SPECIAL REPAIR OF COMPLETE BUILDING WITH ROOF REPAIR, INTERNAL FITTINGS, FALSE CEILING,TILES AND ELECTRICAL WORK OF OTM BUILDING NO E-135 (SINGLE LIVING OR ACCN) UNDER GE GOLCONDA

Amount

Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings etc complete all as spfd and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc completed all as specified.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish off the premises.

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as spfd and directed.

Demolition of brick work or stone masonary, built in cement mortar complete all as specified and directed.

Dismantling timber scantlings 40 Sq cm and over in section in any position in framed work.

S&F rolled mild steel sections as in roof trusses, (framed), trussed purlins, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat section) including distance pieces, cleats confirming to Fe-410-W (grade E-250 quality 'A') complete all as specified and as directed.

M & L preparation of new steel surfaces description over 10 cm in width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed.

M&L Pre painted galvalume aluminum zinc coating, GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre painted galvalume aluminum zinc coating, GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof coverings / cladding to wall, ridges, gutters etc., fixed with self tapping screws complete all as specified and directed.

M&L for PCC work as in (1:3:6) type C-2 using 40mm graded stone aggregate in foundation filling & mass concrete for Post/Pillars etc all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified.

M & L brick work with fly ash bricks built in CM 1:6 with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius all as specified.

M&L Walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted,built in CM 1:4 complete all as specified and directed.

M&L for rendering 15 (10+5) mm thick on brick, stone or concrete surfaces in cement mortar 1:4 with using WPC @ 3% by weight of cement, surfaces finished even and smooth without using extra cement complete all as specified . (NOTE : - WPC will be measured and paid separately)

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer on wall surfaces complete all as specified.

M&L 15mm thick plastering in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali-resiatant primer and 1.5 mm thick Birla wall care putty on plastered surrfaces complete all as specified.

M&L for complete removel of existing surface of old plastered surfaces of walls and applying two coat of oil bound distemper over a coat of 1.5mm thick wall care putty including primer complete all as specified and directed by Engr-in-Charge.

Supply only integral water proofing compound

Dismantling wall and ceiling boards (fibre, pulp, insulation,etc.) or insulation boards/ slabs/ blankets any thickness, incl cover filltets and grids and S&F for true horizontal level 600x600mm panels false ceiling system using hot dipped galavnized steel sections exposed surface with pre-coated capping, Main Tee of size 24x32mm at every 1200mm c/c maximum, rotary stitched cross Tee of size 24x 27mm at every 1200mm c/c and wall angle of size 19x19mm fixed to perimetre wall. The complete grid is to be suspended at every 1200mm c/c in both directions by using 2mm dia pre straightened GI wire at every 1200mm interval at the main Tee using fine finished tagular edge including 8-9 mm thick Gypsum boards of size 600x600 mm with rear side Aluminium fril and front side PVC lamination.complete all as specified.

Taking up or down for bore of pipes in 15 mm, steel tubing and connections, including cleaning for refixing or removal to store etc completed all as spfd and directed.

Taking up or down for bore of pipes in 20 mm, steel tubing and connections, including cleaning for refixing or removal to store etc completed all as spfd and directed.

S & F 15mm dia GI tubing medium grade and its connection laid in trenches, floor, wall and ceiling etc all as specified and directed

S & F 20 mm dia GI tubing medium grade and its connection laid in trenches, floor, wall and ceiling etc all as specified and directed

M&L for Cutting chases in brick wall, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 10 cm but not exc 20cm girth complete.

Supply and fixed in repair 15 mm bore Bib taps cost copper alloy Chromium plated with fancy type, screwed down, screwed for iron pipe or for brass ferrule

S&F 15 mm dia Stop valves, cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for union with long shank and cu fixed in repairs.

All as per sl item No.28 but concealled stop cock fixed in repairs.

S&F PVC connection 15mm dia, 45 Cms long with brass ferrules on both ends fixed in repairs.

S & F Vitreous China wash basin, white, flat back, size 630x450mm including cutting for & pinning in ends of brackets or erracting stand but exclusive of fixing of supply of waste pipe fixed in repairs.

S&F in repair PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe.

S & F 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement & other end fixed in repairs

S&F Vitreous china Urinal bowl flat back , size of 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete as directed complete all as specified and directed by Engr-in-Charge.

Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls,ceilings or in floors as waste pipe etc.,, Bore of pipes in 32mm, etc completed all as spd and directed.

S & F 15mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, swan pipe, screwed for iron pipe and fixed in repairs

S & F in repair Vitreous China squatting pan , water closet "Orrissa" pattern size 580 X 440 mm white with intgrel footrest incl flush pipe complete including provision of cement concrete.

S&F15 mm dia Brass chromium plated shower rose 125 mm size fixed in repairs

Dismantling of cast iron/AC/PVC pipes100/110mm dia, jointed in cement mortar and taking out of trenches if required

Dismantling of cast iron/AC/PVC pipes 75 mm dia, jointed in cement mortar and taking out of trenches if required

S & F for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, bore of pipe in 110 mm, etc complete all as specifed and directed.

All as per item No. 41 above but fixed to walls. (At any height of building, till 4 floors also).

S & F for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, bore of pipe in 75 mm, etc complete all as specifed and directed.

M&L 110 mm bore PVC( SWR ) bend with oval access doors, incl taking down.

All as per item No. 44 above 75mm dia.

S & F for PVC (SWR) vent cowl, bore of pipe in 110 mm, etc complete all as specifed and directed.

S&F PVC (SWR) bends (size of bore 110mm), complete all as specifed and directed.

M & L for PVC (SWR) floor trap, plain with grating including jointing with solvent cement, diameter of outlet in 75 mm, etc complete all as specifed and directed.

M&L salt glazed stone were gully traps square or rounded mouthed tape & fix 150 x 150 mm fixed in cement concrete complete in repairs

M&L non skid coloured ceramic tiles 7-8 mm thick (square/ rectanglar ) area of each tile exc 0.06 sqm but n'exc 0.11 sqm in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match the surface,laid over and including 15mm thick screed bed or bedding in cement mortar (1:6),complete all as specified and directed.

M&L glazed ceramic coloured tiles in vertical surface 450X300X7mm thick set and and jointed in cement slurry and pointed with white or coloured cement to match , laid over and including 10mm thick rendering in cement mortar(1:4) as backing coat, complete all as specified and directed.

Providing & fixing of Double Rebate windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be paneled with 5 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete for finished item of work.

Supplying and fixing of Fixed Louvered Ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, The section for louvered ventilators should be of 33 x 56 mm Box section panelled with 4 mm pinhead glass with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner bracket . Corner brackets made of CRCA with Zinc Phosphate. The frames to be fixed to the concrete/masonry wall by means of self expanding screws including 10 mm square guard bars with 6" pitch complete for finished item of work.

Providing and fixing door frames fabricated from sections made of galvanized steel powder coated (base steel as per IS 513, galvanized as per IS 277 with zinc of 120 grams / square meter). The factory made section should be with a Powder Coating of pure Polyester Powder of 50-60 microns thick with total coated thickness of 1.25 mm. Size of door frame section should be of 125x60mm with a rebate of 38mm to accommodate 35mm thick door shutter.The frame section should be cut to length and joined by way of welding and each frame should be provided with: a) 2mm thick MS powder coated butt hinges of 100mm long – 3 Nos. for single shutter, 6 Nos. for double shutter. b) CRCA Electroplates stiffeners of 6 Nos. – 3 in each vertical. c) 40mm x 200mm x 1.2mm hold fasts screwed to stiffeners – 6 Nos. with split end tail. d) Nylon Aldrop Receiver – 1 No. for single shutter frame. e)Tie Rod – 1 The door frame shall be filled with 1:3:6 cement Concrete & to be fixed with adjustable lugs/hold fasts. Alternatively dry fixing shall be permitted by using metallic expansion bolt. The rate is including transportation, loading unloading, HOM etc. but excluding the hardware fixtures.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) n exc. 1.5 sqm each and removing to or from store, complete all as specifed and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sqm but n exc 4.00 each and removing to or from store, complete all as specifed and directed.

M&L 2nd class hard wood plain framed panel shutter 35 mm thick (two or three panels) with lock rail and panel of 12mm thick particle board with commercial face veneers on both faces, the size of rail & style as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated, complete all as specifed and directed.

S & F 35 mm thick IInd class hard wood glazed and skelton shutters sizes of members as specified in SSR(Part-I) clause 8.20(a), open rebated and prepared to receive glass or gauge, divided into squares ,edges of framing plain, chamfered or rounded, fitted with cut and miterd beads or rebated sash bars for securing glass or gauge etc. complete all as specified.

S&F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling fixing in opening etc.

S&F solid PVC Panel Door shutter 30mm thick style consisting of Frame made out of M.S Tube for top & Bottom rails, MS Frame shall be covered with heat moulded, Plain colour PVC’C’ channel having a PVC Sheets strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for Top rail, lock rail bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour 5mm thick PVC sheet fitted in the MS Frame, welded/ sealed to stiles and rail with suitable PVC sheet beading and jointed together with solvent cement all as per manufacture instruction all as specified.

S & F 100 MM Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21.

M & L preparation of surfaces of wood based material description over 10 cm in width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as directed.

S & F Aluminium anodised,barrel tower bolts of extruded section and fixed, length of bolt in 200 mm etc complete all as spfd and directed.

S & F 150 mm length of extruded aluminium alloy handles, fabricated type., anodised

S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specifed and directed.

S & F in repairs mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified ( short type, fighter jet aeroplane shape type), complete all as specifed and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar, etc complete all as spfd and directed.

M & L for 20-25 mm thick, Machine cut kota stone slab flooring over 20 mm thick cement screed bed in cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including mirror polishing complete all as specified.

All as per item No 68 above but in patches n. exc. 5 Sqm in area incl all necessary polishing and matching to the existing floor surfaces complete all as specified and as directed by Engr-in-charge.

M & L for 20-25 mm thick Kota stone slab over 15 mm thick rendering in cement mortar 1:3 as in backing coat in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab includingmirror polishing complete all as specified.

Taking down carefully existing point wiring of any description for (light, fan ,sockets bells etc) complete including fittings such as sunken boxes, switches, sockets, ceiling rose, lamp holders, brackets ,fittings, pendants, fan regulartors etc and making good the disturbed surface of walls, floors etc. all as specified and directed.

Taking down existing sub main wiring /Service wire of any description and size including earth wire, batten, conduits and making good the disturbed surfaces of walls, floors etc.

M&L Point wiring for one light point/fan point/bell point controlled by one switch with 1.5 sqmm multistrand copper conductor cable PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable and 1.50 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable ( green colour) as earth lead in and including PVC rigid conduit with all fittings for concealed type on stone / brick, masonary walls, roof etc including new CI/MS sunken box of required size and all as directed by Engineer-in-Charge & 3 mm thick plastic laminated sheet for housing switches sockets, regulators etc. including cutting/running chases, pinning in and making good the disturbed surfaces to match with the existing specification, complete all as specified and directed at site .

All as per item No.73 but One 3 pin 5/6 Amps switch socket outlet on independent board complete all as specified and directed by the Engr-in-charge.

All as per item No.73 but One 3 pin 5/6 Amps switch socket outlet on same board complete all as specified and directed by the Engr-in-charge.

All as per item No.73 but for One 3 pin 15 / 16 Amps switch socket outlet point on independent board with 2.5 sqmm PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable and 2.5 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable (green colour) as earth lead complete all as specified and directed by the Engr-in-charge.

M&L switch piano flush type single pole one way 5 Amps complete all as specified and directed at site.

M&L switch socket combination flush type 5 Amps Multipurpose 2 in 1, 3 pin/5 pin with porcelain base complete all as specified and directed at site.

M&L Switch socket combination 2 in 1 flush type universal 3 pin 5 & 15 Amps complete all as specified and directed at site.

M&L lamp holder insulated body with back plate suitable for battern fittings complete all as specified and directed at site.

S&F Ceiling rose surface bakelite 65 x 50 mm 2/3 terminals complete all as specified and directed at site.

M&L Fan Regulator (Rotary step type, Switch/Socket type Dimmer) 230/240V, AC complete all as specified and directed at site.

S&F 9 W LED bulb of base B22d with color temp 6500K all as specified and directed.

S&F Sheet metal enclosure MCB distribution board including 200 Amps bus-bar single pole and neutral 240V, 8 Ways, double door including taking down of existing sheet metal enclosure complete all as specified and directed at site.

All as per item No-84 above but TPN 4 way, 415 V complete all as specified and directed at site.

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 32 AMP, in the MCB DB Complete with connection testing and commissioning.

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.

S&F MCB Tripple pole and neutral , 63 Amp, 415 Volts AC complete all as specified and directed at site. Make : L&T Haiger/Havells/Legrand.

S&F 25W energy saving and environmental friendly long life LED building security street light made up of pressure die cast aluminium housing with high power LED, lens & toughened glass, potted driver, IP 66 protection including connection with twin twisted unsheathed PVC copper cable of suitable size complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S & F LED light fittings, 1x10 watts bulk head luminaires etc complete with all accessories and including connecting up with twin core twisted flexible PVC copper conduct cabe of 23/0.0076 from ceiling rose all as specified

S&F in repair 36W recess mounting ultraslim LED flat panel 2'x2' made of extruded aluminium frame with high efficient LEDs & glare free opal diffuser, IP20 suitable for armstrong/grid ceiling and making connections with twin twisted unsheathed PVC copper cable of suitable size complete all as specified and directed at site.( Make- HavellsPLANO2X2PLR36WLED84OS)

M&L for Submain wiring with two single core PVC (FRLS) insulated flexible copper conductor cable of size 6 Sqmm and one single core PVC (FRLS) insulated unsheathed flexible copper conductor cable green colour of size 4.0 Sqmm as earth lead in and including PVC conduit medium grade/casing caping with all fittings suitable for concealed/surface type and making good the disturbed wall surfaces to match with existing specification all as required at site complete all as specified and directed at site.

Taking down & refixing of ceiling fan of any make, sweep and dismantling, cleaning , greasing, overhauling and providing two coat of synthetic enamel paint of existing colour and refixing to its existing place including connections with new flexible cable 3 core copper conductor complete after renovation. For Ceiling fan - adjustment for providing new down rod including new canopy, clamp, rubbr reel, capacitor,all as directed.

S&F in repair, fan hook ,fan Rod (4 feet)suitable for hanging of ceiling fan made out of mild steel flat 40x5mm clamp or 12mm dia round bar duly welded/drilled including nuts, bolts and washers and cutting /chisseling, making good disturbed surfaces with cement mortar 1:3 and matching the surfaces by painting complete all as specifed and directed at site.

S&F bracket made out of 40 mm dia GI pipe, light grade, 1.5m long, bend to shape including clamps, nuts and bolts etc and required electrical connections including taking out old unserviceable brackets of any description all as specified and directed .

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.

M&L, in repair, earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized earth wire of 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown on electrical plate No. 3 of MES SSR Part I all as specified and testing on completion including provision of earth lead protected by 15 mm dia light grade GI pipe & watering pipe shall be 20 mm bore medium grade GI pipe including all excavation and earth work, PCC pit with RCC cover, char coal, salt, funnel etc. complete. Note:- Rate quoted by tenderers shall be deemed to include for following provisions:- Excavation & Earth work in any type of soil including removing of surplus material upto 50 m. [i]. PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm made from 8mm TMT bars @ 10 cm C/C both ways with handles. [ii]. Main earthing lead from earth electrode to test point upto 7.5 mtr. [iii]. Funnel with watering pipe [GI pipe] 20mm bore medium grade & copper lugs, charcoal & salt as reqd. [iv]. GI protection pipe of size 15 mm bore medium grade.

PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sq. mm

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out. In hard dense soil including spreading, levelling, watering and well ramming in layers each not exceeding 25cm thick complete all as directed

Returning, filling in soils including spreading, levelling, watering and well ramming in layers not exc 25cm thick all specified and as directed.

Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as directed

Supplying and spreading clean river sand as cable cushioning for protection of cable to be laid in trenches all as per SSR part-I complete all as directed

M&L brick protection with common burnt bricks sub class 'B' of size 230x115x75mm for cable protection complete all as specified and directed

M & L for cutting of road, hard standing made of concrete or premix carpet, WBM, soiling and morrum filling including excavation for laying of cable/pipe all as directed and making good the road/hard standing by using all old/new materials and with PCC (1:2:4) etc, required to match with the existing surface complete all as specified and directed.

Supply and laying 80 mm bore GI tubing (light grade) for cable protection at road crossing on poles and walls including fixing with clamp, saddle, wiring all fittings of following sizes and tubing sealed at both ends after laying the cables complete all as specified and directed

S&F galvanized steel water tubing medium grade of 25mm bore complete with all fittings such as bends elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and pigs, unions including taking up or down existing steel tubing with fittings all as specified and directed.

S&F in repairs gunmetal globe or gate valve with iron wheel head screwed both ends for iron pipe of 25m bore including taking down complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out. In soft/loose soil all as complete all as directed

Cutting/Boring on the existing GI pipe line 20/80mm dia (in position) for insertion of new galvanised Tee up to 80 mm for branch connection incl necessary jointing material comlete all as specified and as directed.

NAYANA CONSTRUCTIONS (BID ID -3376054)

RAM CHARAN CONSTRUCTIONS (BID ID -3373927)

VACON INFRASTRUCTURES (BID ID -3373472)

harshraj and co (BID ID -3375424)

SM CONSTRUCTIONS (BID ID -3373567)

STANDARD AGENCIES (BID ID -3375282)

SRI LALITHA CONSTRUCTIONS (BID ID -3374582)

Sri Lakshmi Enterprises (BID ID -3375921)