WBPHED/EE/MLMD/NIeT_13 of 2021-2022 SL. NO. 09

Amount

PART-A - PMCC cum PDB Panel

Charges for necessary disconnection of power line and dismentling of existing damaged electrical and electronics spares following necessary precautions from each individual Feeder within the PMCC Panel installed at Intake Pump House all complete upto entire satisfaction of EIC.

MCCB FEEDER- 63A (6 nos)

TPN MCCB(63Amp., 25KA) Adjustable O/L, S/C Protection

Rotary Handle for above MCCB

Auxillary Contacts for above MCCB

SP MCB, 6Amp, 10KA

ON Indicator(GREEN) LED Type, 230V, AC

OFF Indicator(RED) LED Type, 230V, AC

MCCB FEEDER- 32A (1 no)

TPN MCCB(32Amp., 25KA) Adjustable O/L, S/C Protection

Rotary Handle for above MCCB

Industrial Plug 32A (3P + N + E)

S/D STARTER-55KW (4 nos)

TP MCCB(200Amp., 36KA) Adjustable O/L, S/C Protection

Rotary Handle for above MCCB

Spreader link broadened with phase barriers

Power Contactor, AC-3 Duty, 140Amp., 230V, AC

Motor Protection Relay(0.5-60A, Over Current, Under Current, Phase Loss, Phase Imbalance, Phase Reversal and Locked Rotor Protection)

Star Delta Timer(3-60Sec., 240V, AC)

Voltage monitoring relay (Phase failure, unbalance, phase sequence under voltage & over voltage protection with digital display)

SP MCB, 6Amp, 10KA

ON Indicator(GREEN) LED Type, 230V, AC

OFF Indicator(RED) LED Type, 230V, AC

Trip Indicator(AMBER) LED Type, 230V, AC

Emergency Stop Switch( 40mm) Push to Trip, Turn to Release with 1NC Contact.

VALVE ACTUATOR STARTER (8 nos)

Motor Protection Circuit Breaker(10-16Amp.)

Rotary Handle for above MPCB

Power Contactor, AC-3 Duty, 16Amp., 230V, AC

Thermal Over Load Relay(1.8-2.5Amp.)

Over Load Relay Mounting Kit

Open Indicator(Green)LED Type, 230V,AC

Close Indicator(Green)LED Type, 230V,AC

Running Indicator(Red)LED Type, 230V,AC

Trip Indicator(AMBER) LED Type, 230V, AC

SP MCB, 6Amp, 10KA

Logic Contactor, 5 Amp., 230V, AC

Aluminium Busbar (25 mm X 6 mm)

Body Derusting and Painting of entire unit of PMCC Panel with two nos. coats of paint with light grey (RAL 7032) painting of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint as per direction of EIC.

Charges for fitting fixing of supplied spares (as in items in sl. no. 2.00 to 6.00) along with fabricating Al. busbar in sl. no. 7.00 for modification and alteration of existing busbar incl. necessary mechanical and electical hardware as supplied by agency (such as screws, nut-bolts, washers, cable tie, pvc tape, sockets etc) making internal connection by supplied suitable size Cu wire along with reconnection and (8 hrs. continuous running) by checking motor current data ( Delta operation) or other releavent operating parameters all complete upto entire satisfaction of EIC.

PART-B - CONTROL DESK :

Charges for necessary disconnection of power line and dismentling of existing damaged electrical and electronics spares following necessary precautions from control desk panel installed at Intake Pump House all complete upto entire satisfaction of EIC.

PUSH SWITCH

Green Push Button(22.5mm) with 1NO Contact.

Red Push Button(22.5mm) with 1NC Contact.

Yellow Push Button(22.5mm) with 1NC Contact.

Black Push Button(22.5mm) with 1NO Contact.

ILLUMINATION LAMP

OFF Indicator(RED) LED Type, 230V, AC

ON Indicator(GREEN) LED Type, 230V, AC

DIGITAL METER

Digital Ammeter, CL-1, 96mmX96mm

Digital Voltmeter, CL-1, 96mmX96mm

Body Derusting and Painting of entire unit of Control Desk panel Panel with two nos. coats of paint with light grey (RAL 7032) painting of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint as per direction of EIC.

Charges for fitting fixing of supplied spares (as in items in sl. no. 12.00 to 14.00) along with necessary mechanical and electical hardware as supplied by agency (such as screws, nut-bolts, washers, cable tie, pvc tape, sockets etc) making internal connection by supplied suitable size Cu wire along with reconnection and testing of the starter panels under load condition up to the entire satisfaction of EIC.

PART-C - CRANE PANEL

Charges for necessary disconnection of power line and dismentling of existing damaged electrical and electronics spares following necessary precautions from crane panel installed at Intake Pump House all complete upto entire satisfaction of EIC.

INCOMER- 63A

TPN MCCB(63Amp., 25KA) Adjustable O/L, S/C Protection

Rotary Handle for above MCCB

OUTGOING

Motor Protection Circuit Breaker(22-32Amp.)

Rotary Handle for above MPCB

Power Contactor, AC-3 Duty, 32Amp., 230V, AC

Thermal Over Load Relay(7-10Amp.)

Over Load Relay Mounting Kit

SP MCB, 6Amp, 10KA

Body Derusting and Painting of entire unit of Crane Panel Panel with two nos. coats of paint with light grey (RAL 7032) painting of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint as per direction of EIC.

Charges for fitting fixing of supplied spares (as in items in sl. no. 19.00 to 20.00) along with necessary mechanical and electical hardware as supplied by agency (such as screws, nut-bolts, washers, cable tie, pvc tape, sockets etc) making internal connection by supplied suitable size Cu wire along with reconnection and testing of the starter panels under load condition up to the entire satisfaction of EIC.

Supply, delivery and storage at site of following FRL wire for different panel at Intake site:

1.5 sqmm 1.1 kv grade PVC insulated copper flexible FR wire (90m/coil)

2.5 sqmm 1.1 kv grade PVC insulated copper flexible FR wire (90m/coil)

6sqmm 1.1 kv grade PVC insulated copper flexible FRLSH wire (90m/coil)

16 sqmm 1.1 kv grade PVC insulated copper flexible FR wire(90m/coil)

MAKE AS PER DEPARTMENTAL APPROVED VENDOR LIST CIRCULATED VIDE MEMO NO.PHE/IV/2277/W-181/19 DATED- 25/09/2019

Add GST @12%

Add Cess @ 1%

DEY ENTERPRISE

NABAUDYAG ELECTRICAL ENGINEERING CO OP. SOC. LTD.