PROVN OF TOILET, PATHWAY, ALL WEATHER PROOF SHED NEAR BLDG. NO P-177, PATH LONGWITH MANSSON SHED NEAR SHEKHON BLOCK (P-166), IRON LADDER IN P-205 (AMARPALI), LAYOUT OF ACETYLENE AND OZYGEN CYLINDERS, IRON GRILL GATE AT CDCC/CCTV ROOM, WASH BASIN (QTY

Amount

Excavation in trenches n . exc 1.5 m wide and n. exc 1.5 m in depth; for foundation etc. or for shaft, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n exc 1.5 m in depth and getting out any type of soil deep and getting out in hard/dense soil.

Surface excavation n. exc 30cm deep and getting out in soft soil.

Returning filling including spreading, leveling, watering and well ramming in layers n exc. 25 cm complete all as specified and as directed.

Removing excavated material exc 250 Mtr but not exc 500mtr and depositing, where directed at a level n.exc 1.5 Mtr above the starting point complete all as specified and as directed.

Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering

M&L for PCC 1:4:8 type D-2 using 40mm stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L brick work with fly ash bricks (FASB) conferming to IS 12894, of strength M-10 straight or curved on plan exc 6m mean radious built cement mortar 1:4 complete (on parapet wall) all as specified and as directed.

M&L re-inforced Cement Concrete, type M-25, (using 20mm graded granite stone aggregate) as in Beams, cantilevers, lintels over 1.5M span.

M&L re-inforced Cement Concrete, type M-25, (using 20mm graded granite stone aggregate) as in slabs suspended, on walls, beams and columns, in floors, roofs, landings and in shelves and the like.

M&L re-inforced Cement Concrete, type M-25, (using 20mm graded granite stone aggregate) as in chajjas

Use & waste of form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports etc. Fair finished, flat.

Formwork to chullah hods, chajjas, troughs and similar items including edges

M&L reinforcement 10mm and over using TMT bars cut to length bent to shape as required including cranking bending spirally for hooking ends and binding with and including mild steel wire (annealed not less than 0.9mm dia or securig with clips etc complete.

M&L reinforcement 6mm to 8mm TMT bars cut to length bent to shape as required including cranking bending spirally for hooking ends and binding with and including mild steel wire (annealed not less than 0.9mm dia or securig with clips etc complete.

M&L reinforcement 5mm to 10mm TMT bars in stirrups cut to length bent to shape as required including cranking bending spirally for hooking ends and binding with and including mild steel wire (annealed not less than 0.9mm dia or securig with clips etc complete.

M&L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L for 75mm thick cement concrete 1:4:8 type D2 (using 40mm graded crushed stone aggregate) as in sub base of floor complete all as specified and as directed.

M&L for coloured non skid joint free ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor, over and including 15mm thick screed bed or bedding layer in cementy mortar 1:4,etc complete.

M&L for glazed coloured ceramic tiles 300 x 600 x 10 mm thick for work on vertical surface such as skirting, dado, set & jointed in cement slurry and pointed in white or coloured cement to match the existing wall surfaces, over and incl 10mm thick rendering in cement mortar 1:4 etc complete.

M&L renderig 15mm thick in cement mortar 1:6 over fair faces of of brick or concrete surface of wall rendering is to be finished even and smooth without using extra cement.

M&L renderig 15mm thick in cement mortar 1:4 over other than fair faces of brick/stone masonry surface of wall rendering is to be finished even and smooth without using extra cement.

M&L renderig 5mm thick in cement mortar 1:3 on ceiling surface and finished even and smooth with out using extra cment

M & L for preparation of new plastered surface and applying two coat of oil bound distemper on walls over 1mm thick wall care putty complete all as specified and as directed.

Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including prepration of new wall surfaces.

M & L for preparation of new plastered surface and applying three coat of white wash on ceiling complete all as specified and as directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone including cutting and polishing types over 15 mm thick in CM(1:6) etc complete.

S&F Sheet glass 4.8 mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane

S&F aluminium anodised barrel tower bolts of extruded section and fixed fixed 200 mm long etc complete.

S&F aluminum handles cast type anodized 150 mm size etc complete.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy.

M&L two coat synthetic enamel paint over one coat of red oxide primer on new steel surface of any description not otherwise described over 10 cm width or girth etc complete.

M&L for 75mm thick cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in plinth protection /path finished even and smooth without using extra cement complete all as specified and directed.

M&L for cement concrete type B-1 ,1:2:4 (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L for plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in padding over roof finished and laid to required slope complete all as specified and as directed.

M&L 10 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete is stil green finished even and fair including mixing of water proofing compound as per manufacturer instruction etc complete all as specified and as directed. Note :- Water proofing compound shall be measured separately as supply only

Supply only integral water proofing compound complete all as specified and as directed.

M&L One coat of bituminous based primer conforming to IS-3384-1965 @ 0.3 Kg/Sqm to be applied on prepared surface, till the surface is properly impregnated.

M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application with solar reflective bituminous aluminium paint @ 0.10 kg/sqm complete all as specified.

Supplying and laying of 16mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings and fixed to wall, ceiling or laid in floor. Note :- Rate inclusive of chase cutting in stone/brick masonry of concealed tubing.

Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings and fixed to wall, ceiling or laid in floor. Note :- Rate inclusive of chase cutting in stone/brick masonry of concealed tubing.

S & F 1000 litre capacity of rotational moulded polyethylene water storage tank multilayered construction, ISI marked of make specified (cylindrical vertical with closed top) hoisted and fixed in position including S & F 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings complete all as specified in SSR Part-I complete all as specified and as directed.

S & F 20mm dia CPVC gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. .(Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm etc complete.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls.

S&F PVC (SWR) bends of radius 110.

S&F 75mm bore CI floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) .

S&F 100x150mm, P/S type Salt-glazed stoneware gully traps, square or round mouthed, tvpe 'P'

S & F Vitreous China Ware Wash hand basin white, oval shape, glossy finish, under counter size 580 x 410 mm size (Oval shape) fixed to granite slab jointed in cement slurry including waste pipe complete all as specified and directed.

S&F PVC connection 15mm dia with Brass nuts of length 450mm etc complete.

S&F 15 mm bore angle stop cock long thread fancy type chromium plated cast copper alloy, screwed down high pressure with crutch or butter fly handle screwed both and for iron pipe or for union and fixed etc complete.

S&F 15 mm bore bib taps long body chromium plated fancy type, cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe or for unions and fixed 15 mm bore etc complete.

S & F 15mm bore swan neck pillar taps, Cast Copper alloy, with capstan heads, chromium plated, fency type screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe.

S&F brass chromium plated tubeler towel rail D type 600mm long fixed with and dincluding cromium plated brass screws and wooden/plastic cleats complete as specified.

S&F Soap dish any type , fixed to plugs with chromium plated brass screwes.

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Sliding Powder Anodised aluminium window and ventilator shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as completed

S & F 40 mm thick Flush shutters, solid core construction, with particle board core and if both faces are covered with decorative face veneer with lipping/frame to match

M&L 2nd class HW plain solid straight chowkhats and frames worught framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete

M&L 2 coat of synthetic enamel painting to wood and wood based material surfaces exc 10cm width or girth over a one coat of pink primer incl preparation.

M & L for prepariation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer.

S&F in repairs vitreous china squatting pan 'ORISSA PATTERN ' size 580mm x 440mm 'white with integral foot rest (excluding flushing cistern and flush pipe ) with 'P' or 'S' trap, front or back inlet including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed

S&F 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed

Supply and fix as in replacement hand shower (health faucet) (ABS Chrome palted) with 8mm dia, 1m long, flexible tube with wall hook complete all as specified and as directed by Engineer-in-Charge .

