REPAIR/MAINTENANCE OF LT CABLES, LT PANELS, AND SWITCH GEARS AND CONNECTED WORKS AT DIFFERENT SUBSTATIONS SUCH AS SION ,COLABA , LOS, KALINA CAMP AT AFS MUMBAI UNDER GE AF THANE

Amount

Excavation in trenches n. exc. 1.5 M in width and 1.5 M in deep for laying of pipes and getting out in Soft / loose soil complete all as specified and directed

Excavation in trenches n. exc. 1.5 M in width and 1.5 M in deep for laying of pipes and getting out in hard /dense soil complete all as specified and directed

Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc. 25 cm complete all as specified and directed.

Removing excavated material n. exc. 50 M away, depositing as directed at level n. exc. 1.5 M above starting point complete all as specified and directed .

M&L for providing crushed stone sand cushioning to UG cable including punning down of sand in layers complete all as specified and directed

Takingout serviceable unreinforced precast concrete cable cover factory made embossed the mark “LT CABLE” class LV type1 flat size 250x150x40 mm during excation of trenches and relaying after cable laying in trenches all as specified and directed

Supply and laying unreinforced precast concrete cable cover factory made embossed the mark “LT CABLE” class LV type1 flat size 250x150x40 mm laid in trenches complete all as specified and directed

Taking down GI pipe laying in trenches for UG cable protection of any sizes pipe complete all as specified and as diercted.

Supply and lay in trenches / along the wall / floor pipes GI light grade of size 50 mm with and including all fittings and accessories for cable protection complete all as specified and directed

Supply and lay in trenches / along the wall / floor pipes GI light grade of size 80 mm with and including all fittings and accessories for cable protection complete all as specified and directed

Taking down any sizes of of LT UG cable XLPE with aluminum conductor multistranded , PVC insulated and PVC sheeted heavy duty 1100 Volts grade under ground cable complete all as specified and as directed.

Supply and lay cable XLPE Insulated armored, heavy duty electric power cables (heavy duty) 1100 Volts grade cross sectional area with stranded aluminium conductor of size 10 sq mm 4 Core complete all as specified and directed.

Supply and lay of LT UG cable XLPE with aluminum conductor multistranded 1100 volts grade in armored, heavy duty electric power cables (heavy duty) 1100 Volts grade cross sectional area with stranded aluminium conductor of size 16 sq mm 4 Core complete all as specified and directed.

Supply and lay of LT UG cable XLPE with aluminum conductor multistranded 1100 volts grade in armored, heavy duty electric power cables with stranded aluminium conductor, 1100 volts grade, cross-sectional area of size 25 sq mm 3.5 Core complete all as specified and directed.

Supply and lay of LT UG cable XLPE with aluminum conductor multistranded 1100 volts grade in armored, heavy duty electric power cables with stranded aluminium conductor, 1100 volts grade, cross-sectional area of size 35 sq mm 3.5 Core complete all as specified and directed.

Supply and lay of LT UG cable XLPE with aluminum conductor multistranded 1100 volts grade in armored, heavy duty electric power cables with stranded aluminium conductor, 1100 volts grade, cross-sectional area of size 50 sq mm 3.5 Core complete all as specified and directed.

Supply and lay of LT UG cable XLPE with aluminum conductor multistranded 1100 volts grade in armored, heavy duty electric power cables with stranded aluminium conductor, 1100 volts grade, cross-sectional area of size 70 sq mm 3.5 Core complete all as specified and directed.

Taking down any type any breaking capacity MCCB complete all as specified and as directed as Engineer-in-charge.

S&F Cable jointing kit for 1100V (Earthed) grade cable for straight through joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 50 to 95 sqmm complete all as specified and directed

M&L for cutting existing road/hard standing not exc 50x60 cm in wide & depth getting out excavated material for laying GI tube , for passing through LT cable, returning filling & well rammaing watering finish suraface 10 cm from top using PCC 1:3:6 including removal of surplus soil complete all as specified and directed

M & L for maintenance free chemical Gel based earthing, GI Pipe in Pipe type having 80 mm dia 3 mtr long GI pipe(Wall thickness of 3.2 mm) 50 Kg back fill compound all as required at site including testing on completion and taking down of old earthing all as directed by Engr in-Charge Note : (a) Earth resistance of earth pit should be less than 1.0 Ohms on testing after completion. If the desired earth resistance is not obtained the earthing will be redone at no extra cost.

M & L in repairs for Copper Strip of size 20 x3 mm and including taking out unserviceable Copper strip complete all as specified and directed by Engr - in - charge.

Demolation of Cement concrete in ground floor and paving n.exc 15 cm thickness (below or above) ground level including removal all as specified.

Supply and in repairs MCCB DB verticle type made of sheet steel , powder painted with nuetral bus bar 200 A, neutral link, IP-43-IK09 protection grade , 415Volts TPN with 4 way Double door , L&T CAT NO-DBVTH004DD/ / LEGRAND CAT NO-607913/ equivalent of ABB

Supply in repair MCCB DB verticle type made of sheet steel , powder painted with nuetral bus bar 200 A, neutral link, IP-43-IK09 protection grade , 415Volts TPN with 8 way Double door , L&T CAT NO-DBVTH004DD/ / LEGRAND CAT NO-607913/ equivalent of ABB

M&L for PCC (1:3:6) type B1 (using 20 mm graded stone aggregate as in sub base to floor 100 mm thick finished even and smooth without using extra cement complete all as specified and directed.

S & F ,in repair, MCCB 415 volts grade with adjustable short circuit and over load of following rating :- Make: L&T/Havells/Legrand

63 Amps, 25 KA, 3 Pole

100 Amps, 25 KA, 3 Pole

125 Amps, 25 KA, 3Pole

160 Amps, 36 KA, 3 Pole

200 Amps, 36KA, 3 Pole

250 Amps, 36 KA, 3 Pole

400 Amps, 36 KA, 3 Pole

M&L for MS chequered plates Fe 410-W (Gde E- 250) Quality 'A' of not less than 6 mm thick of sizes as per site requirement incl cutting , welding of strip on the edges for proper fixing and provn of handles for lifting & fixing arrangement as shown & directed.incl taking out the old & unserviceble chequered plates all as directed.

Material and Labour for repairing of LT Panel of not exc of sizes 2.5 Mtr x 2 Mtr x 0.80 Mtr doors/shuttering to welding and bracing of hinges, tinkering, and replace worn out rusted unserviceable doors/compartment shutters front sides and back side lock system including replace worn out rubber gaskets/feeding of compartment doors/shutters, decorbonising of all cable terminals, Busbars (R,Y,B &N) aluminium/copper cleaning inside of panel housing with help of air belower heavy duty complete all as specified and directed by Engineer-in-Charge

Material and Labour for repairing of LT Panel of not exc of sizes 2 Mtr x 1.5 Mtr x 0.80 Mtr doors/shuttering to welding and bracing of hinges, tinkering, and replace worn out rusted unserviceable doors/compartment shutters front sides and back side lock system including replace worn out rubber gaskets/feeding of compartment doors/shutters, decorbonising of all cable terminals, Busbars (R,Y,B &N) aluminium/copper cleaning inside of panel housing with help of air belower heavy duty complete all as specified and directed by Engineer-in-Charge

Material and Labour for repairing of feeder pillar box of not exc of sizes 2 Mtr x 1.5 Mtr x 0.80 Mtr doors/shuttering to welding and bracing of hinges, tinkering, and replace worn out rusted unserviceable doors/compartment shutters front sides and back side lock system including replace worn out rubber gaskets/feeding of compartment doors/shutters, decorbonising of all cable terminals, Busbars (R,Y,B &N) aluminium/copper cleaning inside of panel housing with help of air belower heavy duty complete all as specified and directed by Engineer-in-Charge

S&F ,in repair, LED indication lamp for indication of (R,Y,B) 230 Volts including connections and taking out unserviceable indication Lamp complete all as specified and directed

S&F ,in repair, Volt meter 0-500 Volt digital type including connections and taking out unserviceable Volt meter complete all as specified and directed

S&F ,in repair,Ampere meter 0-400Amps digital type including connections and taking out unserviceable Ampere meter complete all as specified and directed

S&F ,in repair, of epoxy insulators suitable to fixing of earth conducors including all fixing accessories saddles. screws, Nut and bolts complete all as specified and directed by Engineer-in-Charge

M/s Bhagirathi Electricals

NANGIA AND CO

Safe Construction Co.