Installation of 2nd point T/f on existing feeder due to over load 250/400/600 KVA T/f 2nd point LT Line at Kathula Morh, Jhalwa in BP 2022-23, including loading, U/L and Carriage of materials from Store Center Naini to Dump site.

Amount

“Installation of 2nd point 11/0.4 250 KVA T/f on existing feeder due to over load/250 KVA T/f 2nd point nyay nagar because of existing 400 KVA T/f running at full load/2nd point T/f 11/0.4 KVA 250 KVA at Vishnapuri adjacent to existing 400 KVA T/f/new T/f due to Low voltage problem at area SDM Chaurha Kasari Masari/jarjar line and removing bas balli connection area at SDM Chaurha Kasari Masari/2nd point 11/0.4 KV 250/400 KVA at Manish Halwai adjacent to 630 KVA T/f running at full load/ increasing Capacity from 100 KVA to 250 KVA T/f at Maharishi Kalindipuram/Installation of new 250 KVA at Abbas Kasari Masari/LT Line at Kathula Morh, Jhalwa in Business Plan 2022-23, including loading, unloading & Carriage of materials from Store Center Naini to Dump site and vice-versa.The aforesaid work is to be supervised by Executive Engineer/SDO, E.U.D.D., Bamrauli, Prayagraj.

Errection&Commissioning of (3x120+1x195+1x16)/ (3x95+1x70+1x16) sq.mm ABC,necessary clamps, I-Hook, dead end clamp, suspension clamp,pierising connecter 1x35 sq.mm. & 1x16 sq.mm. PVC cable as per RESSPO norms will be arranged by the contractor exept AB cable and Weasel Conductor as per Resspo and Electrical Safety rule

Errection & Commissioning of distribution boxes/kiosk on the LT poles including all clamps & materials required, connections & sealing its connection in between Distribution Box & ABC 1x35 sq. mm LT PVC cable (all required Local materials including Distribution box arranged by the contractor as per Resspo and Electrical Safety rule)

Laying of single 11 KV 3x120 sq mm XLPE cable by manual drilling /hanging method. The cable shall be laid at the depth of 900 mm from the surface of road. The cable shall be laid strictly in compliance to RESSPO Norms and Electrical safety rules. (The rates must be quoted for each cable of length per mtr.)

Supply and Fixing of Heat Shrink cable type end Terminations suitable for 11 KV, 3x120 sq mm XLPE cable Outdoor jointing kit

Earthing of L.T Cubical box/support/pannel complete with the help of M.S. rod 16 mm dia and 2.5 mtr. long, fastening of G.I. wire with clamps/X-arm/support to M.S. earth rod.

Fixing & grouting of stay rod with cement, sand and bricks ballast in ratio 1:4:8 and fasteniong the stay wire with pole and stay rod nozzling.(Grouting and all material will be provided by the contractor)

Erection of L.T.800 A cubical Box, with the help of channel, clamp & nut bolt etc. as per Resspo and Electrical Safety rule

Erection, grouting, plinthing, of single support pole 11 mtr long STP for LT line, including fixing of necessary clamps grouting in ratio 1:4:8, cement, stone grit & coarse sand, plinthing of support of size 0.4x0.45x0.3 Mtr.with cement sand& bricks blast in ratio 1:4:8 and 12 mm thick plastring around the plingth in ratio 1:2:4 with 12 mm thickness curing of plingth should be done properly. (All material will be supplied by the contractor Except 11 mtr long STP)

Erection, grouting, plinthing, earthing & painting of 11 mtr long sub station type D/P for mounting of T/Fs with all accessories like 11 kv fuse set, TPMO, top channel, grouting in ratio 1:4:8, cement, stone grit & coarse sand, plinthing of support of size 0.4x0.45x0.3 Mtr.with cement sand& bricks blast in ratio 1:4:8 and 12 mm thick plastring around the plingth in ration 1:2:4 with 12 mm thickness curing of plingth should be done properly as per Resspo and Electrical Safety rule (All material will be supplied by the contractor Except 11 mtr long STP,TPMO,fuse set)

Erection & commissioning of Nyay nagar, Vishnapuri, SDM chauraha, Manish halwai, Maharishi, Abbas, Tiwari Talab T/F 250/400 KVA on D.P. along with HT/LT connections. Complete in all respect,as per Resspo and Electrical Safety rule

Wire mash fancing of 400 KVA T/f & DP Box as per standerd schedule.

Erection, grouting, plinthing, of single support pole 9 mtr long STP/PCC Pole for LT line, including fixing of necessary clamps grouting in ratio 1:4:8, cement, stone grit & coarse sand, plinthing of support of size 0.4x0.45x0.3 Mtr.with cement sand& bricks blast in ratio 1:4:8 and 12 mm thick plastring around the plingth in ratio 1:2:4 with 12 mm thickness curing of plingth should be done properly. (All material will be supplied by the contractor Except 9 mtr long STP)

Errection&Commissioning of ACSR DOG/Weasel conductor with necessary clamps, V arm, Pin/Disc insulator as per RESSPO norms and Electrical Safety rule

GANGA ELECTRICALS

M/S Ajay Tripathi

J.L. Enterprises

M/s Lucky Enterprises

M/s A.E. Enterprises

Urmila Associates