Restoration of rain damage LIS Thachi in GP Thachi , Tehsil - Sunni, Distt-Shimla

Description

Prov. 3 Phase Mono submersible pump set of reputed and approved make i.e. KSB/Hindustan model MR-3 confirming to letest BISspecifications i.e. 8304 . The pump set shall be fixed with free flow impellers of suitable allow as per BIS -8631-1976 with upto date amendmentsfor lifting raw water lubricated bush bearings of suitable alloy and shaft protection sleeves the pump shall be fitted coupled to submercible required cage motor com-pump to BIS 9283-1995 with upto date amendments corresponding to pump, fitted with water lubricated bush bearing alloys and shaft protection sleeve arrangement to counter balance the thrust caused due to water column in rising main and having cooling arrangement. The pump set should include the water level guard, errection clamps , cable clips and capable of following performances.

Static head = 20 mtrs

Discharge = 8 LPS

Dia of Rising main = 125 mm

Length = 0000 mtr

Pumping hours = 8 Hour

P/F 3 core copper cable wire 6 mm Sqm (Flat Submersible Cable)

P/F control panel for 5 HP Three phase with Amp. Mete,r volt meter, stater MCB water level gurd.

Installation of Pump Set i/c Cutting , welding , Jointing ,complete in all respect at site.

Carriage of Pump Set & Other accessories.

Electric welding with superrior quality rod GI Pipe of various dia to stop the leakage , including cutting of pipe if required alingement as per site with the help for Generator Set at Site of work.((earth work in trenches to be measured and paid included).

Cutting in Earth work and disposal of excavated earth upto a lead of 20 meters . Spade Work , Pick Work , & Jumper Work

Excavation in drain channel etc. in earth work including dressing of sides and disposed of excavated earth upto lead of 20 mtrs & lift up to 1.5 mtrs disposed to be levelled and neatly dressed pick/ Jumper Work.

Dressing of bed and preparation of sub grade for lining in pick work.

Dressing of sides slope and preparation of sub grade for lining in pick work.

Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in:-

Providing form work with steel plates 3.15 mm thick welded with angle iron in frames 30x30x5 mm so as to give a fair finish i/c centring ,shuttering, strutting and propping etc. with wooden battens & ballies, ht. of propping & centring below supporting floor to ceiling not exceeding 4 mtrs. & removal of the same for insitu-reinforced concrete work in :

Vertical surfaces such as walls ( any thickness ) partitions and the like including attached pilasters , buttresses, plinth and string courses and the like .