Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.2 LAccepted-AOC | L1 | Accepted-AOC Accept | |
| 2 | L2₹52.4 L+₹3.2 L (6.52%)Rejected-Finance | L2 | Rejected-Finance Not being L1 | |
| 3 | L3₹52.5 L+₹3.3 L (6.67%)Rejected-Finance DUDH LINE NAYAGAON VILL SHADIPUR POST SRI VIJAYA PURAM TEHSIL SOUTH ANDAMAN 744106 | SRI VIJAYA PURAM | SOUTH ANDAMAN | ANDAMAN AND NICOBAR ISLANDS | 744106 | L3 | Rejected-Finance Not being L1 | |
| 4 | L4₹54.1 L+₹4.9 L (10.0%)Rejected-Finance | L4 | Rejected-Finance Not being L1 | |
| 5 | L5₹54.1 L+₹4.9 L (10.0%)Rejected-Finance MB NO 180 MG ROAD JUNGLIGHAT PORT BLAIR 744 103 | PORT BLAIR | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L5 | Rejected-Finance Not being L1 |
| Sl No | Description | Qty | Unit | M/s Pooja Enterprises L2 | Kathir Marketing Services L4 | bansal construction L6 | SKY GROUP L1 | ANDAMAN PAINTS PVT LTD L4 | M/S SHAJAHAN BUILDERS L3 | RMS Construction L5 | Allied Trading Company L7 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer in charge | 20 | qtl | 650 ₹13,000 | 881 ₹17,620 | 600 ₹12,000 Lowest | 635 ₹12,700 | 881 ₹17,620 | 650 ₹13,000 | 910 ₹18,200 | 750 ₹15,000 |
| 2.00 | S&F Mild Steel Rolled sections as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed by Engineer in charge | 1,000 | Kg | 180 ₹1,80,000 | 251 ₹2,51,000 | 200 ₹2,00,000 | 152 ₹1,52,000 | 251 ₹2,51,000 | 170 ₹1,70,000 | 150 ₹1,50,000 Lowest | 205 ₹2,05,000 |
| 3.00 | S&F Plates (plain or chequered) channels, square cut or notched
(ordinary and counter sunk) forming holes, without any
attachment etc complete all as specified and as directed by Engineer in charge | 100 | Kg | 250 ₹25,000 | 151 ₹15,100 Lowest | 210 ₹21,000 | 188 ₹18,800 | 151 ₹15,100 Lowest | 190 ₹19,000 | 160 ₹16,000 | 225 ₹22,500 |
| 4.00 | M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed by Engineer in charge | 250 | Sqm | 80 ₹20,000 | 41 ₹10,250 Lowest | 110 ₹27,500 | 50 ₹12,500 | 41 ₹10,250 Lowest | 70 ₹17,500 | 81 ₹20,250 | 120 ₹30,000 |
| 5.00 | Dismalting of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed by Engineer in charge | 350 | Sqm | 60 ₹21,000 | 58 ₹20,300 | 40 ₹14,000 | 58 ₹20,300 | 58 ₹20,300 | 70 ₹24,500 | 35 ₹12,250 Lowest | 68 ₹23,800 |
| 6.00 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer in charge
Note: Rate inclusive of scaffolding at any height | 300 | Sqm | 210 ₹63,000 Lowest | 600 ₹1,80,000 | 1,100 ₹3,30,000 | 756 ₹2,26,800 | 600 ₹1,80,000 | 800 ₹2,40,000 | 778 ₹2,33,400 | 1,198 ₹3,59,400 |
| 7.00 | S&F Pre- painted galvalume aluminum zinc coating GI based plain sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer in charge
Note: Rate inclusive of scaffolding at any height | 50 | Sqm | 1,000 ₹50,000 | 818 ₹40,900 | 1,200 ₹60,000 | 825 ₹41,250 | 818 ₹40,900 | 950 ₹47,500 | 765 ₹38,250 Lowest | 1,155 ₹57,750 |
| 8.00 | S & F Aluminium flat , wind ties of any size fixed with self tapping screws of size 40/50mm with integral EPDM washer screwed in roof covering, including all necessary drilling, bolting or riveting etc., and similar work complete all as specified and as directed by Engineer in charge | 100 | Kg | 720 ₹72,000 | 886 ₹88,600 | 610 ₹61,000 | 875 ₹87,500 | 886 ₹88,600 | 700 ₹70,000 | 450 ₹45,000 Lowest | 698 ₹69,800 |
| 9.00 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed by Engineer in charge | 100 | Sqm | 90 ₹9,000 | 76 ₹7,600 | 40 ₹4,000 Lowest | 49 ₹4,900 | 76 ₹7,600 | 60 ₹6,000 | 44 ₹4,400 | 85 ₹8,500 |
| 10.00 | S&F for aluminium anodised snap grid false ceiling of standard aluminium section such as wall angle of size 38mm x 25mm x 2.4mm weighing 0.36 Kg/Rm main/cross tees of size 36.5mm x 25mm x 1.4mm weighing 0.24 Kg/Rm, grid size n.exc. 610 x 610mm suspended with 4mm dia GI wire at interval n.exc. 600mm centre to centre for main & cross tees fixed to roof slab roof truss fixed with suitable size MS hook and fastening bolts etc including 'Non asbestos fibrecement building boards 4mm thick oceanic sheet of size n.exc. 610 x 610mm size fixed in ceiling with clips to aluminium snap grid complete all as specified and as directed by Engineer in charge | 100 | Sqm | 1,800 ₹1,80,000 | 1,564 ₹1,56,400 | 1,830 ₹1,83,000 | 1,645 ₹1,64,500 | 1,564 ₹1,56,400 | 1,750 ₹1,75,000 | 1,000 ₹1,00,000 Lowest | 1,875 ₹1,87,500 |
Tender Value
₹47.5 L
EMD Value
₹95,000
Closing Date
4 Feb 2025, 5:45 pmClosed
GE, Minniebay, Sri Vijaya Puram
GE, Minniebay, Junglighat (PO), Sri Vijaya Puram -744103
8506- SPECIAL REPAIR FOR UPPER AIR OBSERVATORY BLDG (P-27) OF MET OFFICE AT INS UTKROSH AND SPECIAL REPAIR TO CHAIN LINK FENCING AROUND BLDG NO.P-42 AT SHAURYA VIHAR INS UTKROSH UNDER GE MINNIEBAY, SRI VIJAYA PURAM
2025_MES_693142_1
8506/E8
Open Tender
Civil Works
Item Rate
180 days
GE, Minniebay, Sri Vijaya Puram
Please refer Tender documents.
11 documents required · 11 mandatory
₹500
Yes
GE, Minniebay
₹95,000
Yes
22 Aug 2025
14 Jan 2025
5 Feb 2025
14 Jan 2025
4 Feb 2025
28 Jan 2025
Amount
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer in charge
S&F Mild Steel Rolled sections as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed by Engineer in charge
S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc complete all as specified and as directed by Engineer in charge
M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed by Engineer in charge
Dismalting of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed by Engineer in charge
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer in charge Note: Rate inclusive of scaffolding at any height
S&F Pre- painted galvalume aluminum zinc coating GI based plain sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer in charge Note: Rate inclusive of scaffolding at any height
S & F Aluminium flat , wind ties of any size fixed with self tapping screws of size 40/50mm with integral EPDM washer screwed in roof covering, including all necessary drilling, bolting or riveting etc., and similar work complete all as specified and as directed by Engineer in charge
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed by Engineer in charge
S&F for aluminium anodised snap grid false ceiling of standard aluminium section such as wall angle of size 38mm x 25mm x 2.4mm weighing 0.36 Kg/Rm main/cross tees of size 36.5mm x 25mm x 1.4mm weighing 0.24 Kg/Rm, grid size n.exc. 610 x 610mm suspended with 4mm dia GI wire at interval n.exc. 600mm centre to centre for main & cross tees fixed to roof slab roof truss fixed with suitable size MS hook and fastening bolts etc including 'Non asbestos fibrecement building boards 4mm thick oceanic sheet of size n.exc. 610 x 610mm size fixed in ceiling with clips to aluminium snap grid complete all as specified and as directed by Engineer in charge
Demolition of Precast Concrete work/ precast concreteblock built in cement mortar including all quoins arches pillars etc complete all as specified and as directed by Engineer in charge
M & L for Pre-cast cement concrete block masonry using PCC, Type C-1 solid blocks, exceeding 10 cm in width and setting in cement mortar 1:6, straight or curved on plan exceeding 6 m mean radius complete all as specified and as directed by Engineer in charge
Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key complete all as specified and as directed by Engineer in charge
M&L for rendering 10 mm thick plaster in CM (1:6) on brick/block or concrete surfaces finished even & smooth without using extra cement plaster complete all as specified and as directed by Engineer in charge
M&L for rendering 15mm thick in two layers of first layer 10mm thick in CM (1:6) and second layer 5mm thick rendering in CM (1:4) using water proofing compound (WPC will be paid separatley) on brick masonry or stone block masonry or concrete surfaces complete all as specified and as directed by Engineer in Charge.
Supply only water proofing compound complete all as specified and as directed by Engineer in Charge.
M&L for rendering 5mm thick ceiling plaster in CM (1:3) on concrete surfaces finished even & smooth (without using extra cement) complete all as specified and as directed by Engineer in charge
M&L for applying two coats of oil bound distemper over a coat of primer on newly plastered surface of wall including preparation of surface, complete all as specified and as directed by Engineer in charge
M&L for applying two coats of oil bound distemper over a coat of primer on newly plastered surface of ceiling including preparation of surface, complete all as specified and as directed by Engineer in charge
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed by Engineer in charge
M & L for complete removal of existing treatment on wall surfaces and applying two coats of oil bound distemper over a coat of chalk whiting, on plastered surfaces, preparatory to distempering complete all as specified and as directed by Engineer in charge
M&L for applying one coat of acrylic emulsion weather coat premium quality antifungal exterior emulsion on old plastered surface of wall including preparation complete all as specified and as directed by Engineer in charge
Taking down existing chowkats exc. 1.5 Sqm and n.exc. 4 Sqm each without taking off shutter from the frame complete all as specified and as directed by Engineer in charge
Taking down shutters of any description exc. 1 Sqm and n.exc. 2.00 Sqm each complete all as specified and as directed by Engineer in charge
Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 × 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 +0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 1.75 sq. m) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 $0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 × 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e., in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.]
Supply only 5.5mm thick sheet glass ordinary quality, in squares n. exc 0.5sqm each pane complete all as specified and as directed by Engineer in charge
M&L for 12mm thick Prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations, fixed with screws to aluminium frame work complete all as specified and as directed by Engineer in charge
Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed by Engineer in charge
M&L for 15mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes, complete all as specified and as directed by Engineer in charge
M&L for 10mm thick rendering in CM (1:4) on vertical surfaces as backing coat of wall tiles etc, complete all as specified and as directed by Engineer in charge
M&L for vitrified double charged coloured ceramic tiles 10 mm thick ( Square/ rectangular) area of each tiles not exc 0.36 Sqm in floors set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified and as directed by Engineer in charge
All as per item No 31 above but on dado / skirting complete all as specified and as directed by Engineer in charge
S&F glazed digital ceramic coloured tiles in vertical surfaces 300x450x7 to 8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl cutting to reqd shape and size complete all as specified and as directed by Engineer in charge
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above gd level) complete all as specified and as directed by Engineer in charge
M&L 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) on floor as sub base or roof surface to bring uniform surfaces complete all as specified and as directed by Engineer in charge
M & L For coloured chequered cement concrete tiles 30 cm x 30cm x 25 mm thick, set and jointed neat cement slurry and pointed with coloured or grey cement match with pigment, over and including 15 mm thick screed bed or bedding layer in cm 1:6 etc complete all as specified and as directed by Engineer in charge
S&F in repair 150mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches floor or wall and similar works including necessery taking any old pipe complete all as specified and as directed by Engineer in charge
All as per item No. 37 here in before but 110mm internal dia pipe complete all as specified and as directed by Engineer in charge
All as per item No. 37 here in before but 75 mm internal dia pipe complete all as specified and as directed by Engineer in charge
S&F 75mm dia PVC (SWR) bend with oval access door complete all as specified and as directed by Engineer in charge
S&F in repair 75mm dia PVC (SWR) branch piece (single Y) equal or unequal with ovel access door complete all as specified and as directed by Engineer in charge
S&F 110mm dia PVC (SWR) bend with oval access door complete all as specified and as directed by Engineer in charge
S&F in repair 110mm dia PVC (SWR) branch piece (single Y) equal or unequal with ovel access door complete all as specified and as directed by Engineer in charge
Supplying and Laying in repair CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors with outer dia 20mm including taking down complete all as specified.
