Special Renovation work at Thaikkal welness centre and supplying of paver block Thaikkal welness centre at Thaikkal 1st street in ward - 50

Supplying and filling in foundation and basement with filling Quarry Dust in layers of not more than 15cm.thick well rammed watered and compacted etc., complete complying with standard specification.

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat , including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc,complete as per standard specification. - 10 sq.m

Supply and fixng of TNEB meter board suitable for 3 phase 200A service connection made up of suitable angle iron frame work of size 3 feet x 2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 3 feet x 2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 200A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 19/16 PVC insulated copper wire with earth connection complete SD 131

Supply and fixing of Horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure with 40 A 4 pole MCB isolater as incoming and 12 Nos. 6A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI mark (lik standard make) SD. 179

Construction of Borewell chambers of following sizes with earth work excavation for foundation with Dust Filling 10mmthick and Plaince ment concrete bed in C.M.1:5:10 using4 0mm HBG jelly10mm thick for foundation, 23cm thick brick wall work in C.M.1:5 for chambers,Inner and Outer Plastering with C.M.1:312mmthick,benching,channelling,75mm thick RCC loose slab covering in C.M.1:2:4mix using 20mm blue granite jelly including necessary reinforcement,etc., complete

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete PWD SOR Pg. No. 63 Sl.No. 239

Dadooing Supplying and laying in flooring with fully polished Sinthetic Grey colour Granite stone of 10mm thick (average) of 2' X 1' in size laid in cement mortar 1:2 - 20 mm thick & pointed with same colour of cement etc., complete as per standard specification

UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on

Letter writing for Name Boards on Wall Surface Rates including of Paints and Labour Charges etc., complete

Supply and Delivery Fabrication of MS Doors with outer frame and shutter frame in MS angle or size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete. for door 1.00 x 2.10

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 80mm thick high strength type conforming IS 15658-2007 of rubberized interlocking paver lock in size of minimum compressive strength of 40N mm2 in uniform shape of approved make to be laid in flurring bone pattern with quarry rubbish cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base quarry rubbish cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers, sweeping transporting loading unloading of laying paver block as per standard specification.

ADD GST 18%