Construction of Road from Badampahad Petrol pump to Oskiunder MMSY-CMRL in the District of Mayurbhanj for the year 2025-26.

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials by manual means and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 but excluding the charges of GST etc. complete & as per direction of the Engineer-in-Charge.

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site by mechanical means within a lead of 5kms, spreading, grading to required slope and compacting to meet requirement of table 300-2 & Clause 305 of MOSRT&H specifications for Road & Bridges work (4th Revision).(With mechanical lead up to 1000m).

Excavation for road work in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m as per the direction of the Engineer-in-Charge.

Excavation in Hard Rock (blasting prohibited by mechanical means) as per technical specificaation clause 302. etc. complete as per the direction of the Engineer-in-Charge.

Excavation in soil in Hilly area by mechanical means including cutting & trimming of side slopes & disposing of excavated earth with a lift upto 1.5 m & lead upto 20 mtr as per technical specification clause-1603.1 etc. complete as per the direction of the Engineer-in-Charge.

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement as per MORD technical Specification Clause 301 and direction of the Engineer in Charge (excluding cost of excavation and transportation to site). etc. complete as per the direction of the Engineer-in-Charge.

Fine dressing and turfing including transportation by mechanical means with all leads and lifts and placing of turfs in position and ramming with thapies including watering and cost of labour and all materials but excluding the charges of GST etc. complete as per the direction of the Engineer-in-Charge.

Providing, laying, spreading and compacting graded stone aggregates to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant, carriag of mixed material by Tiper to site, laying in uniform layers with paver in sub base/base course on wel prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MoSRT&H specification for Road and Bridge works (4th Revision)

Providing and applying primer coat with bitumen emulsion (SS) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.6 kg/sqm using mechanical means as per Technical Specification Clause 502 & as per direction of EIC

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 & as per direction of EIC

Providing and laying semi dense bituminous concrete with hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder of 60/70 penetration grade of bitumen, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheelede, vibratory and tandem rollers to achieve the desired compaction as per Clause 508 of MoSRT&H Specifications for Road & Bridge works (4th Revision) AR-175/47

Supplying & filling good clean river sand of approved quality including watering to complete saturation & ramming complete with all leads & lifts including cost, conveyance, royalty & taxes of all materials & cost of all labour & T&P required for the work etc. complete as per specification & direction of Engineer in charge.

Construction of un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M-30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction, expansion and construction joints, applying sealant, admixtures as approved, curing of concrete slabs for 14-days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification as per direction of the Engineer-in-Charge.

$Construction of

Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.

Plain Cement Concrete M15 (1:2.5:5) nominal mix) in foundation as per drawings & Technical Specification Clause 802,803,1109,1202,1203 of MoRD

Plain Cement Concrete M15 (1:2.5:5) nominal mix) in Sub structure as per drawings & Technical Specification Clause 802,803,1109,1202,1203 of MoRD

敳戠⁹牰癯摩湩⁧汣獯⁥牧摡⁥牧湡汵牡猠扵戭獡⁥牧摡湩ⵧ䥉⁉慭整楲污愠⁳数⁲慴汢ⵥ〱ⴰⰱ猠牰慥楤杮椠湵晩牯慬敹獲眠瑩⁨潭潴⁲牧摡牥漠牰灥牡摥猠牵慦散‬業楸杮戠⁹業⁸湩瀠慬散洠瑥潨⁤楷桴爠瑯癡瑡牯愠⁴䵏ⱃ愠摮挠浯慰瑣湩⁧楷桴瘠扩慲潴祲爠汯敬⁲潴愠档敩敶琠敨搠獥物摥搠湥楳祴挠浯汰瑥⁥獡瀠牥挠慬獵⁥〴‱景䴠协呒䠦匠数楣楦慣楴湯⁳潦⁲潒摡☠䈠楲杤獥眠牯㐨桴删癥獩潩⥮愠⁳数⁲楤敲瑣潩景䔠杮湩敥⵲湩䌭慨杲⹥†††††††††††††††††††††††††††††††††††⠠慍整楲污眠瑩⁨潭牯浵☠猠湡⁤摡業瑸牵⥥ㄠᜀ대᠁甀ࠁ畓灰祬湩⁧湡⁤楦楸杮漠⁦〸洠桴捩散敭瑮挠湯牣瑥⁥湩整汲捯楫杮瀠癡牥戠潬正漠⁦ⵍ〴朠慲敤漠⁦灡牰癯摥洠歡ⱥ搠獥杩Ɱ挠汯畯⁲湡⁤楳敺洠摡⁥祢䈠潬正洠歡湩⁧慭档湩⁥楷桴瀠潲数⁲潣灭捡楴湯氠楡⁤湩爠煥極敲⁤慰瑴牥攠捴‮潣灭敬整椠污敲灳捥⁴潣普牯業杮琠剉⁃偓ⴠ㘠㨳〲㠱‮瑥⹣挠浯汰瑥⁥獡瀠牥搠物捥楴湯漠⁦湅楧敮牥䤭⵮桃敩⹦⠠潓⁒㈭㈰′敎⁷楍捳汥慬敮畯⁳瑉浥⁳慐敧丠⹯㈠㌲䴩ᜀ愀᠁꼀ࠀ汐楡敃敭瑮䌠湯牣瑥⁥㉍‰潮業慮業⥸椠敬敶汬湩⁧潣牵敳戠汥睯漠数潦湵慤楴湯漠⁦效摡眠污獬愠⁳数⁲牤睡湩獧☠吠捥湨捩污匠数楣楦慣楴湯䌠慬獵⁥〸ⰲ〸ⰳㄱ㤰ㄬ〲ⰲ㈱㌰漠⁦潍䑒 ἀ─Ḁ⬀〸洰⁸〶洰楤⁡敲瑣湡畧慬⡲匠数摥䰠浩瑩਩ࠃ
牐癯摩湩⁧湡⁤牥捥楴杮搠物捥楴湯愠摮瀠慬散椠敤瑮晩捩瑡潩景猠浥⁩敲汦捥楴敶猠杩潢牡獤愠⁳数⁲䤠䍒㘭‷慭敤漠⁦′浭琠楨正䴠匮‮桓敥⁴畤祬猠潴敶攠慮敭敬⁤慰湩⁴桷瑩⁥潣潬牵椠牦湯⁴湡⁤牧祥挠汯畯⁲湯戠捡楷桴爠晥敬瑣癩⁥潢摲牥漠⁦〷洠楷瑤⁨湡⁤敲畱物摥洠獥慳敧‬敬瑴牥ⱳ映杩牵獥眠瑩⁨敲汦捥楴敶琠灡⁥景攠杮湩敥楲杮朠慲敤愠⁳数⁲位䑒猠数楣楦慣楴湯⁳景爠煥極敲⁤桳摡⁥湡⁤潣潬牵‮匠灵潰瑲摥愠摮眠汥敤⁤湯琠潷渠獯‮㜴洠⁸㜴洠景ㄠ′坓⁇煳慵敲琠扵⁥景㌠㔰‰浭栠楥桧⁴畤祬猠牴湥瑧敨敮⁤祢㈠‵浭砠㔠洠卍映慬⁴物湯漠摥敧⁳湯戠捡楦浲祬映硩摥琠桴⁥牧畯摮戠⁹敭湡⁳景瀠潲数汲⁹敤楳湧摥映畯摮瑡潩獮眠瑩⁨ⵍ㔱朠慲敤挠浥湥⁴潣据敲整㐠〵洠⁸㔴‰浭砠㘠〰洠Ɑ㘠〰洠敢潬⁷牧畯摮氠癥汥愠⁳数⁲灡牰癯摥搠慲楷杮愠摮吠捥湨捩污匠数楣楦慣楴湯䌠慬獵⁥㜱㄰愠摮愠⁳数⁲楤敲瑣潩景䔠䍉OѷĈ倀潲楶楤杮愠摮攠敲瑣湩⁧楤敲瑣潩湡⁤汰捡⁥摩湥楴楦慣楴湯爠瑥潲爭晥敬瑣牯獩摥猠杩獡瀠牥䤠䍒㘭ⴷ〲㈱洠摡⁥景䌠慬獳䈭爠瑥潲爭晥敬瑣癩⁥桳敥楴杮漠⁦楨桧椠瑮湥楳祴愠摮栠杩⁨湩整獮瑩⁹牰獩慭楴⁣牧摡⁥桳敥楴杮愠⁳数⁲十䵔䐠㐠㔹ⴶ㤰吠灹ⵥ䥉⁉湡⁤噉猠牴捩汴⁹潣普牯業杮琠汃畡敳㘠㜮漠⁦剉⁃㜶㈭㄰′湡⁤楶敤挠慬獵⁥〸⸱ⰳ映硩摥漠敶⁲污浵湩畩桳敥楴杮‬⸲〰洠桴捩獡瀠牥䌠慬獵⁥⸶⸵′景䤠䍒㨠㘠ⴷ〲㈱漠⁲⹁⹃⹐⠠汁浵湩畩潣灭獯瑩⁥慰敮⥬甠敳⁤潦⁲楳湧戠慯摲⁳楷桴愠琠敨浲灯慬瑳捩挠牯⁥景氠睯搠湥楳祴瀠汯敹桴汹湥⁥䰨偄⥅戠瑥敷湥琠潷琠楨正猠敨瑥⁳景愠畬業楮浵眠瑩⁨癯牥愠汬琠楨正敮獳漠⁦洴湡⁤污浵湩浵琠楨正敮獳漠⁦⸰洵湯戠瑯⁨楳敤⁳畳灰牯整⁤湯洠汩⁤瑳敥湡汧⁥潰瑳㜠洵⁸㔷浭砠㘠浭‬′潮⁳湡⁤″潮⁳潨楲潺瑮污愠摮ㄠ渠敶瑲捩污攠瑸慲猠灵潰瑲湩⁧敭扭牥漠⁦⹍⹓湡汧⁥景猠穩⁥〵浭砠㔠洰⁸洶映物汭⁹楦數⁤潴琠敨朠潲湵⁤祢洠慥獮漠⁦牰灯牥祬搠獥杩敮⁤潦湵慤楴湯眠瑩⁨ⵍ㔱朠慲敤挠浥湥⁴潣据敲整㐠‵浣砠㐠‵浣砠㔷挠Ɑ㘠‰浣戠汥睯牧畯摮氠癥汥愠⁳数⁲灡牰癯摥搠慲楷杮椠据畬楤杮挠獯ⱴ挠湯敶慹据ⱥ爠祯污瑩ⱹ琠硡獥漠⁦污慭整楲污ⱳ氠扡畯Ⱳ吠☠倠‬硥慣慶楴湯‬畣楲杮†瑥⹣挠浯汰瑥ⱥ甠摮牥猠灵牥楶楳湯漠⁦湅楧敮牥椭⵮桃牡敧⠮㠱〰浭ㅸ〲洰敒瑣湡汧⥥UË圀楨整眠獡楨杮琠潷挠慯獴漠慰慲数⁴慷汬⁳湡⁤牴敥琠畲歮⁳湩汣摵湩⁧牰灥牡瑡潩景猠牵慦散戠⁹汣慥楮杮猠牣灡湩⁧瑥⹣愠⁳数⁲整档楮慣灳捥晩捩瑡潩獮䌠慬獵⁥㤱㔱†獡瀠牥搠物捥楴湯漠⁦桴⁥湅楧敮牥椠档牡敧2匀灵汰楹杮‬潃癮祥湩⁧湡⁤楦楸杮猠汰⹳䤠据畬楤杮攠ա瑩浥老慍湩整慮据⁥景爠慯⁤楳湧⁳祢眠祡漠⁦汣慥楮杮愠摮爠灥楡瑮湩⁧景洠湡慤潴祲⼠爠煥汵瑡牯⁹ 慣瑵潩慮祲⼠椠普牯慭潴祲愠摮瀠慬散椠敤瑮晩捩瑡潩獮猠杩潢牡⁤獡瀠牥牤睡湩獧愠摮琠捥湨捩污猠数楣楦慣楴湯䌠慬獵⁥㤱〱†獡瀠牥搠物捥楴湯漠⁦桴⁥湅楧敮牥椠档牡敧딮敒慰物漠⁦䍒⁃慲汩湩⁧潴戠楲杮椠⁴潴琠敨漠楲楧慮桳灡ⱥ挠敬湡湩⁧湡⁤敲慰湩楴杮愠⁳数⁲牤睡湩獧愠摮琠捥湨捩污猠数楣楦慣楴湯䌠慬獵⁥㤱ㄱ†獡瀠牥搠物捥楴湯漠⁦桴⁥湅楧敮牥椠档牡敧

Foundation

Sub Structure

Super structure

Providing and laying cement concrete wearing course M30 grade including reinforcement complete as per drawing and technical specifications Clauses 800 and 1206.3.

Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000 mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 & direction of Engineer in charge.

Supplying, fitting and placing HYSD bar reinforcement (Fe 415) complete as per drawings and MORD technical specification Clauses 1000,1200 as per direction of the Engineer in charge

1000 mm dia HPC

Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and MORD technical specification Clauses 614, 709, 1204 and as per direction of the Engineer in charge

600mm equilateral triangle

Providing and fixing of typical MMSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing .

Providing and fixing of typical MMSY Citizen sign board with logo as per MORD specifications and drawing. Two MS plates of 2mm thick, top & middle plate duly welded with MS flat iron 25mmx5mm size on back on edges. The flat iron frame of both plate will be welded to 2nos 75mmx75mm of 12SWG sheet tubes posts duly embeded in C.C. M-15 grade blocks of 600mmx600mmx750mm, 750mm below ground level. The top most dimond plate will be welded to middle plate by 47mmx47mm of 12SWG steel tube. All M.S. will be stove enameled on both sides. Lettering & printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quailty in required shade & colour. All sections of framed posts & steel tubes will be painted with primer & two coats of paint as per drawing clause 1701 and Annexure 1700.1

providing and fixing Guard post with 150 mm dia R.C.C made with R.C C of M15 including cost, conveyance etc complete as per direction of E.i.C

Ordinary kilometer stone

200 mm Stone

1st Year

2nd Year

3rd Year

4th Year

5th Year

1st Year

2nd Year

3rd Year

4th Year

5th Year

1st Year

2nd Year

3rd Year

4th Year

5th Year

1st Year

2nd Year

3rd Year

4th Year

5th Year

1st Year

2nd Year

3rd Year

4th Year

5th Year

1st Year

2nd Year

3rd Year

4th Year

5th Year

1st Year

2nd Year

3rd Year

4th Year

5th Year

1st Year

2nd Year

3rd Year

4th Year

5th Year

1st Year

2nd Year

3rd Year

4th Year

5th Year

1st Year

2nd Year

3rd Year

4th Year

5th Year

1st Year

2nd Year

3rd Year

4th Year

5th Year