Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.0 LAdmitted-Finance | ₹3.0 L | L1 | Admitted-Finance |
| 2 | Rejected-Technical 2ND FLOOR KALOOR BUSSTAND COMPLEX BUS STAND COMPLEX KALOOR BUSSTAND COMPLEX ERNAKULAM KERALA 682017 | ERNAKULAM | KERALA | 682017 | - | - | Rejected-Technical Not fulfilling the NIeQ condition. |
| Sl No | Description | Qty | Unit | M/s Premier Engineering Works L1 |
|---|---|---|---|---|
| 1.00 | Model-BHM 28/1 STG
Pump Sl. No.1530-183002,
O/A No. 117120069/1,
Total head 10.00 M,
Size - 200 mm,
Rated flow - 59.70 lit/sec,
Pump input - 7.54 KW,
Speed - 950 RPM,
Prime mover rating - 11 KW
Dismantling the above specification of the Auxiliary dewatering pump (entire unit) for attending repair work including disconnecting and removal of motor, column pipe, impeller shaft, transmission shaft, intermediate shaft, head shaft, motor stool, impeller, bearing spiders etc., complete. Removing the wornout bushes, shaft, sleeves from the pump shafts if any for conducting inspection of wornout spares of entire unit, including all labour charges, minor tools, GST etc., Complete. | 1 | Job | 1,15,000 ₹1,15,000 Lowest |
| 2.00 | Assembling the auxiliary dewatering pump after fixing the sleeves to the shaft, fixing the bushes to the bearing spiders, fixing the CI bush to the housing, fixing the check nut to the shaft and replacing the damaged column pipe 1st from bottom side, thereafter assembling the pump including replacement of required spares, the bottom suction strainer, bell mouth, pump bowl column pipe, column pipes, impeller, impeller shaft, transmission shaft, head shaft, bearing spiders, after fixing the 'O' ring & keys in proper places as per the original alignment. Re-fixing the Pump base, motor stool, coupling with motor, after cleaning all the parts with wire brush/chipping/buffing and painting with one coat of marine quality red-oxide primer, followed by two coat of marine quality paint including and trial run & testing the pump operation etc., complete as per direction of EIC., including cost of all labour charges minor tools, GST etc., but excluding cost of spares required will be supplied by the department on free of cost. | 1 | Job | 1,80,000 ₹1,80,000 Lowest |
Tender Value
Refer Docs
EMD Value
₹10,000
Closing Date
3 Aug 2026, 3:00 pmClosed
Executive Engineer (CSWD), ALHW
Executive Engineer (CSWD), Andaman Lakshadweep Harbour Works, Sri Vijaya Puram - 744101
Attending special repairs to Auxiliary dewatering pump (Make Kirloskar Brothers Ltd., Model -BHR 28 single stage (Pump SI. No. 1530-183002) at Dry Dock-II
2026_ALHW_918777_1
ALHW/DCEM/TECH(Q146)/1/2026 (e-3236) Dated 22-07-2026
Open Tender
Machineries/ Mechanical Engg Items
Works
150 days
Dry Dock-II, ALHW, Sri Vijaya Puram
Please refer Tender documents.
5 documents required · 5 mandatory
₹0
₹10,000
25 Aug 2026
23 Jul 2026
4 Aug 2026
23 Jul 2026
3 Aug 2026
23 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Model-BHM 28/1 STG
Pump Sl. No.1530-183002,
O/A No. 117120069/1,
Total head 10.00 M,
Size - 200 mm,
Rated flow - 59.70 lit/sec,
Pump input - 7.54 KW,
Speed - 950 RPM,
Prime mover rating - 11 KW
Dismantling the above specification of the Auxiliary dewatering pump (entire unit) for attending repair work including disconnecting and removal of motor, column pipe, impeller shaft, transmission shaft, intermediate shaft, head shaft, motor stool, impeller, bearing spiders etc., complete. Removing the wornout bushes, shaft, sleeves from the pump shafts if any for conducting inspection of wornout spares of entire unit, including all labour charges, minor tools, GST etc., Complete. | 1 | Job | - | - |
| 2 | Assembling the auxiliary dewatering pump after fixing the sleeves to the shaft, fixing the bushes to the bearing spiders, fixing the CI bush to the housing, fixing the check nut to the shaft and replacing the damaged column pipe 1st from bottom side, thereafter assembling the pump including replacement of required spares, the bottom suction strainer, bell mouth, pump bowl column pipe, column pipes, impeller, impeller shaft, transmission shaft, head shaft, bearing spiders, after fixing the 'O' ring & keys in proper places as per the original alignment. Re-fixing the Pump base, motor stool, coupling with motor, after cleaning all the parts with wire brush/chipping/buffing and painting with one coat of marine quality red-oxide primer, followed by two coat of marine quality paint including and trial run & testing the pump operation etc., complete as per direction of EIC., including cost of all labour charges minor tools, GST etc., but excluding cost of spares required will be supplied by the department on free of cost. | 1 | Job | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 4.58 MB
BOQ_965535.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .