CIVIL WORKS FOR UP-GRADATION OF GCA BUILDING

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead ,Of area 3 sq. metres and below

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead ,Of area beyond 3 sq. metres

Demolishing brick work in cement mortar by manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and dumping/transportation to ground floor from height of 3 to 12 mtr disposal of unserviceable material within 50 metres from lead as per direction of Engineer - in- charge.

Dismantling tile work in floors and roofs laid in cement mortar including stacking dumping/transportation to ground floor from height of 3 to 12 mtr material within 50 metres lead. : For thickness of tiles 10 mm to 25 mm

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal dumping/transportation to ground floor from height of 3 to 12 mtr of rubbish to the dumping ground within 50 metres lead.

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of dumping/transportation to ground floor from height of 3 to 12 mtr pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore

Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking dumping/transportation to ground floor from height of 3 to 12 mtrwithin 50 metres lead as per direction of Engineer-in-charge

Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking dumping/transportation to ground floor from height of 3 to 12 mtrof useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps : 150 mm diameter

Demolishing waterproof cement concrete manually/ by mechanical means including disposal dumping/transportation to ground floor from height of 3 to 12 mtr of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling stone slab flooring laid in cement mortar including stacking dumping/transportation to ground floor from height of 3 to 12 mtr of serviceable material and disposal of unserviceable material within 50 metres lead

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking dumping/transportation to ground floor from height of 3 to 12 mtr within 50metres lead : Thickness above 25 mm up to 40 mm

Dismantling/Removal of false ceiling form roof incliding grids etc. complete including stacking dumping/transportation to ground floor from height of 3 to 12 mtrof serviceable material and disposal of unserviceable material within 50 metres lead. as directed by EIC. The rate shall include for cost of materials,tools, labour charges,taxes,etc

Centring and shuttering including strutting, propping, etc. and removal of form for the following items of RCC work at all depths and heights complete as per drawings, specifications and as per direction of Engineer-in-charge. : Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : Cement mortar 1:6 (1 cement : 6 Coarse sand)

Half brick masonry with non modular fly ash bricks of class designation 10, conformingio IS :12894, in super structure above plinth and upto floor V level. Cement mortar 1 : 4 (1 cement : 4 coarse sand)

15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand)

Complete removal of dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats

Supplying and apply two coats of Acrylic smooth exterior paint and supplying &applying one coat of primer over old work on wall surface having VOC content less than 50 grms/litterof approved brand of approved brand and manufacturer having low VOC

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Providing and laying vitrified floor tiles in floors and skirting, in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 800x800 mm

Providing and laying matt finished/antiskid Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of Size of Tile 600 x 1200mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.: Minimum of 300x600mm Size.

Steel work welded in built up sections / framed work including cutting, hoisting, fixing in position and applying a red oxide priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing and fixing 3mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. : 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately) - 18mm thick

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/ clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). - Frame size 45 x 70 mm

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.Upto 5mm depth and 5 mm width

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes-110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion-Coupler : 110mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Bend 87.5° : 110mm

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.: 110 mm

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal tegular/silhoutte,suspended grid, inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing white vitreous china infrared sensor operated urinal of size 610x390x370mm along with with providing and fixing electric sensor also including providing fxing with ,CP waste coupling ,Spreader, brackets, HB elbow, bottel trap, with necessary screws etc., complete including cutting and making good the walls, and floors, where required complete with rates including cost of material, labour charges, tools, lifts, leads etc., all as approved, specified and directed by EIC.urinals Providing and fixing white vitreous china battery/electrical infrared sensor operated urinal with CP waste coupling , 3 bolts, nuts, screws etc., complete including cutting and making good the walls, and floors, where required complete with rates including cost of material, labour charges, tools, lifts, leads etc., all as approved, specified and directed by EIC.

Supplying and fixing white glazed porcelain counter type hand wash basin of 600 x 480mm size or equivalent approved size of (HINDWARE / PARRYWARE) make confirming to IS, including supplying and fixing 32mm waste coupling, 15mm dia CP angle cock , CP bottle trap, CP sensor based pillar cock, etc., of JAGUAR / ESS / MARC / PARRYWARE make, PVC inlet connection, CP wall caps with screws a pair of CI / MS brackets fixed in wall with screws, all above of approved quality complete, with rates including cost of material, labour charges, tools, lifts, leads, transportation etc., all as approved, specified and directed by EIC.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931- 15mm nominal bore

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.15 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.20 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.: External Work. 25 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.: External Work. 50 mm nominal dia Pipes

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. : 15 mm nominal bore

Providing and fixing brass stop cock of approved quality : 15 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :20 mm nominal bore

Providing and laying single layer homogenous ESD flooring with marbled surface pattern as per EN ISO 10581 of ARMSTRONG make or equivalent product from TARKETT having gaps filled with thermal welding including cleaning the surface, providing copper ribbons of 25mm width and 25micron thcikness forming a grid of 1.0m x 1.0m. The sheet should have thickness of 2mm, width of 2.0mts & length between 16 to 20mts with rate includng cost of all materials,wastage, labour,tools, conductive adhesive etc all as specified and directed by EIC.(The sheet should have residual indentation of 0.05mm as per EN ISO 24343, the color fastness > 6 as per ISO 105-B02, vertical resistence R1< 1 x 106 Ohm as per EN1081 and the static electric charge < 2kV as per EN1815.The product should also confirm to class Bfl - s1 in flammability test as per EN 13501 - 1, slip resistence of R9 as per DIN 51130.

Providing and erecting partly glazed and partly panelled powder coated Aluminium partition using standard sections of JINDAL or HINDALCO so that each pannel shall not exceed 1.20 SQM with 12mm thick pre-laminated board having twin finish of Novopan / TESA in bottom rows and 5mm thick float glass of MODI / ST GOBAIN on middle and top rows including glazing clips, rubber gasket for fixing the glass, filling gaps with silicon sealant,strengthening the partition by taking the required intermediate vertical members up to roof lvel, etc. Specification for aluminum sections to be used is a) Bottom members -114.30 x 44.45x 2.15mm b) Top / vertical members - 63.50 x 38.10 x1.95mm c)Middle memebers - 63.50 x 38.10 x 1.95mm.

Providing, manufacturing and erecting Partly glazed and partly panneled single / Double leaf Aluminium door using standard anodized powder coated sections of JINDAL, HINDALCO make as detailed below all of approved make.(Including necessary screws,fasteners,cleats,rods etc.Specification for each shutter :-a) Bottom members -114.30 x 44.45x 2.15mm b) Top members - 47.62x44.45x1.95mm c) Side member - 47.62 x 44.45 x 1.82mm d) Middle member - 49.91 x 44.45 x 1.88mm; Door member of SL NO19566 of JINDAL e) 12mm thick pre laminated twin finish exterior grade of Novapan MFPB (PTX) - Superior grade or TESA / ASIS / ARCHIDPLY or any other particle board having ISI Mark or 12mm thick both side finished MDF boards f) Glass - 5.00mm thick plain float glass of MODI / SAINTGOBAIN make g) Rubber gaskets - Good quality of approved make h) Glazing clips - Weight of 0.097Kg/RM. I) Aluminium hinges 125mm long - 3Nos j) Aluminium handle 150mm long - 2 Nos. k) Concealed lock of make godrej/sheel 4 lever l) Aluminium tower bolts 200mm long - 2 Nos. m) door stopper, n)Miscellaneous -Al. cleats, screws ,Door sealant, etc

Providing and fixing in position (at any ht.& level) three track glazed, Aluminium powder coated sliding windows with sections conforming to JINDAL catalogue including providing & fixing 4.80 to 5.00mm thick plain float glass of MODI / SAINT GOBAIN make with one panel steel fly mesh shutter and good quality rubber / nylon gaskets, providing and fixing standard Aluminium 75mm handles, locking arrangement, necessary wheel / rollers etc.,. The windows shall be fabricated with Aluminium extrusions as described below of series B: a) Bottom member two track section 92 x 31.75 x 1.20 mm. b) Top & sides of two track section 92 x 31.75 x 1.30mm. c) Shutter top & bottom 40 x 18 x 1.29mm d) Shutter interlock 40x27x 1.29mm e) Shutter handle side 40 x 18 x 1.29mm complete with rates including cost of material ,tools, labour, transportation etc., all as directed and specified by EIC. [Gaps between wall / beam and Al. member shall be filled with slicon and made good].

Supplying and Fixing 18mm thick polished Granite slabs for flooring /skirting/cladding of required size of approved quality, colour( Lavender blue / Shimoga Red for flooring and black galaxy for borders), texture and finish, jointed with cement slurry and pointed with cement mixed with pigment to match the colour, laid over a screed of Cement Mortar 1:6 (One cement : Six coarse sand), 25mm minimum thick including wastages,curing complete with rates including cost of All material, labour,tools, transportation etc., complete all as approved, specified and directed by Engineer In Charge.

Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete

Providing edge moulding to 18 mm thick marble stone/Granite work counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade of classic made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Supplying and applying single component elastomeric 100% pure polyurethane coating, Dr.Fixit Flesi PU 270 I or equivalent, which is free from bitumen & tar and meets the requirement as per ASTM C836-18, having elongation of 40%(as per ASTM D412), tensile strenght greater than 2MPa (as per ASTMD412), tear strenght greater than 15N/mm (as per ASTM 624), water vapor permiability greater than 25gm/m2/day (as per ISO 9932:91), adhession to concrete more than 1.5N/mm2(as per ASTM D4541), resistant to plant roots as per UNE CN/TS 14416, applied with a totall consumption of 2.3kg/sqm to achieve a minimum of 1.5 mm system DFT to satishfy the requiremnt of LAM as per ASTM C898, including reinforcing the coating with 45gsm glass fibre meshat all corners and change in directions.The coating shall be continued to the entire horizontal area and should be terminated at 300 mm above FFL over the vertical surfaces as per manufactureres specifications and methodology.Protection to water proofing system shall be supplying and applying protrctive geo textile fabric of 150 GSM over the entire membrane with proper overlaps Note_All water proofing works as above shall be carried out by the application wing of manufacturere or skilled water proofing contractor under the guidence of technical expert from manufacturer, the contractor should submit the certificate from the manufacturer while recieving the work order

Mortar screed for protection & Slope: Providing & laying 50mm THK protective screed or of Cement Concrete of 1:1.5:3 mix admixed with integral compound conforming to IS 2645:2003, Dr. Fixit Pidiproof LW+ @ 200ml per bag of cement in the sunk area, to provide slope to the horizontal surface towards drain outlet and also to protect the waterproofing, keeping the surface curing and testing for water tightness for 7 days etc. complete

Apply 1 coat of spatter dash bond coat mixed in the ratio of 1:1:1 (Dr. Fixit Pidicrete URP: Cement: fine sand) to make thick slurry coat over the waterproof coating on the vertical walls. Apply 12-15mm thick plaster over the prepared surface of cement sand mortar admixed with integral waterproofing compound conforming to IS 2645:2003, Dr. Fixit Pidiproof LW+ @ 200ml per bag of cement. Including finishing & water curing of plaster for minimum 7 days.

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick).The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

Providing and laying plain cement concrete 1:2:4 using 20mm downgraded hard granite stone aggregate for laying flooring including mechanical vibration, watering, compacting, finishing top surface to the required level curing, complete for finished item of work all as specified and directed by EIC.

Providing and fixing PCGI Double/single leaf Door of 46mm thick shutter are made out of 0.80 MM thick PCGI sheets filled with PUF and necessary reinforcement of NICOMAC/ICLEAN/CELESTRA make or equivalent with double skin view glass of 500x 750 mm on shutter using 6mm toughened clear float glass including necessary beading ,sealing all joints with silicon sealant,push plate, etc with necessary SS hinges with ball bearings/pivots, handles ,arrangement for fixing in walls /panels and providing of concealed hydraulic door closers of DORMA /NICOMAC /ICLEAN /CELESTRA.

