Construction of Proposed Tourist Complex at Auhar, Distt. Bilaspur, HP

Amount

EARTH WORK Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 Sqm on plan including getting out and disposal of excavated earth at approved dumping sitel by mechanically & manual upto all lead & lift and as perdirection of Engineer incharge. dumping site/disposel site shall be arranged by the contractor at he own cost and nothing shall be paid extra.

All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth at approved dumping sitel by mechanically & manual upto all lead & lift and as perdirection of Engineer incharge. dumping site/disposel site shall be arranged by the contractor at he own cost and nothing shall be paid extra

All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth at approved dumping sitel by mechanically & manual upto all lead & lift and as perdirection of Engineer incharge. dumping site/disposel site shall be arranged by the contractor at he own cost and nothing shall be paid extra

Ordinary rock

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 Sqm on plan), including dressing of sides and ramming of bottoms, including getting out and disposal of excavated earth at approved dumping sitel by mechanically & manual upto all lead & lift and as perdirection of Engineer incharge. dumping site/disposel site shall be arranged by the contractor at he own cost and nothing shall be paid extra

All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. including carriage of material by mechanically & manual upto all lead & lift and as perdirection of Engineer incharge

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.including carriage of material by mechanically & manual upto all lead & lift and as perdirection of Engineer incharge

All kinds of soil

Ordinary or hard rock

Supplying chemical emulsion in sealed containers including delivery as specified.including carriage of material by mechanically & manual upto all lead & lift and as perdirection of Engineer incharge

Chlorpyriphos/ Lindane emulsifiable concentrate of 20%

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-teRmtite treatment (excluding the cost of chemical emulsion) :including carriage of material by mechanically & manual upto all lead & lift and as perdirection of Engineer incharge

Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / Sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:

With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration

Treatment of soil under existing floors using chemical emul- sion @ one litre per hole, 300 mm apart including drilling 12 mm diaRmt holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:including carriage of material by mechanically & manual upto all lead & lift and as perdirection of Engineer incharge

With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :including carriage of material by mechanically & manual upto all lead & lift and as perdirection of Engineer incharge

1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size)

1:5:10 (1 cement : 5 coarse sand): 10 graded stone aggregate 40 mm nominal size)

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Extra for addition of synthetic Polyester triangular fibre of length 12mm, effective diaRmt 10-40 microns and specific gravity of 1.34 to 1.40 in cement concrete / RCC / Flooring / water retaining structures by using 125gms of synthetic Polyester triangular fibre for 50 Kg cement used .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Centering and shuttering including strutting, propping etc. and removal of form. for :including carriage of material by mechanically & manual upto all lead & lift and as perdirection of Engineer incharge

Foundations, footings, bases of columns, etc. for mass concrete

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Suspended floors, roofs, landings, balconies and access platform.

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Columns, Pillars, Piers, Abutments, Posts and Struts

Stairs, (excluding landings) except spiral-staircases

Edges of slabs and breaks in floors and walls Under 20 cm wide

Cornices and mouldings

Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 Rmt or part thereof (Plan area to be measured)

Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.including carriage of material by mechanically & manual upto all lead & lift and as perdirection of Engineer incharge .Make(TATA/Sail/Jindal. )

Thermo-Mechanically Treated bars of grade Fe-500D or more.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level including carriage of material by mechanically & manual upto all lead & lift and as perdirection of Engineer inchargeMake(TATA/Sail/Jindal. )

Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and filling in position, blown bitumen in expansion joints. including carriage of material by mechanically & manual upto all lead & lift and as perdirection of Engineer incharge

Providing and filling in position bitumen mix filler of proportion 80 kg. of hot bitumen, 1 kg. of cement and 0.25 cubic Rmt of coarse sand for expansion joints.including carriage of material by mechanically & manual upto all lead & lift and as perdirection of Engineer incharge

Providing and fixing in position 12mm thick bitumen impregnated fiber board conforming to IS: 1838, including cost of primer, sealing compound Grade-A in expansion joints. including carriage of material by mechanically & manual upto all lead & lift and as perdirection of Engineer incharge

Providing and fixing sheet covering over expansion joints with iron screws as per design.Aluminium fluted strips 3.15 mm thick including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge .150 mm wide

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge . (Note :- Cement content considered in this item is @ 330 kg/Cum. Excess/ less cement used as per design mix is payable/recoverable separately).

All works upto plinth level

All works above plinth level upto floor V level

Extra for providing richer mixes at all floor levels. Note:- Excess/less cement over the specified cement content used is payable /recoverable separately.Providing M-30 grade concrete instead of M-25 grade BMC/ RmtC. (Note:- Cement content considered in M-30 is @ 340 kg/Cum)

Add for using extra cement in the items of design mix over and above the specified cement content therein.

(2nd class) Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: including carriage of material by mechanically & manual upto all lead & lift and as perdirection of Engineer incharge .

Cement mortar 1:6 (1 cement : 6 coarse sand)

(2nd class) Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : including carriage of material by mechanically & manual upto all lead & lift and as perdirection of Engineer incharge .

Cement mortar 1:6 (1 cement : 6 coarse sand)

(2nd class) Brick work in plain arches in superstructure above plinth level and upto floor five level including centering and shuttering complete for span up to 6 Rmts with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:3 (1 cement : 3 coarse sand). including carriage of material by mechanically & manual upto all lead & lift and as perdirection of Engineer incharge .

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. including carriage of material by mechanically & manual upto all lead & lift and as perdirection of Engineer incharge .

Cement mortar 1:4 (1 cement :4 coarse sand)

Extra for providing and placing in position 2 Each 6mm dia. M.S. bars at every third course of half brick masonry. including carriage of material by mechanically & manual upto all lead & lift and as perdirection of Engineer incharge .

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platfoRmts, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. including carriage of material by mechanically & manual upto all lead & lift and as perdirection of Engineer incharge .Granite of any colour and shade

Area of slab upto 0.50 Sqm

Area of slab over 0.50 Sqm

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Marble work

Granite work

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platfoRmt, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.including carriage of material by mechanically & manual upto all lead & lift and as perdirection of Engineer incharge

Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/Sqm including pointing in white cement complete.including carriage of material by mechanically & manual upto all lead & lift and as perdirection of Engineer incharge

Raj nagar plain white marble/ Udaipur green marble/ Zebra black marble

Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.including carriage of material by mechanically & manual upto all lead & lift and as perdirection of Engineer incharge

Granite Stone of approved shade

Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/Sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc.

Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required.including carriage of material by mechanically & manual upto all lead & lift and as perdirection of Engineer incharge

Providing and fixing copper pins 7.5 cm long 6 mm diaRmt for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Second class seasoned teak wood

seasoned Sal wood

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conformingto IS : 2046 Type S, including cost of adhesive of approved quality.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

1.0 mm thick

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Extra for providing vision panel not exceeding 0.1 Sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured):

Rectangular or square

Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge :2nd class teak wood. 50x12 mm

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diaRmt bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6 mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically & horizontally) or at required spacing near opening, with necessary welding at junctions and fixing the frame to wall/ ceiling/ floors with steel dash fasteners of 8 mm dia, 75 mm long bolt, including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.(TATA/Sail/Jindal Make or equivalent ) .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.(TATA/Sail/Jindal Make or equivalent ) .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.(TATA/Sail/Jindal Make or equivalent ) .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

Electric resistance or induction butt welded tubes

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.(TATA/Sail/Jindal Make or equivalent ) .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

25 mm thick

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of Eaching of steps etc. complete.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

Providing and fixing glass strips in joints of terrazo/ cement concrete floors..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.40 mm wide and 4 mm thick

Providing and fixing 1st quality rectified Glazed Ceramic floor tiles conformingto IS : 15622 (thickness to be specified by the manufacturer ) of approved make (Nitco/ kajaria or equivalent) in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per Sqm including pointing in white cement mixed with pigment of matching shade complete. .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.size (600x600x10mm)

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conformingto IS : 15622, of approved make (Nitco/ kajaria or equivalent) in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sqm including grouting the joints with white cement and matching pigments etc., complete. .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conformingto IS: 15622, of approved make (Nitco/ kajaria or equivalent) in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

Double Chargerd Size of Tile 600x600x10mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conformingto I.S. 15622, of approved make (Nitco/ kajaria or equivalent), in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sqm including grouting the joint with white cement & matching pigments etc. complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

Double Chargerd Size of Tile 600x600x10 mm

Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required pattern in linear portion of the building all complete as per architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/Sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc.

Providing and laying machine cut, mirror polished Marble stone flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/Sqm, including pointing with white cement slurry admixed with pigment to match the marble shade, including rubbing, curing and polishing etc. all complete as specified and including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc.

Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per Sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified andincluding carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

In 75x75 mm deep chase

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately).including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

12 mm thick Cement fiber board as per IS: 14862

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/Sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed

with inteRmtediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm Each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. inteRmtediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing periRmt channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the periRmt of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall

screws @ 230 mm interval, including fixing of gypsum board to ceiling section and periRmt channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of periRmt channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

12.5 mm thick tapered edge gypsum plain board conformingto IS: 2095- (Part I) : 2011 (Board with BIS certification marks)

12.5 mm thick tapered edge gypsum moisture resistant board

12 mm cement plaster of mix :including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

1:4 (1 cement: 4 coarse sand)

1:6 (1 cement: 6 coarse sand)

15 mm cement plaster on rough side of single or half brick wall of mix:including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

1:4 (1 cement: 4 coarse sand)

1:6 (1 cement: 6 coarse sand)

15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix :including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

1:6 (1 cement: 6 coarse sand)

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.

Extra for plastering on circular work not exceeding 6 m in radius:

In two coats

6 mm cement plaster of mix :.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

1:3 (1 cement : 3 fine sand)

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

New work (two or more coats) over and including water thinnable priming coat with cement primer

Finishing walls with textured exterior paint of required shade .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.Make(Asian or Nerolac)

New work (Two or more coats applied @ 3.28 ltr/10 Sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 Sqm

Finishing walls with Acrylic Smooth exterior paint of required shade .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.Make(Asian or Nerolac)

New work (Two or more coat applied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 Sqm)

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.Make(Asian or Nerolac)

New work (Two or more coats applied @ 1.43 litre/ 10 Sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm.

Applying priming coat:With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.Make(Asian or Nerolac)

With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.Make(Asian or Nerolac)

Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 Rmts..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.

Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density).

Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel foRmt work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately)..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge.Note:- Cement content considered in M-30 is @ 340 kg/Cum. Excess/ less cement used as per design mix is payable/ recoverable separately.Cement concrete prepared with batch mixing machine

Providing and fixing in position pre-moulded joint filler in expansion joints. .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and laying in position bitumen hot sealing compound for expansion joints etc..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Using grade ‘A’ sealing compound.

Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot theRmtoplastic material by fully/ semi automatic theRmtoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Construction of granular sub-base by providing close graded Material conformingto specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in unifoRmt layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

With material conformingto Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30

Construction of dry lean cement concrete sub base over a prepared sub-grade with coarse and fine aggregate conformingto IS:383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per specifications, cement content not to be less than 150 Kg/Cum, optimum moisture content to be deteRmtined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, for all leads & lifts, laid with a mechanical paver, compacting with 8-10 tonne vibratory roller, finishing and curing etc. complete .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing 10x10x7.50 cm Granite stone block hand cut and chisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints 10mm wide filled with same mortar including ruled pointing etc. complete .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing & making Gabion structure with Mechanically Woven Double Twisted Hexagonal Shaped Wire mesh Gabion Boxes as per IS 16014:2012,MORTH Clause 2500, of required size, Mesh Type 10x12(D=100 mm with tolerance of ±2%), Zinic+10% Al alloy+PVC coated, Mesh wire diaRmt 2.7/3.7mm (ID/OD), mechanically edged/ selvedged with partitions at every 1m interval and shall have minimum 10 numbers of openings per Rmt of mesh perpendicular to twist, tying with lacing wire of diaRmt 2.2/3.2mm(ID/OD), supplied @3% by weight of Gabion boxes, filled with boulders with least dimension of 200 mm, as per drawing, all complete .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing stone textured concrete paver tiles (M-40 grade) of approved size and approved sample, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints 10mm wide filled with same mortar including ruled pointing etc. complete .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

20mm thick Grey/Beige or any approved shade

Providing, laying and fixing of precast suacer drain (solid) of size 600x300x70/100 mm (thickness 70mm at curve portion in centre & 100mm at both side) jointed with 1:3 cement mortar (1 cement : 3 coarse sand )over the base of 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand) in slope, line & level as shown in drawing and manufactured by M-30 grade of concrete by vibro compaction process using joint less FRP moulds so as to achieve shuttering finish etc. all complete under instruction of engineer-in-charge..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing, laying and fixing of precast suacer drain (Perforated with 4 holes) of size 600x300x70/100 mm (thickness 70mm at curve portion in centre & 100mm at both side) jointed with 1:3 cement mortar (1 cement : 3 coarse sand )over the base of 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand) in slope, line & level as shown in drawing and manufactured by M-30 grade manufactured with M 30 grade of concrete & reinforced with 8 mm dia steel at 100 mm c/c bothways by vibro compaction process using joint less FRP moulds so as to achieve shuttering finish etc. all complete.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conformingto IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

For fixed portion Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ Sqm)

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conformingto IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

With brass cover plate minimum 1.25 mm thickness

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Upto 5mm depth and 5 mm width

Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Polyester powder coated minimum thickness 50 micron aluminium

Providing and Placing in position suitable PVC water stops conformingto IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete :including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Serrated with central bulb (225 mm wide, 8-11 mm thick)

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing peRmteability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product perfoRmtance shall carry guarantee for 10 years against any leakage.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

For vertical surface two coats @ 0.70 kg per Sqm

For horizontal surface one coat @1.10 kg per Sqm.

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.

(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (Each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.

(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perfoRmt as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium

item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the perfoRmtance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in Sqm. up to two decimal places.

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge (i) Ist course of applying cement slurry @ 4.4 kg/Sqm mixed with water proofing compound conformingto IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per Sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to Each other with bitumen @ 1.7 kg/Sqm).

Providing and fixing 24gauge x 19 mm size galvanized chicken wire mesh to junctions of concrete and masonary work and other locations where called for including cutting to required sizes side laps of minimum 75 mm and fixing in position with necessary clips and U shaped glavanised wire nail etc.complete.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing colour coated metro sheet (1mm thick) of approved make and colour roofing sheet fixing over exising 12 mm thick Cement fiber board and MS frame (Cement fiber board & MS steel shall be paid saperately) with ridge of approved thickness J or L hooks, bolts and nuts 6mm dia Rmt with prepainted limpet and rubber washers accessories etc. all complete as per drawings or direction including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing certified restroom cubicle system of approved make comprising of green guard certified solid compact laminated water proof board, 18-12 mm thick made as per IS: 2046 (phenolic core board) and as per BS-476/97 for fire retardant for toilet showers, water closet etc . The board shall be manufactured under high pressure and temperature by impregnating kraft papers and outer decorative papers with theRmtosetting phenolic/ melamine resins (low VOC). The cubicle system shall be resistant towards water, chemical, scratch, impact and heat and shall be anti bacterial, colour fast and shall have accessories like door knob, Gravity/ auto return hinges, privacy thumb turn with occupancy indicator, coat Hook, etc all in SS 304. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

The hardware and fixings includes anchoring of all fixed front panel to floor with SS 316 L brackets/ base plates with a clearance height 100 mm to 150 mm, and covered with SS 316 Shoe box plates, wall and corner joineries (brackets and channels) shall be SS 304 grade, SS 304 screws, rubber noise reduction tape . The cubicle unit shall be installed in approved finish, shades and colours as per specifications and directions of Engineer-In-Charge, including minimum 5 (five) years warranty against any moisture related damages to all inteRmtediate panels, doors, hardqwares etc. Standard dimension of the cubicle system shall be of approx. 2100 mm Height (overall) x 1500mm Depth and 900 mm to 1100 mm Width which includes minimum 600 mm door size width.

18mm thick front panel including door and all necessary accessories, fittings and hardware etc.(measured from floor to top rail)

12mm thick divider / inteRmtediate panel including all necessary accessories, fittings and hardware etc.(measured from floor to top rail)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge Toughened glass 6 mm thickness

Providing and fixing 32 mm dia D- type min 750mm long brush/matt finish Stainless steel grade-304 pull handles of approved make with necessary screws etc. complete.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing, fitting & fixing HPL Cladding (exterior grade) of work made out of 1"X1.5" almunium section frame work. The sections are to be placed 600mm c/c. 6mm HPL to be nailed over the suface of the frame work as per design approved by architect. The edges to be covered with decorative beading, including two coat of waxpolish to superior finish, including cost of all labour & material etc. all complete as per direction of engineer-in-charge. (Cost of aluminium tube shall be paid in basic item) Basic cost Rs. 200/- sqft. Make (Amulya or equivalent) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Extra for making ACP sheet jali by CNC machine of pattern approved by architect including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing beveled edge mirror of superior glass of approved make (thickness of glass as per technical specifications) and fixed to wooden cleats/rawl plug with C.P. brass/SS Stud screws and washers etc. all complete.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing & fixing of 4 point locking system for aluminium sliding doors including powder coated aluminium mortise door handle and transmission lock strip 1600mm of approved make and approved sample with necessary screws / fittings etc. all complete.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Extra for providing and fixing Stainless Steel (SS - 304) with adjustable double nylon roller (heavy duty) of approved make & sample in place of aluminum hinges for aluminium sliding door shutter with necessary screws etc. complete.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing of shower partition fixed type made of 8mm thick toughened glass as per drawing & specification with all S.S. shower fittings grade 304 of approved make complete including glass connectors (wall/floor to glass) & silicon sealant etc. all completeincluding carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge For payment, only the actual area of glass on one face of the glass panels (excluding the areas of the grooves and weather silicone sealant) shall be measured in Sqm.

Providing and fixing of shower partition fixed & openable type made of 8mm thick toughened glass as per drawing & specification with all S.S. shower fittings grade 304 of approved make complete including glass connectors (wall/floor/glass to glass), shower hinges, PVC seal, door knob & silicon sealant etc. all complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge For payment, only the actual area of glass on one face of the glass panels (excluding the areas of the grooves and weather silicone sealant) shall be measured in Sqm.

Providing and fixing machine cut, mirror polished, Granite stone of approved shade in required pattern as per architectural drawings with 18 mm thick stone slab in riser of steps, skirting, dado, cladding and pillars laid on 12 mm (average) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment to match the stone shade etc. all complete at all levels/floors as specified and including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Extra for Forming groove of uniform size in the external plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge 15 mm wide and 6 mm deep groove

Providing & fixing GRC panel (60mm thick) on external walls as per the drawing or approved by architect. Fixing to be done on external wall / Internal wall over MS tube / MS Angle frame including the necessary SS clamps, Fastener, scaffoldings required etc. all complete by specilised vendor in strict supervision of manufacturer including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge (Cost of MS tube / MS Angle shall be paid in basic item) 60 MM THICK

Excavating, supplying and filling with local earth of approved grade and quality having plasticity index less than 6 (Six) (including royalty) by mechanical transport including ramming and watering of the earth in layers not exceeding 20 cm (twenty centiRmt) in trenches, plinth, sides of foundation etcetera complete including entire carriage of material within all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying and stacking at site dump manure from approved sources (duly screened through specified sieve) including carriage upto 100 Rmts (One hundred Rmt) on head load and 1 km (One kiloRmt) by mechanical transport (manure measured in stacks will be reduced by 8% (Eight percent) for payment) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Spreading sludge dump manure or/and good earth in required thickness (cost of sludge, dump manure or/and good earth to be paid seperately) including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals in pattern finish approved by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Rough dressing trenched ground including breaking clods including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals in pattern finish approved by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Fine dressing the trenched ground including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals in pattern finish approved by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Preparation and consolidation of sub grade with power road roller of 8 to 12 (Eight to twelve) tonne capacity after excavating earth to an average of 22.5 cm (Twenty two point five centiRmt) depth, dressing to camber and consolidating with road roller including making good the undulations etcetra and re-rolling the sub grade and disposal of surplus earth with upto all leads including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Mixing earth and sludge or manure in proportion specified or directed including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals in pattern finish approved by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and Grassing with BaRmtuda, Korean, Maxicon, Lillgiri and its equivalent grass including watering and maintenance of the Lawn for 30 (Thirty) days or more till the grass from a thick lawn free from weeds and fit for moving including supplying good earth if needed. (The cost of grass shall be paid for separately in rows 5cm (Five centiRmt) apart in either direction) including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals in pattern finish approved by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing 50mm (Fifty milliRmt) nominal size G.I. Pipes complete with G.I. fittings and clamps, including making good the walls etcetra concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall Jindal (Hisar) / TATA make including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 50mm (Fifty milliRmt) nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Flexible pipe including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 20mm (Twenty milliRmt) nominal bore C.P. brass bib cock of Jaquar (CON-047KN) with wall flange approved quality conformingto IS:8931 make of Jaquar/Parryware/Hindware including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Sprinklar system all around the ground including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Single socketed pipes 110mm ( one hundred ten milliRmt) dia of Supreme/Fenolax/ Vectus make on wall face unplasticised Rigid PVC rain water pipes conformingto IS : 13592 Type A, including jointing with seal ring conformingto IS : 5382, leaving 10 mm ( ten milliRmt) gap for theRmtal expansion complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Maintenance of Grassing with BaRmtuda, Korean, Maxicon, Lillgiri and its equivalent grass for one year.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying Royal Palm Tree including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

SANITARY INSTALLATIONS Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast P or S trap, 10 Litre low level P.V.C. flushing cistern with manually controlled device(handle lever) conformingto IS:7231, with all fittings & fixtures complete including cutting and making good the walls and floors wherever required.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

White vitreous chinaOrissa pattern W.C. pan of size 580x480mm with integral type foot rests.

Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fitting complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge .Flexible pipe

40 mm dia

Providing and fixing 100mm sand cast iron grating for gully trap.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing 1200x1500mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge. Make (Jaquar or equivalent)

Providing and fixing 600 x 120 mm glass shelf with CP brass brackets and guard rail complete, fixed to wooden cleadts with CP brass screws.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge. Make (Jaquar or equivalent)

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent aRmt complete, including cost of cutting and making good the walls and floors ..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge 100 mm inlet and 100 mm outlet.

Sand cast iron S&S as per IS: 3989

Supply, installation and commissioning of FLORANTINE-COUNTER TOP WASH BASIN Model No; FLS-WHT-5935- Jaquar or equivalent. Item includes all hardware required for installation. .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supply, installation and commissioning of 'FLORANTINE- WALL HUNG WC, CISTERN AS PER WC Model No; FLS-WHT-5953- JPPSM- Jaquar or equivalent. Item includes all hardware required for installation..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supply, installation and commissioning of 'BUILT IN BATH TUB Model No; JBT-WHT-FONT170FX:- with drain pipe & filter Model: JWA-CHR-132201:Jaquar or equivalent. Item includes all hardware required for installation..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supply, installation and commissioning of ''VIGNETTE PRIME- SINGLE LEVER BASIN MIXER Model No;VGP-81011B- Jaquar or equivalent. Item includes all hardware required for installation..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supply, installation and commissioning of ''HEALTH FAUCET Model No;ALD-587- Jaquar or equivalent. Item includes all hardware required for installation. .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supply, installation and commissioning of ''SHOWER HEAD Model No;OHS-1709- Jaquar or equivalent. Item includes all hardware required for installation..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supply, installation and commissioning of ''VIGNETTE PRIME-DIVERTER Model No;VGP-81079NK- Jaquar or equivalent. Item includes all hardware required for installation..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supply, installation and commissioning of ''FUSION- SPOUT Model No;FUS-29231- Jaquar or equivalent. Item includes all hardware required for installation..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supply, installation and commissioning of ''CP WASTE JALI Model No;ALD-729- Jaquar or equivalent. Item includes all hardware required for installation..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supply, installation and commissioning of ''BOTTLE TRAP (WITH INTERNAL PARTITION) 32 MM SIZE WITH 250 MM & 190MM LONG WALL CONNECTION PIPES Model No;ALD-769L250x190- Jaquar or equivalent. Item includes all hardware required for installation..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supply, installation and commissioning of ''450MM LONG BRAIDED HOSE Model No;ALD-805B- Jaquar or equivalent. Item includes all hardware required for installation..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supply, installation and commissioning of ''ANGULAR STOP COCK WITH WALL FLANGE Model No;VGP-81053- Jaquar or equivalent. Item includes all hardware required for installation..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supply, installation and commissioning of ''SOAP DISPENSER WITH GLASS BOTTLE Model No;AKP-35735P- Jaquar or equivalent. Item includes all hardware required for installation..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supply, installation and commissioning of ''GRAB BAR Model No;ACN-1101SP- Jaquar or equivalent. Item includes all hardware required for installation..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supply, installation and commissioning of ''TISSUE PAPER HOLDER Model No;ACN-1121BN- Jaquar or equivalent. Item includes all hardware required for installation..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supply, installation and commissioning of ''TOWEL RING Model No;ACN-1121BN- Jaquar or equivalent. Item includes all hardware required for installation..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supply, installation and commissioning of ''FLUSH PLATE Model No;JCP-CHR-152415- Jaquar or equivalent. Item includes all hardware required for installation..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supply, installation and commissioning of ''COAT HOOK Model No;ACN-1161N5- Jaquar or equivalent. Item includes all hardware required for installation..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supply, installation and commissioning of ''EXPOSED PARTS OF FLOOR MOUNTED SINGLE LEVER BATH MIXER Model No;OPP-5121KPM- Jaquar or equivalent. Item includes all hardware required for installation..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supply, installation and commissioning of ''UNDER COUNTER BASIN, Model No;CNS-WHT-701- Jaquar or equivalent. Item includes all hardware required for installation..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supply, installation and commissioning of ''QUARTER TURN PILLAR COCK, Model No;VGP- 81001- Jaquar or equivalent. Item includes all hardware required for installation..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supply, installation and commissioning of ''WALL HUNG WC, Model No;FLS WHT-5953PPSM- Jaquar or equivalent. Item includes all hardware required for installation..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supply, installation and commissioning of ''URINAL, Model No URS-WHT-13261- Jaquar or equivalent. Item includes all hardware required for installation..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supply, installation and commissioning of ''URINAL PARTITION, Model No 1810-UC / 1110 UC- Jaquar or equivalent. Item includes all hardware required for installation..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supply, installation and commissioning of ''HAND DRYER, Model No HDR-SSF-AK-2807- Jaquar or equivalent. Item includes all hardware required for installation..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps of Make (Jaquar or equivalent).including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing white vitreous china pedestal forwash basin completely recessed at the back for the reception of pipes and fittings of Make (Jaquar or equivalent).including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete (32 mm dia.)ofMake (Jaquar or equivalent) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge Make (Jaquar or equivalent)

Providing and fixing Stainless Steel towel rail of Jaquar (ACN-CHR-1111SM) complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm ( six hundred milliRmt) long .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge Make (Jaquar or equivalent)

Providing and fixing Cromium Plated soap Dish (ACN 1131N) with CP Brass bracket fixed to wooden cleat with CP brass Screw complete.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge Make (Jaquar or equivalent)

Providing and fixing C.P. brass bib cock of approved quality conformingto IS:8931of Series CON 047 KN :15 mm nominal bore. Short Body including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge Make (Jaquar or equivalent)

Providing and fixing C.P. brass bib cock of approved quality conformingto IS:8931 ( of Series CON 107KN ):15 mm nominal bore Long Body . including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge Make (Jaquar or equivalent)

P/F Single Liver Sink Mixer Swinging Spout ( Wall mounted Model) of Series( FUS 29163) with connecting legs & wall flanges of Cera/ PerryWare make or its equivlent.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge Make (Jaquar or equivalent)

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conformingto IS:8931.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board 510x1040 mm bowl depth 250 .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

15mm Nominal Size

Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main :including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

15mm Nominal Size

20mm Nominal bore

Providing and fixing Cromium Plated grating of approved quality and colour including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 Rmt long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge Make (Jaquar or equivalent)

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) :3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg)15mm dia With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diaRmt, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing soil, waste and vent pipes 75 mm dia Rmt Centrifugally cast (spun) iron socketed pipe as per IS: 3989 including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing soil, waste and vent pipes 100 mm dia Rmt Centrifugally cast (spun) iron socketed pipe as per IS: 3989 including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

100 mm Sand cast iron S&S as per IS- 3989

75 mm Sand cast iron S&S as per IS- 3989

Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100x100x100 mm Sand cast iron S&S as per IS - 3989

Providing and fixing double equal plain junction of required degree. 75x75x75 mm Sand cast iron S&S as per IS - 3989

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent aRmt complete, including cost of cutting and making good the walls and floors :100 mm inlet and 75 mm outlet Sand Cast Iron S&S as per IS. 3989

P/F Collar of Various Dia

Sand cast iron S&S as per IS - 3989 100mm

Sand cast iron S&S as per IS - 3989 75mm

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diaRmt including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

15 mm dia nominal bore

20 mm dia nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diaRmt : including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating Each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : Pipes, cables etc. exceeding 80 mm dia. But not exceeding 300 mm dia

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design :100 mm diaRmt S.W. pipe

Providing and fixing Stainless steel recessed type toilet paper holder of JAQUAR ( AHS-CHR-1551) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications.

Providing and fixing CP brass Towel Ring square with round flange of Jaquar (ACN-CHR-1121N) complete with CP brass brackets fixed to wooden plugs with CP brass screws compete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications.

Providing and fixing soil, waste and vent pipes conformingto IS 1729..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

100 mm dia Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete:including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

Providing and fixing plain bend of required degree.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905

Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

100x100x100 mm sand cast iron S&S as per IS 1729

Providing and fixing single equal plain junction of required degree. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

Providing and fixing single unequal plain junction of required degree. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

Providing and fixing teRmtinal guard.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

Providing and fixing collar including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

100 mm sand cast iron S&S as per IS 1729

Painting sand cast iron/centrifugally cast (spun) iron soil, waste vent pipes and fittings with paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

100 mm dia Rmt pipe

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having theRmtal stability for hot & cold water supply including all (CPVC) plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This including jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge. .

20 mm outer dia pipes.

25 mm outer dia pipes.

32 mm outer dia pipes.

40 mm outer dia pipes.

50 mm outer dia pipes.

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having theRmtal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This including jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the the same including testing of joints complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

20 mm outer dia pipes.

25 mm outer dia pipes.

32 mm outer dia pipes.

Providing and fixing brass stop cock of approved quality complete.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

15 mm nominal bore

20 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

25 mm dia nominal bore

32 mm dia nominal bore

40 mm dia nominal bore

50 mm dia nominal bore

Providing and placing on terrace (at all floor levels) Polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement amd making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing C.P.brass bib cock of approved quality conformingto IS : 8931.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and fixing C.P.brass long body bib cock of approved quality conformingto IS standard and Weighing not less than 690 gms. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge .15 mm nominal bore.

Providing and fixing C.P. bass angle valve for basin mixer and geyser points of approved quality conformingto I.S:8931 a) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge 15 mm nominal bore

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conformingto IS : 13592 Type A, including jointing with seal ring conformingto IS : 5382, leaving 10 mm gap for theRmtal expansion, (i) Single socketed pipes.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

110 mm diaRmt

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conformingto IS : 13592 Type A, including jointing with seal ring conformingto IS : 5382, leaving 10 mm gap for theRmtal expansion.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

110 mm coupler

110 mm bend

Providing and fixing GI Pipe complete with GI fittings including trenching and refilling etc. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

50 mm dia nominal bore.

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

25 to 40 mm nominal bore

50 to 80 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

50 mm dia nominal bore

Providing and fixing square-mouth S.W. gully trap Class SP-1 complete with C.I. grating brick masonry chamber with grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge .150x100mm size P type With common burnt clay F.P.S (non - modular) bricks of class designation 7.5

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

250 mm dia R.C.C. Pipe

300 mm dia R.C.C. Pipe

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation in cement concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design :.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Inside size 90 x 80 cm and 45 cm deep including C.I. cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg). .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

With common burnt clay F.P.S (non - modular) bricks of class designation 7.5

Inside size 120 x 90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diaRmt, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg)..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

With common burnt clay F.P.S (non - modular) bricks of class designation 7.5

Extra for depth for manholes With common burnt clay F.P.S (non - modular) bricks of class designation 7.5 .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Size 90x80 cm

Size 120x90 cm

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conformingto IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's peRmtanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design..including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

With common burnt clay F.P.S (non - modular) bricks of class designation 7.5

Providing and constructing brick masonry chamber for undergroundCI inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :Inside dimensions 455x610 mm and 45 cm deep for single pipe line :With common burnt clay F.P.S (non - modular) bricks of class designation 7.5 .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 deep for pipe line with one or two inlets :

Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Extra depth beyond 45 cm of brick masonry chamber:For 455x610 mm size With common burnt clay F.P.S (non - modular) bricks of class designation 7.5

For 500x700 mm size With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

For 600x850 mm size With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 Rmt depth below ground level.Rocky strata including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge Boulders 300 mm dia

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RmtS) pipes with ribs, conformingto IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths,including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

150 mm nominal size dia

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer,for all leads & lifts, all complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

HOT WATER SYSTEM HEAT PUMP TYPE HOT WATER BOILERS SAO SMITH HEAT PUMP of 450 Litre inbuilt Storage tank & 8.0 KW output and 2.2 kw is input in Air to Water Heat Pump. Triple protection – Humidity sensor, built-in Anti-dry & Anti-frost function. Water can be heated up to 65°C with heat pump mode, which prevents breeding of Legionella bacteria.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

TANK STORAGE CAPACITY - 450 LTRS

HOT WATER MIXING TANK of cap. 3000Ltrs. complete with inlet cold water, inlet/outlet, drain connection with flanges, including 2 no’s ball valves, 2 no’s dial type theRmtoRmt, 01 no’s automatic air vent valve, 01 no’s theRmtal bleed valve, 01 no’s strainers complete in all respects. The tank shall be fabricated out of SS304 of thickness (shell 5 mm & dish 5 mm) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Hot water tank insulation epoxy coated and duly insulated with 100mm thick Glass Wool insulation with 24-gauge aluminium cladding including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Three phase pumps for circulation of water to heat pump (1w+1s).including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Three phase Grundfos pump for Re- circulation of water heat pump to tank(1w+1s).including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Automated electrical panel for circulation and recirculation pumps with the sensor arrangement complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Total system Electrical and Plumbing, including all ball valves, Y-Steiner, NRV, PRV, TheRmto well, Contractor, Isolator & wiring including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

RO 500 LPH Supply, installation, testing & commissioning of R.O. unit of 500 LPH (net output) capacity as per following specification :-including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge Input Water Quality :

Total Dissolved Solids (TDS) : 500-2000 mg/l Total Hardness (as CaCO3) [After Filtration & Softening] : 150 mg/l as CaCO3 Residual free chlorine : Nil Chlorides (as cl) : 78 mg/l Iron (as Fe) : 0.044 mg/l Fluorides : Nil Output Water Quality : Total Dissolved Solids (TDS) : < 150 mg/l Total Hardness (as CaCO3) : 50 mg/l as CaCO3 Turbidity : < 1 System Recovery > 60-70%.

Pump, Equipment, Piping & Accessories :- Micron Cartridge Filter Antiscalent Dosing System SMBS Dosing Sodium Hypochlorite Dosing Acid Dosing R.O. High Pressure Pump "R.O. Modules (R.O. membrane + R.O. pressure tube) R.O. Cleaning System Instrumentation & Electrical work Low Pressure Side Piping, Valve & Accessories. High Pressure Side Piping, Valve & Accessories. RO water storage tank of capacity 1000 liters.

Supplying complete testing kit with all chemicals complete suitable for conducting test on water quantity. The test kit shall be suitable for measuring, TDS, PH, hardness, iron content etc.

Supply, Installation, Testing & Commissioning of Single Stage/Multi stage Horizontal / Vertical centrifugal monobloc pumping set with delivery SS 304 body and SS 304 impeller, shaft of stainless steel SS 316 and SS shaft sleeve C.I. Base & head, mechanical seal, connected to a TEFC induction motor suitable for 400/440 volts, 3 phase 50 cycles A.C. supply with 150 mm dia pressure gauge with gunmetal isolation cock, level controller, vibration eliminating pads as required, M.S fabricated base plate bolted to cement concrete foundations complete.

Duty ParaRmts of RO Feed Pump: Capacity/Flow Rate - 1000 l /hour (Each) Pumping Head - 15-20 m 1 Set = 2 Each. pump (1 working+ 1 standby) Motor kW - 1.5 KW (Approx) or as per manufacture recommendation Location - terrace Type of Pump - Horizontal/Vertical Centrifugal monoblock pump The system will include 1000 Ltrs SS tank and all interconnecting piping.

Raw Water Treatment Feed Pump set ( Filter feed pumps) Supplying, installing, testing & commissioning of horizontal / vertical centrifugal filter feed water pumps CI head & Base, SS-304 impeller along with motor, pressure guage with isolation cock, isolation valve, NRV on delivery line, isolation valve, stainer including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Pumps shall be suitable for 415 ± 10% volts 3 phase 50 Hz A.C supply & shall be having the following requirement complete with foundation and associated civil works. Suction & Delivery Header - C.I Control Valve On suction and Delivery - Ball Valve Only (No Butterfly Valve Accepted). Flow Prevention - Only Check Valve Suction & delivery header including all pipes, suction & delivery sides valves, NRV, Pressure gauges & accessories complete. Flow Rate : 3.5 LPS (1 duty + 1 stand by) Head : 30 M Min. Motor HP : 2.0 H.P. (Each)

Control panel for raw water 2 Each pumps for automation provision with cabling, contractor etc complete. ( For Filter feed pumps Automation ) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

HYDRO-PNEUMATIC SYSTEM Supply, Installation, Testing And Commissioning Of Compact Self Contained Skid Mounted Hydropneumatic System with VFD As Follows: including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

a. Vertical, In-Line, Multisage, centrifugal pumps with SS-304 casing and impeller and shaft, CI base & S.S suction-discharge casing coupled with TEFC efficiency class 1 motor, 2900 rpm, three phase (with mechanical seal) b. Skid mounted or wall mounted electrical control panel with microprocessor PID controller and frequency inverter integrated in a single enclouser with pressure sensor transmitter, minimum two lined LCD display, diodes to indicate pump ready, pump running and fault and capable to communicate with other controllers following MODBUS-RTU or BACNET Class-2 protocall through RS485 port. System should be capable to compensate for frictional losses at lower flows. All alaRmts should be displayed in the controller. System should be equiped with dry running protection

Quantity : 1 No. c. Precharged diaphram pressure vessel with food grade membrane, charging connection, connected to outlet header with necessary flanges, gaskets, isolating valves, nuts/bolts etc complete. d. Set of accessories such as pressure guage, pressure transducers, inter connecting power and control cabling, MS base frame with epoxy & synthetic enamel paint, neoprane rubber pads( anti vibration) etc. complete. Domestic hydropneumatic system as follows: No. of pumps 2 (1 Working + 1 Standby) Water Flow Rate 3.5 LPS Each Head 30 M

Supply, Installation, Testing and Commissioning of pump controllers Cum level controllers with level indicators in 16G powder coated steel sheet metal panels including the following:

WATER TREATMENT PLANT Dual Media Filter Supplying, storing, handling, installation, testing & commissioning of Vertical FRP Dual Media Filter tested to 5.0 Kg/sqcm consisting of intial charge of media consisting (300mm bed depth of anthracite, filtering sand and support media), with frontals and manual multiport valve of 40 NB . Capacity : 3.5 LPS Working Pressure : (2.5 ± 1.5)MWC

Activated Carbon Filter Supplying, storing, handling, installation, testing & commissioning of Vertical FRP Activated Carbon Filter tested to 5.0 Kg/sqcm consisting of intial charge of media consisting (900mm bed depth of activated carbon of Iodine value 350-400 and support media), with frontals and manual multiport valve of 40 NB .Capacity : 3.5 LPS,Working Pressure : (2.5 ± 1.5)MWC MOC of vessel : FRP including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supply, installation, testing & commissioning of chlorine dosing system consisting of one FRP/ HDPE tank of 100 liters capacity with a positive displacement diaphragm Dosing pump with a variable flow rate of 0-12 LPH. The motor shall be suitable for operation at 240 V /one phase/ 50 Hertz supply. The pump shall be supplied complete with necessary poly propylene piping, valves, strainers & injection fittings for system to dose solution to the feed line. The pump shall be Asia LMI make. (Location : Pump Room for domestic water).including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Softener plant Providing, fixing, testing & commissioning of MS body water softener(flat ends 6mm thick & dished ends 8mm) with frontal piping valves, complete with Resin, Hydraulic Brine Injector, HDPE Brine tank of capacity one generation,Remi make mixing motor and all other accessories, including concrete foundation with cement plaster, complete as required (Location -Pump Room for domestic water).a) Softner for domestic water including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Input water Hardness 700 Mg/L ( Max )-Exact hardness will be as per tubewell water report. Output water Hardness 70 ppm Regeneration Period 12 Hrs. Operating Pressure 3.5 Kg. per sq.cm Test Pressure 6 Kg. Sq.cm. Capacity 3.5 LPS

Borewell automation System including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge a) Borewell automation panel 1 Each b) Liquid level Sensor - 2 Each c) Wire for sensor upto - 20 m d) pipe line upto 10m @ 50 dia. 1 job

Water transfer pumps Supplying, installing, testing & commissioning of horizontal / vertical centrifugal domestic water transfer pumps CI head & Base, SS-304 impeller along with motor, pressure guage with isolation cock, isolation valve, NRV on delivery line, isolation valve, stainer, with 100 lts pressure vessel.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Pumps shall be suitable for 415 ± 10% volts 3 phase 50 Hz A.C supply & shall be having the following requirement complete with foundation and associated civil works. Suction & Delivery Header - C.I Control Valve On suction and Delivery - Ball Valve Only (No Butterfly Valve Accepted). Flow Prevention - Only Check Valve Suction & delivery header including all pipes, suction & delivery sides valves, NRV, Pressure gauges & accessories complete. Flow Rate : 200 LPM (1 duty + 1 stand by) Head : 40 M, Tank depth = 4m + Horizontal Losses 15m + Verical building height = 14m + vertical losses = 5 m = 38m, say = 40M Min. Motor HP : 2.0 H.P. (Each) as per recommendation

Control panel for raw water 2 Each pumps for automation provision with cabling, contractor etc complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge . ( For pumps automation )

Providing and Fixing pressure switch with control cables (to controlled the transfer pumps ) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing and Fixing 50 dia Motorized valves with 24V supply complete.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge ( At both the riser pipe near the tanks at terrace level)

Providing and Fixing Float valves to control the motorized valves. ( For over head tanks) including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Sump Pumps Supply & Installation, testing and commissioning of centrifugal non clogging submersible sump pumps for plant room drainage. Pump capable of handling 25 mm dia soft solids. Motor suitable for 415 + 10% volts, 3 phase, 50 Hz AC Power supply. Pumps shall be suitable for automatic/manual operation (Overall depth of sump – 1.5 M). Submersible sump pump shall be provided with dry running protection. Inclusive of supporting arrangement for stationary type. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Two Each. of pump installed in one sump pit 1 working & 1 standby with automatic/manual operation as requireds. Waste Water Sump Pumps Flow rate : 2 LPS Head : 10 Rmts. Min. Motor HP : 2.0 (Each) Set of 2 pumps (1duty +1 stand by)

Control panel for raw water 2 Each pumps for automation provision with cabling, contractor etc complete. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge (For pumps automation)

Design, Supply, Installation and commissioning of 1 no. Prefabricated FRP made packaged Sewage treatment plant (STP) of 50 KLD on Johkasou Technology of Japan including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge. TYPE: Moving Bed Bio Reactor (MBBR) along with Anaerobic contact media treatment

TREATMENT PROCESS: (1) SEDIMENTATION AND SEPERATION CHAMBER: Sedimentation and separation chamber collects domestic waste water. It also has function to separate solid wastes from liquid waste based on their gravity. (2) ANAEROBIC CONTACT MEDIA CHAMBER: Waste water then flows into anaerobic media contact chamber from sedimentation and separation chamber. It contains organic material which is decomposed by anaerobic microorganism. On the other hand, nitrite and nitrate contained in the circulated water are converted into N2 gas, O2 and H2O by denitrification microorganisms. De-nitrification happen the water flow & contact 2nd time Anaerobic Media Chamber by Circulation system. (3) MOVING BED CHAMBER (AEROBIC) : Anaerobic process treatment water flows into moving bed chamber. Organic material contained waste water is decomposed by aerobic microorganism, and becomes simpler product. In this case the organic waste material is used for development of new cells (protoplasm) and converted to other materials such as carbon dioxide, water, and ammonia. Results of aerobic biological processes will also produce sludge which is suspended from treated water. (4) SEDIMENTATION CHAMBER: Sedimentation chamber has function as place of settled sludge which is resulted by biological processes in moving bed chamber. Settled sludge will be transferred to sedimentation and separation chamber. (5) DISINFECTANT CHAMBER: Disinfectant chamber serves as a place to put chlorine / disinfectant as a sterilization agent pathogenic microorganisms in the waste processed before discharged into the environment. (6) WATER CIRCULATION SYSTEM: Always water circulate inside treatment tank in spite of during no water flow into. Water keep moving and treating in the treatment tank. During long holiday or in case transfer pump be out of order, water should not go bad.

TREATEMENT PERFORmtANCE PH INPUT RANGE : 6.4-8.6 OUTPUT RANGE - 6-9 BOD (MG/L) INPUT RANGE : 300 OUTPUT RANGE -Less than 20 COD (MG/L) INPUT RANGE : 400 OUTPUT RANGE -Less than 50 TSS (MG/L) INPUT RANGE : 200 OUTPUT RANGE -Less than 30 OIL & GREASE (MG/L) INPUT RANGE : 80 OUTPUT RANGE -Less than 10 EXCLUSIONS

1. All Civil works are excluded from the scope, which are as under i. Raw sewage collection tank (RCC / PVC ) of suitable size, if required. ii. Foundation to establish the Packaged Sewage treatment Plant or excavated Pit in case it has to be kept under the ground. iii. Plant enclosure / plant room, if required iv. Treated water storage tank of suitable capacity, if needed. 2. Piping and fitting outside STP unit. 3. Raw sewage transfer pump if required. 4. Treated water transfer pump if required. 5. Necessary panel and electric connections

FIRE FIGHTING SYSTEM PUMPS Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required :including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge. Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conformingto IS 1520.

Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conformingto IS-325. M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. 2280 lpm at 56 m Head

Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conformingto IS 1520. Suitable HP, 1500 RPM water cooled with radiator, diesel engine conformingto relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge .2280 lpm at 56 m Head

Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conformingto IS : 1520. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conformingto IS : 325. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge 180 lpm at 56 m Head

CONTROL PANELS Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and veRmtin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth teRmtinals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required : .including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conformingto IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

150 mm. Dia

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conformingto IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

25 mm dia

32 mm dia

40mm dia

50 mm dia

65 mm dia

80 mm dia

100 mm dia

150 mm dia

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conformingto IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Single headed Gunmetal

Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conformingto IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required : including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Single headed Gunmetal

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conformingto IS 13095 of following sizes as required : including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

100 mm dia

150 mm dia

Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conformingto IS 780 of following sizes as required : including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

40 mm dia

Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete required. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing, installation, testing and commissioning of non-return valve of following sizes confiRmting to IS:5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

150 mm dia

Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

150 mm dia

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conformingto IS 636 (type-A) as required : including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Gun Metal

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conformingto IS 884 complete with the following as required; -20 mm nominal internal dia water hose theRmtoplastic (Textile reinforced) type -2 as per IS: 12585 -20 mm nominal internal dia gun metal globe valve & nozzle. -Drum and brackets for fixing the equipmets on wall. -Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diaRmt size nozzle conformingto IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Gun Metal

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conformingto IS 904 as required :including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

2 way - 100 mm dia M.S. Pipe

4 way - 150 mm dia M.S. Pipe

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Pendent Sprinkler

Upright Sprinkler

Horizontal side wall sprinkler

Concealed sprinkler

Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

100 mm dia

Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alaRmt, bronze seat clapper, clapper aRmt and hydraulically driven mechanical gong bell to sound continuous alaRmt when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required :including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

100 mm dia

150 mm dia

Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required.including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Supply and installation of ABC powder stored pressure type portable fire extinguisher ISI marked 15683- 2006 & ISO - 9001, complete including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge as required capacity - 6 kg

Supply and installation of CO2 type fire extinguisher ISI marked steel body 15683- 2006 & ISO - 9001, complete as required capacity - 4.5 kg including carriage of material by mechanically & manual upto all lead & lift and as per direction of Engineer incharge

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / heavy class PVC conduit having wall thickness minimum 2 mm, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required..Make :-Anchor (Roma classic ),L&T(Entice),Legrand(Myrius) or its equivalent as approved by Er-In-Charge

Group B

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / heavy class PVC conduit having wall thickness minimum 2 mm, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.FRLS PVC insulated copper conductor single core cable etc as required.Make :-Anchor (Roma classic ),L&T(Entice),Legrand(Myrius) or its equivalent as approved by Er-In-Charge

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.Make:-Plaza,KEI,Finolex or its equivalent as approved by Er-In-Charge

3 x 4 sq. mm

Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit asrequired.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 10 sq. mm + 1 X 6 sq. mm earth wire

4 X 6 sq. mm + 2 X 6 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unaRmtored telephone cable in the existing surface/ recessed steel/ PVC conduit

TV cable in existing conduiting: Supply & drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of following sizes of heavy class PVC conduit having wall thickness 2.0mm along with accessories insurface/recess including painting in case of surface conduit, or cutting the walland making good the same in case of recessed conduit as required.Diplast/BEC/Polyfit.or its equivalent as approved by Er-In-Charge

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Telephone socket outlet

TV socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing of modular Blanking plate on the existing modular plate & switch box including connections but excluding modular plate etc. as reqd.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

1 or 2 Module (75mmX75mm)

3 Module (100mmX75mm)

4 Module (125mmX75mm)

6 Module (200mmX75mm)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

6 way , Double door

8 way , Double door

12 way , Double door

16 way , Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

4 way (4 + 12), Double door

6 way (4 + 18), Double door

8 way (4 + 24), Double door

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is noRmtally used where 3 phase outlets are required.)

