Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹54.6 LAccepted-AOC 385 GROUND FLOOR GANESH MURTI NAGAR CAPTAIN PRAKASH PETHE MARG BACKBAY BUS DEPOT CUFFE PARADE COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹59.9 L+₹2.6 L (4.49%)Rejected-Finance B 13 ROOM NO 2 2 SHIVA PALM BEACH SOCIETY SECTOR4 NERUL WEST NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L2 | Rejected-Finance Other than being lowest | |
| 3 | L3₹63.5 L+₹6.2 L (10.7%)Rejected-Finance 302 SIDDHIVINAYAK APPT A WING MUMBAI K K MARG JACOB CIRCLE MUMBAI CITY MAHARASHTRA 400 011 | MUMBAI | MAHARASHTRA | 400011 | L3 | Rejected-Finance Other than being lowest | |
| 4 | L4₹65.6 L+₹8.3 L (14.4%)Rejected-Finance SHOP NO 10 BMC SHOPPING CENTRE MITHA NAGAR GOREGAON WEST MUMBAI 400 104 | MUMBAI | MUMBAI SUBURBAN | MAHARASHTRA | 400104 | L4 | Rejected-Finance Other than being lowest | |
| 5 | L5₹70.4 L+₹13.0 L (22.8%)Rejected-Finance FLAT NO 002 MAHAVIR VILLA CHS LTD PLOT NO 259 SECTOR 21 NERUL EAST NAVI MUMBAI 400 706 | NAVI MUMBAI | THANE | MAHARASHTRA | 400706 | L5 | Rejected-Finance Other than being lowest |
Tender Value
Refer Docs
EMD Value
₹1.6 L
Closing Date
30 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (NW) Mumbai
Commander Works Engineer NW Dr Homi Bhabha Road Navy Nagar Colaba Mumbai 05
REPAIR REPLACEMENT OF WOODEN COPING AND HARD STANDING IN VARIOUS JETTY AND WHARF AND NAVAL DOCKYARD UNDER GE NW KUNJALI COLABA MUMBAI
2023_MES_623941_1
8562/CWE (NW) Mumbai/E8
Open Tender
Civil Works
Item Rate
180 days
GE (NW) Kunjali
Class C
Category a(i)
7 documents required · 7 mandatory
₹1,000
Yes
GE (NW) Kunjali
₹1.6 L
Yes
20 Jan 2024
18 Oct 2023
2 Dec 2023
18 Oct 2023
30 Nov 2023
23 Nov 2023
18 Oct 2023 - 7 Nov 2023
Amount
Dismantling timber scantlings 40 sq. cm and over in section, in any position in unframed work complete all as specified and directed by Engineer-in-Charge.
Supply & fixing 1st class hardwood (TEAK WOOD) Plain, solid, straight, rebated on the solid, rounded or chamfered segmental size upto (5000mm x 300mm x 150mm to 300mm) as in wooden coping complete all as specified and directed by Engineer-in-Charge.
Supply and fix in repairs MS anchor bolt fastners of size 300mm long and 25mm dia including drilling holes in timber, concreting and grouting as required and complete all as specified and directed by Engineer-in-Charge.
Supply and fix in repairs MS anchor bolt fastners of size 450mm long and 30mm dia including drilling holes in timber, concreting and grouting as required andcomplete all as specified and directed by Engineer-in-Charge. Note: Item No 3 & 4 In case of non availability of required length and dia of fastener bolt, next higher size as available in market will be used for work without any extra price adjustment.
Material & labour for preparation of new decorated wooden surfaces of any description over 10 cm width or girth, applying two coat of synthetic enamel paint over a coat of primer complete all as specified and directed by Engineer-in-Charge.
Material & labour for preparation of old wooden surfaces of any description over 10 cm width or girth, applying a coat of synthetic enamel paint of approved colour complete all as specified and directed by Engineer-in-Charge.
Supply and applying microconcrete of Fosroc, Dr Fixit, or equivalent aroung edges of Dock walls, jetties, corners, grooves, alters, steps, piers and other marine structure after complete cleaning of concrete surface and applying epoxy coat as bonding agent Fosroc's Nitobond or equavalent for bonding between old and new surface, including all lifts, shuttering all as required as per site condition and complete all as specified and directed by Engineer-in-Charge.
Demolition of reinforced cement concrete of any description and in any position not other wise spcifically provided for complete all as specified and directed by Engineer-in-Charge.
Precast RCC (1:2:4) type BI using 20mm graded crushed stone aggregate as in cover slabs and set incement mortar 1:4, complete all as specified. (Reinforcement shall be measured and complete all as specified and directed by Engineer-in-Charge.
Demolition of plain cement concrete of any description and in any position not other wise speifically provided for.
Material & labourP.C.C 1:4:8 type D-2 using 40 mm graded stone aggegate as in sub base complete all as specified and directed
Material and labour for ready mix cement concrete in Pavement/Hard standing (PQC) M-40 of flexural strength of 40Kg/Square in field using minimum 400 Kg of cement per cubic metre laid in bays or as directed with and including steel formwork to sides of concrete spread, compacted and finished in a continuous operation etc, cutting and filling of construction and expansion joint , mixing of recron as per requirement complete all as specified and directed by Engineer-in-Charge.
Material & labour PCC (1:2:4) type B-1 (Using 20mm graded stone aggregate) as in roof/chajja padding for maintaining roof/chajja slope complete all as specified and directed by Engineer-in-Charge.
Supply & fixing welded steel wire fabric, cut to length, fixed to steel members/reinforcement steel, weight per Sqm nexc. 4 Kg complete all as specified and directed by Engineer-in-Charge.
Material & labour 10mm dia over mild steel TMT bars, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not lessthan 0.9mm dia or securing with clips etc complete all as specified and directed by Engineer-in-Charge.
-ditto- all as per item No 15 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed by Engineer-in-Charge.
Formwork to sides and soffits of floor or roof beams, haunchings, girders, bressummers, lintels cantilevers, shelves including supt-ports, overhangs, etc. Also splays between floors and beams, etc. rough finished surface of concrete complete all as specified and directed by Engineer-in-Charge.
Formwork to sides of pillars posts, struts, piers, columns and stanchions square, rectangular or polygonal complete all as specified and directed by Engineer-in-Charge.
Material & labour for machine pressed pre-cast concrete interlocking coloured paver block and shape and size conforming to IS-15658-2006 of 60mm thickness M-35 grade with grey cement and pigmentover 25mm thick sand cushioning complete all as specified and directed by Engineer-in-Charge.
Dismantling wrought or mild steel work of any description complete all as specified and directed by Engineer-in-Charge.
Material & labour for Stainless steel decoravtive railings (grade 316), staircase3 (design and pattern as approved made out of SS pipes, SS flats, SS plates etc. Complete with and including necessary welding , buffing/polishing and fixing complete all as specified and directed.
Material & labour for Stainless steel decoravtive railings chain alloy(grade 316), having 8 mm minimum thickness (design and pattern as approved ) as used to connect two stainless steel post with hooks etc. Complete with and including necessary welding , buffing /polishing and fixingcomplete all as specified and directed by Engineer-in-Charge.
Dismantling plain or corrugated steel sheeting, any gauge or thickness incl Nainital or similar pattern roof coverings complete all as specified and directed by Engineer-in-Charge.
Supply & fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.
Supply & fixing pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, valley gutter, ridge and fixed with crumple joint etc fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.
Supply and fix structural steel framed works such as angle, channel, grating, gate, ladder etc. Confirming to Fe-290, E-165 as in supporting structure of duct, drain edge etc including making good the disturbed portion of concrete surfaces with 1:2:4 type B0 (using 12.5mm graded stone aggregate) complete all as specified and directed by Engineer-in-Charge.
All as per Item No 26 above but MS Plates (Plain or Chequred) channels, square cut or notched (ordinary and counter sunk) forming holes , without any attachment confirming to Fe 410-W (Gde-E-250) quality A complete all as specified and directed by Engineer-in-Charge.
Supply & fixing for rolled mild steel sctions of grade Fe 410-W (Gde-E-250) quality-A as in stairs (framed) including stringers, treads, landing, balusters, hand rails etc, including cleats, brackets etc and similar work complete all as specified and directed by Engineer-in-Charge.
Material & labour for preparation of new steel surfaces of any description over 10cm width or girth and applying Two coat of synthetic enamel paint over a coat of primer complete all as specified and directed by Engineer-in-Charge.
Material & labour for drilling and fixing Rohibb teflon nozzles in RCC members, including drilling holes of 12 mm dia, 50 to 100mm deepholes. Works shall be carried out as under : - (i) Cleaning holes. Clean the holes by air blower prior to fixing nozzles. (ii) Fixing of nozzles. Insert 12 mm dia. Rohibb Teflon nozzles in cleaned holes. External aend of nozzles rto be manchine to receive outlet of grouting gun. Fix it inside the holes by applying thixotropic epoxy putty to ensure complete sealing. Cure the system for min 12 hr. (iii) Cutting of nozzles. Cut the nozzles by chisel after completion of grouting without damaging structural elements. (iv) In case crack upto 2mm wide, fix the injection nozzels directly over the cracks, at intervals of 6 to 9 inches, using a drilling machine. Fix PVC/MS nozzels in these holes with fast-setting epoxy putty & let it dray for 2 to 3 days. Also seal the crack between the ports with epoxy putty. (v) In case crack is wider 2mm upto 4 mm to 5 mm wide drill holes at the sides of crack in a staggered manner , at intervals of 6 inches and affix them epoxy as mentioned above. (vi) Also, seala the face of the crack with a liberal application of the epoxy putty and including scaffolding upto any height.
Material & labour for injecting of site mixed cement slurrry grout, mixed in specifified proportion containining cement ,sand, water with addition of plasticizers approved make) & migratory corrosion inhibitor, water cement ratio shall be varied between 0..5 to 1.0 for each hole, shhrinkage compenensasatingenslurry mixede to a lump free frresh creamy cconsistency, mixing shall be ddone by mixer continuouly stirring mechanically to keep cement particles in suspension. Injection of approved/specifified grout by means of pump at a pressure of 3-5 Kg/cm2 etc complete till the grout mix flows out from the nozzle indicating and including scaffolding upto any height complete filliing of grout in the holes drilled . Make/brand of epoxy grout- Dr Fixit Epoxy injection of Eppco KP-HP-250 of m/s Krishna conchem or shaligrout EIi of STP Ltd.
Material & labourfor injecting Low visosity (3-5cps) high molicular weight monomer by pressure and using mechanized injector gun with accessories till nozzles refuses to accept the grout, including, mixing or material as mixing of material components (Part a&b) in the required quantities as per manufacturer's instruction by weight batching. Grouting fill the grouting gun with concrete penetrating corrosion inhibitor EPCO-KP-100/protectsil CIT or Ferogard 903. Maintain desired pressure in the gun by air compressor ; maintain the pressure at exit (2 to 3kg/Cm2) by monitoring pressure guage at exit grout the material throught prefixed nozzles in the structural elements @ 100ml per nozzle. Repeat the precess for all the nozzles and including scaffolding upto any height complete all as specified and directed by Engineer-in-Charge.
Taking down cement plaster on brick surfaces built in cement mortar including raking out joints, bading for key scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.
Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and fair including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified and directed by Engineer-in-Charge. (Water proofing compound to be measured and paid for separately).
Material & labour for rendering minimum 20mm thick polymer modified mortar in cemet mortar (1:3) with graded quartz sand with additive Monolith - PMM of Fosroc/Krishnaconchem or polymer mortar HB of Dr. Fixit or Shalifix RM SG 01 of STP Ltd. 15% by weight of cement in one coat with and including curing as per manufacturer's instruction complete all as specified and directed by Engineer-in-Charge.
Supply only Integral waterproofing compound complete all as specified and directed by Engineer-in-Charge.
Material & labour for errection & dismantling of MS tubler double scaffolding (H frame) upto height of 30m & with necessary brazing, provision of necessary safety equipment to the skilled workers to carry out the work and covering with green cloths for carring out external face work of walls complete all as specified and directed by Engineer-in-Charge.
Material & labour for preparation of newly plastered or un plastered or un plastered wall surfaces, over 10cm girth applying two coats of 100% acrylic, weather resistant emulson over a coat of exterior wall primer complete all as specified and directed by Engineer-in-Charge and as per manufacturer's instruction
Material & labour for taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthening the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing 20mm thick polymer plaster (1:5:15, cement, sand, polymer) and finally finishing the surface complete all as specified and directed by Engineer-in-Charge. Make :- Dr.Fixit/Sunanda/Chemestik/Fosrok as aprooved. Note :- (New reinforcement and MS Sections will be measured and paid separately)
Material & labour for taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthening the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally covering with Microconcrete and finally finishing the surface complete all as specified and directed by Engineer-in-Charge. Make :- Dr. Fixit/Sunanda/Chemestik/Fosrok as aprooved. Note :- (New reinforcement and MS Sections, microconcrete and form work if required will be measured and paid separately)
Material & labour for preparation of old painted surfaces of steel any description over 10 cms width or girth and applying one coat of synthetic enamel paint on steel surfaces complete all as specified and directed by Engineer-in-Charge.
Material & labour for preparation of RCC/PCC roof structure and an evenly a coat of cold bituminous at 1 Kg per Sqm and applying seating cloth over cold bituminous, finally paving bitumen of any penetration at 2 kg per Sqm complete all as specified and directed by Engineer-in-Charge.
Removing excavated material & debris exc. 1.50 Km but n exc. 25 Km and depositing where in soil. complete all as specified and directed by Engineer-in-Charge.
Anil Industrial Corporation
the bhimani group of companies
Shree Ayyappa Engineering
RAJENDRA CONSTRUCTION
jalandhara construction
siddharth and company
m/s ashoka enterprises
Nexus Infratech
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .