SPL REPAIRS OF BATHROOM OF BLDG NO. NP-44 (CLK PL), NP-45 (ADM PL), NP-43 (DSC PL) AND NP-46 (MT PL) UNDER GE (NORTH) UDHAMPUR

Amount

Dismantling floor, hearth or wall tiles including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for 7-8mm thick non skid coloured ceramic tiles, area of each tile exc. 0.11 Sqm but not exc 0.18 Sqm, laid in floor and skirtings, laid/ fixed over and including 15mm thick screed bed or bedding layer in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 350mm x 250mm x 7mm or 450mm x 350/300mm x 7mm thick, fixed on verticle surfaces, skirtings/ dados etc. over and including 10mm thick plaster/ backing coat in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed.

M&L for 18-20mm thick prepolished granite stone (single piece) work (protruding chamfered/ rounded edges in threads table rubbed and polished), as in steps, jambs, pillars, window cills, cooking plateforms and the like, bedded and jointed with grey cement slurry and pointing in white cement (1:2) with using marble dust and admixture of pigment to match with shade of granite, fixed/ laid over and including 20mm thick screed bed/ plaster in CM 1:4, complete all as specified and directed.

Rounding/ moulding to edges (half round) of granite/ kota stone slabs including rubbing and polishing, complete all as specified and directed.

Taking down cement plaster on brick walls, stone masonry/ walls, concrete surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces including in patches with and including using water proofing compound, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 5mm thick rendering in CM 1:3 as on ceiling, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 50mm thick PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in plinth protection, laid in panels not exc 2.0 Mtr long with slope in 1:3, finished the surface even and smooth without using extra cement, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames), area not exceeding 1.50 Sqm each including cutting holes for taking out hold fasts or dismantling brick work or cut holes for taking out hold fasts and making good disturbed surface to match with existing surface, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames), area exc 1.50 Sqm but not exc 4.0 Sqm each including cutting holes for taking out hold fasts or dismantling brick work or cut holes for taking out hold fasts and making good disturbed surface to match with existing surface, complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts with bright finish, complete all as specified and directed.

S&F 100mm long extruded aluminium alloy handles, cast type, anodised, oval shape, complete all as specified and directed.

S&F in replacement vitreous china wash down water closet pan `P` or `S` trap (pedestal pattern) white including fixing bolts and including connection to 'P' or 'S' trap etc. and drain pipe (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc, complete all as specified and directed.

S&F in replacement vitreous china squatting pan ‘Orissa’ pattern of size 580x440mm, white in colour with integral foot rest (excluding flushing system and flush pipe) with ‘P’ or ‘S’ trap and connection to trap, flush pipe etc including plain cement concrete, complete all as specified and directed.

S&F in replacement PVC low level flushing cistern of 10 ltrs capacity with top push button includingPVC bend long type and connecting to flush pipe of any size and pattern with inlet ball valve float, handle and 15mm bore PVC connection pipe of 450mm long, complete all as specified and directed.

Demolition of brick work or stone boulder masonry, built in cement mortor including all quoins, arches, pillars etc., complete all as specified and directed.

M&L for brick work with using sub class 'B' bricks, old size, straight or curved on plan exc 6 mtr mean radius, built in CM 1.6, complete all as specified and directed.

M&L for half brick work with sub Class 'B' bricks, old size, straight or curved on plan, built in CM 1:4, complete all as specified and directed.

S&F in replacement vitreous china wash hand basin, white in colour, size 550mm x 400mm, padestal type, fixed with MS/CI brackets of suitable size and including 32mm dia CP brass waste coupling and waste pipe of suitable size, complete all as specified and directed.

S&F PVC connection of size 15mm with PTMT nuts of length 450mm, complete all as specified and directed.

S&F in replacement brass chromium plated tubular towel rail, 20mm dia, 'D' type, 60cm long between flanges, complete all as specified and directed.

S&F chromium plated towel ring, round, 200mm dia, fixed with CP screws, complete all as specified and directed.

S&F liquid soap container of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats (minimum weight 105 Gms), complete all as specified and directed.

S&F grating doom 125mm dia with waste hole of PTMT (minimum weight 40 Gms), complete all as specified and directed.

M&L for preparation of new decorated surfaces of walls and applying two coats of distemper oil emulsion over a coat of 1mm wall care putty, complete all as specified and directed.

M&L for preparation of new surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of new surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.

Taking up or down GI tubing 15mm bore including cleaning for re-fixing or removal to store, complete all as specified and directed.

Taking up or down GI tubing 20mm bore including cleaning for re-fixing or removal to store, complete all as specified and directed.

M&L for 15mm bore GI water tubing, medium grade with all fitting and fixtures, fixed to walls or ceilngs or laid in floors, complete all as specified and directed.

M&L for 20mm bore GI water tubing, medium grade with all fitting and fixtures, fixed to walls or ceilngs or laid in floors, complete all as specified and directed.

S&F angle valve, brass, chromium plated, fancy type with capstan head handle, screwed down high pressure including CP brass wall flange, screwed for 15mm bore iron pipe, complete all as specified and directed.

S&F 15mm bore bib tap, brass, chromium plated, fancy type, capstan head handle, screwed down high pressure including brass CP wall flanges, complete all as specified and directed.

S&F in replacement 32mm dia waste coupling of PTMT (half or full threaded), minimum weight 45gms, complete all as specified and directed.

S&F PVC connection of size 15mm with PTMT nuts of length 600mm, complete all as specified and directed.

S&F in replacement 1000 ltrs capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), white colour, three layered, ISI Marked, hoisted and fixed in position, complete all as specified and directed.

S&F in replacement ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for 20mm bore iron pipe (minimum weight 210 Gms), complete all as specified and directed.

Demolition of un-reinforced cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M&L for 25mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in leveling course, sub base or floors, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 60mm thick machine pressed cement concrete interlocking paver block, glossy finish, any shape and size, confirming to IS:15658-2006, M-35 grade, complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base, complete all as specified and directed.

M&L for sand as in under floors/ paver block including spreading, leveling, watering if required, complete all as specified and directed.

M&L for precast cement concrete rubber moulded chequered coloured tiles of size 20cm x 20cm x 25mm thick, set in grey cement slurry, jointed and pointed in grey cement with pigment as in floors, fixed over and including 15mm thick screed bed or bedding layer in CM 1:4, complete all as specified and directed.

S&F vitreous china wash hand basin, bowl type, white in colour, size 580mm x 450mm including 32mm dia CP brass waste coupling, waste pipe and 15mm dia PVC connection pipe of 450mm long, fixed with MS brackets of size 30x30x4mm & 450mm long, complete all as specified and directed.

S&F in replacement vitreous china bowl urinal, flat back of size 465x355x265mm, white in colour with grating & union for discharge pipe excluding flushing cistern but including waste fittings, complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

M&L for precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in cover slab (for manholes or drains) and similar work with plain faces, set in CM 1:6, complete all as specified and directed.

use and waste of formwork to rough finished concrete surfaces and soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed.

Use and waste of formwork to edges of concrete (rough finished surfaces) flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide, complete all as specified and directed.

S&F TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

S&F TMT Mild steel bars 6-8mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips and/ or as in stirrups, spacers and binders, complete all as specified and directed.

S&F powder coated (thickness of powder coating not less than 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc. and all sides of frame shall be sealed with silicon sealent (inner/outer face), complete all as specified and directed.

S&F powder coated (thickness of powder coating not less than 50 micron) anodised aluminium window and ventilator shutters, openable/ louvers/ sliding type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, neoprene packing, anodised aluminium snap beading, rolling for smooth moving & locking arrangement, screws & anodised aluminium fittings as required at site and including making good disturbed surface to match with existing surface and sealed frame (inner/ outer face) with silicon sealent, complete all as specified and directed.

S&F 30mm thick factory made PVC door shutter consisting of panel of hollow PVC profile of 24mm thickness, consisting of frame made out of MS tubes of 19 gauge thickness and size of 19mmx19mm inserted inside the hollow section of stiles, top and bottom rails and two 19mmx19mm MS tubes inserted horizontally inside the hollow profile section at an equal distance from top and bottom of door and fixed with hollow profile section using 3mm thick prelam PVC sheet using screws. Hollow PVC profile shall be lipped with 10mm (5mmx2) thick x 24mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof, water proof and fire retardant Prelam PVC sheet using solvent cement on both the sides of the panel etc, complete as per manufacturer's specification and directed.

S&F solid PVC door frame of size 50x47mm, made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube, fixed in opening at site, complete all as specified and directed.

S&F 4mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.50 Sqm in each pane, complete all as specified and directed.

S&F in replacement 110mm bore PVC (SWR) pipes in any length with rubber ring joints, fixed to walls with MS clamps of suitable size, fixed at any height, complete all as specified and directed.

S&F in replacement 75mm bore PVC (SWR) pipes in any length with rubber ring joints, fixed to walls with MS clamps of suitable size, fixed at any height, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in roof of existing proofing treatment of any type and any thickness, complete all as specified and directed.

M&L for roughing surfaces of old concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc. for local depressions RCC surface and brushing neat cement slurry with 3.0 Kg/ Sqm of cement, complete all as specified and directed.

M&L for applying bituminous primer, confirming to IS-3384 @ 0.40 Kg/Sqm on prepared surface on sunny day. After the primed surface has dried, apply a coat of hot blown 85/25 penetration grade blown bitumen, confirming to IS-702 @ 1.20 Kg/Sqm on the surfaces. Provide APP (Atactiic Polypropylene) modified polymeric five layered membrane with central core of 100 micron high molecular high density firm. Minimum weight of membrance will be 3 Kg/Sqm. APP membrance will be laid across the slope from lowest line sloping roof towards ridge with minimum end lap of 150mm and side lap of 75mm bonded with hot blown bitumen. Over the APP membrance apply semi hot blown 85/25 penetration grade bitumen @ 1.20 Kg/ Sqm and blinded with fine sand in dry condition @ 0.50 Kg/Sqm dusted over the bitumen coat with aluminium paint, complete all as specified and directed. Note :- The laying of the membrane shall be got done by authorized applicator of the membrane manufacturer.

M&L for 15mm thick rendering in CM 1:3 on roof surfaces on any type, with and including using water proofing compound, finished the surface even and smooth without using extra cement, complete all as specified and directed.this BOQ.

S&F in replacement health faucet, brass, chromium plated with 1000mm long 8mm dia chrome finish flexible pipe with wall hook, fixed with CP/SS screws, complete all as specified and directed.

S&F in replacement jet spray, brass, chromium plated, heavy duty including flexible pipe suitable for 15mm bore water connection, complete all as specified and directed.

S&F in replacement soap dish of size 150x60mm, brass, chromium plated, heavy duty, fixed to wall with brass cadmium plated screws, complete all as specified and directed.

S&F in replacement brass chromium plated shower rose of 125mm size with arm and with or without swivel joints to steel pipe or union, complete all as specified and directed.

S&F in replacement glass shelf assembly, 600mm long, consisting of 5.5mm thick sheet glass shelf, 12cm wide with chromium plated brackets, guard and railing, complete all as specified and directed.

S&F in replacement chromium plated, centre hole wash basin mixer, cast copper alloy, with dual capstan heads, screwed down high pressure with lettered 'hot' & 'cold with long screwed shanks anf flynut, screwed down for 15mm bore iron pipe, complete all as specified and directed.

S&F in replacement sink wall mixer, brass, chromium plated, fancy type with capstan head handles, screwed down, high pressure with lettered 'hot' and 'cold' including CP brass wall flanges and necessary extension nipples, screwed for 15mm bore iron pipe, complete all as specified and directed.

Excavating in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for foundation, shaft, wells, cesspits, manholes, laying of pipe/ cables etc. and getting out in any type of soil, complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 mtr wide and depth exc 1.5 mtr but not exceeding 3.0 for foundation, shaft, wells, cesspits, manholes, laying of pipe/ cables etc. and getting out in any type of soil, complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exc 25cm thick, complete all as specified and directed.

Removing excavated material (soil) to a distance not exceeding 50 mtr and deposited where directed at a level not exceeding 1.50 mtr above the starting point, complete all as specified and directed.

Dismantling of 75/100mm bore cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required, complete all as specified and directed.

Demolition and breaking up 150-300mm dia drain pipes (salt glazed stineware / AC / Reinforced concrete), set in cement mortar, complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in bed to drain pipes of 150mm bore including packing under and haunching against the sides of pipes after they are laid and tested, complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in bed to drain pipes of 200mm bore including packing under and haunching against the sides of pipes after they are laid and tested, complete all as specified and directed.

Supply & Laying 150mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars, laid in trenches, complete all as specified and directed.

Supply & Laying 200mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars, laid in trenches, complete all as specified and directed.

M&L for 75mm bore cast iron spun soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to wall with MS clamps of suitable size, complete all as specified and directed.

S&F in replacement 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with oval access door, complete all as specified and directed.

S&F stack clamps, made out of 50x5mm flat iron and 16mm dia round iron stays for 75mm bore pipe including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and directed.

S&F 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with oval access door, complete all as specified and directed.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement, 75mm dia outlet, complete all as specified and directed.

S&F PVC (SWR) gully trap 150/110mm, setting and jointing with solvent cement, complete all as specified and directed.

Taking down carefully existing copper / aluminium point wiring of any size and type by disconnecting from the either terminals complete with switches, sockets, ceiling roses, regulators, bell, fan regulators etc. by unscrewing and removing materials to store for keeping in safe custody for re-use or for taking credit and making good disturbed surface of walls, floors to match with existing surfaces, complete all as specified and directed.

M&L for point wiring for light/ fan/ bell with PVC insulated unsheathed, FRLS 1100 volts grade, stranded copper conductor cable, single core 1.5 Sqmm for one light / fan point, controlled by one way switch and wire to be drawn in and including rigid PVC concealed conduit of dia not less than 20mm of 2mm wall thickness complete with all accessories including GI annealed metal box 1.2mm thick sheet of suitable size, fixed as flush wall with and including 3mm thick ebonite sheet cover and necessary screws, cap washers etc. or to be fixed on wall respectively as directed and providing earth continuity wire using PVC insulated unsheathed single core stranded copper conductor FRLS cable of size 1.5 Sqmm, complete all as specified and directed.

All as per serial item No. 91.00 here-in-above but for one 3/5 pin 5 Amps socket outlet on independent board.

All as per serial item No. 91.00 here-in-above but for 3 pin 5/15 Amps socket outlet with wire and continuity wire of size 2.5 Sqmm FRLS PVC insulated unsheathed, 1100 volts grade, stranded copper conductor, complete all as specified and directed.

S&F switch piano, flush type, one way, single pole, 5 Amps, complete all as specified and directed.

S&F socket outlet, 2 in 1, 3 pin, 5 Amps, flush type, complete all as specified and directed.

S&F socket outlet, 2 in 1, 3 pin, 5/15 Amps, flush type, complete all as specified and directed.

S&F in replacement slim linear LED lighting fixture 18/20 Watt LED batten with full base of extruded aluminium section acting as a heat sink with closed back, isolated driver complete making all connection using 1.5 Sqmm copper conductor multistandard PVC insulated 2 Core flexible cable with flexible PVC pipe from ceiling rose to fittings including taking down old one, complete all as specified and directed.

S&F in replacement LED light fitting, mirror type with high output diffuser, 2 feet long, 10 watt, 220 Volys AC, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

S&F in replacement LED street light fitting 35 Watt 230 Volts AC, outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete, complete all as specified and directed.

S&F in replacement submain wiring with copper conductor cable (2 runs of cable) multistranded of size 4.0 Sqmm PVC FRLS with all insulated unsheathed in and including PVC concealed conduit of 25mm dia, medium grade and including fittings and 1 Run X 4.0 Sqmm copper conductor cable PVC insulated unsheathed multithreaded using as continues earth wire, connected to common earth and earth dolly, complete all as specified and directed. Note :- Two run of 4.0 Sqmm and one run 4.0 Sqmm cable with one run of PVC conduit shall be measured as one unit.

S&F in replacement submain wiring with copper conductor cable (2 runs of cable) multistranded of size 6.0 Sqmm PVC FRLS with all insulated unsheathed in and including PVC concealed conduit of 25mm dia, medium grade and including fittings and 1 Run X 6.0 Sqmm copper conductor cable PVC insulated unsheathed multithreaded using as continues earth wire, connected to common earth and earth dolly, complete all as specified and directed. Note :- Two run of 6.0 Sqmm and one run 6.0 Sqmm cable with one run of PVC conduit shall be measured as one unit.

S&F in replacement single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps, 240 Volts, complete all as specified and directed.

S&F ceiling rose, surface bakelite type, size 65x50mm, three terminals, complete all as specified and directed.

S&F exhaust fan, steel body, copper winded, double bearing, AC single phase, 300mm, 1350 RPM with four blades, iron frame and iron louver, complete all as specified and directed.

S&F in replacement single pole and neutral steel sheet powder coated distribution board for MCBs fitted with bus bar, neutral link, earth bar and din rail, suitable for use on 240 Volts, 50 Hz supply, double door, SPN DB system, 8 Ways, complete all as specified and directed.

S&F in replacement MCB 6 to 40 Amp, SPN, 'C' series, 240 Volts, 50 Hz, 10 KA and other domestic loads including all terminals, fittings etc, complete all as specified and directed.

S&F in replacement MCB, SP, 6-32 Amps, 'C' series, 240 Volts, 50 Hz, 10 KA, complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to earth lead by means of bolts nuts and washers of GI and including earthing pit charcoal, common salt, GI 4mm dia lead wire with 20mm GI medium grade watering pipe and 15mm bore light grade protection pipe upto 5 mtr length with wire mesh and funnel, PCC pit in PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates), angle iron frame and RCC cover and earth work, complete all as shown in electrical plate No. 3 of SSR-2009 (Part-1) and including dismantling existing old earthng, complete all as specified and directed.

M/S GURU DEV BUILDERS (BID ID -3190625)

M/S PARDEEP KUMAR (BID ID -3190043)

JOGINDER SINGH (BID ID -3186343)

DURGA CONSTRUCTION CO (BID ID -3193768)

sohtra and co (BID ID -3190481)

paras ram pachiala (BID ID -3189762)