PROVN OF CERTAIN REV AND MINOR WORKS UNDER GE (AWC) MHOW

Amount

M&L for PCC 1:3:6 type C2 (with using 40mm graded aggregate) as in bed of drain including forming channels complete all as specified and as directed.

M&L for extra forming fair finished drain channel 30cm inner in cement concrete with using extra cement concrete forms, moulder, mitredstopped ends etc complete all as specified and directed.

Reinforced concrete pipes, class NP2, laid and jointed complete with collars of 300 mm bore of pipe complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed

Demolition of Brickwork or stone/boulder masonary, built in cement mortar incl all quions,arches, pillars, etc. all as specified and directed

M & L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm , in vertical surface etc.set jointed in neat cement sluury and pointed in white or coloured cement to match over & incl 10 mm thick screed bed built in CM 1:3 all as specified and directed.

M&L for glazed ceramic coloured tiles on vertical surfaces 450x350x7 mm / 450x300x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick backing coat to receiving to wall tiles in Cement mortar 1:3 complete all as specified and directed.

M & L machine pressed precast concrete 80 mm thick glossy interlocking paver block M-40 Grade to IS 15658-2006, with grey cement and no pigment laid over dry sand cushioning, filling of joints with sand. colour and shape approved by GE,complete all as specified and directed. (Note : Sand cushioning shall be measured and paid separately) .

M & L sand filling under floors or interlocking tile or in foundation including watering and consolidation complete all as specified and directed

M & L precast cement concrete curved stone with solid blocks, exc. 10 cm in width type B1 1:2:4 (20 mm graded aggregate) set in cement mortar 1:6 etc. , complete all as specified and directed.

M&L for RCC (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) as in foundations, including rafts, footings, foundation beam, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L for RCC (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) as in Columns, pillars, peirs, posts, and struts complete all as specified and directed.

M&L for RCC (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) as in beams, bressummers, lintel over 1.5 m span complete all as specified and directed.

Formwork to sides soffits of floor or roof beam, beam hauchings, bressummers, lintels, shelves etc. including supports, overhangs, etc, complete all as specified and directed.

M&L brick work with fly ash modular bricks straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cills, steps, seismic and other similar bands, plinth courses, string courses, parapets and railing upto 60 cm in height, coping, kneelers, apex stones bed plates, etc and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary use and waste of form work complete.

M & L 15 mm thick rendering on brick work or concrete surfaces in cement mortar 1:4, surface finished even and smooth without using extra cement complete, all as specified and directed.

M & L 10 mm thick rendering on brick work or concrete surfaces in cement mortar 1:6, surface finished even and smooth without using extra cement complete, all as specified and directed.

M&L preparing of newly plastered or unplastered surfaces of walls, cornices etc and applying two coats of cement base paint over one coat of priming coat complete all as specified.

M&L preparing of newly plastered or unplastered surfaces of walls, cornices etc and applying two coats of distemper oil emulsion over one coat of priming coat complete all as specified.

M&L preparing of old plastered or unplastered surfaces of walls, cornices etc and applying one coat of distemper oil emulsion complete all as specified.

S & F portions framed work and hung as gates, including pintle hinges, stops hand-made sliding bolts, etc and similar work complete all as specified and directed.

S & F joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. including all necessary cutting and welding as directed, Grade Fe-410-W Gde E-250 Quality- Aas directed,

S&F 2nd class hard wood 35 mm thick Plain, framed, pannelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, complete as specified.

S&F 2nd class hard wood 35 mm thick Glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc, (without sash bars),edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc, size of members of shutters as specified in SSR Part I, Section 8, clause8.24(a) complete all as specified and directed..Note :- Glass pane and wire mesh shall be measured and paid separately in respective supply only item.

S&F 300mm mild steel ordinary rat rail rod pattern springs including roller & roller plate complete all as specifeid and directed

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F aluminium anodised barrel tower bolts 150 mm long of extruded section and fixed complete all specified and directed.

S&F aluminium handles, size 150 mm cast type, anodised complete all as specified and directed.

S&F 250 mm long aluminium alloy, anodised sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and directed.

M & L 150mm length floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor complete all as specified and as directed

S & F powder coated aluminium sliding glazed windows with three track , three shutter sliding with following specification and making good the adjacent side etc . shifting of existing cooler stand where required complete all as specified and as directed by Engr-in-charge. (i) Windows frame of cross section 101mm x 44mm x 1.5mm thick. (ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick. (iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick. (iv) 4 mm thick tinted glass superior quality. (v) IDPE Rubber guasket for fixing of glass. (vi) Locking cleats per shutter -01 Nos. (vii) Sliding rollers per shutter - 02 Nos. (viii) Aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56mm for shutters 01 Nos. (Ix) fixing screw for frame with wall per windows- 08 Nos

S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L Preparation of new or previously untreated steel and iron surfaces of any description, not otherwise description, over 10 cm width or girth apply two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.

M & L Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise description, over 10 cm width or girth apply two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out any type of soil.

Excavating over areas, n exc1.5 m depth and getting out for foundation, etc in any type of soil complete all specified.

Excavating over areas, exc 1.5 m depth but not exc 3.0m dee and getting out for foundation, etc in out any type of soil.

Surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting out soft/loose soil

Removing Excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick with soils.

Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete.

M & L for flat Form work to sides of concrete foundations rafts etc.

M & L for flat Square, rectangular or polygonal Form work to sides of pillars, posts, struts, columns and stanchions.

M & L for flat Form work to sides and soffits of floor/plinth or roof beams, lintels, cantilevers, shelves including supports etc.

M & L for RCC design mix M-25 as in foundation, footing, plinth beam etc

M & L for RCC Design Mix M-25 as in colums, posts and struts.

M & L for RCC Design Mix M-25 as in Roof Beams

M & L for RCC Design Mix M-25 as in slab supported on walls, beams and similar work

M & L for RCC Design Mix M-25 as in chajja and similar work

Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.

Description same as per Item no. 51.00 but 5mm dia and over upto and including 10mm dia in stirrups, spacers,distribution and binders

Fair finished flat Form work to sides or soffits of suspended slabs such as roof slabs, floor slabs and similar work not exceeding 200 mm thick.

M&L for form work as in chajja

M&L brick work with sub class 'B' modular brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete.

M & L Plastering 15 mm thick in two layers of 10 mm thick in bottom and 5 mm thick with WPC of top layer in Cement Mortar 1:4 on Fair Faces of Brick Wall, Cement block wall or on Concrete Surfaces, Surface Finished Even and Smooth without using Extra Cement complete all as specified and as directed.(WPC will be measured and paid separately)

Supply only Integral water proofing compound

M&L for 10 mm thick rendering on brick work or concrete surfaces of internal wall in cement mortar 1:6 surface complete

M&L for 5 mm thick rendering in cement mortar 1:3 on brick work or concrete surfaces as in ceiling.

Preparing newly plastered surfaces of walls and applying two coats of cement base paint.

M&L for three coats of white wash on newly plastered surfaces of wall including preparations complete all as specified and as directed.

M&L for applying three coats of white washing on new plastered surfaces of ceiling including preparation complete all as specified and as directed.

Moorum / Red Bajari filling in floor or pavings, laid in layers n. exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M&L for 150 mm thick Hard core of broken stone/boulder , broken to gauge n exc 63 mm.

75 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in Plinth protection including finishing the surface even and smooth without using extra cement.

M & L non-skid / mat finish coloured joint free ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:4 complete all as specified and directed.

M&L glazed ceramic coloured tiles, 300mmx200mm x 7 mm thick on vertical surfaces such as dados , skirting and risers to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick backing coat to receiving to wall tiles in Cement mortar 1:4 complete all as specified and directed.

S & F 1000 Ltrs capacity rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I complete all as specified and directed

S & F ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (Minimum weight 210 gms) complete.

