Electrical Works

Design, Engineering, Supply, Erection, Testing, Commissioning and Handing over of 8Persons Capacity Passenger Gearless without machine room Lift as per following technical specifications Technical Specifications: 1.Location:Guest block, Lok Bhavan. 2.No of Lift: One only. 3. Type of Lift: Gearless Passenger Lift without machine room 3A.Elevator type : Passenger elevator PWI08/10-19 3B. Product : Monospace 3C.Technical Platform : Monospace smart 4 .Capacity of Lift : 8 Persons Passenger 5 .Speed: 1.0 mtr /Sec 6.Type of Drive: Microprocessor based variable voltage variable frequency V3F Drive with enhanced ride comfort and leveling functions.7.Position of Machine: Directly above The lift well. 8. No of floor: Ground + 1 floors. (2 landings) 9 .Total Travel: 5.42 Mtrs Approximate. 10. Leveling Accuracy: High level accuracy With smooth & jerk free stopping.11 Construction of car: 18 SWG SS scratch proof car body with false ceiling, LED lights, regular circular fans, silver brushed Stainless Steel handrail & granite flooring.12. No. of Landing Entrance: G+1 floors (2 landings)13. No. & Position of Car Entrance: One in front only.

24. Lift Well: RCC construction with Brick masonry / concrete.25. Emergency Alarm Bell: Battery Operated Alarm Bell to be provided with automatic charging device.26. Emergency Light: Battery operated Light to be provided with automatic Charging device.27. Fireman’s switch: To be provided at ground floor. 28. Minor Builders Work: To be provided by Lift contractor. 29. Scaffolding: To be provided by lift Contractor.30. Stainless Steel sill angles and facia Plates: To be provided by lift contractor.31. Steel for lift Machinery: To be provided by lift contractor.32. Servicing and Maintenance: Lift Contractor should provide free comprehensive servicing and maintenance during the guarantee period.33. Automatic rescue device – To facilitate the landing of the lift to the nearest floor at the time of power failure. This shall consists of suitable type battery system with charge inverter, under voltage protection system etc. complete with all accessories 34. Provision of intercom with phone: To be provided by the lift contractor.

35. Lift License: Preparation of drawings, Lift contactor should do payment of charges to CEIG and insurance policies if any and obtaining CEIG safety certificate and lift license as per lift act.36. Floor annunciator system with music: To be provided in car.37. Special features: (a). Infra-red door sensor with Full height screen. (b). Stainless Steel signal fixtures.(c). Vandal proof S.S. button with S.S. cover.(d). Stainless steel door frames for landing doors.(e). Stainless Steel hand rail at a height of 850 mm - 950 mm.(f). ON-OFF switch for fan and light.(g) Over load warning indicator with audio announcement.(h). BMS compatibility(i). Call register signal (j) Mirror at rear(k). Braille buttons (l). Full car operating panel - Press N Speak phone(m). Steel ladder 38. Over speed governor, phase failure and phase reversal relay, alarm bell, Guide brackets for car and counter weight, rubber padding under the unit, Motor of adequate capacity, electromagnetic brake with compression springs etc, car safety gears, buffer, electro mechanical door locks, emergency

key, side supporting angles, over load, ender voltage, short circuit earth fault etc protection devices, final limit switches, main suspension ropes, counter weights, lifting joist for machinery mounting and all other accessories. 39. Guarantee: Guarantee for the Materials & working of lift complete for a period of not less than one year.40. Site testing as per IS 7900 to be carried out.41. Additional special features to be added in the lifts for people Correction drive to next level Emergency Alarm @ Main Floor Car Call backwards Overload function, constant indication/Buzzer Bypass load Function Auto Cut off Fan and Light Manual Rescue Operation Centralized Hoisting for lesser vibration and smooth travel Pit Ladder Micro movement Led Based Buttons L.W.D. (Load Weighing Device) Direction & Position Indicator In Car & Landing Advanced Car Position Indication Automatic Brake Test function every 11hours Every run brake supervision Phase reversal functioning Signal Fixtures +10% to –10% Voltage Fluctuation Withstanding Capacity Door Open Button / Car Emergency Light [TYP_ELEC_FEAT_FRD(IND_SS)] Curtain of light, fix to sill Accurate Relevelling, Automatic, Closed Door Car door lock

supply and clamping of 3 1/2 x 50 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

supply and fixing of brass cable gland for 3-1/2 x 50 sq.mm. PVC armoured LTUG cable with earth connection

supply and providing cable end termination of 3-1/2 x 50 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and providing of maintenance free earthling electrode dual pipe flat technology model maintenance free earth 502 consist of 2mtr long 47mm dia outer pipe with 3.2mm thick 25mm dia inner pipe 2.6mm thick terminal flat of 30x10/12 x 12mm, the entire construction processed with hot tip galvanizing, outer surface up to100 microns all inner annular space filled with highly conductive and non-corrosive nature crystalline material along with electrode moisture booster compound of 1x25 kg bags will be supplied to fill surround the pipe at the time of installation. (Moisure retention, conduction and non-corrosive nature

supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 4 no. 32A DP MCB as outgoing and 1 nos. 63A FP MCB as incoming on wall with earth connection only. Higher End

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch on suitable module surface mounting Box (GI ) with module cover plate (plastic) on wall with connections. Higher End

Supply and run of 2 of 4 sq.mm. PVC insulated Scunsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 4sq.mm copper wire with painting of suitable colour

Supply and Run of 4 of 25 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 25 sq mm copper wire with painting of suitable colour.

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection by 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper wire with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) ( 4 points / Coil) Higher End

Supply and fixing of WT Bulk Head Fitting With Guard Sutiable For 15W LED Bulb

GST at 18%

Please Enable Macros to View BoQ information