Provoding nad fixing retractable sliding tensile translucent fabric roof of fabric 950 GSM serge Ferrai, welding using 20KW High Frequency Australian make machiner, the supporting structure is MS square tiubes premium Quality, Jindal, or TATA steel, with fully motorized opening/closing with integrated auto sensors,drive mechanism wit High Torque Italian made motors, control interface is dual mode operation remote control and push button panel and safety interlock system to prevent over running/mechanical starin all complete as per direction of EIC

Supply and fixing of 1st class best seasoned teak wood for door frames / windows / ventilators / almarah frames etc., wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints and fixing with necessary hold fast screws, rawl plug etc., including cost of applying a coat of chloro pyriophos emulsiable concentrate confirming to IS 8944 - 2005 as per manufacturers specification, cost of all material, labour charges for fixing etc. complete for finished item of work as approved and directed by Engineer In Charge. Kiln seasoned and chemically treated hollock wood.

Supplying and sticking UV protected sun control / frosted film having 25 micron thickness over glass panes of windows,partitions and doors including material,labour,wastage etc as directed by EIC.

Suppling and Fixing Pre-Painted galvalume aluminium zink coating GI based corrugated steel out side extended roof sheet 0.5mm thick with zinc coating not less than 275 grams/smt of any colour having tensile strength of 550 Mpa for gutters , fixed with self tapping screws as bend to required shape of tarpezoidal/ rectangular section including joints lapped minimum 40mm wide and gaps seal with silicone sealant, ends fixed in CM wherever necessary at all heights including making cut outs for fixing rain water pipes, cost of all material, labour tools, overlapping,scaffolding, wastages, including necessary safety measures, incidental charges complete in all respects and as directed and approved by EIC.

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern of 2"x2'' appature and thickness 4.5 to 6mm, with approved standard section and fixed to the existing window frame/Aluminium beading whever not possible with window frame with C.P.brass/ stainless steel screws @ 200 mm centre to centre, including aluminium beading all around, cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.

Providing and placing on terrace (at all floor levels) 1000 lit capacity polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Preparatory work on old/new wooden surfaces by sandpapering and make clean to receive paint and applying French spirit polishing : One or more coats on old work.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead form site to the dumping yard up to 2Km, for all leads including all lifts involved

Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/ masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in- Charge. (The payment shall be made on the basis of actual weight of approved grout injected.) :Epoxy injection grout in concrete/RCC work of approved make

Supplying and providing PVC sheet of 2mm thick homogenous plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors rates include for all cutting and waste and work in all positions as well as in narrow widths, material,labour,wastage etc as directed by EIC.

Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead : Of sectional area below 40 square centimetres.

Providing and fixing precoated galvanised steel sheet Gutter (600 mm over all girth) roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :

Providing and laying in position cement concrete of 1:3:6 (cement:manuifactured sand derived from recycled concrete agrregates:stoen Aggregates of 40mm nominal size) in trenches, floor and foundations etc. work complete as per direction of EIC

Suppling and Fixing Pre-Painted galvatume aluminium zink coating GI based corrugated steel crimp curve out side extended roof sheet 0.5mm thick of any colour having tensile strength of 550 Mpa for gutters , fixed with self tapping screws as bend to required shape of tarpezoidal/ rectangular section including joints lapped minimum 40mm wide and gaps seal with silicone sealant, ends fixed in CM wherever necessary at all heights including making cut outs for fixing rain water pipes, cost of all material, labour tools, overlapping,scaffolding, wastages, including necessary safety measures, incidental charges complete in all respects and as directed and approved by EIC.

Sub-total Rs.

(A) Quoted percentage (Excess or below)

(B) Sub-Total Amount excluding GST Rs. [after considering percentage at (A)]

(C)Add 18% GST on Value on (B) in Rs.

(D) Grand Total : [ B+C] in Rs.

GST SAC Code No

Example: 1. If the contractor wish to quote 5% below estimated amount, then they need to enter "- 5 %" in Green colour Column against Quoted percentage (Excess or below) 2. If the contractor wish to quote 2% excess over estimated amount, then they need to enter "2 % " in Green colour Column against Quoted percentage (Excess or below)

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION::HYDERABAD

Pre-Qualification Profile

Estimated Amount in Rs.

Tender Notice Date:(DD-MM-YYYY)

Last date for submission of tender (DD-MM-YYYY)

Completion Period (In Months)

Name of the Individual / Firm / Company: * (Mandatory)

Type of ownership / Legal Status [Attach copies of the original document defining the legal status]

Year of Establishment of Company/Business

Registered Office Address, Telegraphic Address, Telephone No., Website / email id, FAX No.

Correspondance Address, Telegraphic Address, Telephone No., Website / email id, FAX No.

PAN no

PF number (If any)

ESI number

GST registration number

Particulars of registration with various Government bodies (Attach documentary proof)

a) Registration Number/s

b) Organization / Place of registration

c) Category [Limit for tendering]

Contact details

Contact person name

Designation

Mobile No.

Ph. No. with STD code

FAX No. with STD code

Email Id :

I.T Returns for past 03 years

Assessment year 2023-24 (i.e FY 2022-23)

Assessment year 2024-25 (i.e FY 2023-24)

Assessment year 2025-26 (i.e FY 2024-25)

Maximum value of works executed during the following 05 years and it should be certified by Chartered Accountant. (In Rs. Lakhs)

Turn over Criteria is Not met

DETAIL OF WORK ON HAND UPTO COMPLETION PERIOD OF SUBJECT WORK [Required for Bid capacity calculation] .Details are also to be furnished on Proforma-D

Sl.No(work No)

Bid Capacity

Action plan / bar chart as to indicate the completion of work, within the scheduled time (contract period)]

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Bank Statement for past THREE months

Latest Over draft Facilities with Bankers

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the final date of submission of Tender.

Required solvency value in Rs.

Name of Bank & Branch

Date of Issue (dd/mm/yyyy)

Value Rs.

Solvency value is NOT as per NIT

Experience of having successfully completed similar works during last 7 years ending on the previous day of submission of tender should be either of the following:. [ Work completion certificates along with LOA/PO/WO should be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated amount put to tender. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated amount put to tender. (iii) ONE similar completed work costing not less than the amount equal to 80% of the estimated amount put to tender.

Completed similar works during last 7 years

Work No I

Name of The organisation

Brief Description of Work:

Completed value of Work in Rs.

Date of Commencement of Work [DD/MM/YYYY]:

Date of Actual Completion of Work[DD/MM/YYYY]:

Date of Actual Completion of Work[DD/MM/YYYY]:

Work No II

Name of The organisation

Brief Description of Work:

Completed value of Work in Rs.

Date of Commencement of Work [DD/MM/YYYY]:

Date of Actual Completion of Work[DD/MM/YYYY]:

Date of Actual Completion of Work[DD/MM/YYYY]:

Work No III

Name of The organisation

Brief Description of Work:

Completed value of Work in Rs.

Date of Commencement of Work [DD/MM/YYYY]:

Date of Actual Completion of Work[DD/MM/YYYY]:

Date of Actual Completion of Work[DD/MM/YYYY]:

DETAILS OF TECHNICAL PERSONNEL AVAILABLE( if space provided is insufficient separate sheet to be uploaded with the same format as below)

PLANT, MACHINERY AND EQUIPMENT AVAILABLE [The Plant, Machinery and equipment (either owned or leased) that can be made available for this work must be furnished below].

Works of similar nature successfully completed in addition to Sl. No. (21) of Applicant Particulars (1) during the last 07 years ending last day for previous month.

Sl.No. (work No.)

Details of person holding the power of Attorney

Position

Mobile No.

Ph. No. with STD code

FAX No. with STD code/ e-mail ID

DECLARATION I

I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer . 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I//We are aware that document sought only be uploaded for evaluation of offer. 5. I/We shall not associate nor has been associated in the past, directly or indirectly with consultant or any other entity that would prepare the design, specification and other documents of the project.

DECLARATION II

I/We declare and undertake that - 1. To provide all facilities to HAL, Bangalore for verification of the information / details furnished by us and also for inspection of our works carried out / in progress if required. 2. The bid does not contain any amendment, modification as change of any type whatsoever in the bid documents and to any amendment issued thereafter.

EMD details

Description