Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.9 LAccepted-AOC H NO 982 SECTOR 16 STREET NO 17 SARASWATI VIHAR DERABASSI DISTT SAS NAGAR PB 140507 | S A S NAGAR | PUNJAB | 140507 | ₹47.9 L Quoted ₹48.0 L | L1 | Accepted-AOC L1 QUOTED |
| 2 | L2₹48.5 LRejected-AOC 368 PHASE 4 SAS NAGAR MOHALI 160059 PB | S A S NAGAR | PUNJAB | 160059 | ₹48.5 L | L2 | Rejected-AOC L2 QUOTED |
| 3 | L3₹49.0 LRejected-AOC | ₹49.0 L | L3 | Rejected-AOC L3 QUOTED |
| 4 | L4₹49.4 LRejected-AOC 5021 1 CAT III MODERN HOUSING COMPLEX MANIMAJRA CHANDIGARH | CHANDIGARH | CHANDIGARH | 160001 | ₹49.4 L | L4 | Rejected-AOC L4 QUOTED |
| Sl No | Description | Qty | Unit | SUDESH ENTREPRISES L3 | jmv engineers L1 | Baba Engineers and Contractors L2 | M/s APEX ENTERPRISES L4 |
|---|---|---|---|---|---|---|---|
| .01Note :The unit rate quoted by the tenderer under Col No (13) of Sch `A’ (BOQ) unless specifically mentioned otherwise such as labour only/fixing only, for all items of works shall be deemed to be including cost of all materials, labour, tools and plants, testing and commissioning of work in position complete as required for entire completion of work. | |||||||
| 1.00 | Material and labour, cleaning the new or old pastered or concrete surfaces and water proofing treatment of roof horizontal surfaces consisting as under:-
(i) Remove existing water proofing treatment including brick/concrete tile ,Mud phuska etc.including removing the retrieved material to a place earmarked by civic body, Picking, sweeping clean and washing down with water to remove dust. While doing the treatment on existing roof, concrete should be thoroughly inspected for any significant distress. Such distress, if any repaired/rehabilitated and treated.Existing Pipes over roof should be realigned as directed by the Engineer-in -Charge.
(ii) Providing and laying/fixing TPO (Thermoplastic Polyolefin) waterproofing membrane (min 1.2mm thickness) on prepared surface of roof & up to 300 mm of parapets and crumple joint including junction of roof and parapet.
Method: TPO membrane is mechanically anchored in the roof deck using fasteners and washers, which are then overlapped with TPO membrane and heat welded. The overlap completely encapsulates the fastener, which is not exposed to any external weathering – ensuring no water, heat seeps into the insulated panel. The roof edges of the building are covered with TPO edge trims, mechanically anchored and heat welded with TPO on top – thus completely encapsulating the system, preventing any wind from blowing beneath the TPO or roof. Review attached methodology to understand the system. Providing and fixing Smartcare TPO Membrane Single PLY -FR is a high performance, heat weldable, thermoplastic polyolefin (TPO) sheet, manufactured, designed for waterproofing and heat shielding roofs of new and existing buildings.
Contd/--- | 2,120 | SQUARE METRE | 1,600 ₹33.9 L | 1,450 ₹30.7 L | 1,600 ₹33.9 L | 1,550 ₹32.9 L |
| 1.01Contd item No 1 above/---- Top layer white & bottom layer grey with texture on top layer. Based on advanced polymer chemistry, the membrane is designed for weather resistance and fire protection, sustaining cycles of hot, cold, wet and dry environmental conditions, remaining flexible over years, maintaining its integrity and continuing to provide protection from water seepage and heat. High mechanical properties of the membrane ensure superior puncture resistance, breaking & tearing strength, while enabling excellent heat weld for fusion along the edges. High mechanical properties of the membrane ensure good puncture resistance, breaking & tearing strength, while enabling excellent heat weld for fusion along the edges.SC TPO membranes are further formulated to provide high solar reflective index,Cleaning the surface,roof padding where necessary and laying as per manufacturer’s instructions. Make: ASIAN PAINTS TPO or equivalent product of M/s MC Bauchemie / CIPY / SIKA / Pidilite Dr Fixit TPO membrane Notes : The work for Roof treatment shall include the following and the rates quoted by the bidders shall include the same :- (a) The work pertaining to Roof treatment shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials after approval by the GE . (b) Sample patch of 10Sqm be prepared considering all the items of Roof treatment and shall be got approved from GE prior to carrying out further work. (c) The work shall be carried out completely as per manufacturer’s specifications and application methodology. Execution to be done with authorized trained/skilled applicator of manufacturer as per the technical guide lines laid by manufacturer. (d) All the material brought by the contractor for this work will be verified through a BOO for full material convined by the GE office after receipt of intimation from the Engineer-in-Charge for convening of BOO. Contd/--- | |||||||