`All as item no. 44 here in before but 25 mm outer dia complete all as specified and as directed by Engineer in charge
All as per item no.44 here in before but 32 mm outer dia complete all as specified and as directed by Engineer in charge
Cutting chases in concrete block walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing etc., and making good, cutting not ecx 10 cm girth complete all as specified and as directed by Engineer in charge
S&F in repairs Vitreous China wash down water closet pan of size 540x375x415mm 'P' trap or 'S' Trap (pedestal pattern), any colour including necessary fittings (excluding flushing cistern and flush pipe) complete all as specified and as directed by Engineer in charge
S&F in repairs 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, any colour , with inlet, ball valve, float and handle including brackets, and necessary connections to pipes with PVC connections 20mm size with PTMT nuts of length 600mm complete all as specified and as directed by Engineer in charge
S&F in repairs PVC water closet seat cover (any description and any colour), closed pattern and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engineer in charge
S&F in repair Waste pipe any dia (32/40mm) alongwith necessary fittings connected to wash hand basin /kitchen sink complete all as specified and as directed by Engineer in charge
S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed by Engineer in charge
S&F in repair Toilet paper holder with flat recessed type stainless steel complete all as specified and as directed by Engineer in charge
S&F in repairs Vitreous China wash basin, white, flat back, size 630x450mm fixed on MS brackets including 32 mm bore CP waste coupling complete all as specified and as directed by Engineer in charge
S&F in repair Pillar taps,heavy duty chromium plated, fancy type 15 mm dia cast copper alloy, with capstan heads, ,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed by Engineer in charge
Supply only PVC connections 15/20mm size with PTMT nuts of length 600mm complete all as specified and as directed by Engineer in charge
S&F in repair CP Towel Ring fixed with and including Chromium plated brass screws and wall plugs (Minimum weight 90gms) complete all as specified and as directed by Engineer in charge
S&F in repair 600 mm long CP Brass Towel Rail 20 mm dia fixed to wall with necessary chromium plated screws and wall plugs complete all as specified and as directed by Engineer in charge
S&F in repair brass chromium plated over head shower rose with arm 125 mm size with long body with swivel joint including fixing to CPVC/ steel pipe or union, complete all as specified and as directed by Engineer in charge
S&F in repair angular stop cock cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for pipe or union fixed for 15mm bore complete all as specified and as directed by Engineer in charge
S & F in repair bib Taps, cast copper alloy heavy duty, 15 mm dia, Chromium Plated, long body Fancy Type screwed down for iron pipe and fixed etc complete all as specified and as directed by Engineer in charge
S&F in repair two way bib tap cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for pipe or union fixed for 15mm bore complete all as specified and as directed by Engineer in charge
S&F in repair 15 mm dia Stop cock chromium plated fancy type with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe/CPVC pipe or for unions and fixed complete all as specified and as directed by Engineer in charge
S&F in repair stop valves cast copper alloy chromium plated with long shank and cup (concealed type) fancy type screwed down high pressure screwed both ends for pipe or union fixed for 15mm bore complete all as specified and as directed by Engineer in charge
S&F in repair brass Chromium plated mixer, fancy type ( concealed type) for mixing hot & cold water screwed down for iron pipe/CPVC pipe and fixed complete all as specified and as directed by Engineer in charge
S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed by Engineer in charge
S&F in repair soap dish, brass, chromium plated fixed to wall with brass chromium plated screw, complete all as specified and as directed by Engineer in charge
S&F in repair 125 mm dia CP grating incl joints with solvent cement complete all as specified and as directed by Engineer in charge
S&F in repair CP Waste coupling any 32/40 (any dia) suitable for Kitchen Sink/WHB fixed with waste pipe complete all as specified and as directed by Engineer in charge
Dismantling posts or struts(wood, steel or R.C.C.) any section, including taking out embedded portion , embedded in concrete, brickwork or masory etc and making good disturbed ground complete all as specified and as directed by Engineer in charge
Dismantling fencing wire mesh any type complete all as specified and as directed by Engineer in charge
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface in soft/loose soil complete all as specified and as directed by Engineer in charge
Excavation in trenches, n. exe 1.5 m wide and n.exc 1.5 in depth, for foundation, etc or to shafts, wells, cesepits, manholes, piers holes, ec, n.exc 10 sq.m on planand getting out in hard / dense soil complete all as specified and as directed by Engineer in charge
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soils complete all as specified and as directed by Engineer in charge
Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5m complete all as specified and as directed by Engineer in charge
M&L for PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded stone aggregate including formwork complete all as specified and as directed by Engineer in charge
S&F Fencing post including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed by Engineer in charge
S&F Framed work such as grills, gratings gates , etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed by Engineer in charge
M&L PVC coated GI chain link fencing 3.5mm dia with 50mm x 50mm mesh including fixing of MS line wire / rod, flat iron & machine made hexagonal or square head bolts to fencing posts complete all as specified and as directed by Engineer in charge (Note : MS rod,and MS bolts shall be measured and paid seperately as supplied only)
Supply only mild steel screw bolts n exc 12 mm dia machine made with hexagonal or square head at one end and screwed the other or screwed both ends for fixing of chain link fencing complete all as specified and as directed by Engineer in charge
Supply only 10 mm dia Round bars for support to chain link fencing confirming to Fe-290 (Gde E-165) complete all as specified and as directed by Engineer in charge
M&L in repair stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed by Engineer in charge
M&L rendering 15mm thick in concrete or brick surface in CM 1:4 even & smooth without using extra cement complete all as specified and as directed by Engineer in charge
M&L for applying two coats of cement based paint over a coat of chalk whitening on newly plastered surface of wall including preparation complete all as specified and as directed by Engineer in charge
S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed by Engineer in charge
Taking down carefully unserviceable copper / aluminium point wiring (light, fan, bell socket or power) including all fittings such as switches, socket, ceiling roses , regulators and fittings complete and making good the disturbed surfaces complete all as specified and as directed by Engineer in charge
M&L for point wiring with 1.5 Sqmm (nominal area), FRLSH PVC insulated, multistranded, single core, unsheathed, copper conductor cables drawn through and including PVC conduits Concealed in walls, ceiling etc with all fittings and accessories of PVC conduits (like Tee, bend etc.) complete fixed to walls/ceiling etc. with and including 1.5 Sqmm (nominal area) FRLSH PVC insulated, unsheathed, multistranded, single core, copper cable green in colour as in earth continuity wire connecting to common earth point and 1.6 mm thick mild steel sunken terminal boxes of suitable size with 3 mm thick hylam sheet top cover fixed with suitable size of brass screws for mounting switches, sockets, regulators etc complete for one light/fan/bell/buzzer point/ 3 pin 5 Amps socket outlet independent point controlled by one, one way switches complete including cutting, chasing the surface and then making good the same in CM 1:3 complete all as specified and as directed by Engineer in charge
All as per item No. 88.00 here-in-before but one 3 pin 5 amp switch socket out let independent complete all as specified and as directed by Engineer in charge
All as per item No. 88.00 here in-before but for one 3 pin 5 amps socket outlet on the same board with other switch with casing caping / PVC conduit complete 2.5 sqmm multistraded all as specified and directed by Engineer in-charge.