8 way (4 + 24), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Triple pole

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying & Fixing of following rating four pole (three phase and neutral) 415 volts, Residual Current Circuit Breaker (RCCB), having a sensitivity current upto 300 milli-amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supplying and fixing 30 A/32A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A/32A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Providing and fixing M.V. danger notice plate of 200x150mm ,made of mild steel at least 2mm thick ,vitreous enameled white on both sides ,and with inscription in single red colour on front side as required.

Supplying, fabricating and installing following size of perforated pre painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joints with connectors, suspended from the ceiling with M.S. suspenders including bolt & nuts, painting suspenders as required.

150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 50 mm depth X 1.6 mm thickness

Supplying, fabricating and installing following size of perforated pre painted M.S. cable trays bends with perforation not more than 17.5%, in convenient sections, joints with connectors, suspended from the ceiling with M.S. suspenders including bolt & nuts, painting suspenders as required.

150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 50 mm depth X 1.6 mm thickness

Supplying, fabricating and installing following size of perforated pre painted M.S. cable trays tees with perforation not more than 17.5%, in convenient sections, joints with connectors, suspended from the ceiling with M.S. suspenders including bolt & nuts, painting suspenders as required.

150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 50 mm depth X 1.6 mm thickness

Supplying, fabricating and installing following size of perforated pre painted M.S. cable trays cross members with perforation not more than 17.5%, in convenient sections, joints with connectors, suspended from the ceiling with M.S. suspenders including bolt & nuts, painting suspenders as required.

150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 50 mm depth X 1.6 mm thickness

Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 Each. blades, 30 cm long down rod, 2 Each. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.

1 run of cable

2 run of cable

3 run of cable

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Each. 3 pin 5/6 A modular socket outlet and 2 Each. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings)..

Supply, installation, testing and commissioning of following ennealed tinned electric grade copper conductor PVC insulated and PVC sheathed jelly filled aRmtoured telecommunication cable as per specifications.

5 pair aRmtoured riser cable of 0.60 mm dia copper conductor

10 pair aRmtoured riser cable of 0.60 mm dia copper conductor

20 pair aRmtoured riser cable of 0.60 mm dia copper conductor

Supply and installation, testing and commissioning following size KRONE make telephone tag block in lockable 16 gauge sheet medium duity PVC enclosure complete as required.

5 pair Krone type tag block

10 pair Krone type tag block

20 pair Krone type tag block

50 pair Krone type tag block

Supply and Erecting modular type computer jack RJ 45 with screwless connector approved make with mounting plate and box with wiring connections complete.

Supplying & fixing of 6 Core - Optic fiber cable OM4 - Unitube Corrugated steel tape Optical Fiber Cable as per IEC 60794-1

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)

Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 Each. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.

SITC of 22 Watt LED Linear Metal Construction commercial batten fitting with fuse protection suitable for Polycarbonate diffuser & aluminium heat sink complete suitable for both surface & suspended Mounting, complete in all respect 2200 system lumens PF>0.95, THD<10%, CRI>80, Sheet Thickness 0.8mm, Average Life 40000hrs @L70 with fixing clamps, nut, bolts and fixing arrangement with both side of existing MS pipe (in case of hanging )complete accessories all respect and as directed by engineer in charge., Make PhilipsBN 021 LED25S 6500 PSU GR S1 or eqivalent as per approved make

SITC of Downlighter 15 watt/1600 lumens suitable for Polycarbonate diffuser & aluminium heat sink complete suitable for recessed Mounting, complete in all respect 2000 system lumens PF>0.95, THD<10%, CRI>80, Sheet Thickness 0.8mm, Average Life 40000hrs @L70 with fixing clamps, nut, bolts and fixing arrangement with both side of existing MS pipe (in case of hanging )complete accessories all respect and as directed by engineer in charge., Make Philips DN 394B LED16S-6500 PSU WH or eqivalent as per approved make

SITC of Downlighter 22 watt/2000 lumens suitable for Polycarbonate diffuser & aluminium heat sink complete suitable for recessed Mounting, complete in all respect 2000 system lumens PF>0.95, THD<10%, CRI>80, Sheet Thickness 0.8mm, Average Life 40000hrs @L70 with fixing clamps, nut, bolts and fixing arrangement with both side of existing MS pipe (in case of hanging )complete accessories all respect and as directed by engineer in charge., Make Philips DN 395B LED20S-6500 PSU WH or eqivalent as per approved make

SITC of Mirror Light 10 watt/1150 lumens suitable for Polycarbonate diffuser & aluminium heat sink complete suitable for Surface Mounting, complete in all respect 1150 system lumens PF>0.95, THD<10%, CRI>80, Sheet Thickness 0.8mm, Average Life 40000hrs @L70 with fixing clamps, nut, bolts and fixing arrangement with both side of existing MS pipe (in case of hanging )complete accessories all respect and as directed by engineer in charge., Make Philips BN 021 LED10S- 6500 PSU GR S1 or eqivalent as per approved make

SITC of LED indoor surface downlighter suitable for general lighting. Luminaire should have polycarbonate cover with diffused optics. The luminaire should have CRI > 80 and CCT of 6500K. The luminaire shall be compliant with IP20 classification.The fixture should have a minimum system efficacy of 110 lumen/Watt and a minimum system lumen output of approx 1650 lumens and maximum system wattage of 15 Watts.power factor >0.95 , THD <10%. he fixture should comply with the paraRmts as per IS10322. The LED driver should comply to IEC61000-3-2. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above paraRmts. Similar to PHILIPS make SM251C LED16S- 6500 PSU WH or eqivalent as per approved make.

SITC of Downlighter 42 watt/4000 lumens suitable for Polycarbonate diffuser & aluminium heat sink complete suitable for recessed Mounting, complete in all respect 4000 system lumens PF>0.95, THD<10%, CRI>80, Sheet Thickness 0.8mm, Average Life 40000hrs @L70 with fixing clamps, nut, bolts and fixing arrangement with both side of existing MS pipe (in case of hanging )complete accessories all respect and as directed by engineer in charge., Make Philips RS271B LED40/830 PSD WB WH or eqivalent as per approved make

SITC of Exhaust fan 300 mm sweep metal body with 50 HZ 230 volt ac complete with all respective accessories. HAVELLS CAT Ventil Air - DB or equivalent

Supply, Installation, Testing & Commissioning of 6.0 Rmt high G.I octagonal pole with single aRmt (Above Ground Level) with single aRmt of suitable length with inbuilt junction box with 10A SP MCB, connectors for incoming/outgoing cable connection and 300mm x 300mm x 20 mm thick base plate complete in all respect including making CC foundation in 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size) of minimum size as per manufacturer design , excavation & refilling complete with provision of DWC - HDPE pipe of 1 Rmt long inside the foundation for UG cable entry & teRmtination of cable with gland / thimble including 4 Each. heavy duty foundation nut bolts with suitable length complete as required.

SITC of Aesthetically designed 65W LED street light luminaire, housing shall be of corrosion free, pressure die cast aluminium, comprising of polycarbonate cover or better, LED chips,mounted on suitable designed aluminium heat sink with high theRmtal conductivity for better heat dissipation, fitted with integral drivers, stainless steel toggle clips & neoprene/ synthetic rubber gasket lining complying to IP 65/66 class of protection including providing suitable mounting arrangement for installation on existing GI Pole including connection with 1.5 sq. mm PVC insulated, copper conductor, single core cable and earthing etc as required. Make & Model: Philips model no -Smart Bright Street, BRP409 LED 065 CW HE MR FG S1 PSU GR or equivalent in other approved makes.

SITC of LED based post top, housing made up of Pressure Die Cast Housing / UV protected Poly carbonate diffuser and embossed brand name/logo name of manufacturer. The fixture should have a minimum system efficacy of 110 lumen/Watt and a minimum system lumen output of 5000 lumens and maximum system wattage of 45Watts.The fixture shall have a CRI of minimum 70. The fixture shall be designed for a system life of 50,000 hours @70% lumen maintenance. Ingress Protection of IP66 (lamp and gear Compartment) and Mechanical Impact Resistance Rating of IK 10.The fixture driver should have an operating voltage range of 120-277 V, surge 4KV, PF >0.9 , THD<10% and SDCM<5. (Similar to Philips Make Model No. BGP161 LED2500/NW PSU 220-240V 7043 IN or equivalent in other approved makes.)

SITC of 9 Watt LED Spike Light Fitting (HAVELLS_LYCUSSPS9WLED730PSYMBOTG or equivalent in other makes)

SITC of 8 Watt LED BOLLARD Light Fitting ( HAVELLS_CONE NXG - IP65_CAT. NO.-CONENXGBLS8WLED830PSYMTOPCM (1.0 M) or equivalent in other makes)

MAIN LT PANEL -Supplying, fixing, testing & commissioning of 415V ,3Phase 50Hz, 4wire system,sheet steel clad,dust & veRmtin proof cubical & outdoor type floor mounted, free standing Main Distribution Board with IP - 42 protection, compartmentalized design and fabricated out of 2mm/1.6mm CRCA sheet steel complete with aluminium Bus Bars, Providing & Fixing of base plate /channel, P/F the following Switchgears,complete with earth Bus Bar throughout the length of the panel,teRmtinal arrangement for incomings/outgoings cables and also outgoing teRmtinations for various sizes of cables,the incoming and outgoing feeders shall be accommodated in a modular multi-tier arrangement,adequate size bus duct/cable alley, Sign writing,Painting,Earthing,Numbering,Danger plate etc. Complete as requried,numbering, danger plate etc. complete as required as per specification and drawing. All MCCBs Shall be Ics=100%Icu. Make: Legrand(Adlec) or eqivalent as per approved make list and as direction by engneer in charge. PTTA Panel

INCOMER:1 (FROM 500 KVA CSS) 1 Each. 800A 415V, Ics=50KA, 4P ACB ( with microprocessor based release) with U/V release and shunt release with the following :- 1 Each. Digital type multi function Rmts (V+A+Hz) with cast resin CTs 800/5A. 1 Set of phase indicating lamp with MCB Shunt Trip Coil Breaker ON/OFF/TRIP indicating lamps with control fuses.

INCOMER:2 (FROM 250 KVA DG SET-1) 1 Each. 400A 415V, Ics=50KA, 4P MCCB+Contactor with TM release having adjustable O/L, S/C protection. 1 Each. Digital type multi function Rmts (V+A+Hz) with cast resin CTs 400/5A. 1 Set of phase indicating lamp with MCB

INCOMER:3 (FROM 250 KVA DG SET-2) 1 Each. 400A 415V, Ics=50KA, 4P MCCB+Contactor with TM release having adjustable O/L, S/C protection. 1 Each. Digital type multi function Rmts (V+A+Hz) with cast resin CTs 400/5A. 1 Set of phase indicating lamp with MCB

BUS COUPLER 1 Each. 400A 415V, Ics=50KA, 4P MCCB+Contactor with TM release having adjustable O/L, S/C protection. - 1 Set Electrical & Mechanical Interlocking as per SLD BUSBAR 1000A TPN Bus bar of aluminimum alloy. - 1 Set 630A TPN Bus bar of aluminimum alloy. - 1 Set

OUTGOINGS - 250 A, TPN,36KA, MCCB – 5 N.o. - 200 A, TPN,36KA, MCCB – 1 N.o. - 160 A, TPN,36KA, MCCB – 1 N.o. - 125 A, TPN,36KA, MCCB – 1 N.o - 100 A, TPN,25A, MCCB – 12 N.o. - 63 A, TPN,25A, MCCB – 1 N.o. - 63 A, TPN,10KA, MCB – 11 N.o. - 40 A, TPN,10KA, MCB – 1 N.o.

CAPACITOR SECTION (200 KVAR) SECTION –1 INCOMER 400 A, 3 Pole, MCCB with U/V release and shunt release with a minimum of 5 NO and 5NC auxiliary contacts and with following :- RmtING & CONTROLS - breaker ON/OFF/TRIP indicating lamps with control fuses. - shunt trip coil Automatic Power Factor correction system with following : 1 number solid state Binary mode automatic power factor sensing and correction relay complete in all respects ( 10 stages)

The APFCR relay will be from the DUAL SOURCE MULTIFUNCTION Rmt FROM TRINITY- MODEL- 'POWER CUBE'.The relay will have different set points for the mains supply & generator supply. LT Power Capacitor Banks along with contactors and HRC fuses as detailed below: 1 number TP Contactors of 100 A Capacity with MCCB – 50 kVAR 5 number TP Contactors of 63 A Capacity with MCCB – 25 kVAR 2 number TP Contactors of 40 A Capacity with MCCB – 10 kVAR 1 number TP Contactors of 32 A Capacity with MCCB – 5 kVAR

Supplying, fixing, testing & commissioning of 415V ,3Phase 50Hz, 4wire system,sheet steel clad,dust & veRmtin proof cubical & indoor type floor mounted, free standing Main Distribution Board with IP - 42 protection, compartmentalized design and fabricated out of 2mm/1.6mm CRCA sheet steel complete with aluminium Bus Bars, Providing & Fixing of base plate /channel, P/F the following Switchgears,complete with earth Bus Bar throughout the length of the panel,teRmtinal arrangement for incomings/outgoings cables and also outgoing teRmtinations for various sizes of cables,the incoming and outgoing feeders shall be accommodated in a modular multi-tier arrangement,adequate size bus duct/cable alley, Sign writing,Painting,Earthing,Numbering,Danger plate etc. Complete as requried,numbering, danger plate etc. complete as required as per specification and drawing. All MCCBs Shall be Ics=100%Icu. Make: Legrand(Adlec) or eqivalent as per approved make list and as direction by engneer in charge. PTTA Panel

INCOMER: 1 Each. 100A 415V, Ics=25KA, 4P MCCB TM release having adjustable O/L, S/C protection. 1 Each. Digital type multi function Rmts (V+A+Hz) with cast resin CTs 100/5A. 1 Set of phase indicating lamp with MCB BUSBAR 150A TPN Bus bar of aluminimum alloy. OUTGOING 63 A, TPN,10KA, MCB – 3 N.o. 40 A, TPN,10KA, MCB – 1 N.o. 40 A, DP,10KA, MCB – 2 N.o.

Supplying, fixing, testing & commissioning of 415V ,3Phase 50Hz, 4wire system,sheet steel clad,dust & veRmtin proof cubical & indoor type floor mounted, free standing Main Distribution Board with IP - 42 protection, compartmentalized design and fabricated out of 2mm/1.6mm CRCA sheet steel complete with aluminium Bus Bars, Providing & Fixing of base plate /channel, P/F the following Switchgears,complete with earth Bus Bar throughout the length of the panel,teRmtinal arrangement for incomings/outgoings cables and also outgoing teRmtinations for various sizes of cables,the incoming and outgoing feeders shall be accommodated in a modular multi-tier arrangement,adequate size bus duct/cable alley, Sign writing,Painting,Earthing,Numbering,Danger plate etc. Complete as requried,numbering, danger plate etc. complete as required as per specification and drawing. All MCCBs Shall be Ics=100%Icu. Make: Legrand(Adlec) or eqivalent as per approved make list and as direction by engneer in charge. PTTA Panel

INCOMER: 1 Each. 63A 415V, Ics=25KA, 4P MCCB TM release having adjustable O/L, S/C protection. 1 Each. Digital type multi function Rmts (V+A+Hz) with cast resin CTs 63/5A. 1 Set of phase indicating lamp with MCB BUSBAR 100A TPN Bus bar of aluminimum alloy. OUTGOING 32 A, TPN,10KA, MCB – 1 N.o. 40 A, DP,10KA, MCB – 3 N.o. 32 A, DP,10KA, MCB – 6 N.o.

Supplying, fixing, testing & commissioning of 415V ,3Phase 50Hz, 4wire system,sheet steel clad,dust & veRmtin proof cubical & indoor type floor mounted, free standing Main Distribution Board with IP - 42 protection, compartmentalized design and fabricated out of 2mm/1.6mm CRCA sheet steel complete with aluminium Bus Bars, Providing & Fixing of base plate /channel, P/F the following Switchgears,complete with earth Bus Bar throughout the length of the panel,teRmtinal arrangement for incomings/outgoings cables and also outgoing teRmtinations for various sizes of cables,the incoming and outgoing feeders shall be accommodated in a modular multi-tier arrangement,adequate size bus duct/cable alley, Sign writing,Painting,Earthing,Numbering,Danger plate etc. Complete as requried,numbering, danger plate etc. complete as required as per specification and drawing. All MCCBs Shall be Ics=100%Icu. Make: Legrand(Adlec) or eqivalent as per approved make list and as direction by engneer in charge. PTTA Panel

INCOMER: 1 Each. 100A 415V, Ics=25KA, 4P MCCB TM release having adjustable O/L, S/C protection. 1 Each. Digital type multi function Rmts (V+A+Hz) with cast resin CTs 100/5A. 1 Set of phase indicating lamp with MCB BUSBAR 150A TPN Bus bar of aluminimum alloy. OUTGOING 32 A, TPN,10KA, MCB – 1 N.o. 40 A, DP,10KA, MCB – 3 N.o. 32 A, DP,10KA, MCB – 12 N.o.

Supplying, fixing, testing & commissioning of 415V ,3Phase 50Hz, 4wire system,sheet steel clad,dust & veRmtin proof cubical & indoor type floor mounted, free standing Main Distribution Board with IP - 42 protection, compartmentalized design and fabricated out of 2mm/1.6mm CRCA sheet steel complete with aluminium Bus Bars, Providing & Fixing of base plate /channel, P/F the following Switchgears,complete with earth Bus Bar throughout the length of the panel,teRmtinal arrangement for incomings/outgoings cables and also outgoing teRmtinations for various sizes of cables,the incoming and outgoing feeders shall be accommodated in a modular multi-tier arrangement,adequate size bus duct/cable alley, Sign writing,Painting,Earthing,Numbering,Danger plate etc. Complete as requried,numbering, danger plate etc. complete as required as per specification and drawing. All MCCBs Shall be Ics=100%Icu. Make: Legrand(Adlec) or eqivalent as per approved make list and as direction by engneer in charge. PTTA Panel

INCOMER: 1 Each. 100A 415V, Ics=25KA, 4P MCCB TM release having adjustable O/L, S/C protection. 1 Each. Digital type multi function Rmts (V+A+Hz) with cast resin CTs 100/5A. 1 Set of phase indicating lamp with MCB BUSBAR 150A TPN Bus bar of aluminimum alloy. OUTGOING 32 A, TPN,10KA, MCB – 1 N.o. 40 A, DP,10KA, MCB – 3 N.o. 32 A, DP,10KA, MCB – 12 N.o.

Supplying, fixing, testing & commissioning of 415V ,3Phase 50Hz, 4wire system,sheet steel clad,dust & veRmtin proof cubical & indoor type floor mounted, free standing Main Distribution Board with IP - 42 protection, compartmentalized design and fabricated out of 2mm/1.6mm CRCA sheet steel complete with aluminium Bus Bars, Providing & Fixing of base plate /channel, P/F the following Switchgears,complete with earth Bus Bar throughout the length of the panel,teRmtinal arrangement for incomings/outgoings cables and also outgoing teRmtinations for various sizes of cables,the incoming and outgoing feeders shall be accommodated in a modular multi-tier arrangement,adequate size bus duct/cable alley, Sign writing,Painting,Earthing,Numbering,Danger plate etc. Complete as requried,numbering, danger plate etc. complete as required as per specification and drawing. All MCCBs Shall be Ics=100%Icu. Make: Legrand(Adlec) or eqivalent as per approved make list and as direction by engneer in charge. PTTA Panel

INCOMER: 1 Each. 100A 415V, Ics=25KA, 4P MCCB TM release having adjustable O/L, S/C protection. 1 Each. Digital type multi function Rmts (V+A+Hz) with cast resin CTs 100/5A. 1 Set of phase indicating lamp with MCB BUSBAR 150A TPN Bus bar of aluminimum alloy. OUTGOING 63 A, TPN,10KA, MCB – 2 N.o. 40 A, DP,10KA, MCB – 2 N.o. 32 A, DP,10KA, MCB – 6 N.o.

Supplying, fixing, testing & commissioning of 415V ,3Phase 50Hz, 4wire system,sheet steel clad,dust & veRmtin proof cubical & indoor type floor mounted, free standing Main Distribution Board with IP - 42 protection, compartmentalized design and fabricated out of 2mm/1.6mm CRCA sheet steel complete with aluminium Bus Bars, Providing & Fixing of base plate /channel, P/F the following Switchgears,complete with earth Bus Bar throughout the length of the panel,teRmtinal arrangement for incomings/outgoings cables and also outgoing teRmtinations for various sizes of cables,the incoming and outgoing feeders shall be accommodated in a modular multi-tier arrangement,adequate size bus duct/cable alley, Sign writing,Painting,Earthing,Numbering,Danger plate etc. Complete as requried,numbering, danger plate etc. complete as required as per specification and drawing. All MCCBs Shall be Ics=100%Icu. Make: Legrand(Adlec) or eqivalent as per approved make list and as direction by engneer in charge. PTTA Panel

INCOMER: 1 Each. 200A 415V, Ics=36KA, 4P MCCB TM release having adjustable O/L, S/C protection. 1 Each. Digital type multi function Rmts (V+A+Hz) with cast resin CTs 200/5A. 1 Set of phase indicating lamp with MCB BUSBAR 250A TPN Bus bar of aluminimum alloy. OUTGOING 100 A, TPN,25KA, MCCB – 3 N.o. 63 A, TPN,10KA, MCB – 14 N.o. 40 A, DP,10KA, MCB – 2 N.o.

Supplying, fixing, testing & commissioning of 415V ,3Phase 50Hz, 4wire system,sheet steel clad,dust & veRmtin proof cubical & indoor type floor mounted, free standing Main Distribution Board with IP - 42 protection, compartmentalized design and fabricated out of 2mm/1.6mm CRCA sheet steel complete with aluminium Bus Bars, Providing & Fixing of base plate /channel, P/F the following Switchgears,complete with earth Bus Bar throughout the length of the panel,teRmtinal arrangement for incomings/outgoings cables and also outgoing teRmtinations for various sizes of cables,the incoming and outgoing feeders shall be accommodated in a modular multi-tier arrangement,adequate size bus duct/cable alley, Sign writing,Painting,Earthing,Numbering,Danger plate etc. Complete as requried,numbering, danger plate etc. complete as required as per specification and drawing. All MCCBs Shall be Ics=100%Icu. Make: Legrand(Adlec) or eqivalent as per approved make list and as direction by engneer in charge. PTTA Panel

INCOMER: 1 Each. 100A 415V, Ics=25KA, 4P MCCB TM release having adjustable O/L, S/C protection. 1 Each. Digital type multi function Rmts (V+A+Hz) with cast resin CTs 100/5A. 1 Set of phase indicating lamp with MCB BUSBAR 150A TPN Bus bar of aluminimum alloy. OUTGOING 63 A, TPN,10KA, MCB – 2 N.o. 32 A, TPN,10KA, MCB – 2 N.o. 40 A, DP,10KA, MCB – 2 N.o.

Supplying, fixing, testing & commissioning of 415V ,3Phase 50Hz, 4wire system,sheet steel clad,dust & veRmtin proof cubical & indoor type floor mounted, free standing Main Distribution Board with IP - 42 protection, compartmentalized design and fabricated out of 2mm/1.6mm CRCA sheet steel complete with aluminium Bus Bars, Providing & Fixing of base plate /channel, P/F the following Switchgears,complete with earth Bus Bar throughout the length of the panel,teRmtinal arrangement for incomings/outgoings cables and also outgoing teRmtinations for various sizes of cables,the incoming and outgoing feeders shall be accommodated in a modular multi-tier arrangement,adequate size bus duct/cable alley, Sign writing,Painting,Earthing,Numbering,Danger plate etc. Complete as requried,numbering, danger plate etc. complete as required as per specification and drawing. All MCCBs Shall be Ics=100%Icu. Make: Legrand(Adlec) or eqivalent as per approved make list and as direction by engneer in charge. PTTA Panel

INCOMER: 1 Each. 160A 415V, Ics=36KA, 4P MCCB TM release having adjustable O/L, S/C protection. 1 Each. Digital type multi function Rmts (V+A+Hz) with cast resin CTs 160/5A. 1 Set of phase indicating lamp with MCB BUSBAR 200A TPN Bus bar of aluminimum alloy. OUTGOING 63 A, TPN,10KA, MCB – 7 N.o. 40 A, TPN,10KA, MCB – 2 N.o. 32 A, TPN,10KA, MCB – 3 N.o. 40 A, DP,10KA, MCB – 3 N.o.

Supplying, fixing, testing & commissioning of 415V ,3Phase 50Hz, 4wire system,sheet steel clad,dust & veRmtin proof cubical & indoor type floor mounted, free standing Main Distribution Board with IP - 42 protection, compartmentalized design and fabricated out of 2mm/1.6mm CRCA sheet steel complete with aluminium Bus Bars, Providing & Fixing of base plate /channel, P/F the following Switchgears,complete with earth Bus Bar throughout the length of the panel,teRmtinal arrangement for incomings/outgoings cables and also outgoing teRmtinations for various sizes of cables,the incoming and outgoing feeders shall be accommodated in a modular multi-tier arrangement,adequate size bus duct/cable alley, Sign writing,Painting,Earthing,Numbering,Danger plate etc. Complete as requried,numbering, danger plate etc. complete as required as per specification and drawing. All MCCBs Shall be Ics=100%Icu. Make: Legrand(Adlec) or eqivalent as per approved make list and as direction by engneer in charge. PTTA Panel

INCOMER: 1 Each. 250A 415V, Ics=36KA, 4P MCCB TM release having adjustable O/L, S/C protection. 1 Each. Digital type multi function Rmts (V+A+Hz) with cast resin CTs 250/5A. 1 Set of phase indicating lamp with MCB BUSBAR 300A TPN Bus bar of aluminimum alloy. OUTGOING 100 A, TPN,25KA, MCCB – 2 N.o. 63 A, TPN,10KA, MCB – 4 N.o. 40 A, TPN,10KA, MCB – 1 N.o.

Supplying, fixing, testing & commissioning of 415V ,3Phase 50Hz, 4wire system,sheet steel clad,dust & veRmtin proof cubical & indoor type floor mounted, free standing Main Distribution Board with IP - 42 protection, compartmentalized design and fabricated out of 2mm/1.6mm CRCA sheet steel complete with aluminium Bus Bars, Providing & Fixing of base plate /channel, P/F the following Switchgears,complete with earth Bus Bar throughout the length of the panel,teRmtinal arrangement for incomings/outgoings cables and also outgoing teRmtinations for various sizes of cables,the incoming and outgoing feeders shall be accommodated in a modular multi-tier arrangement,adequate size bus duct/cable alley, Sign writing,Painting,Earthing,Numbering,Danger plate etc. Complete as requried,numbering, danger plate etc. complete as required as per specification and drawing. All MCCBs Shall be Ics=100%Icu. Make: Legrand(Adlec) or eqivalent as per approved make list and as direction by engneer in charge. PTTA Panel

INCOMER: 1 Each. 250A 415V, Ics=36KA, 4P MCCB TM release having adjustable O/L, S/C protection. 1 Each. Digital type multi function Rmts (V+A+Hz) with cast resin CTs 250/5A. 1 Set of phase indicating lamp with MCB BUSBAR 300A TPN Bus bar of aluminimum alloy. OUTGOING 100 A, TPN,25KA, MCCB – 1 N.o. 63 A, TPN,10KA, MCB – 6 N.o. 40 A, TPN,10KA, MCB – 1 N.o.

EXTERNAL LIGHTING PILLAR- OUTDOOR TYPE -Supplying, fixing, testing & commissioning of 415V ,3Phase 50Hz, 4wire system,sheet steel clad,dust & veRmtin proof cubical & outdoor type floor mounted, free standing Main Distribution Board with IP - 42 protection, compartmentalized design and fabricated out of 2mm/1.6mm CRCA sheet steel complete with aluminium Bus Bars, Providing & Fixing of base plate /channel, P/F the following Switchgears,complete with earth Bus Bar throughout the length of the panel,teRmtinal arrangement for incomings/outgoings cables and also outgoing teRmtinations for various sizes of cables,the incoming and outgoing feeders shall be accommodated in a modular multi-tier arrangement,adequate size bus duct/cable alley, Sign writing,Painting,Earthing,Numbering,Danger plate etc. Complete as requried,numbering, danger plate etc. complete as required as per specification and drawing. All MCCBs Shall be Ics=100%Icu. Make: Legrand(Adlec) or eqivalent as per approved make list and as direction by engneer in charge. PTTA Panel

INCOMER FROM MAIN LT PANEL 1*40A TPN ,10KA,MCB+ELCB (30MA) RmtING & INDICATION 1 sets of phase indicating lamps 1 sets of VoltRmt (0-500V) with VSS Each with 3 Each. 2A SP MCBs Each 1 Sets of Breaker ON-OFF-TRIP, BUS BAR as per SLD:- 1 Sets of 100A, TPN Aluminum bus bars with colour coded sleeves. OUTGOINGS as per SLD 40 A,TP,10KA, Contactor -1 outgoings Timer 10/16/25/32 A,SP,10KA, MCB,- 18 outgoings NOTE:Any Item necessary for the completion of the system but not mentioned in the BOQ shall be included by the supplier

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Rmt long etc. with charcoal/ coke and salt as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Rmt long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm copper strip at 0.50 Rmt below ground as strip earth electrode, including connection/teRmtinating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 Rmt below ground as strip earth electrode, including connection/ teRmtinating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)

Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 Each. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.

Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Upto 35 sq. mm

Above 35 sq. mm and upto 95 sq. mm

Above 95 sq. mm and upto 185 sq. mm

Above 185 sq. mm and upto 400 sq. mm

Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal foRmtation including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Upto 35 sq. mm

Above 35 sq. mm and upto 95 sq. mm

Above 95 sq. mm and upto 185 sq. mm

Above 185 sq. mm and upto 400 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe/existing open trence/as required.

Upto 35 sq. mm

Above 35 sq. mm and upto 95 sq. mm

Above 95 sq. mm and upto 185 sq. mm

Above 185 sq. mm and upto 400 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.

Upto 35 sq. mm (clamped with 1mm thick saddle

Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)

Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)

Supplying and making end teRmtination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV

2 X 6 sq. mm (19mm)

2 X 10 sq. mm (19mm)

3½ X 35 sq. mm (32mm)

3½ X 50 sq. mm (35mm)

3½ X 70 sq. mm (38mm)

3½ X 95 sq. mm (38mm)

3½ X 150 sq. mm (45mm)

3½ X 185 sq. mm (57mm)

3½ X 240 sq. mm (62mm)

4 X 10 sq. mm (25mm)

4 X 16 sq. mm (28mm)

4 X 25 sq. mm (28mm)

Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc. as required.

100 mm dia

150 mm dia

300 mm dia

Supplying and laying of following size DWC HDPE pipe ISI markedalong with all accessories like socket, bend, couplers etc. conformingto IS 14930, Part II complete with fitting and cutting,jointing etc.direct in ground (75 cm below ground level) includingexcavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

63 mm dia (OD-63 mm & ID-51 mm nominal)

Supplying and making indoor cable end jointing with cast resin compound, including lugs and other jointing materials, for following size of 3 core, XLPE aluminium conductor cable of 11 kV grade as per IS 7098 (Part-2) 1985 with the latest ammendments of following sizes as required

Supplying and making outdoor cable end teRmtination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required.

Supply of following sizes of XLPE insulated Aluminum ARmtoured cable, overall PVC sheathed 1.1 KV grade cables conformingto relevant IS code and technical specifications.

2CX6 SqmM AL ARmtOURD CABLE

2CX10 SqmM AL ARmtOURD CABLE

4CX10 SqmM AL ARmtOURD CABLE

4CX16 SqmM AL ARmtOURD CABLE

4CX25 SqmM AL ARmtOURD CABLE

3.5CX35 SqmM AL ARmtOURD CABLE

3.5CX70 SqmM AL ARmtOURD CABLE

3.5CX95 SqmM AL ARmtOURD CABLE

3.5CX150 SqmM AL ARmtOURD CABLE

3.5CX185 SqmM AL ARmtOURD CABLE

3.5CX240 SqmM AL ARmtOURD CABLE

Supply of following sizes of XLPE insulated Copper ARmtoured cable, overall PVC sheathed 1.1 KV grade cables conformingto relevant IS code and technical specifications.

2CX 2.5 SqmM Cu ARmtOURD CABLE

2CX 4 SqmM Cu ARmtOURD CABLE

2CX 6 SqmM Cu ARmtOURD CABLE

Supplying of following sizes of XLPE aluminium conductor, corss linked polythylene, individual core screwed, flat steel strip aRmtoured, PVC sheathed cable of 11KV grade (earthed) comfoRmting to IS: 7098 (Part 2),with uptodate ammendment complete as required.

3 C x 120 Sq.mm XLPE HT cable (Earthed)

Supplying & laying 1.1 kv grade ISI marked synthetic rubber mats as per specifications of chief electrical inspectorate.

Supplying & fixing of shock treatment chart printed in hindi and english fitted in wooden frame and glass at front side and hard board at back side.

Supplying & fixing in position 1.1 kv rubber hand gloves.

Supplying of first aid box as approved by St. John Ambulance Brigade/Indian Red Cross conformingto IS : 2217 - 1963.

Supplying of basic Electrical and mechanical maintenance tool kit as per direction of engineer In charge.

Supplying, receiving, storing, inspection, handling, assembling and installation in correct aligned position, effecting proper connections, testing and commissioning of Outdoor type package substation for continuous rating of 500 KVA complete with Step Down, 11/0.433 KV, OIL Type (ONAN), OFF load tap changer transfoRmter, in different compartments having 4 mm thick base and 2 mm thick wall of Each compartment with IP 54 for HT & LT compartment and IP 23 for transfoRmter compartment, with naturally cooled type canopy (Hot Galvanized Steel), power pack of suitable capacity and of following specifications confiRmting to latest IS-Code. The losses of the TransfoRmter should be as per latest ECBC code. (PSS should have fully type tested as per IEC-1330 Routine test with Internal Arc tested enclosure) including facility for internal lighting, earthing, padlocks etc., connection between RmtU & transfoRmter with 3 Each. 1C x XLPE cable of suuitable size and connections from transfoRmtaer to LT ACB will be by busbar connections of suitable capacity including making Cable teRmtination within the enclosure etc. complete as per CPWD Specifications as required. Test report shall be submitted at the time of supply of material.

Package substation will have the following equipments- RmtU-NON-Extensible 3 WAY, 11 KV (2 Each. isolators as incomer and 1 no. vaCum circuit breaker as outgoing to transfoRmter) TYPE :- Free standing, Metal Clad, SF6 insulated with 2 Each. 630 A load breaking, Fault Breaking Switches and 1 no. 630 A SF 6 Circuit Breaker. IDMT Type Self Powered Relay. Ring switches and 1 no. SF - 6 circuit breaker with Integrated Earthing Switches Live Cable Indicator for Ring Switches Padlocking Facility Shunt trip coil rating- 230V AC.

All civil works such as PCC/RCC foudation, PlatfoRmt, Filling trench and pedestals etc are included in scope of work. 11KV/433V, 500 KVA three phase, Dyn11, OFF load tap changer with ± 2.5%, ± 5%, -7.5%, Copper Wound, Class F insulation, Cast Resin Encapsulated winding, OIL type (ONAN) TransfoRmter with standard accessories. LV Compartment:- Outgoing:- 1No. 4 pole, 800 Amp, 50 KA, Microprocessor based MCCB.

Supply, Installation, Testing and Commissioning of ongrid Solar Photovoltaic Power Plant conformingto MNRE specifications as amended, consisting of Mono/Poly Crystalline silicon solar cells, net Rmting facility, necessary rotections, earthing, mounted on Aluminium/GI structure of suitable strength with following components complete as required:- a) Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, conformingto IS 4286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 VAC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total haRmtonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency. c) Data Monitoring System complete with accessories.

d) Fixing of Array junction box & Main junction box with IP 65 protection and teRmtination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. e) Lightning and surge voltage protection. f) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1 kV grade aRmtoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other accessories etc. as required.

Supplying, installation, testing & commissioning of 6 zone, voice alaRmt controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alaRmt panel for voice evacuation complete as required.

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required.

Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required.

Supplying, installation, testing & commissioning of ceiling/wall mounted loud speaker, 3/1.5 Watt in ABS enclosure complete as required.

Supplying, installation, testing & commissioning of digital audio amplifier 50 Watt, 25V Rmts operating at 240 volt AC supply complete as required.

Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V Rmts operating at 240 Volt AC Supply complete as required.

Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required.

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required.

speaker cable Single pair, 2-core, 1.5 Sqmm

speaker cable Two pair, 2-core, 1.5 Sqmm

speaker cable three pair, 2-core, 1.5 Sqmm

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required.

Supply Installation, Testing & Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all heRmtetically sealed inverter type Scroll Compressor(s), minimum two compressors for above 14 HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5.

Supply, installation, testing and commissioning of following minimum capacity 4/1-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.

Supply, installation, testing and commissioning of following minimum capacity and external static pressure VRF/VRV ceiling mounted ductable type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration isolators, drain pan, other necessary supports etc., suitable for operation on single phase AC supply 230 V ± 10%, 50 Hz complete as required. The unit shall have automatic force shut down provision in case of fire on receiveing signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.

Mid Static Ductable units (minimum 45 pascal external static pressure)

High Static Ductable units (minimum 110 pascal external static pressure)

Supply, Installation, testing and commissioning including vacCumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required :

6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

31.8 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation

34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation

41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having theRmtal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This including jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the the same including testing of joints complete as per direction of engineer in charge.

25 mm outer dia pipes.

32 mm outer dia pipes.

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes,hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.

Thickness 0.63 mm sheet

Thickness 0.8 mm sheet

Thickness 1.0 mm sheet

Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.

Thickness 0.63 mm sheet

Thickness 0.8 mm sheet

Thickness 1.0 mm sheet

Supply, installation, testing and commissioning of Motorized (ON-OFF Type) duct mounted GI volume control damper with enthalpy sensor and necessary control wire (minimum 1.5 sq. mm) for integration within AHU room.

Damper

Actuator

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.

Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required.

Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core.

Supplying, fixing testing commissioning of Return air diffusersof powder coated aluminium without volume control dampers with anti smudge ring & removable core.

Supply, installation, testing & commissioning of theRmtal insulated flexible duct of following sizes duly supported at regular interval as per site requirement etc. complete as required as per specifications.

200mm Dia

Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications

Fire Damper

Actuator

Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc. complete as required and as per specifications.

Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (Class “O”) insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required.

Supplying, fabricating and installing following size of perforated pre painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joints with connectors, suspended from the ceiling with M.S. suspenders including bolt & nuts, painting suspenders as required.

150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 50 mm depth X 1.6 mm thickness

Supplying, fabricating and installing following size of perforated pre painted M.S. cable trays bends with perforation not more than 17.5%, in convenient sections, joints with connectors, suspended from the ceiling with M.S. suspenders including bolt & nuts, painting suspenders as required.

150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 50 mm depth X 1.6 mm thickness

Supplying, fabricating and installing following size of perforated pre painted M.S. cable trays tees with perforation not more than 17.5%, in convenient sections, joints with connectors, suspended from the ceiling with M.S. suspenders including bolt & nuts, painting suspenders as required.

150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 50 mm depth X 1.6 mm thickness

Supplying, fabricating and installing following size of perforated pre painted M.S. cable trays cross members with perforation not more than 17.5%, in convenient sections, joints with connectors, suspended from the ceiling with M.S. suspenders including bolt & nuts, painting suspenders as required.

150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 50 mm depth X 1.6 mm thickness

Supplying & laying of 2x1.5 Sqmm fire alaRmt aRmtoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire aRmtouring & FRLS outer sheath complete as required

Supply of following sizes of XLPE insulated Copper ARmtoured cable, overall PVC sheathed 1.1 KV grade cables conformingto relevant IS code and technical specifications.

3CX 1.5 SqmM CU UN-ARmtOURD CABLE

Supply, Installation, testing & commissioning of IN LINE DUCT EXHAUST FAN,: Features: UL listed, CCC, CE, RoHS Certificated for safe use, Powerful and high efficiency - 2490 RPM, High perfoRmtance and static pressure - 20mm to overcome the resistance caused by long ducting, Balanced motor with peRmtanently lubricated ball bearings for vibration-free operation and continuous running, Solid metal construction with black matt sheet, Moisture resistant, Extended collar and lip for easy duct hook-up.

Canvass Connection Providing and Fixing Canvas Connection of Fire Retardant and non porous double layer material between Each indoor units and ducts

Supply Instalaltion, testing & commissioning of Y-joints.

Two Loop Panel.

Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required

Supplying, installation, testing & commissioning of intelligent analog addressable phototheRmtal detector complete with mounting base complete as required.

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required.

Supplying, installation, testing & commissioning of intelligent addressable theRmtal detector with rate of rise Cum fixed tempreature theRmtistor complete with base as required

Supplying, installation, testing & commissioning of addressable manual call point complete as required.

Supplying, installation, testing & commissioning of addressable horn Cum strobe complete as required.

Supplying, installation, testing & commissioning of fire fighter telephone handset complete as required.

Supplying, installation, testing & commissioning of fire fighter phone jack complete as required.

Supplying & laying of 2x1.5 Sqmm fire alaRmt aRmtoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire aRmtouring & FRLS outer sheath complete as required

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.

1 run of cable

2 run of cable

3 run of cable

Dome Camera Supply, installation, testing and commissioning of IP based, 4 MP, FULL HD WDR IR DOME CAMERA - 30 RmtS, colour indoor verifical dome camera, 3.6 MM FIXED LENS, 1/3 ", 4 Mega Pixel PS CMOS Image Sensor, WDR (120 dB), Day/ Night (ICR), IR Range of 30 Rmts, IP67 and all ancillary equipments and all accessories. CP PLUS MAKE - UNC DD40L3-D OR EQUIVALENT IN OTHER MAKES LIKE SONY/ HONEYWELL.

Bullet Camera Supply, installation, testing and commissioning of IP based, 4 MP, FULL HD WDR IR bullet CAMERA - 40 RmtS, colour indoor verifical dome camera, 3.6 MM FIXED LENS, 1/3 ", 4 Mega Pixel PS CMOS Image Sensor, WDR (120 dB), Day/ Night (ICR), IR Range of 40 Rmts, IP67 and all ancillary equipments and all accessories. CP PLUS MAKE - UNC TD40L4-D OR EQUIVALENT IN OTHER MAKES LIKE SONY/ HONEYWELL.

Network Video Recorder Supply, Installation, Testing and Commisioning of 64 CHANNEL NETWORK VIDEO RECORDER, H.264/MJPEG dual codec decoding,Max 256 Mbps incoming bandwidth, HDMI/ VGA simulation video output, support 8 SATA HDD's upto 32 TB, 1 ESATA up to 16 TB, supports multi brand network cameras. Each NVR shall have a storage capacity so as to record a backup for 15 days at 4 CIF @ 25FPS.NVR should have system expandibility feature of at least 20% of current requirement, redundant fan and power supplies, outputs TCPIP network feature & server software monitor outputs. The NVR should be networkable via IP protocol & should be able to connect to a web based system for remote viewing via web system. Vendor should submit the storage / HDD Calculation.

Supply, Installation, Testing and commisioning of 40" inches LCD monitor

SITC OF 350 KVA DG SET Providing, Installing, Receiving, unloading, shifting to Sub-Station, storing, handling, Testing and Commissiong of 'Silent Type' Diesel Generating set alongwith Prime Power Rating 350 KVA, 415 volts at 1500 RPM, 0.8 lagging power factor at 433V suitable for 50 Hz, 3 phase system & for 0.80 Load Factor and consisting of the followings:

Diesel engine 4 stroke radiator Cooled, electric start, of suitable BHP at 1500 RPM suitable for above output of alternator at 50 Degree C, 50% RH & at 1000 Rmt MSL and conformingto BS 5514, BS 649, IS 10000, capable of taking 10% over loading for one hour after 12 hours of continous operation. The engine will be fitted complete with electronic Governer and all the required accessories.

Engine mounted Instrument Panel fitted with and having digital display for following: (i) Start-stop switch with key (ii) Coolant temperature indication (iii) Lubrication oil pressure indication (iv) Lubrication oil temperature indication (v) Battery charging indication (vi) RPM indication (vii) Over speed indication (viii) Low lub. Oil trip indication (ix) Engine Hours indication (x) Engine protection unit and sensors for winding & bearing temperature monitoring (xi) Remote Monitoring Module

Alternator Synchronous alternator rated at 250 KVA, 415 volts at 1500 RPM, 3 phase 50 Hz, AC supply with 0.80 lagging power factor at 50 Degree C, 50% RH & at 1000 Rmt MSL. The alternator shall be having microprocessor based controller with BMS compatibility, SPDP enclosure, brushless, continuous duty, self-excited and self-regulated through AVR conformingto IS: 4722/BS 2613 suitable for tropical conditions and with class-F/H insulation. Cable teRmtination Box suitable to receive 400A, TPN Busduct Sandwich or air insulated type. Base Frame & Foundation: Both the engine and alternator shall be mounted on suitable base frame made of MS channel with necessary reinforcement which shall be installed on suitable cement concrete foundation and antivibration mountings arrangement as per recommendations of manufacturer.

Fuel Tank: (External) Daily service fuel tank of suitable (375 Litre) capacity fabricated out of 3 mm thick M.S./CRCA sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS class 'C' pipes of suitable dia. Complete with valves, level indications & accessories as required as per specifications. Exhaust System: Dry exhaust mainfold with hospital exhaust silencer and catalytic convertor. Starting System:

DC starting system comprising of starter motors: voltage regulator and arrangement for initial excitation complete with suitable Each. of batteries (25 plates, 2 x 65 AH, 12V capacity SMF lead acid type) as required as per specifications. Accoustic for weather and noice proof enclosure with arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air in to the atmosphere as per CPCB-II NoRmt & technical specifications. Complete one Set Supply, installation, testing & commissioning of 990 litres capacity day oil storage tank fabricated from 6 mm thick MS plates. Tank shall include 450 mm ID manhole cover, level indicator with duly calibrated scale and flanged connection for inlet, outlet, overflow drain and probe provision for level controller & breather. Supplying and fixing Exhaust gas piping of 1x100 mm dia. welded black MS, B Class pipe conformingto IS:3589 cut to required lengths and installed with necessary bends, supports and clamps, anti-vibration mountings, insulation of exhaust system with mineral wool/Rockwool, 50 mm thick wire mesh & aluminum cladding etc., as required as per specifications.

EV Charging Station Supplying, installing,testing and commissioning of Electic Vehicle Charging Station ‎Kazam make Model ‎Kazam 3.3, Product Dimensions ‎27 x 19 x 13.5 cm; 2.02 Kilograms, Item part number ‎KZ001, Manufacturer Part Number ‎KZ001, Material ‎ABS PLASTIC, Colour ‎White, Special Features ‎Convenient to install, All weather and waterproof, Real time data analytics, IOT enabled charging, Wattage ‎3.3 KW, IP67 certified, Ip (max) 20 Amp, Vp(max) 280 Volts, Input voltage 1 Phase 230 V AC, Connectivity SIM Based, MCB & Fuse YES, Wire 3 wires ( live, neutral and earthing/ 2.5 sq mm), Output connector type 3 Pin socket, Output current 16A max, Output current 3.3KW, theft proof, B/W EVSE & CMS MQTT/TCP, All weather functionality YES Dust & water proof), Number of Outputs 1, Ambient Temperature -30C to 55C, Cooling: Natural including all civil work. (Kazam or equivalent or as approved by the engineer incharge)

Providing ,fixing , testing and commissioning of DC EV CHARGER 60KW As per Bharat EV Specification Connectors: CCS2 Number of plugs: 2 AC input voltage: AC380V±15% AC input frequency: 45-65Hz DC output power: 60KW DC output voltage range: 150 VDC – 1000 VDC DC output current: 0-250 AmpConnectivity authorization: RFID/NFC, App, VIN IP55 *1 year’s warranty *5m cable *4G/Ethernet/Wi-Fi*OCPP 1.6 *7-inch LCD screen/LED light complete in all respect as per entire satisfaction of Engineer Incharge / Project Manager including all civil work

A S ENTERPRISE