| 1.02Contd item No 1 above/---- (e) The Contractor shall submit ink Signed copy of "Memoradum of Understanding" (MOU) with at least one of the manufacturers mentioned in the contract for the approval of Garrison Engineer before commencement of work within one month of Acceptance of tender . If MOU not submitted within specified period penalty @ 5% shall be leived upon contractor and if further delay will continue than his contract will liable be cancelled at his default as per the contract provision . (f) The defect liability period of water proofing treatment to RCC roof slab including sunken floors shall be 10 years and the contractor shall be responsible to keep the entire building(s) free from leakage/seepage for a period of 10 years after certified date of completion. The contractor shall obtain similar guarantee from the specialist firm engaged by him for the purpose to be given by after completion of Water Proofing work before payment . (g) An amount equal to 5.0% worked out on the cost of waterproofing treatment at contract rates towards guarantee shall be retained from the Final Bill as specified in P. S, Cluase no11.3 of CA. (h) The quoted rate shall deemed to be included for necessary temporary arrangement of water supply from existing connection to toilets, bathrooms and kitchen for convenience of the occupants staying in quarters until completion of entire roof treatment and no any extra payment (j) Dismantled material should be removed manually using stair all as directed by Engineer-in-Charge. (k) Roof padding will be paid separately against respective item of BOQ. | |||||||
| 2.00 | Plain cement concrete (1:2:4) type B-1 using 20 mm graded mechanically crushed stone aggregates as in roof padding to maintain the required slope or to prepare gola etc icluding weathering slightly ropunded or chamfered angles and throating as directed including necessary form work in and including demolition of (un-reinforced) cement concrete of any description or as roof padding and coveringg concrete in any position not otherwise specifically provided for including removing the retrieved material to a place earmarked by civic body, complete all as specified and directed by Engineer-in-Charge.
Note:- (i) Dismantled material should be removed manually using stair all as directed by Engineer-in-Charge. | 106 | CUBIC METRE | 2,000 ₹2.1 L | 4,000 ₹4.2 L | 3,000 ₹3.2 L | 4,020 ₹4.3 L |
| 3.00 | Cement concrete tiles 25cm x 25cm x 22 mm thick machine pressed bedded on 15 mm thick screed bed in cement moratr 1:6,set jointed and pointed in neat cement slurry in floors, and cut and polished with grey cement and no pigment etc, complete all as specified and directed by Engineer-in-Charge. | 2,120 | SQUARE METRE | 300 ₹6.4 L | 500 ₹10.6 L | 420 ₹8.9 L | 460 ₹9.8 L |
| 4.00 | Steel water tubing, 15 mm bore medium grade ISI Marked, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors,cutting existing steel tubing & screwing, if required for alterations and additions in and including taking up or down existing unservicable tubing and connections, cleaning for re fixing or removal to store, complete all as specified and directed by Engineer-in-Charge.
Note: Fittings & specials as required shall be provided by the contractor. Contractor's rate shall be deemed to include the cost of fittings provided. | 30 | RUNNING METRE | 500 ₹15,000 | 250 ₹7,500 | 180 ₹5,400 | 230 ₹6,900 |
| 5.00 | Re-fixing of serviceable steel water tubing of 15 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling in and including taking up or down serviceable steel water tubing and connections, complete all as specified and directed by Engineer-in- Charge | 80 | RUNNING METRE | 200 ₹16,000 | 50 ₹4,000 | 60 ₹4,800 | 70 ₹5,600 |
| 6.00 | Steel water tubing, 20 mm bore medium grade ISI Marked , galvanized with all fittings and fixed complete to walls, ceiling or laid in floors ,cutting existing steel tubing & screwing, if required for alterations and additions in and including taking up or down existing unservicable tubing and connections, cleaning for re fixing or removal to store, complete all as specified and directed by Engineer-in-Charge.
Note: Fittings & specials as required shall be provided by the contractor. Contractor's rate shall be deemed to include the cost of fittings provided. | 20 | RUNNING METRE | 500 ₹10,000 | 300 ₹6,000 | 380 ₹7,600 | 270 ₹5,400 |
| 7.00 | Re-fixing of serviceable steel water tubing of 20 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling in and including taking up or down serviceable steel water tubing and connections, complete all as specified and directed by Engineer-in- Charge | 120 | RUNNING METRE | 200 ₹24,000 | 50 ₹6,000 | 100 ₹12,000 | 80 ₹9,600 |
Updated dates
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
27 Apr 2026, 6:00 pmClosed
GE (AF) Chandigarh
GE (AF) Chandigarh,12wg Air force chandigarh
REPAIR/MAINT TO ROOF, CHAJJA AND OTHER MISC WORKS AT VARIOUS LOCATIONS OF SECTOR 31 AND 47 CHANDIGARH UNDER GE (AF) CHANDIGARH
2026_MES_752849_2
GE (AF)/CHD/T-71/2025-26
Open Tender
Civil Works
183 days
Chandigarh
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
GE (AF) Chandigarh
₹90,000
Yes
29 May 2026
4 Apr 2026
4 May 2026
4 Apr 2026
27 Apr 2026
13 Apr 2026
4 Apr 2026 - 8 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
Material and labour, cleaning the new or old pastered or concrete surfaces and water proofing treatment of roof horizontal surfaces consisting as under:-
(i) Remove existing water proofing treatment including brick/concrete tile ,Mud phuska etc.including removing the retrieved material to a place earmarked by civic body, Picking, sweeping clean and washing down with water to remove dust. While doing the treatment on existing roof, concrete should be thoroughly inspected for any significant distress. Such distress, if any repaired/rehabilitated and treated.Existing Pipes over roof should be realigned as directed by the Engineer-in -Charge.
(ii) Providing and laying/fixing TPO (Thermoplastic Polyolefin) waterproofing membrane (min 1.2mm thickness) on prepared surface of roof & up to 300 mm of parapets and crumple joint including junction of roof and parapet.
Method: TPO membrane is mechanically anchored in the roof deck using fasteners and washers, which are then overlapped with TPO membrane and heat welded. The overlap completely encapsulates the fastener, which is not exposed to any external weathering – ensuring no water, heat seeps into the insulated panel. The roof edges of the building are covered with TPO edge trims, mechanically anchored and heat welded with TPO on top – thus completely encapsulating the system, preventing any wind from blowing beneath the TPO or roof. Review attached methodology to understand the system. Providing and fixing Smartcare TPO Membrane Single PLY -FR is a high performance, heat weldable, thermoplastic polyolefin (TPO) sheet, manufactured, designed for waterproofing and heat shielding roofs of new and existing buildings.
Contd/--- | - | SQUARE METRE | - | - | |
Contd item No 1 above/----
Top layer white & bottom layer grey with texture on top layer. Based on advanced polymer chemistry, the membrane is designed for weather resistance and fire protection, sustaining cycles of hot, cold, wet and dry environmental conditions, remaining flexible over years, maintaining its integrity and continuing to provide protection from water seepage and heat. High mechanical properties of the membrane ensure superior puncture resistance, breaking & tearing strength, while enabling excellent heat weld for fusion along the edges. High mechanical properties of the membrane ensure good puncture resistance, breaking & tearing strength, while enabling excellent heat weld for fusion along the edges.SC TPO membranes are further formulated to provide high solar reflective index,Cleaning the surface,roof padding where necessary and laying as per manufacturer’s instructions.
Make: ASIAN PAINTS TPO or equivalent product of M/s MC Bauchemie / CIPY / SIKA / Pidilite Dr Fixit TPO membrane
Notes : The work for Roof treatment shall include the following and the rates quoted by the bidders shall include the same :-
(a) The work pertaining to Roof treatment shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials after approval by the GE .
(b) Sample patch of 10Sqm be prepared considering all the items of Roof treatment and shall be got approved from GE prior to carrying out further work.
(c) The work shall be carried out completely as per manufacturer’s specifications and application methodology. Execution to be done with authorized trained/skilled applicator of manufacturer as per the technical guide lines laid by manufacturer.
(d) All the material brought by the contractor for this work will be verified through a BOO for full material convined by the GE office after receipt of intimation from the Engineer-in-Charge for convening of BOO.
Contd/--- | - | - | - | - |
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.47 MB
Tender71-25-26.pdf
Tender Documents • 1.33 MB
BOQ_850326.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid