Salem District (Thalaivasal Block) Construction of Passengers Shelter at New Taluk Office front Side H/o Deviyakurichi.Work No.01/2025-2026.MLACDS 2025-2026

Amount

1) Construction of Passenger's Shelter at New Taluk Office front Side H/o Deviyakurichi

Earth work excavation and depositing on bank with in initial lead of 10m and lift of 2m in hard gravelly soil as per SS 20 B for foundati

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete

Filling in Basement with excavated Earth in layers of not more than 15cm. Thick well rammed, watered and consolidated complying with standard specifications etc., complete.

Brick work in CM 1:5 mix using country bricks of size 8¾ x 4½ x 2¾ including cost and conveyance of all materials to site and including all labour charges etc., complete as pet std. specification

RCC 1:1.5:3 mix using 20mm ISS HBG metal including cost and conveyance of all etc., complete above basement

Centering charges for centering post and woodern planks including conveyance of all materials to site and proper centering etc., complete (Below Ground Level)

Above Ground Level

Supplying and fabrication of steel including cost and conveyance of steel to site and all labour charges etc., complete.

Finishing the top of roof with one course of pressed tiles of size 23 X 23 X 2 mm laid in CM 1:3 12 mm thick mixes with W.P. compound laid 2 % weight of cement etc., complete.

Supplying and applying of.two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The 'Surface shall then be” allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire su.rface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and th”en sand papering (waterproofabrasive sheet) the same after it is dry and finishing the surface. smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty should be got approved by the Executive Engineer before use on work.

Plastering in Cement mortar 1:5, 12mm thick including all cost and conveyance of all materials and all labour charges etc., complete.

Paving the floor with best quality vertified tiles of size 305 x305 x 6mm of approved colour shade and quality laid in cement mortar 1:3 (One Cement and Three Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigment

Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Providing the following thickness of Granolithic pattern floor finish with Plain Cement concrete 1 : 2 : 4 mix using 10-12mm ISS HBG metal and the top rubed smooth etc., complete complying with standard specification as directed. Rate for 10 m2

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Distembering two coats over priming coat including cost and conveyance of all materials to site and all labour charges etc., complete.

Exterior emulsion two coats over priming coat including cost and conveyance of all materials to site and all labour charges etc., complete.

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

KALESWARI (BID ID -1481699)