Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.9 CrAccepted-Finance OPP DAGA HOSPITAL GANDHIBAGH NAGPUR 440002 INDIA | NAGPUR | MAHARASHTRA | 440002 | ₹3.9 Cr | L1 | Accepted-Finance OK |
| 2 | L2₹4.1 CrAccepted-Finance | ₹4.1 Cr | L2 | Accepted-Finance OK |
| 3 | Rejected-Technical | - | - | Rejected-Technical Tender documents not found ok |
| 4 | Rejected-Technical | - | - | Rejected-Technical Tender documents not found OK |
| 5 | Rejected-Technical | - | - | Rejected-Technical Tender documents not found OK |
Updated dates
Tender Value
Refer Docs
EMD Value
₹2.0 L
Closing Date
30 Dec 2025, 3:00 pmClosed
Executive Engineer (Electrical)
Civil Lines, Nagpur
Beautification of Sonegaon Lake with aesthetic lighting along with Electrical other allied works
2025_NMCN_1260156_1
841-2025/Electrical
Open Tender
Electrical Works
120 days
Civil Lines
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,360
₹2.0 L
4th floor New Administrative Building NMC, Civil L
20 Feb 2026
15 Dec 2025
17 Jan 2026
15 Dec 2025
30 Dec 2025
15 Dec 2025
17 Dec 2025
Façade / Landscape Lighting Bill of Quantities SITC of BIS-approved RGBW (W = 3000K / 4000K) IP67 rated Linear Wall Washer Light of 24W–25W: The luminaire shall be a high-performance, outdoor-rated Linear Wall Washer Light with a power rating of 24W–25W, constructed using highly thermal-efficient extruded aluminium housing with die-cast aluminium end caps. The fixture shall be provided with clear toughened glass having an impact resistance of IK07. The luminaire shall deliver a minimum of 1250 lumens with an efficacy of >50 lm/W at luminaire level when all LEDs are in ON condition. The optical system shall comprise Narrow / Medium / Wide / Elliptical beam angle lenses made of VDE/UL-approved, UV-resistant, non-yellowing silicon material. The product shall be integrated with an in-built 8-bit / 16-bit DMX-512 based decoder or equivalent data-processing device, housed within the luminaire maintaining the same IP rating. The fixture shall be subjected to and pass corrosion and rust-resistance testing suitable for marine / high-humidity environmental applications for a minimum duration of 500 hours. The luminaire shall operate on DC 24V and be compatible with 240V AC input through an external/remote LED driver. A BIS-approved IP65/IP67-rated constant-voltage power supply shall be provided. The electrical safety rating of the product shall be Class III. The fixture shall be equipped with industrial-grade, moulded, locked-type IP67 connectors for DC power supply. LEDs shall be sourced from reputed manufacturers such as CREE / OSRAM / NICHIA. The bidder/OEM must submit all relevant LM-80 reports, BIS certifications, and third-party NABL-accredited LM-79 test reports at the time of tender submission, which is mandatory. LEDs shall have an LM-80 declaration of >50,000 hours at 85°C. The luminaire shall operate reliably within an ambient temperature range of –10°C to +50°C and shall be supplied with a minimum 5-year warranty. The product shall comply with IS/IEC 60529; IS 10322 (Part 5/Sec 5):2013 + A1:2018 read with IS 10322 (Part 1):2014; IEC 60068-2-11:2021; IEC 62262:2002; and LM-79/LM-80 standards.
Supply, of IP67 Power Supply 24V output. Power consumption-200W. The Driver should be of same make as the fixtures and should be BIS approved. All necessary certificates should be provided at time of Tender submission, which is mandatory.The product should have a minimum 5-year warranty.
Supply, of Signal Booster/Splitter with 8Way output for spreading and amplyfing the DMX Data signals in multiple directions, Input-220-240V AC. All necessary certificates should be provided at time of Tender submission only, which is mandatory. The splitter should be of same make as the fixtures and should be BIS approved.The product should have a minimum 5-year warranty.
Supply, of DMX Special Cable (single pair) having one 22AWG pair stranded (7x30) tinned copper conductors, Datalene (FHDPE) insulation, twisted pairs, overall Beldfoil shield (100% coverage) plus tinned copper braid, PVC jacketCable. Prefered make Beldon or equivalent as approved by Consultant & Engineer in Charge.
Supply, of Enclosure for Power Supply, Splitter, DMX Controller : Size 450 x 300 x 250 mm, plain sides, grey cover, Degree of protection: IP 66/ IP 67, Impact strenght: IK 08, Material, base: Fiberglass reinforced polycarbonate, Material, cover: Polycarbonate, Material, cover screws: Polyamide, Material, gasket: Polyurethane.
Programming, Testing, Troubleshooting and synchronization of DMX control system.The addressing of minimum 100 nos. fixtures with the multiple scenes(atleast 20Themes) as per instruction of engineer in charge. The work to be done by the OEM representative of the luminaries supplied only. Third party not allowed. OEM must mention details as required above in self attested letter at the time of Tender submission only.
Supply of IP68 T Connector 3 PIN suitable 2.5sqmm flexible cable as per IS/IEC 60529: 2001 (IP68). The product must be Tested in NABL LAB with instruments used are maintained in accordance of IS/ISO/IEC 17025. NABL certificates should be provided at time of Tender submission.
Supply of IP68 T Connector 4 PIN suitable 2.5sqmm flexible cable as per IS/IEC 60529: 2001 (IP68). The product must be Tested in NABL LAB with instruments used are maintained in accordance of IS/ISO/IEC 17025. NABL certificates should be provided at time of Tender submission.
Supply of IP68 T Connector 5 PIN suitable 2.5sqmm flexible cable as per IS/IEC 60529: 2001 (IP68). The product must be Tested in NABL LAB with instruments used are maintained in accordance of IS/ISO/IEC 17025. NABL certificates should be provided at time of Tender submission.
SITC of LED IK10 30W Luminaire & decorative ornamental 3 meter height Pole (Above ground level till Luminaire Bottom), made up of two sections ,bottom section shall be made up of 114 mm diameter & 3mm thickness, GI pipe of 1000 mm height, top section of 76 OD diameter & 3mm thickness GI Plain / Ribbed pipe, 2000 mm height and base plate shall be made up of MS plate .The pole is designed to mount post top or post top side mounting fixture with 76 ID pipe ,the pipe shall be made by ERW pipes confirming to IS 1161 /IS 1239 All plates confirming to A36/A572-50 IS: 2062 or equivalent, the pole shall be PU paint of graphite grey color, shall have 3 layer coating of Minimum DFT level is 60 Microns. 1st layer with etch primer, 2nd layer with epoxy primer & 3rd final layer with PU paint, a suitable service window shall be provided in the base of pole to allow access to electrical Connections and terminations, Pole unit can be grouted using 4 nos. anchor J-bolts of size M16 x 250 mm long confirming to EN 8 Gr. Pole should be from same company of decorative luminaire for proper installation at site. Decorative pole to be Supplied with LED Decorative IK10 Luminaire, Supply of BIS Certified (as per IS10322 Part 5/ Sec 3) 30W LED Post top Luminaire. The Heat Sink of Post top should be made of Pressure Die Cast Aluminum (Grade – ADC 12) in single pc (Not in extruded fins aluminum housing or module form or spun Housing). Heat sink should fin design for better thermal management. The Optical cover should be made of Clear polycarbonate (Virgin PC), product should be IK10 rating & IP66 with complete optical part of product. To ensure any chance of Ingress breach, the fully sealed LED compartment remains intact at the time of maintenance or service of LED driver or SPD. Product should be painted with UV protected pure polyester powder coated Grey colour after phosphochromate treatment. The lower base of the Light Fixture is also made up of Pressure Die Cast Aluminum (Grade – ADC 12) in single pc. Product should be equipped with LED with make Osram, Cree, Nichia, Color Rendering Index (CRI) >70 and L70 rated lifetime of 50,000 hours. System Lumen Efficacy of 100 Lumens/watt in 4000K with symmetrical light distribution. Mounting on pole with outer Dia 60 mm. Electrical Class I, System Power 30W, rated voltage 240VAC, Power Factor ≥ 0.95, offered with BIS certified potted driver having Internal surge protection of 4/4kV (in both Common & Differential Modes), Led Driver efficiency should be > 85% and an additional/external Surge Protection Device (SPD) of 10/10kV (in both Common & Differential Modes). Product and Led driver should be connected with detachable male -female connector. The product should have a minimum 5-year warranty. Product must be comply with IEC 62262: 2002, IS/IEC 60529, IS 10322 (Part 5/ Sec 5):2013+A1:2018 in conjunction with IS 10322(Part-1):2014 & LM 79/80.
Electrical Wires & Cables Supplying, erecting, testing and commissioning of 60 kVA pure sine wave UPS without backup. UPS will be 3PH I/P & 3PH O/P with Isolation Transformer. UPS will have THD <3% at 100% Load, o/p PF of 0.9 or above, overload capacity of 110% for 60 Mins, 125% for 10 Mins, 150% for 1 Min.
Supplying, erecting & marking TPMCB 40A to 63A, wi
th rated short- circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/ 4 pole MCCB as incomer & outgoing SP MCB (12 poles) or TP MCB of 4 ways (12 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1
Providing & erecting 4 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB
Supplying and erecting SS enclosure for MCCB suitable for up to 100A MCCB.
Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.
Supplying and erecting LT CT multifunction DLMS compliance energy meter of accuracy of class 0.5 , 3x240V,50 Hz with optical & RS 232 port, backlit LCD, measure & display trivector energy, load survey, TOD, tamper detection & logging, power ON /OFF events, instantaneous parameters of rating 1/5 A with display in absence of power complete with zero adjustment & test certificate from manufacturer erected on provided M.S. box and connected to CTs
Supplying, installation & marking of surge arrestor / surge protection device at the main distribution board after the incoming breaker of type 1+2 tested for Imax 100 kA for three phase and neutral with compliance to IEC 61643-11 as per specification no. CP-SPD
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 50 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3.5 core 70 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.
Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.
Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI
Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP.
Information & Communications Technology (ICT) Solutions Supplying and installing cat-6 cable with rodent proof and anti termite jacket suitable for networking as per specification No. WG-COC/NC
Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP
Supplying and installing Horz. Cable Manager-1U PVC Slotted Duct - Channel On Front for managing Cat6 Patch Cords patched between 24 port Cat6 Patch Panel & Switch
Supplying and fixing 1 m UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC
Supplying and fixing 2 m UTP patch cord of cat 6 type in position as per specification No. WG-COC/PC
Supplying and fixing tool-less IO (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO
Supplying and installing 86 x 86 mm, Single Faceplate Accepts one Keystone Jack to install Cat6 Information Outlet at the user/furniture end of the cable
Supplying and installing 86 x 86 x 36.7mm Back Box for Single and Dual Faceplate to house the Faceplate & Keystone Jack installation & termination within flush or surface mount style
Supplying and installing Customised Printed Ferule - Material PVC, Size 2.5mm-6mm-10mm, Color Yellow, White as per cable numbering scheme requirement - to be installed on both ends of Cat6 cables for identification
Supplying and installing Customised Printed Lable - Material PVC, Size 2.5mm-6mm-10mm, Color Yellow, White as per cable numbering scheme requirement - to be installed on Faceplate for the identificaiton of Cat6 cable port number
Supplying and installing 86 x 86 x 36.7mm Back Box for Single and Dual Faceplate to house the Faceplate & Keystone Jack installation & termination within flush or surface mount style
Supplying and installing Customised Printed Ferule - Material PVC, Size 2.5mm-6mm-10mm, Color Yellow, White as per cable numbering scheme requirement - to be installed on both ends of Cat6 cables for identification
Supplying, installing and testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC.
Supplying and fixing 1 x 12 duplex adapter panel - SC complete (Consider LC)
Supplying and fixing 12 ports light guide unloaded interconnect unit, rack mounted type, with adapter panel for termination of optical fibre cables in provided U rack complete as per specification no. WG-NAS/ LIU
1.2 Single Mode Optical Fiber Cabling Supplying and installing armoured single mode optical fibre cable with 6 fiber, core dia 50/125μm (OS1/OS2) 10/40 GBPS speed in provided underground HDPE pipe complete.
Supplying and fixing 6 Port Adaptor Blank Plate to cover the unterminated slots of the fiber LIU panel
Supplying and fixing SC/LC type multimode duplex adapter to couple two connectors between OFC & Fibre switch/Fibre module as per specification no. WG-NAS/MMA
Supplying and installing single mode simplex pigtail with SC/LC splicing complete.
Supplying and installing 3 m fibre patch cord duplex single mode for OS1/OS2 complete.
Supplying, installing, configuring and testing - Core Switch for connecting all the hub racks in the campus and provide 2 x 1GBPS fiber connectivity per hub location 20 x SFP ports 4 x Combo 10/100/1000BASE-T/SFP ports 4 x 10G SFP+ ports6 kV surge protection on all RJ-45 access portsSwitch Resource Management (SRM) for flexible management of system resources Redundant Power Supply (RPS) support MPLS L2VPM/L3 VPN supportFull L3 routing protocol support inclu
ding OSPF, BGP, and ISIS for IPv4/IPv6 SDN-enabled switch, compatible with Openflow 1.3
Supplying, installing, configuring and testing - Stacking Cable with 1M (40”) 10G Direct Attach Cable for Data/Stacking to stack 2 x core switches with each other
Supplying, installing, configuring and testing - Stacking Cable with 3M (120”) 10G Direct Attach Cable for Data/Stacking - to connect local access switches to both the core switch
Supplying, fixing, and configuring 1-port mini-GBIC SX MM fibre transceiver (up to 550m, support 3.3V power) erected in provided rack complete. 1000Base-LX Single-Mode, 10KM SFP Transceiver
Access - Switching Supplying, installing, configuring and testing - Access Switches with 8 Port PoE + Gigabit Rugged Switch 8 10/100/1000Base-T PoE/ PoE+ ports & 2 Combo 10/100/1000 base-T/SFP ports Layer 2+ switch. Operating Temperature -40 to 75 deg C to connect horizontal Cat6 cabling terminated within each wall mount network rack
Supplying, installing, configuring and testing - Meanwell 240W Single Output Industrial DIN RAIL Power Supply to provide power to the access switches
Supplying, installing, configuring and testing - AC Power Cord and DC to DC Cables and DIN Rail Panel to connect access switches power supply to the power sockets
Supplying, installing, configuring and testing - Stacking Cable with 1M (40”) 10G Direct Attach Cable for Data/Stacking to connect multiple switches with each other on every network hub location
Supplying, fixing, and configuring 1-port mini-GBIC SX MM fibre transceiver(up to 550m, support 3.3V power) erected in provided rack complete.1000Base-LX Single-Mode, 10KM SFP Transceiver
3. IP Surveillance - Solution Supply, installation, testing & commissioning Supply, installation, testing & commissioning of - 5MP IR Bullet Camera (2.8mm Lens with Aperture of F1.6 (By Default) / F2.0 (On demand)) 1/2.8” SONY - CMOS (STARVIS Series) 5MP, 0Lux with IR LED on, 2.8mm M12 lens/F 1.6 Horizontal Field of View: 107 degrees and IR Range of up to 50 meters, Video Analytics: Trip Wire, Intrusion Detection and Motion Detection, H.265/H.264/M-JPEG Video Compression PoE Support, NAS Storage, SD Card(512GB), Quad Stream Support True WDR, 3D Noise Reduction, Adaptive Streaming, Smart Streaming and ROI, SNR > 70 dB BIS, CE, FCC, RoHS, IK10, IP67, UL, NEMA 4X.
Supply, installation, testing & commissioning Supply, installation, testing & commissioning of - MATRIX MAKE SATATYA NVR3204X 32 Channel NVR with 4K Support and 4 HDD Slots • 32 IP Channel Inputs; HDMI, 1/1 Audio I/O and 2/1 Alarm I/O • 12MP, 8MP, 5MP, 4MP, 3MP, 2MP, 720p, D1 and CIF Recording Resolution • 4x 4K/ 10x 3MP/16x 1080p Local Decoding • 4 SATA HDD Support (Maximum 10TB Capacity per Slot, Hard Disk Not Included) • Save Storage Space with Adaptive Recording and Camera-wise Recording Retention • SMS & Email Notification, Video Pop-up, Alarms and Calling from Mobile Application • 512Mbps Throughput - 256 Uplink, 256 Downlink • Cascading: Create Multiple NVR Clusters to Monitor and Control Multiple Matrix NVRs Centrally ONVIF and Major Camera Brands Support
Supply, installation, testing & commissioning 4TB Surveillance Hard Drive Form Factor 3.5 inches, Item Height 1.03 Inches, Item Width 4 Inches, Product Dimensions 14.7 x 10.16 x 2.61 cm; 648.64 Grams, RAM Size 128 MB, Hard Drive Size 4 TB, Hard Drive Interface Serial ATA-600, Hard Disk Rotational Speed 5400 RPM, Number of USB 2.0 Ports 1, Hardware Platform Unix, PC, Mac,
Supply, installation, testing & commissioning of 43" LED TV 108 cm (43 inches) Full HD Smart LED TV Resolution: Full HD (1920x1080) | Refresh Rate: 50 hertz Connectivity: 3 HDMI ports to connect set top box, Blu Ray players, gaming console | 2 USB ports to connect hard drives and other USB devices Sound : 20 Watts Output | Wireless sound (2 way Bluetooth) Smart TV Features : AI ThinQ | Magic remote |One touch access to Netflix and amazon prime | Miracast (screen sharing) | AI launcherDisplay : Active HDR | HDR dynamic tone mapping | DTS virtual: X
Supply, installation, testing & commissioning of HDMI Cable 10 meter 8K HDMI 2.1 Cable 48Gbps 9.80FT/ Ultra High Speed HDMI Braided Cord-4K@120Hz 8K@60Hz, DTS:X, HDCP 2.2 & 2.3, HDR 10 Compatible with Roku TV/PS5/HDTV/Blu-ray
8. Network Housing - Solution Supplying and fixing 9U IP66 outdoor mount server rack with pole mount bracket (Dimension- DxWxH - 500x600x450 mm) as per specification No. WGNAS/ RAK
Supplying and fixing Power Distribution Unit for networking rack comprises of 6/16A (6 Nos. sockets), 25 A modular MCB, appropriate rating fuse and indicator lamp, enclosed in black powder coated metal with necessary arrangement for fixing as per specification No. WG-NAS/RAK
9. Raceways & Trunking - Solution Supplying and erecting 25 mm dia. corrugated flexible polypropylene conduit
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.
Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With PVC accessories on wall /ceiling as per specification No: WG-MA/CON.
Providing & erecting hot dipped galvanised perforated type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 150 mm width & 50 mm height complete with necessary hardware.
Providing & erecting hot dipped galvanised cover suitable for perforated type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 150 mm width & 20 mm height complete with necessary hardware.
10. Electricals - Solutions Supplying and erecting modular safety power strip with one modular switch 16A and three sockets each 13A combination with overload and surge protection unit on double mounting plate, duly erected complete.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.46 MB
TenderDOC841.pdf
Tender Documents • 1.56 MB
ResoNo77.pdf
Additional Documents • 0.98 MB
BOQ_2171702.xls
BOQ • 0.58 MB
Download all tender documents and submit your bid