Installation of a high-mast At Tipu Sultan Chowk, in Khanapur TP Limit

Installation of a high-mast At Tipu Sultan Chowk, in Khanapur TP Limit

Supplying PVC flexible conduit pipe . mm dia fixing on surface

over inverted tapered wooden plugs or phill plugs or rawl plugs and

clamped using heavy gauge saddles at an interval of 300 mm using NF

Wiring for lighting/power circuit using one of FRLS PVC insulated

1100V grade, multistrand copper wire with low conductor resistance

single core in open or concealed system of wiring with specified IS...

Fabrication, Supplying, Erection, Testing and Commissioning of . ms long

Polygon high mast with Single/Multiple telescopic sections having, (minimum overlap distance of 1.5 times of top section) thick...

Supplying and drawing Flexible Multicore Cable manufactured with

electrolytic grade flexible copper with low conductor confirming to

IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for

Supply of LED floodlight luminaire with pressure die cast aluminium housing

body for optimal thermal dissipation. Lamp compartment comprising of anti

glare clear diffuser with Injection moulded polyca...

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over

existing pole / wall ceiling including clamps, bolts, nuts and wiring

using suitable capacity wires

Supplying & fixing of Porcelain fuse channel with cut out on

existing wooden/panel using necessary nuts, bolts and washers.

Supply and fixing of 4pole power contactor with NO/NC contacts on

existing wood/panel board using necessary bolts, nuts, washers

and wiring etc., complete with AC-3 Rating and as per IS-13947.

Supplying & fixing miniature circuit breakers on existing MCB

distribution boards using necessary fixing materials and 'C' Type

curve, indicator ON/OFF, energy cross-3 with Short circuit breaking

Supplying, fixing and wiring rotary selector switch suitable for

Supplying . A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are ...

Supplying and fixing angle iron frame work fabricated out of M.S.

angle iron. and M.S. Flat.with bolts, washers etc., and painted

with 2 coats of red oxide and then two coats of approved paint.

Fabricating supplying and mounting MS box made out .SWG

suitable for floor /wall mounting, fully weather proof with provision

for better heat dissipation, provided with hinged front cover,

Supplying and fixing Microprocessor based Electronic timer (without

contactor, Din Mounting using necessary bolts, nuts and washers etc.,.)

3-120sec setting.

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works.

The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooki ( S R Volume-1 )

Supplying and fixing hylum plastic sheet 3mm thick with necessary

nitches for fixing switches, regulators etc., and fixing on existing

wood or metal box using N. F. screws.

11.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath

Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975

Laying of cable in Existing Trench/GI pipe/ Stone Ware /RCC Hume pipe using Wooden /Aluminum Rollers as directed by the departmental staff PART -IV, PAGE NO - 9

Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards a...

Refilling the cable trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm. Thickness including depositing of the surplus earth with a lead ...

Laying the GI Pipe 80 mm to 150 mm dia at Drainage Water Supply Crossing including fixing collars elbows, bends, Tees and other fitting with Cuts and Threads wherever necessary complete.PART NO-IV, PA...

GI Pipe - 50 mm Dia

GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long,3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg PART-III, PAGE NO-17

Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each PART-III PAGE NO-17

Good Quality Salt for grounding purposes packed in 50 Kg gunny bag PART-III PAGE NO-17

Digging of Pit for providing GI Pipe type Earthing LABOUR RATE PART -IV PAGE NO - 1

8 SWG GI Wire MT - PER KG (4.064 mm Dia), Std Wt: 125 Kg/KM PART - III , .PAGE NO - 3

Brass Cable Gland PART -III ,.PAGE NO -25