Cutting openings, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m

Surface dressing n.exc 15 cm in soft and loose soil

Removing exacavated material exc 250m but n.exc 500m and deposting where directed

Excavation in trenches, not exceeding 1.5M wide and not exceeding 1.5M depth for foundation etc and getting out in Hard/ dense soil all as specified of 150mm bore.

M&L for PCC 1:3:6 (type C-2) using 40mm graded stone aggregate for bed to drain pipe of dia 150 mm including packing under and hauching against the side of pipes

M & L 150mm dia Reinforced concrete pipes, class NP-2, laid and jointed complete with collars laid on150 mm thick PCC 1:4:8 bed all as specified.

M&L for PCC 1:3:6 (type C-2) using 40mm graded stone aggregate as in foundations, filing and mass concrete.

M&L Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6.

M&L for rendering 15 mm thick in cement mortar 1:4 mixed with water proofing compound on fair surfaces of stone masonry work or concrete surfaces and finished even and smooth with using WPC (Note : WPC shall be measured & paid separately).

M&L for PCC 1:2:4 (type B1) using 20mm graded stone aggregate as in coping ,benching for man hole including necessary form work and finishing all exposed surfaces of concrete even and smooth using extra cement all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including form/moulds, mitred/stop end etc complete all as specified & directed.

M&L for precast RCC 1:2:4 (type B1) using 20mm graded stone aggregate as in cover slab for manholes etc set in CM (1:4) and finishing all exposed surfaces of concrete even & fair without using extra cement all as specified.

S&F TMT bars 10mm and over dia cut to length bent to shape required including bending, hooking, binding with and including MS witre not less than 0.9mm dia.

Removal of excavated material exc 50mtrs and depositing where directed at a level of n.exc 1.5mtrs above the starting point in soil.

Excavation over areas not exceeding 1.5M depth and getting out in Hard/ dense soil all as specified.

Excavation over areas exceeding 1.5M depth and getting out in Hard/ dense soil all as specified.

M&L plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete.

M&L renderig 15mm thick in cement mortar 1:6 over other than fair faces of brickwork of wall rendering is to be finished even and smooth without using extra cement.

M&L reinforced cement concrete 1:2:4 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.

Use & waste of form work to soffits of suspended slabs such as roof slabs, floor slabs and similar work not exc 200mm thick, fair finished , flat.

Removal of excavated material exc 250mtrs but n.exc 500mtrs and depositing where directed at a level of n.exc 1.5mtrs above the starting point in soil.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed uard bars; barred iron doors; ladders; ramed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

M&L 100 mm dia, Cast iron soil, sand cast waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors all as specified.

S&F cast iron cowls 100mm dia

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in Hard dence soil complete all as specified and directed.

Removing excavated material (soils) nexc 250m and depositing where directed at a level not exc 1.50m above the starting point all as specified & directed.

M&L 150mm thick soling (or sub base) with broker boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber

M&L for 75 mm thick PCC 1:4:8 type D2 as in sub base over sub base surface.

M&L for machine pressed precast concrete interlocking paver block with Grey cement and pigment any shape and size confirming IS 15658-2006 OF 60 MM thickness M-35 Grade.

M&L 50mm thick sand cushing for placing Interlocking Paver block etc complete.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe-290 Gde E-165

M&L Preparation of new steel surface and applying two Coats of synthetic enamel paint over a coat of red oxide zinc chrome primer

M&L for plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in copping or roof kerbs on roof chamfered on edge including troweling slightly complete all as specified and as directed.

S&F MS plates (plain or chequered ) channels, square cut or notched (ordinary and counter sunk) forming holes ,without any attachment, Fe-410W (Gde-E-250) quality -B

S&F painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof ridge covering fixed with self tapping screws as specified.

Surface excavation in soft/loose soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out

Removing excavated material (soil) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

M&L 50mm thick sand cushing for placing Interlocking Paver block etc complete.

M & L for machine pressed coloured rubber moulded precast concrete interlocking paver block with pigment any shape and size confirming to IS-15658-2006 of 80 mm thickness, M-35 grade all as specified and directed by Engineer-in-Charge.

M&L for 75mm thick cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in foundation filling and mass concrete as sub base of floor complete all as specified and as directed

M & L hardcore of gauge n exc. 63 mm broken stone depsited, spread and levelled in layers n exc. 15cm thick all as specified.

Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil.

Removing excavated materials (soils) exceeding 250Mtr but not exceeding 500Mtr and depositing where directed.

Rolling and consolidating formation surfaces in cutting using power roller of capacity exc 8 tonne and n.exc 12 tonnes to achieve field compaction of at least 98% of modified proctor density of existing soil as directed.

M & L Hard core of guage not exc 63 mm of broken granite stone deposited spreaded and levelled in layers not exc 15 cm thick watered and rammed to a true surface.

M & L for 100 mm thick sub base in PCC 1:4:8 type D-2 (using 40 mm graded stone aggregates) all as specified.

M & L for sand filling under floors or in foundations including watering and consolidation as in levelling coarse for fixing of interlocking tiles all as specified and directed by Engineer-in-Charge.

M & L for machine pressed coloured rubber moulded precast concrete interlocking paver block with pigment any shape and size confirming to IS-15658-2006 of 60 mm thickness, M-35 grade all as specified and directed by Engineer-in-Charge.

Excavating in post holes (or similar holes) in soft/loose soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface

M&L plain cement concrete 1:2:4 type B2 using 40mm graded stone aggregate as in foundation filling and mass concrete as sub base of floor complete all as specified and as directed.

S&F pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick including rideg of an colour having tensile strength of 550 Mpa as in roof covering to wall fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S & F rolled mild steel angle/tubular/square/rectangular roof trusses (framed), trussed purlins, rails and fastenings and heavy bracket framing, confirming to Fe 410 - W including distance pieces, cleats, etc., complete.

M&L Preparation of new steel surface of any description, over 10cm in width or girth,not otherwise described and applying two Coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engr-in-Charge

M&L for Chequered cement concrete tiles 25cm x 25cm x 25mm thick, set, jointed and pointed in near cement slurry in floors with grey cement and pigment over 15 mm thick screed bed in CM 1:6

Excavating post holes (or similer holes) each n exc 0.5 cum getting out soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not excceeding 25cm.

M&L PCC 1:3:6 type C-1 (using 20mm graded crushed stone granite aggregate) as in foundation filling and mass concrete.

Materials & labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of primer complete.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm.

M&L for 100mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in foundation filling and mass concrete as sub base of floor complete all as specified and as directed

M&L for 25mm thick cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in floor complete all as specified and as directed

S&F Framed work such as grills, gratings, gate etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M & L for preparation of new plastered surface and applying two coat of cement base paint over a coat of alkali resistant priming paint on external surface etc complete all as specified and as directed.

S&F 15 mm bore galvanised mild steel tubing of medium grade with all fittings & fixed complete to walls & ceiling or laid in trenches/floors etc complete.

S & F 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S & F Vitreous China Ware Wash hand basin white, oval shape, glossy finish, under counter size 580 x 410 mm size (Oval shape) fixed to granite slab jointed in cement slurry including waste pipe complete all as specified and directed.

S&F PVC connection 15mm dia with Brass nuts of length 450mm etc complete.

S&F 15 mm bore angle stop cock long thread fancy type chromium plated cast copper alloy, screwed down high pressure with crutch or butter fly handle screwed both and for iron pipe or for union and fixed etc complete.

S & F 15mm bore swan neck pillar taps, Cast Copper alloy, with capstan heads, chromium plated, fency type screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe.

S&F 32mm dia UPVC Low density polyethylene (LDPE) waste pipes of pressure rating 6 kgf/sq. cm

M & L glazed coloured (digital/printed/design) ceramic tiles in vertical surface 450 mm x 300 mm x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including 10 mm thick bedding layer in CM 1:4 complete all as specified and directed

Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 all as specified and as directed.

M&L for rendering 10mm thick in CM 1:6 backing coat and 5mm thick in CM 1:4 mixed with water proofing compound as finished coat on stone wall surface to be finished even and smooth without using extra cement as specified.

M & L for rendering 15 mm thick on stone masonry surfaces or surface other than fair face of brick-work surfaces of walls in cement mortar 1:6 finished even and fair without using extra cement.

M&L for 1mm thick JK/Birla wall care putty including preparation of surface complete all as specified and as directed.

M&L for preparation of newly plaster surface and applying two coats of distemper oil emulsion on surfaces of walls.

M&L for preparation of newly plaster surface and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces as specified.

Supply only liquid water proofing compound

S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as completed

M&L two coat synthetic enamel paint over one coat of red oxide primer on new steel surface of any description not otherwise described over 10 cm width or girth etc complete

Supply, installation, testing and commissioning of Automatic Pressure Booster Pump for Bathrooms (1 HP) With 24L Tank, Hydro-Pneumatic Low power consumption, motor features Direction of rotating Anti-clockwise when viewed from driving end Dynamically balanced rotor,Motor body High-quality Extruded aluminium body Motor speed 2900 Revolution per minute Motor stator CRC Prossed grade stampings Pipe size25 mm x 25 mm (2.5 cm x 2.5 cm) Copper winding POWER DETAILS Power : 1 HP Rated frequency : 50 Hz Rated power input : 0.75 kW Voltage operating range :180 V to 260 V Cast iron Pump casing Noryl Impeller ShaftSS 410 & Danfoss switch for Pressure adjustment Automatic ON & OFF, fitted with T.O.P(Thermal Overload Protection) for Protection against Overload, Make : Havells or equivalent ,including connection of PVC pipe and fittings(size 20 to 40mm as per site requirement) from tank to pump and bathroom as per requirement , Suitable for residential pressure boosting applications like Faucets, Showers & Washing machines etc.Complete all as specified and directed by Engineer-in-Charge.

Supply and lay 20 mm bore galvanised steel water tubing medium grade including all fittings such as bends, elbows, tees, reducers, sockets, union etc and laid in trenches complete all as specified and drected.Make-Swastic,Jinadal or equivalent.

S &F gun metal gate valve with iron wheel head, screwed both ends for GI pipe 20 mm bore, all as specified and directed by Engineer-in-Charge.

Point wiring with PVC insulated and unsheathed multistranded FRLSH copper conductor single core 1.5 sqmm (nominal area) cable using approved colour code as per IS drawing in and incl heavy duty PVC concealed conduit wiring. not less than 25 mm which shall be increased as per site requirement with all accessories suitable for modular type fitment including provision for fixing of modular flush boxes of suitable size complete alongwith copper earth wire PVC insulated & unsheathed multistranded (FRLSH) copper conductor cable of size 1.5 mm as continuous earth wire connected to common earth dolly complete all specified and marking good disturbed surfaces of wall, floor or ceiling with plaster and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete and as directed Engr-in-Charge. (a) One light point/Fan point controlled by one switch.

(b) One 3 pin socket outlet 5Amps on the same board with other swithches.

M &L for ceiling rose 2to 3 terminal PVC/polycarbonate, isolated body type suitable for AC 230 volts complete all as specified.

M & L for module cover plate with frame as per site requirements for following module complete all as specified and as directed. (b) 3 module

M & L for module cover plate with frame as per site requirements for following module complete all as specified and as directed. (c) 6 module

M &L for modular metal flush box as per site requirement complete all as specified and as directed. (b) 3 module

(c) 6 module

M & L for modular switch 1 way 6 Amp 1 module complete all as specified and as directed

M & L for modular socket 6A 2/3 pin universal 2 modular, complete all as specified and as directed.

S & F energy efficient 20 watt (4.0 feet) LED integrated batten type luminaries mirror type suitable for watt or ceiling mounting with built in LED chip & integral LED driver 20 watt. Aluminum channel housing & polycarbonates diffuser of length 600 mm (approx) Color temperature 6500 k or as directed efficiency range 200-270V surge protection of 2 KV estimated life span of 50,000 hrs with all accessories, complete with fixing arrangement fitting shall be internally prewired and confirming to LM 79 & 80 standard, making all connection using 1.5 sqmm copper conductor multistandard PVC insulated 3 core flexible cable from ceiling rose to fitting drawn through PVC flexible conduit complete fixed in position & connection complete all as specified and directed by Engr-in-Charge (Note (i) LED fitting shall be provided for 3 years warranty (ii) Location for installation of LED fitting shall be as per approved drawing)

S & F energy efficient 10 watt (2.0 feet) LED integrated batten type luminaries mirror type suitable for watt or ceiling mounting with built in LED chip & integral LED driver 10 watt. Aluminum channel housing & polycarbonates diffuser of length 600 mm (approx) Color temperature 6500 k or as directed efficiency range 200-270V surge protection of 2 KV estimated life span of 50,000 hrs with all accessories, complete with fixing arrangement fitting shall be internally prewired and confirming to LM 79 & 80 standard, making all connection using 1.5 sqmm copper conductor multistandard PVC insulated 3 core flexible cable from ceiling rose to fitting drawn through PVC flexible conduit complete fixed in position & connection complete all as specified and directed by Engr-in-Charge (Note (i) LED fitting shall be provided for 3 years warranty (ii) Location for installation of LED fitting shall be as per approved drawing)

Supply and fixing LED Bulk head type high out put, 10 watt, 220 V AC, color temperature 6500 k or as directed, efficiency not less than 100 lumen/watt or total lumen output not less than 1000/10 watt ,estimated life span of 50,000 hrs with all accessories , complete with fixing arrangement fitting shall be internally prewired and conforming to LM 79 & LM 80 standard, IP 65 protection dust and water resistant, surge protection up to 2.5 KV, PC opal high efficiency diffuser, die cast aluminum housing with complete assembly , suitable for surface/wall mounted with driver holder including connecting up using 1.5 sqmm copper conductor multistandard PVC insulated with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix distribution board (DB), double (CRCA sheet ) dust and vermin proof SPN 4 way with appropriate Amps rated copper busbar, neutral bar, internal earth bar and cable tiles for cable management reversible door for iP 43 & IP 54, IK 09 impact resistance, single pole and neutral 250 volts ,flush to watt including chases cutting in wall for fixing good distributed wall surfaces to match with existing specification complete all as specified all as directed Note – Rates are inclusive for flush (concealed) mounting of DB SPN)

Supply and fixing 240V, 10 KA ‘C’ curve miniature circuit breaker (MCB) single pols of current carrying capacity 6 to 32 AMP, in the MCB DB complete with connection testing and commissioning all as specified and directed.

Supply and fixing 240V, 10KA ‘C’ curve miniature circuit breaker (MCB) single pole and nutral of current carrying capacity 32 Amps, in the MCB DB complete with connection testing and commissioning all as specified and directed.

S&F or exhaust fan 300 mm sweep, heavy duty motor with double ball bearing ,metallic body with laid guard to protect the dan to running AC, single phase 230 volts, including connection with 1.5 sqmm multi standard copper conductor flexible wire from ceiling rose, complete with blades/frame and outside louvers with necessary fixing arrangement and making good to disturbed surface complete all as specified and directed.

M & L for Earthling compete with GI earth electrode plate of Size 600x600x6mm thick, buried directely to ground/earth pit not less than 2.25m deep below normal ground level, connected to GI wire 4 mm dia as earth lead up to test point with suitable GI nut/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 reinforced with expanded metal weight not less than 4 kg/sqm and frame of angle iron 25x25x6mm with lugs 02 nos with 5 mm dia MS bar handle made to shape excavation and earth work in any type of soil and including light grade GI watering pipe 20mm bore with funnel and wire mesh and light grade of earth wire protection pipe 15mm bore up to main board complete as shown in electrical plate no 3 of MES schedule Part-I ,connected to earthling testing point and testing on completion complete all as specified and directed by Engr-in-Charge.

Supply and lay in trenches/floor/on wall/ on surface with necessary fixing accesseries LT XLPE insulated screened PVC beded galvanised steel strip or wire armoured electric power cable (heavy duty)1100 volts grade with stranded aluminium conductor of size 16 Sqmm 2 Core including necessary connection with provision of lugs & cable gland fixing arrangements all as specified and directed.

M&L & fixing of DWC pipes it should be flexible & should allow deformation in diameter as well as In joints under external load & soil natural movement, socket & spigot joint with electrometric sealing ring , it should be highly corrosive resistant & it should be impact resistant, chemiacal resistant, flexible & light weight of size 50 mm dia complete with coupler, elbows, joints,& necessary space parts complete all as specified

Excavation in trenches n. exc 1.5 Mtr wide and n. exc 1.5 mtr in depth and getting out in hard soil.

Returning Filling in including spreading, leveling, watering & well ramming in layers n. exc 25 Cm.

Removing excavated/Surplus soil n exc 50 Mtr & depositing where directed at a level n. exc 1.5 Mtr above the starting point.

Taking down/ existing cable from trench, hard standing, wall etc and re-root, remove connection from MCB DB panel and re-connect after the re-root of cable with saddle complete all as specified and directed by engr-in-Charge.

M&L for in repair of jointing & testing heat shrinkable cable joint kit , straight through , out door type for 1100 volts LT XLPE/PVC insulated cable of aluminium conductor up to 25 sqmm 3-1/2 core cable including necessary jointing work all as specified & directed

Excavation in trenches not exc. 1.5 mtr wide and not exc 1.5 mtr depth in any type of soil (soft/loose/hard/dense soil) for laying / taiking up/ taking down of water pipes of any size and type including levelling of bottom surface to required level all as specified and directed by Engineer-in-Charge.

Returning filling in trenches including spreading, levelling, watering and well ramming soil in layers not exceeding 25 cm thick all as specified and directed.

Removing excavated material from site to a distance n. exc. 50 mtrs away and depositing where directed at a level n. exc. 1.5 mtr avove the starting point all as specified and directed by Engineer-in-Charge.

All as per item no.04 above but 15 mm bore make-Swastic,Jindal or Equivalent.

Material and labour for Cutting and screwing existing steel tubing or alterations or additions of following size:20mm bore.

All as per item no.06 above but 15mm bore .

Supply and Fix Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed on 15 mm bore.

Supply and Fix Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed on 20 mm bore.

Supply and Fix Plug type bib taps,cast iron, screwed for iron pipe and fixed at 20 mm bore.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars, walls etc.

M & L Cement concrete 1:2:4 (Using 20 mm graded stone agg) as in lintels upto 1.5m clear span, cills,hold fast, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed

Preparation of new plastered surface of external wall and chajjas and making the surface smooth with sand paper and priming the surface with alkali resistance primer paint for external surface, over primed surface applying two coat of cement base paint incl curing complete all as specified & directed.

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) as directed by Engr-in-charge. Fe-410 (Gde-250 quality-B)

N.U. MIRZA (BID ID -3515808)

SHREE SAMARTH SERVICES (BID ID -3521909)

M/S Nilesh Enterprises (BID ID -3521848)

MS VAIBHAV R MAHAJAN CONSTRUCTIONS (BID ID -3513741)