (1:4), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Labour only for full round moulding to 18 to 20mm thick granite slab complete all as directed.

S & F in repairs rotational moulded polyethylene water storage tank 3 layer white colour waterr tank, non- toxic effect, algea formation protection (made from Virgin grade of polyetjylene material which is duly stablized with anti-oxident Plastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms) and stop valves for 20mm bore pipe, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends etc complete including dismantling existing water tank all as specified and directed. MAKE :- Cat No. HSWS-0050-02-Pure of M/s SINTEX

S & F in repairs rotational moulded polyethylene water storage tank 3 layer white colour waterr tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetjylene material which is duly stablized with anti-oxidentPlastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms) and stop valves for 20mm bore pipe, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends etc complete including dismantling existing water tank all as specified and directed. MAKE :- Cat No. HSWS-0100-01-Pure of M/s SINTEX

S & F 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified.

S & F 25 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified.

S & F in repairs vitreous china wash down floor mounted coupled water closet with PP soft close seat cover, hinges, fixing accessories and accessories set, size 410x720x800mm, S trap 250mm, flushing cistern with cistern fittings complete all as specified and as directed. Make :- Jaquar Cat No. VGS-WHT-81751 S (Bowl) and VGS-WHT-81201 (Cistern) or equivalent in ROCA/KOHLER

S & F in repairs PVC connection 15mm bore size with two nuts and washers of length 450mm all as specified.

S & F in repairs for corner glass shelf of size 300mm dia and 8mm thick with chromium plated railing, fixed with and including chromium plated bracket complete all as specified and as directed.

S & F in repair brass CP soap dish , fixed to wall with CP brass screws, all as specified and directed. Make: Johnson Altis Cat part No: T3252C or of equivalent in CERA/PAYRRYWARE/HINDWARE

S & F in repairs bib cock long nose quarter turn suitable for 15mm bore pipe with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete all as specified. Make: Johnson VIVA series Cat part No: T4806C or of equivalent in CERA/PAYRRYWARE/HINDWARE

S & F in repairs 32 mm dia bore PVC flexible pipe for WHB of 1m length complete all as specified. Make Pyage/ Polytuff

S & F in repairs Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) complete all as specified and directed.

S & F in repairs plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinging device for pedestal pattern WC/ semi pedestal and pattern WC (anglo India type) complete all as specified and as directed.

S & F in repairs plastic water closet seat (cascade type) black or white closed pattern, solid type with flat bottom, cover and mild steel chromium plated hinging device complete all as specified and as directed.

S & F in repairs plastic water closet seat (wall hung type) black or white closed pattern, solid type of square shape with flat bottom, cover and mild steel chromium plated hinging device complete all as specified and as directed. Make: Hindware equivalent in CERA/PAYRRYWARE

S & F in repairs for hand shower chromium plated (health faucet) 15 mm bore, (ABS body) with wall hook complete all as specified and directed. Cat No. ALD-CHR-593N of make Jaquar or of equivalent ROCA/KOHLER

S & F in repairs for telephonic hand shower with wall hook complete all as specified and directed. Make: CERA/HINDWARE/PARRYWARE

S & F in repairs Toilet paper holder of stainless steel, all as specified and directed. Make: Johnson Fusion series Cat part No: T3254C or equivalent in CERA/PAYRRYWARE/HINDWARE

S & F in repairs towel Rack all as specified and directed. Make: Johnson Fusion series Cat part No: T3256C or equivalent in CERA/PAYRRYWARE/HINDWARE

S & F in repairs towel ring all as specified and directed. Make: Johnson Delta series Cat part No: T1351C or equivalent in CERA/PAYRRYWARE/HINDWARE

S & F in repairs brass spindel of 15mm dia in any size/ type and in any position complete all as specified and directed

S & F in repairs white table top Basin rectangular shape of size 570mm x 385mm x 120 mm fixed in position including waste coupling and PVC waste pipe, 32mm dia. complete Make:Johnson Model Omega Recta Plus, Cat Part No – P7312PW30403 or equivalent in CERA/PAYRRYWARE/HINDWARE

S & F 18 mm thick UV coated exterior grade MDF board duly edge banded with 0.8 mm thick PVC taping, fitting of shutters shall be fixed as approved by GE suitable for cup board etc. including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply

S & F Shelves made of HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white in colour 18 mm thick water resistant, termite resistant, duly edge banded with PVC taping 0.8 mm thick, cut to shape & size of shelves including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply

S & F in repair 200mm long SS decorative soft close zero crank hinges, for kitchen cabnit complete all as specified & directed.

S & F in repairs SS telescopic type ball bearing drawer channel of load bearing capacity not exceeding 45 kg anti-rebound function, manufactured with high grade steel for longevity for easy removal of drawer zinc plated for corrosion resistant suitable for the SS kitchen basket of size not exceeding 500mm complete all as specified and directed.

S & F in repairs SS kitchen basket corrosion resistant, rust free seamless glossy finish, high quality product completely safe for storing food products and kitchen utensils of 18 guage SS 304 grading of size 17"x20"x4" complete all as specified and directed. Make: 1st quality of SLEEK/ HETTICH/ EBCO

S & F in repairs SS kitchen basket corrosion resistant, rust free seamless glossy finish, high quality product completely safe for storing food products and kitchen utensils of 18 guage SS 304 grading of size 17"x20"x6" complete all as specified and direceted. Make: 1st quality of SLEEK/ HETTICH/ EBCO

S & F in repairs SS kitchen basket corrosion resistant, rust free seamless glossy finish, high quality product completely safe for storing food products and kitchen utensils of 18 guage SS 304 grading of size 17"x20"x8" complete all as specified and direceted. Make: 1st quality of SLEEK/ HETTICH/ EBCO

S & F in repair Drapery curtain rod of stainless steel 25mm dia complete with stainless steel brackets and side caps fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw compete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm each complete all as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 Sqm and not exc. 4 Sqm each complete all as directed

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified.

S & F for 40mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 30X6mm all around the shutters complete including two coat of synthetic enamal paint over one coat of pink primer complete all as specified and directed.

S & F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately).

S & F second class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) supplied and fitted to chowkats.

S & F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

S & F in repairs aluminium powder coated three track sliding window with two glazed shutters, one 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.25 mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make as specified. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958, Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

M & L for aluminium powder coated louvered ventilator using rectangular tube of size 63.5x52x1.5mm thick, blade set, with provision of exhaust fan using ‘Jindal” aluminium section or equivalent make as specified including glass 4mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc complete all as specified and directed.

S & F in repairs 3mm thick sheet glass ordinary quality in any type of frames and glazing with oil putty (or beading) in square n. exc. 0.5 Sqm in each pane including hacking out old broken glass from wooden/steel frames complete all as specified.

All as per item No 57 above, but figured glass complete all as specified.

S & F in repairs Stainless steel butt hinges 100mm all as specified and directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less than 38 mm complete all as directed and specified.

S & F in repairs 150mm size mild steel, ordinary rat tail rod pattern spring (helical door spring) with roller and roller plates including welding to angle iron plate or chokhats as required and as specified.

S & F in repairs Stainless steel sliding door bolts, plate type, bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 250 mm long complete all as directed and specified.

S & F in repairs Stainless steel Tower Bolt of 200 mm long fixed with Self Tapping screws complete all as directed and specified.

S & F in repairs Stainless steel Handle of 150 mm long fixed with Self Tapping screws complete all as directed and specified.

S & F in repairs floor door stopper of Stainless steel body and tongue 135 mm anodised with hard drawn steel spring fixed in floor complete all as directed and specified.

Taking down shutters of any description area exc 1 Sqm but not exc 2 Sqm and refixing in same opening including easying adjusting and refixing builders hardware as required including renewal of unserviceable screws, welding etc.complete all as specified. (Renewal of builder's hardware if specially ordered shall be measured and paid for separately)

Taking down shutters of any description area exc 1.5 Sqm but not exc 4 Sqm and refixing in same opening including easying adjusting and refixing builders hardware as required including renewal of unserviceable screws, welding etc.complete all as specified. (Renewal of builder's hardware if specially ordered shall be measured and paid for separately)

M & L for repair to Aluminium door/windows of any size/any description ,taking off from present position and refixing in the same position after tightening ,easing the section as required, including fitting the rubber packing aluminium snap beading, re-setting floor/hydraulic spring etc all as specified .

S & F in repair to 8 mm thick 6063-T-5 Aluminium expendable diamond shape gril for window security mash Decorative of 2.5 cm aperture including nessassary Y Section suitable for the same fixed in aluminum window comlplete all as specified.

M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) including demolition of existing brick work complete all as specified and as directed.

M & L for 15mm thick cement plaster in CM 1:4 on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement with two coats of exterior emulsion paint over a coat of primer on new surface all as specified.

S & F Toughned frosted glass 12mm embedded (If instructed by Engineer in charge/GE) over the glass body as in hinged doors, partitions, automatic doors,cladding and similar work including cutting to shape, drilling holes required complete all as specified and as directed.

S & F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S & F 450mm long stainless steel handle as in glass doors complete all as specified and directed.

S & F in repair Grace bath cabinate wall hung corrosion free and water proof cabinate with DTC high grade stainless steel soft close hinges, cabinet set with slim WHB of size 600mmX 470mm X 460 mm(without Mirror) including shelf in suitable color fixed in position with all necessary fittings including waste coupling and PVC waste pipe, 32mm dia. complete all as specified and as directed. Make: Johnson Grace Bath Cabinet Cat part No: E5580PW(Slim vanity Basin) , E5588SM(Shelf),E5592SM (Wall Mtd Cabinet) or of equivalent make as per Appx 'A' as approved by GE.

S & F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S & F in repairs copper alloy chromium plated Single Lever Extended Basin Mixer (Height-85mm) without Popup Waste System with 450mm Long Braided Hoses all as specified and directed. Cat part No: FUS-CHR-29023B of Jaquar or equivalent in ROCA/KOHLER

S & F in repairs Pillar tap quarter turn suitable for 15mm bore pipe fancy type brass CP screwed for iron pipe or brass ferrule complete all as specified and directed. Make:FUS-CHR-29001 of Jaquar or equivalent in ROCA/KOHLER.

M & L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.

S & F in repairs 2 in 1 CP Angle cock with flange with all other necessary fittings all as specified and directed. Make: Cera/Hindware/Parryware

S & F in repairs 25 mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S & F in repairs Multi L-type jet spray any size incl all other accessories complete all as specified and directed.

S & F in repairs 600mm long stainless steel wall hook rail set for hanging clothes complete all as specified and directed.

S & F in repairs cascade type syphon-set any size incl all other accessories complete all as specified and directed.

M & L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed.

harshraj and co (BID ID -3241812)

M/s GM Constructions (BID ID -3236447)

Sri Associates (BID ID -3241678)