Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.7 LAccepted-AOC WZ 250 B 2 GALI NO 08 SADH NAGAR I PALAM COLONY NEW DELHI 110045 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110045 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹36.2 L+₹2.0 L (5.78%)Rejected-Finance RZ D 29A GALI NO 05 SYNDICATE ENCLAVE NEAR DABRI MORE NEW DELHI 110045 | SOUTH WEST DELHI | DELHI | 110045 | L2 | Rejected-Finance Not Being Lowest | |
| 3 | L3₹38.0 L+₹3.8 L (11.1%)Rejected-Finance PLOT NO 10 9 OM VIHAR PHASE 1 A UTTAM NAGAR NEW DELHI 110059 | WEST DELHI | DELHI | 110059 | L3 | Rejected-Finance Not Being Lowest | |
| 4 | L4₹38.8 L+₹4.6 L (13.4%)Rejected-Finance | L4 | Rejected-Finance Not Being Lowest | |
| 5 | L5₹39.0 L+₹4.8 L (13.9%)Rejected-Finance WZ 199 LAJWANTI GARDEN GALI NO 4 NEW DELHI 110046 | NEW DELHI | DELHI | 110046 | L5 | Rejected-Finance Not Being Lowest |
Tender Value
₹49.5 L
EMD Value
₹99,000
Closing Date
25 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (Central) Delhi Cantt-10
GE (Central) Delhi Cantt-10
PROVN OF CERTAIN SANCTION WORK IN THE AREA OF AGE B/R-I UNDER GE CENTRAL DELHI CANTT-10
2022_MES_562583_2
GE/C-65/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE (Central) Delhi Cantt-10
As per NIT
9 documents required · 9 mandatory
₹500
Yes
GE (Central) Delhi Cantt-10
₹99,000
Yes
4 Feb 2023
15 Dec 2022
27 Jan 2023
15 Dec 2022
25 Jan 2023
22 Dec 2022
15 Dec 2022 - 22 Dec 2022
Amount
Roughening of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dusts etc.
M & L for dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.
M&L for Dark Shade / Double charged/ ultracharged Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including provn of 15mm thick screed bed or bedding layer in CM 1:6 etc complete all as specified .
M&L for Dark Shade / Double charged/ ultracharged Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, on vertical surfaces as in skirting, dado & steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including provn of 15mm thick rendering as in backing coat in CM 1:4 etc complete all as specified .
M & L for Granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement to match the shade of granite stone including grinding, nosing and polishing including 20 mm thick screed bed in CM 1:6 complete all as specified.
M & L for Taking down cement plaster in brick walls,including raking out joints,hacking for key,scrubbing down with water etc including scaffolding if required complete all as specified.
M&L for ready mix plaster of 15mm thick on brick or conc surfaces incl necessary cement slurry with bulk density 1.40 to 1.70 kg, water ratio 17 to 19% by weight & compressive strength as per IS 4031 part 6 smooth without using extra cement and applying three coats of white lime wash on newly plastered ceiling surfaces including taking down old plaster on ceiling complete all as specified.
M&L for ready mix plaster of 10mm thick on brick or conc surfaces incl necessary cement slurry with bulk density 1.40 to 1.70 kg, water ratio 17 to 19% by weight & compressive strength as per IS 4031 part 6 smooth without using extra cement and applying three coats of white lime wash on newly plastered ceiling surfaces including taking down old plaster on ceiling complete all as specified.
M&L for ready mix plaster of 5mm thick on brick or conc surfaces incl necessary cement slurry with bulk density 1.40 to 1.70 kg, water ratio 17 to 19% by weight & compressive strength as per IS 4031 part 6 smooth without using extra cement and applying three coats of white lime wash on newly plastered ceiling surfaces including taking down old plaster on ceiling complete all as specified.
M & L for two coats of weather proofing exterior acrylic emulsion paintof DULUX Weather shield Max or APEX ULTIMA from Asian paint over one coat of primer from the same manufacturer complete all as specified and directed.Note :- contractor shall have to render a 05 years guarantee for the effectiveness and a FDR @ 5% of work done shall be given for 05 years complete all as specified and directed by Engineer-in-charge.
M & L for two coat of distemper oil emulsion over a coat of primer and 1-2 mm thick JK Birla wall care putty including preparation of new plastered surface of wall complete all as specified and directed.
M & L for applying white wash three coats on newly plastered surfaces of ceiling including preparation of new surfaces for matching with repaired surfaces complete all as specified and directed.
M&L for Complete removal exising old surfaces of wall / ceilling by scrubbing with hard brushing ,brooming down or steel wire brushing scraping down smoke root mould moss and efforescent salts and treating oil and greasy spots as applicable and washing with water applying two coats of weather proofing exterior acrylic emulsion paintof DULUX Weather shield Max or APEX ULTIMA from Asian paint over one coat of primer from the same manufacturer complete all as specified and directed.Note :- contractor shall have to render a 05 years guarantee for the effectiveness and a FDR @ 5% of work done shall be given for 05 years.
M & L for preparation of old plastered surfaces and applying two coat of oil bound distemper including 1 to 2 mm thick JK Birla wall care putty on wall including removal of existing old surfaces complete all as specified and directed.
M&L preparing old decorated surfaces of ceiling and applying two coats of white wash complete all as specified and directed by Engineer-in-charge.
Cutting chases,of brick walls pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and as directed.
Taking down chowkhat or frame with shutters (without taking off shutters from the frame exc 1.5 sqm but nexc 4 sqm each all as spd.
Taking down chowkhat or frame with shutters (without taking off shutters from the frame n exc 1.5 sqm each all as spd.
S& F steel window including pressed steel frame made of 1.25 mm thick MS sheet of size 125x60mm,double revated with side hung and glazed and gauged bar incl box type hinges,steel handles and peg stay,tower bolts complete with glaze and gauge shutter devotailed or welded incl one shop coat of red oxide primer (Wire gauge and glass panes shall be measured seperately) incl M & L for providing PCC type B-1 ,1:2:4(using 20mm graded stone aggregate) to fill the frame and making good complete all as specified and directed by Engr -in- Charge.
S & F anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified & directed.
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 sqm in each pane all as spd.
S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm all as spd.
S & F as pressed steel frames (125x60) mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. providing PCC type B-1 ,1:2:4(using 20mm graded stone aggregate) to fill the frame and making good complete all as specified and directed by Engr -in- Charge.
S&F 35 mm thick 2nd class hardwood glazed and skelton shutters open rebated and prepared to receive glass / gauze etc ( without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of members of shutters as specified in SSRpart-i section 8 clause 8.24(a) ); supplied and fitted to chowkats complete all as specified and directed.
S and F 35 mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified & directed.
Supply and fix 300 mm long mild steel sliding door bolt, bolt type stove enameled black with bright bolt not less than 12 mm dia with an including a minimum of six bolts and nuts (four on bolt plate and two on staple plate) complete all as specified and directed.
S & F 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified & directed.
S & F extruded aluminum alloy handles fabricated type and anodised of size 150mm complete all as specified & directed.
Supply only butt hinges medium weight stainless steel 100mm size complete all as specified & directed.
S & F 100 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
S&F solid PVC door frame of size 50 x 47 mm made out of 5mm thick plain colour PVC sheet re-inforced with MS square tube, supplying and fixing in opening as per manufacturers instructions drawings and specifications complete all as specified and directed.
S&F factory made solid PVC moulded door shutter, 28 to 30 mm thick (Stiles), with 2,4 or 6 raised panel design with 2 mm thick 3D wood grain Moulded PVC sheet Polyurethane painted on the front face and 2 mm plain color PVC sheet on back face as per specification and drawing complete all as specified.
M&L for two coats of synthetic enamel paint over a coat of pink primer on new wood or wood based surfaces not otherwise described over 10 cm width or girth incl preparation complete all as spd.
M&L for preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.
S & F in repair rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, 1000 ltrs capacity.including float valve 20mm size including disconnecting of existing water tank complete all as specified & directed.
S & F in repair 500 ltr capacity three layer white colour rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old water tank all as specified in SSR Part I .