All as per item No. 88.00 here-in-before but using 2.5 Sqmm size stranded copper conductor cable for one 16 Amp switch 2.5 sqmm for socket outlet point on independent board complete PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed by Engineer in charge
All as per item No 88.00 here in before but with 4 Sqmm single core multi standard copper conductor for one three pin socket 20 Amps on independent board/ metal clad socket for AC point including continuous earth wire PVC insulated 4 Sqmm copper solid conductor to common earth dolly including taking down old u/s point wiring complete all as specified and as directed by Engineer in charge for the following.
S&F Switch piano flush type, single pole one way, 5 Amp complete all as specified and as directed by Engineer in charge
S&F Switch socket combination multi - purpose 3 pin, 15 amp and , 5 amp controlled by one switch flush type complete all as specified and as directed by Engineer in charge
S&F Socket outlet 5 pin, 6 Amps, 230 volt flush type complete all as specified and as directed by Engineer in charge
S & F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings after taking down old one complete all as specified and as directed by Engineer in charge
S&F Ceiling rose, PVC/Polycarbonate, 65 x 50 mm,three terminals complete all as specified and as directed by Engineer in charge
S&F ceiling fan regulator electronic Step type, solid state, , 240 volts, complete all as specified and as directed by Engineer in charge
S&F Flameproof Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and as directed by Engineer in charge
S&F Flameproof 1Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A,250V, 2P+earth complete all as specified and as directed by Engineer in charge
S&F LED light fitting mirror type withhigh out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lampincluding connecting up with three core flexiblecopper conductor cable of suitable size complete wall mounted type complete with LED tube Lamp and fitting with copper flexible PVC cable of 0.50 sq mm twin core not more than one metre in length after taking down old one complete all as specified and as directed by Engineer in charge
S&F LED lights fitting 4 feet,1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.with copper flexible PVC cable of 0.50 sq mm twin core not more than one metre in length taking down old one complete all as specified and as directed by Engineer in charge
S&F in replacement of sheet metal enclosure with socket plug top , single pole and neutral enclosure with two pin earth plug and socket complete with one MCB SP of capacity 20 to 32 Amps complete all as specified and as directed by Engineer in charge
S&F in replacement LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high.efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete..with copper flexible PVC cable of 0.50 sq mm twin core not more than one metre in length taking down old one complete all as specified and as directed by Engineer in charge
S&F in replacement Fluorescent tube light fitting. flameproof type FLP-WP of T5 1X36 W including integral reflector made of alluminium alloy LM6, with electronic ballast, bipin holders, connector block, etc., and all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor complete all as specified and as directed by Engineer in charge
S&F security light fitting LED type, 20 Watts 240 Volts luminous shall be more than 2000 lumen, efficiency not less than 100 lm/Watt, and accessories complete mounted on 25 mm dia light grade GI pipe bracket 1.0 mtr long bent to shape, mounted on wall,connection complete including taking down old unserviceable CFL/tube light security light fitting complete all as specified and as directed by Engineer in charge
Supply and fixing sub main wiring with two run of single core 6 Sqmm PVC insulated unsheathed stranded cable copper conductor drawn through PVC conduit not less than 25 mm dia with all fittings including 6 sq mm PVC insulated unsheathed single core copper conductor as earth wire and including PVC conduit complete all as specified and as directed by Engineer in charge Note : (i) Two run of single core cable 6 sq mm and one run earth wire 6 sq mm will be measured as one length.
Supply and fixing sub main wiring with two run of single core 4 Sqmm PVC insulated unsheathed stranded cable copper conductor drawn through PVC casing caping with all fittings including 4 sq mm PVC insulated unsheathed single core copper conductor as earth wire and including PVC casing caping complete all as specified and as directed by Engineer in charge Note : (i) Two run of single core cable 4 sq mm and one run earth wire 4.0 sq mm will be measured as one length.
Taking down unserviceable rusted / damaged MCB DBs of any type and way along with any type MCB and keeping serviceable MCB in safe custody in re-use in the work and making good to the distubed surfaces of walls etc complete all as specified and as directed by Engineer in charge
Supply and fixing MCB SPN DB made up with sheet metal double door, phosphorised, power coated, neutral link, earth bar and din rail,12 way with 200 amps rated bus bar, 240 volts complete all as specified and as directed by Engineer in charge
Supply and fixing MCB 6 to 32 Amps, SP, 240 Volts ,B- Curve breaking capacity 10 KA complete all as specified and as directed by Engineer in charge
Supply and fixing MCB 6 to 32 Amps, DP 240 Volts ,B- Curve breaking capacity 10 KA complete all as specified and as directed by Engineer in charge
Supply and fixing MCB TPN DB made up with sheet metal, phosphorised, power coated, neutral link, earth bar and din rail, 4 way TPN with 200 amps rated bus bar, 240 volts complete all as specified and as directed by Engineer in charge
Supply and fixing TP 63 Amps, 415 Volts , MCB 'B- Curve breaking capacity 10 KA complete all as specified and as directed by Engineer in charge
Cutting the existing required on brick wall in square/round type suitable for fixing Exhaust fan including cement work grouting 4 Nos long bolts nuts washers and making good to disturbed surface with cement mortar 1:3 and distemper / colour wash etc to match with existing surfaces including facing / finishing complete all as specified and as directed by Engineer in charge
Supply & Fixing Exhaust fan AC single phase 240 V of size 450 mm sweep with louvre specially designed by kitchen in domestic ventilation.plastic body and blade, finish high quality engineering plastic heavy duty motor, protective bird guard complete all as specified and as directed by Engineer in charge
Supply & Fixing Ceiling fan AC single phase 240 V of size 1400 mm sweep metal body and blade, powder coated metallic finish complete all as specified and as directed by Engineer in charge
Materials and labour in repair for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.00 mm thick burried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI strip 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of GI or steel, GI strip proected by 40 mm bore light grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron, wire mesh, charcoal or coke common salt laid in alternative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1, 50 mm thick pre-cast RCC (1:2:4) type B-1 normal mix cover slab reinforced with 8 mm dia TMT bar 10 cm c/c bothways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft / loose soil and disposal pf soil to a distance n. exc. 50 m and necessary testing on completion all as shown in electrical plate No. 3 MES Schedule Part-I complete all as specified and as directed by Engineer in charge
Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation, etc and getting out in soft/loose soil for layiing of wter supply pipe line/UG cable complete all as specified and as directed by Engineer in charge
Materials and Labour Cutting /boring of existing road / path , hardstanding for taking out cable and water pipe to protection with iron cover plate for passing cable,water pipe and making good the disturbed road top surfaces with cement concrete all type, using of suitable depth and finished with speed breaker complete all as specified and as directed by Engineer in charge
Supply & laying in replacement Telerex DWC (Double Wall Corrugated) HDPE pipe ISI marked of outer dia of 50 mm and inner dia 38 mm polyethylene including couplers, bends, cap etc., with smooth internal and profiled external surface for non pressure under ground cable complete all as specified and as directed by Engineer in charge
Taking out unserviceable UG cables of any type and any sizes from trenches etc and removing from the site of work complete all as specified and as directed by Engineer in charge Note:- (i) Serviceable bricks obtained shall be stacked properly for re-use. (ii) Excavation and earth work shall be measured and paid separately under relevant item of these schedule.
Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 120 Sqmm 3.5 core in duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as specified and as directed by Engineer in charge
Supply and laying GI pipe light grade with all fittings in trenches 80 mm bore of GI pipe complete all as specified and as directed by Engineer in charge
Supply and fix MCCB 4 pole 250A, 36KA, 415V thermal and magnetic release adjustable type including making all fixing arrangement, cutting welding of existing panel board as per site requirment and painting the disturbed part of panel as per the existing colour of the panel and electric connection including taking down old onecomplete all as specified and as directed by Engineer in charge
M/s Pooja Enterprises (BID ID -3230707)
M/S SHAJAHAN BUILDERS (BID ID -3230787)
ANDAMAN PAINTS PVT LTD (BID ID -3231453)
Kathir Marketing Services (BID ID -3231033)
RMS Construction (BID ID -3231418)
bansal construction (BID ID -3231090)
Allied Trading Company (BID ID -3231120)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .