Providing and Installation of new 10 passenger elevator 01 No. at SIAM auditorium Kota

Amount

Supplying , installation , Testing and commissioning of the passenger elevator in existing duct & machine room ,complete in all respect having following main features:

(a)MOTOR : Gearless lift drive comprising of high starting torque lift duty, 3 phase 440 Volts A.C. permanent magnetic synchronous motor of proper rating with high efficiency shall be used.

( c ) Traction Media: main hoist flat coated steel belt / rope . Thimbles of spring permit adjustment of uniform tension for smooth operation of the elevator Pulse belt monitoring system to avoid the cut in the belt.

(d) Car : car should be with M S platform with bracings of adquate size and to sustain the impact load cabin plus passengers with safety factor of fire for steel withAnti skid PVC flooring and side panels should be of Stainless steel with moonrock finish of sheet of grade 304 duty with S.S. handrails . Car ceiling shall be steel finish with aesthetic appearances with LED ceiling lights .The size of the car shall be taken as per available lift well size and relevant BIS code of lifts . Car panel will also be of SS 304 grade finished with emergency stop device ,emergency alarm,mechanical door safety device ,full length infra-red curtain in car door , facility of auto/attended mode. All car panel buttons and all floor switches must be with brail language as per lift act. The Inspection unit shall be provided at to the car.

(e)Landing Doors : All landing door shall be fully automatic centre opening / telescopic made of moonrock finish stainless steel grade 304 with key holes and infrared curtains with unlocking facility from outside.

(f) Emergency light: Appropriate rechargeable battery operated LED emergency light in the car and along with alarm switch shall be provided.

(g) ARD: Automatic rescue Device (ARD) shall be provided according to passenger capacity with SMF batteries of approved make as per engineer incharge.

(h) Audio-Visual lndication : Audio visual indication in the lift car, showing over loading such that doors kept open till excess load is removed.

(i) Scrolling lndicators: Digital scrolling indicator system for up-down arrow with floor position indicator shall be provided inside the car and at all stops/floors.

(j) Buffers: Spring buffers/pU Buffers shall beprovided.

(k) Car Fan : ENERGY EFFICIENT Car fanl/blower with automatic sleep timer shall be provided.

(l) Voice Annunciator: Voice annunciator with suitable music shall be provided in lift car.

(m) Self diagnostics system for operational and safety parameters shall be provided in control panel

(n) Mechanical/Electronic over speed governor,door key holes in the floor doors, fireman switch shall be provided.

(o) Lift machine hoisting arrangement in the existing lift machine room at top, counter balance to promote smooth and economic operation complete with steel guide rails for the car & counter weight ,Trap Door, Lifting hooks as required and monkey ladders for lift pit should be provided by the agency along with all other steel structure works, foundations for the machine , sccaffolding in the pit with making even the surface of lift well as per their requirements etc as required.

(p) Permanent Electrical wiring in lift well with providing and fixing of proper numbers of light points, with LED fixtures , 2 nos copper plate /chemical earthing with 8 SWG copper earth wire and plug points shall be provided by the agency . (Power supply of 3phase 440 V shall be made available by department in lift machine room.)

(q) Agency has to provide all working drawings and documents to comply latest BIS specifications and make proper liasion services for obtaining all necessary permissions.

10 passengers/680 kg , 3 stops, rated speed adjustable up to 1.0 mtr /sec with 5 years comprehensive maintenance including 2 years DLP. Make OTIS/KONE/Schindler/Mitsubishi/Thyssenkrupp/Omega. (15 % Amount from final bill will be withheld for DLP period)

SHUBHAM ELECTRICALS AND MAINTENANCE