13/NIET/EE/POWER/KEED/GTA of 2025-26

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. fittings etc. to light/fan/call bell point with Modular type switch (Brand approved by EIC) fixed on Modular GI / PVC switch board with top cover plate on wall incl. mending good damages to original finish. [PVC casing capping and Switch board both on surface]

b) Average run 6 mtr

c) Average run 8 mtr

(a) On Board

(d) Average Run 3 mtr.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

(c) 2 x 56/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm)

(d) 2 x 56/0.3 (4 sqmm) + 1 x 22/0.3 (1.5 sqmm)

Supplying and fixing PVC casing-capping [Precision Make] on wall or ceiling, incl. necy. PVC fittings etc. and mending good damages to building works

(b) 25x10 mmSize

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

(i) 2.5 sqmm

(ii) 4 sqmm

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.

Legrand Make 2+8 way

Legrand Make 6-32A SP

Legrand Make 40A DP

Supply & fixing sheet steel main switches on angle frame on wall 32A 240V (Havells Make)

Fixing only single/twin fluorescent light fitting complete with all accessories directly on wall/ceiling by screws etc.

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling.

Fixing only bulk head ceiling fitting on wall/ceiling by screws etc.

Fixing only Floodlight fittings on top of masonary structure by 3 Nos. 10 mm dia x 87 mm long rag bolts, nuts & double washers complete either 37 mm x 10 mm MS flat support/or by other means as required

Fixing only cabin fan on wall/ceiling by S&F rag bolt, nuts & washer (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Earthing with copper plate (610mmX610mmX3mm) thick size having weight of 9.84kg & 1 no. 25X5mm copper strip (3.2mtrs.) long & 1 no. 6 sq.mm . PVC insulated stranded copper wire (4 mtrs. Long) including 15mm dia. G.I. pipe protection (4 mtrs. Long) to be filled with bitumen, partly under the ground level partly above the ground level to an average depth of 3.65 mtrs. below the ground level and restoring the surface duly rammed including providing 3 mtrs. 25mm dia. G.I. pipe (ISI medium) for periodic treatment including masonary enclosure on top of the earth electrode of overall size 86.36X86.36X46cm deep (below ground level) complete with cemented brick work (1:6) of 25cm width, duly plastered with morter (inside) C.I. hinged inspection cover of size 36.56X36.56 cm with locking arrangement, GI reducer and treatment of soil by using salt and charcoal or coke for earth electrode.(b) For Moorum Soil

Connecting the equipments to earth busbar including supplying and fixing 20 mm X 3 mm galvanised (hot dip) MS flat on walll/ floor with gi saddles as required and connections to equipments incl. drilling holes, with bolts, nuts, washers etc.

Supplying & fixing 50mm dia x 5.24 metre long (incl. bends) GI pipe vertical type service bracket on wall for carrying 2 wires and an earth wire complete with Galv. MS clamps for stay, insulators and earth wire, 7/14 SWG stranded GI (Hot Dip) Stay wire with 230x31 mm dia straining screws, 75x88 mm porcelain shackle insulators with Galv. (Hot Dip) strips, bolts, bush etc. incl. painting

Supply only 20W LED Tube Light (Make - Havells/Philips)

Supply only 18W LED recess light (Make - Havells/Philips)

Supply only 9W LED Bulb (Make - Havells/Philips)

Supply only 30W LED flood light (Make - Havells/Philips)

Supply only decorative wall lamp (Make - Havells/Philips)

Supply only 50W LED street light (Make - Havells/Philips)

Supply only bulkhead light of ((Make - Havells/Philips)

Supply only Ventilating fan (Havells - Ventil Air DX HS white)

Supply only 300mm Exhaust fan (Havells - Ventil Ari DS Green 300mm)

Supply only wall fan (Havells make - 450 mm Tornado - Wall II)

Supply only 2 core 16 sqmm aluminium unarmoured cable

Supply only chandilier (Jaguar modle-KCH-CHR-MD150330026A)

Solar Street Light

24W Semi Integrated Solar Street light , LED Type: 24Watt Solar LED Street ligth in Aluminium housing with IP66 Protection & Dusk to Dawn Switching; inbuilt charger controller and over charging protection with inbuilt LiFeOO4 Battery (Minium Life of 2100 Cycles) With 100Wp Solar PV Module with RFID Tag backup of Atleast 3 Days Make : Solarize 2 years warranty, 25 years performance warranty

Hot Dip Galvanised swaged type steel tubular Pole 7.0 mtr. long, Bottom - 4M, Middle - 1.5M, Top - 1.5M & approx weight of pole should be 62 Kg. Make- J.K. Poles & Pipes CO./ Valmont/ Skipper.

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly a) Upto 9 mtr. S.T. Pole ( 06.X0.6X1.70)Mts.

Fixing only Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure

WBSEDCL FORMALITIES

Add Labour Cess 1%