Supplying, fixing, 15mm dia bore galvanised steel water tubing medium grade with all fittings fixed to walls and ceilings or laid in floors, complete.

Supplying, fixing, 20 mm dia bore galvanised steel water tubing medium grade with all fittings fixed to walls and ceilings or laid in floors, complete.

S & F 10 litre capacity PVC low level valveless, syphonic action type flushing cistern, white, with inlet, ball valve, float and handle includung 32 mm dia PVC pipe for conneting to EWC complete all as specified and directed.

S & F PVC connection 15 mm dia 600 mm long with PTMT nuts at both ends complete all as specified and directed.

S & F vitreous china wash basin flat back of size 550x400mm pedestal pattern incl brackets, cutting for and pinning in ends or brackets, 32 mm dia waste coupling and down pipe also,etc, complete all as specified and directed.

S&F pillar tap15 mm dia cast copper alloy, with capstan heads chromium plated screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts complete all as specified and directed.

S & F 110 mm dia bore. PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed in floor/ trenches complete all as specified and directed.

S & F 75mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed in floor/ trenches complete all as specified and directed.

S & F 110 mm dia bore PVC (SWR) bends any radius with solvent cement joints, fixed complete all as specified and directed.

S & F 75mm dia bore PVC (SWR) bends any radius with solvent cement joints, fixed complete all as specified and directed.

S & F 110 mm dia bore PVC (SWR) junction single, single (T) equal or unequal with solvent cement joints, fixed complete all as specified and directed.

S & F 75mm dia bore PVC (SWR) junction single, single (T) equal or unequal with solvent cement joints, fixed complete all as specified and directed.

S & F PVC (SWR) nahani trap with grating having diameter of outlet 75 mm including joining to waste pipe with solvent cement complete.

S & F vitreous china squatting pan “ORISSA PATERN” of size 580 mm X 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc complete all as specified and directed.

S & F 15 mm Stop cock / angle cock chromium plated with high pressure crutch or butterfly handle screwed with both ends for iron pipe or PVC connection complete all as specified and directed.

S & F 15 mm Bib tap fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15 mm dia consealed type stop valves, cast copper alloy, chromium plated, screwed down, high pressure with handle, screwed both ends for iron pipe or union complete all as specified and directed

S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete.

S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – II 2020 and as directed by GE/Engineer-in-Charge.

S & F 100 mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete .

S & F aluminium 150 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete.

S & F 150 mm size aluminium handles cast type, anodised ISI marked complete

S & F 200 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete.

S&F swivel shower of PTMT any coloured for fixing with 15mm pipe (Minimum weight 40 gms)

S&F Steel ventilators of approved make with top hung shutter including hinges, steel peg stay, coomplete, all as specified and as directed.

S&F Steel ventilators of approved make with top hung shutter including hinges, steel peg stay, coomplete, without glazing bars fdovetailed or welded complete all as specified and as directed

M&L mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified.

Supply only Galvnised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm

Supply only 3 mm thick (nominal) Sheet glass , ordinary quality , in squares, not exceeding 0.50 sqm each pane fixed with beads ( supplied with joinery ) complete all as specified.

S & F in repair Gun-metal, globe of gate balve /flush cock of 20mm bore with iron wheel head, screwed both ends for iron pipe etc all as specified.

S&F in repairs powder coated steel peg set having 06 Nos spikes fixed to wall complete all as specified and directed (Make as spproved by GE)

S & F in repair brass chromium plated towel rail 20 mm outer dia Bracket type, 60 cm long between flanges with and including chromium plated brass screws and wooden / plastic cleats, complete.

S & F in repair corner shelf of 300 mm size with ABS brackets complete.

M & L 60 mm thick Machine pressed precast concrete interlocking paver blockfixing with grey cement and pigments OF " I " shape or as approved by GE ,and any colour and size confirming to IS 15658-2006 of M-35 Grade set , laid over 50 mm (average) thick dust sand cushioning,filling of joints with sand & compaction using surface vibrator after filling of joints lain in any pattern as decided by Engineer-In-Charge including packing of sides by cement concrete finishing surfce even and smooth complete all as specified and as directed. Note : Sand cushioning shall be measured and paid separately .

M & L cement concrete bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate for the 150 mm internal dia of pipe complete all as specified and directed

M & L providing pre-cast cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in cover slab of manholes, septic tank, soak well etc set in cement mortar 1:4 with plain fair faces including chamfered weathering, throating etc including necessary use and waste of form work complete.

M & L 10 mm thick plaster in one layer in CM (1:3) over concrete roof padding, cement mortar mixed with and including chemical compound PIDIPROOF LW of DR FIXIT of PIDILITE INDUSTRIES LTD mixed in proportion 200 millilitre per 50 Kg cement or STP No. 1 (Liquid) of STP Ltd. in proportion 200 ml per 50 Kg cement as per manufacturers instructions laid when concrete is still green and finishing the surface fair and even without using extra cement complete.

Water proofing treatment on "Non approachable / non accessible roof" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer all as specified and directed complete. (i) Properly cleaning and drying concrete surfaces. (ii) Applying a coat of oxidised bitumen based solvent primer 0.3 Kg / Sqm (iii) Laying APP based polymeric membrane of 3 mm thick reinforced with polyster non wove fabric laid with 100 mm over laps sealed and bounded to the surfaces by 'torchon' method. (iv) Applying coat of bitiminous aluminium paint @ 200 Gram / Sq M (minimum) in two coats.

Supplying, laying, jointing and testing salt glazed stone ware drain pipe of size 150 mm internal dia of pipe grade 'A' confirming to IS-651-1980 laid in trenches and jointed cement kmortar 1:1 complete all as specified and directed.

M&L Point wiring with 1.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FR LSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including rigid non- metallic PVC concealed conduit (medium grade) concealed in wall/ceiling with and including 1.5 sqmm single core PVC insulated multistranded, unsheathed FR LSH copper cable as continuos earth continuity conductor (green in color) with cast iron/pressed steel modular terminal boxes any size module, conceiled on wall and fixed by means of brass screws incl modular cover plats and cover frame any size/ module for mounting or housing switches, socket outlets,fan regulators etc. incl all other fixing accessories for one light/ fan / exhaust fan/ call bell point controlled by one 5/6 Amps switch, complete all as specified and directed. Make of cable :- Havells/ Finolex /RR kabel/ L&T Make of PVC conduit (FRLS)- Presto Plast / Finolex/ Jindal/ Asian/ AKG/Polycab

Description same as per item no. 110.00 but for One 3 pin, 5/6 amps socket outlet point on independent board controlled by one, one way 5/6 amps switch

S&F of Ceiling rose three terminals surface bakelite type, AC, 50 HZ, 230V Make - Havells / Anchor / Legrand / C&S

S&F modular switch 1 way 6 A , 1 module complete all as specified and directed. Make - Havells / Anchor / Legrand / C&S

S/F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed. Make - Havells / Anchor / Legrand / C&S

Supply and fixing modular white cover plate with frame 3 module complete all as specified and as directed. Make - Havells / Anchor / Legrand / C&S

Supply and fixing modular white cover plate with frame 6 module complete all as specified and as directed. Make - Havells / Anchor / Legrand / C&S

Supply and fixing modular metal flush box 3 module complete all as specified and as directed. Make - Havells / Anchor / Legrand / C&S

Supply and fixing modular metal flush box 6 module complete all as specified and as directed. Make - Havells / Anchor / Legrand / C&S

S&F surface /wall mounted LED batten (other than slim channel type) poly carbonate housing for retrofit LED tube T-8 type upto 1x22 watt, 4 feet long pre wired incl integrated electronic driver complete with all connected accessories all as specified and directed. Make - Wipro / Crompton / Philips / Bajaj

S&F ultra bright LED poly carbonate tube light 4 feet long 18 to 20 watts with THD less than 15% very high effficiency suited for T-8 tube light luminare with system efficiency 120 lumens per watts, fixture lumen package should be ≥ 2200 lumen. High quality polycarbonate end cap in white finish and snap fitted to the housing complete all as specified and directed. Make - Wipro / Havells / Philips / Bajaj

S&F MCB DB SPN 8 way with 200 Amps rated bus bar ,230 volts, 50 Hz complete all as specifed and directed. Make:- L&T / Havells /schneider

Supply & Fix MCB SPN 40 Amps current rating 'C' series 10 KA breaking capacity complete all as specified and directed.Make : L&T / Havells /schneider

Supply & Fix MCB SPN 6-32 Amps current rating 'C' series 10 KA breaking capacity complete all as specified and directed. Make : L&T / Havells /schneider

Supply & Fix MCB SP 6-32 Amps current rating 'C' series 10 KA breaking capacity complete all as specified and directed. Make : L&T / Havells /schneider

S&F Sub main wiring with 2 core,4 Sqmm, PVC insulated PVC unsheathed stranded FR LSH copper conductor cable in and including PVC concealed/ surface conduit of earth wire with 1 x 2.5 Sq mm copper cable fixed along with the sub main in PVC conduit and connecting to earth dolly complete including taking down old sub main wiring all as specified and directed. Make:- Finolex /RR kabel/ Havells

S&F exhaust fan non metalic single phase 230 volt of size 250 mm sweep with louver all as specified and as directed Make :- Bajaj Model -Maxima DX / Havells , Model- Venti Air DX/ Crompton , Model:- Brisk Air

S&F electric water heater storage type of 5 star rating , capacity of 25 ltrs with glass coated heating element to protect the heating element from oxidation and carbonization including PTMT connectios with 15 mm size with nuts and length of 50 mm with all fixing arrangement incl metal plug and socket. The geyser should be tough enough to withstand pressure upto 8 bars. The inner tank should have a minimum 7 years warranty. Make : Havells/ Jaquar / Racold.

S & F single pole and neutral enclosure with two pin and earth plug with socket complete with one single pole MCB 20A 240 volts complete all as specified and directed. Make : L&T / Havells /scheider

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm 2 core in trenches / under PCC/interlocking tiles incl making good of surface with PCC/ cementing all as as directed at site Make:- Finolex /RR kabel/ Havells

Supply laying reinforced precast concrete cable cover, class LV, type-1, flate, size 250mm x 150mm x 40mm all as specified and directed. (Make: Mahtab tiles / Alankar Tiles/Pearlers Industries/SIND Mozaic Gujrat/JJ Concrete Lucknow).

Material and labour for approved river sand cushioning for under ground cable in trenches 8 cm before laying and 15 cm after laying of cable and punned thickness of sand shall be measured and paid for 18 cm only after punned/consolidated thickness complete all as specified and directed.

Supply and laying GI pipe 'light grade' 32 mm in trenches under floors , roads, along poles for protection of cables with all necessary fittings and sealing ends complete all as specified and directed Make :- Jindal, Prakash, Surya, Tata

M&L earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground in vertical position (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to galvanised earth wire 4mm size by means of bolts, nuts, check nuts and washers of galvanised iron or steel, all as shown in electrical plate No. 3 of SSR Part -1 , connected to earthing test point and complete all as specified and directed. Note:- The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C-1 (using 20 mm grade crushed stone aggregate) earth chamber, RCC 1:1.5:3, type A-1 cover slab, 40 mm thick reinforced with 6 mm dia TMT bar @ 150 mm C/C both ways, 10 mm dia plain bar lifting handle embedded in cover slab, 20 mm bore medium grade GI watering pipe, 15 mm bore GI light grade earth lead protection pipe, funnel, wire mesh, copper lugs, charcoal and common salt in alternate layer etc.

sunway associates

M/S Ashish Construction