Taking up or down 15 mm dia steel tubing and connection incl cleaning or removal to store all as specified
Taking up or down 20mm dia steel tubing and connection incl cleaning or removal to store all as specified
M & L for 15mm bore galvanised steel water tubing medium grade with all fittings (ISI Marked) and fixed complete to walls and or laid under floors etc complete all as specified & directed.
M & L for 20mm bore galvanised steel water tubing medium grade with all fittings (ISI Marked) and fixed complete to walls and or laid under floors etc complete all as specified & directed.
Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.
Material and labour for cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in plinth protection 75 mm thick laid in bays and surfaces finished even and smooth without using extra cement & filling the joints with bituastic filling complete all as specified and directed.
M & L in repairs PVC connection 15mm dia of standard pattern 450mm long, with two Nos brass check nuts (adopts) and washers etc complete all as specified.
S & F 75 mm bore cast iron soil waste and vent pipe (ISI marked) sand cast in any length with or without ears, with cement joint laid in trenches or in floors or fixed to wall complete all as specified and directed.
S & F 100 mm bore cast iron soil waste and vent pipe (ISI marked) sand cast in any length with or without ears, with cement joint laid in trenches or in floors or fixed to wall complete all as specified and directed.
S&F in repairs PVC waste pipe of standard pattern, 32mm bore socketed end 600mm long for wash basin complete all as specified & directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.
M & L for framed work as in doors, sun shade or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-410W-Gde-250 quality A complete all as specified and directed.
S&F in repairs decorative type wooden finish drapery rod,25 mm dia incl side caps and wooden brackets,wooden rings @12 cm distance centre to centre complete all as specified.
S&F in repairs fancy type CP brass shower rose with flat panel 125 mm size suitable for 15mm bore pipe complete all as specified and directed .
S & F in repair fancy type brass CP angle valve 15 mm dia complete all as specified.
S&F in repair fancy type brass chromium plated bib tap for iron pipe of 15mm bore fancy type with flynut capstan head, screwed down high pressure complete all as specified.
M & L for cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregates as in roof kerbs, or mud stops, rounded or chamfered on edges, coping complete all as specified.
Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles
M & L for brickwork with subclass- ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified & directed.
All as per Ser Item No 55 here-in-before but except bricks using bricks retained from Sr Item No 55.
M&L for 18/19mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination fixed with screws to timber frame work as in cup board shutter, loft shutters incl 6 mm thick teak wood lipping and necessary rebating for shutters wherever required including polishing to lipping/rebating complete all as specified.
S&F continuous (Piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 40 mm, complete all as specified.
Supply and fix MS 40mm dia, cup board knobs, glossy finish, fixed with nuts, screw and washer complete all as specified and as directed.
Supply and fix door magnet suitable for cupboard shutters complete all as specified and as directed.
S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and as directed.
S&F in repair vitreous china squatting pan (Orissa pattern) long pan (including provision of lime concrete bedding) of size 580x440mm white with intergral footrest including providing 100mm bore CI 'P' or 'S' trap complete all as specified (excluding flushing cistern and flush).
S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including bends any radius.
M and L Providing & Fixing False ceiling with semi perforated 12mm thcik micro tegular edged at all heights with GRG (Glass Fibre reinforced Gypsum) false ceiling tiles of size 595x595mm of approved texture, design and pattern having moisture content less than 2%,humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 475 (part-4)-1970 and light Code Description unit rate No 429 SUB HEAD :26.0 NEW TECHNOLOGIES AND MATERIAL reflectance of 85% minimum to be laid in true horizoatal level suspended on interlocking metel T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @ 120 grams oer sqm including both sides) comprising of main-T runners of size 15x32mm of length 3000mm, vross-T of size 15x32nn of lenght 1200mm amd secondry itermediate cross-T of size 15x32 of lenght 600mm to form grid module of size 600x600mm, suspended from ceiling using galvanised mild steel items (galvanising @ 80 grams per sqm) ie. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on perimeter wall/partition with the help of plastic rawl pluhs at 450mm center to center and 40mm long dry wall screws. The work shall be carried out as per specification, drawing and as per direction of the Engineer-in-charge. Make: Diamond, Duratuff, Aerolite or equivalent.
S and F in repairs vitreous chinaware coloured wash counter wash hand basin size 600x400x185 mm complete including ,CP waste coupling ,waste pipe ,complete fixing arrangement and cutting for and pinning in wall and making good complete all as specified and directed by Engg.in.charge .
S and F in repairs Glass shelf assembly 450 mm long 150 mm wide with cp railing complete all as specified and directed .
M&L for roof treatment as per the description below:- M&L for Plain cement concrete average 50 mm thick 1:2:4 type B0 (using 12.5 mm graded stone aggrigate )for levelling course for providing slope in the roof @ 1:40 gradient. a) M&L for preparation of roof surfaces and apply a coat of hot blown 85/25 grade bitumen conforming to (IS-702 @ 1.20 kg/Sqm on prepared surfaces. b) Laying APP (Atatic Polypropylene) modified five layered membrane 3 mm thick and weighing not less than 4 Kg/Sqm with centre core 160 GSM/ Sqm ; core reinforced and laid with 75 mm side overlap and 150 mm end lap. The membrane shall be laid with LPG torch application and overlaps sealed and finished neatly as per the manufacturer specification And apply two coat of silver aluminum paint .
M & L for non skid ceramic coloured tiles of 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 sqm but nexc 0.18 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white/coloured cement to match with the shade of tiles and including cement screeding 15mm thick in cement mortar 1:6 complete all as specified and as directed.
M&L for Non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or oloured cement to match incl 15mm thick screed bed or bedding layers in cement mortar ( 1:6) complete all as specified and as directed.
M & L for Glazed ceramic coloured tiles 600x 300 x 9 to 10mm thick in dado, set and jointed in neat cement slurry and pointed in colour cement to match including rendering 10mm thick in cement mortar 1:4 complete all as specified and as directed .
Material and labour for coloured glazed ceramic tiles 450x350 mm 7 mm thick in vertical surface set and jointed in neat cement slurry and pointing in coloured cement laid/fixed over 10 mm thick cement mortar (1:4) back coat complete all as specified and directed.
M&L aluminium alloy powder coated door including frame and channel of section (Door frame single grove 101.6mm x44.45 mm x2.1,shutter top section 47.62mm x44.45x1.95mm thick shutter bottem vertical section 85 mm x44.45 mm x1.80mm yhick ,shutter middle section 83.50mm x 44.45 mm x1.80mm thick shutter glazing clips weighing not less than 0.097 kg/Rm as directed and approved by GE and as per IS specification including provn of 5.5mm thick tinted glass/12mm thick thick prelaminated particle board as required including handle ,tower bolt ,floor spring heavy duty "SAMRAT" ,looking arrangement "GODREJ" rubber gasket and door stopper complete all as specified and directed.
S&F in repair stainless steel gratings 100mm bore size fixed with cement motar.
S&F 75mm cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified
S&F 100mm cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified & directed.
S&F 75mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified & directed.
S & F in repairs brass chromium plated WHB mixture (Mounting type) pillar tap fancy type mounted with lettered "Hot or Cold" with long screwed shank and fly nuts suitable for 15mm bore GI pipe complete all as specified & directed.
S & F in repairs brass chromium plated wall mixture fancy type mounted with lettered "Hot or Cold" bend 3 IN 1 pattern fixing and connection to pipes with long screwed shank and fly nuts suitable for 15mm bore GI pipe complete all as specified & directed.
S & F in repair Brass CP toilet paper holder complete as per sample fixed to walls with screws and gutties all as specified and directed.
S&F in repairs tubular towel rail, 20mm dia, ‘D’ type 60cm long between flanges of aluminium anodised all as specified.
S&F 15 mm dia Brass CP mixer long Neck for sink mixing hot & Cold water screwed down for iron pipe and fixed complerte all as specified and directed by Engineer-in-Charge.
S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.
Supply & Fix stainless steel soap dish complerte all as specified and directed by Engineer-in-Charge.
S&F in repairs PVC Low level flushing cistern 10 ltr capacity incl internal fittings,sypons,handle,bend etc incl 2 Nos CI brackets complete all as specified.
S&F factory made PVC kitchen and cupboard frame of the size 75mmx40mm with a wall thickness of 4mm, made out of extruded 4mm thick prelam PVC sheet reinforced with 15mmx15mm MS tube of 19 gauge thickness througout the fame and mitre cut at two corners and jointed with 2 Nos of 150mm long brackets of 10mmx10mm MS tubes.The door frame shall be fixed to the wall using 65/100mm long MS screw through the frame by using PVC fastners . A minimum of 4 Nos. of screws to be provided for each vertical member and minimim 2 Nos for Horizontal members Complete all as per manufacturers specifications and as directed.
S&F PVC 18/19mm thick PVC moulded solid board, one side prelaminated for cabinet boxes,shutters etc. with shelf and shutters full size fitted under /above kitchen cooking platform and other platform complete all as direction of the Engr-in-Charge and the manufacturers specifications and drawings.
M&L for applying two coats of cement base paint, white or tinted on new wall surface including preparation of surface complete all as specified & directed.
Excavation in trenches (soft/loose soil) n exc. 1.5m wide and n exc 1.5 m in depth for foundation etc. and getting out complete all as specified & directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.
M & L for removing excavated material exc. 250m but not exceeding 500m and depositing where directed complete all as specified & directed.
M & L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified & directed.
M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified & directed.
M&L for 15mm thick rendering on fair face of brick wall surface in CM 1:4 even & fair finishes as specified and as directed.
Supply and laying DWCPE (SN8) 200mm dia pipes and snap fit coupler incl testing and laid properly, jointed laid in trenches to a level on cocrete bed complete all as specified and directed by Engineer-in-charge.
M&L for providing plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation and mass concrete complete all as specified.
Material and labour for medium duty perforated precast machine pressed drain cover slab 80 mm thick of PCC 1:1.5:3 type B-1 and 10mm TMT bars ,including flat iron 150mmx6mm all around the slab and 40mm dia hole at 100mm C/C , size of slab as required at site and complete all as specified and directed.
Excavating over areas, n exc 1.5 m deep and getting out in depth for foundation etc. and getting out all as specified.
All as per Srl item No 98 here-in-before but exceeding 1.50m & n.exc. 3.00mm depth.
M & L reinforcement cement concrete 1:1.5:3 nominal mix (using 20mm graded aggregate) for slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slab and in shelves and this like all as specified.
M & L for formwork to soffits of suspended slabs such as roof slabs, floors slabs, landings and similar work not exceeding 200mm thick (horizontal or sloping) for rough finished surface complete all as specified & directed.
M&L for mild steel TMT bars 10mm dia and over cut to length,bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified
All as per ser no 102 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed
M&L for 200mm sail-glazed stoneware drain pipes laid in trenches and jointed mplete all as specified and as directed. .
M&L for cement concrete 1 : 4 : 8, type D2, using 40mm graded stone aggregates incl beding, packing under and haunching against the sides for 200mm internal dia of pipes, after they are laid and tested complete all as specified (thickness of concrete bed 100mm).
S & F in repairs floor mounted EWC one piece incl all necessary fittings complete all as specified and directed by Engr -in-charge.
Demolition of stone slab and tiles of any description or thickness in floor apron etc complete all as specified and directed.
Demolition and breaking up rain water pipes (CI,AC,PVC etc) set in any cement mortor of any diameter incl bends.
Removing of existing water proofing treatment of APP and removing of debris outside all as directed
Disconnecting existing water tanks, setting aside (or lowering if required) for cleaning,repairing and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes and reconnecting and refixing in position for tanks capacity exc 500 and n.exc 1000 ltr complete all as specified
Schedule of Credit
SHREE RAM BUILD TECH
LAMBA ENTERPRISES
M/s SAAR ENGINEERS
M/S MSD & Associate
M/S ANIL KUMAR
ANSH VANSH CONSTRUCTION COMPANY
M/S.M.S.Devi.Const.Co
Ex Serviceman Enterprises
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .