Construction of Administrative Building with Gallery for Hockey field in District Sports Complex Madurai.

Amount

Earth work excavation for foundation in all soils and sub soils and tofull depth as may be directed , except 1 in hard rock requiring blasting inclusive of shoring, shuttering and bailing out water wherever necessary, refilling the sides of the foundation with excavated sand orearth inlayer of not more than 15cm thick well rammed and consolidated, depositing the surplus earth with in the compound in places shown by the departmental officers with initial lead and lifts clearing and levelling the site etc., complete.

Providing Pre - construction Anti - termite treatment and creating a chemical barrier to the building by injecting chemical emulsion of required concentration under grade slab and grade beam, all round the Pile Caps, Catch basins, trenches, pits, tunnels, wall trenches, back fill, plinth filling, junction of wall and floor. External perimeter of building, surrounding of pipes, expansion joints, below U.G. sump and retaining/side walls etc. as per instructions of chemical manufacturer as directed by the Department officer/ Architect. The treatment shall be carried out strictly in accordance with the technical specification and conforming to IS 6313 or equivalent BS specification. The chemical to be used as insecticide for the treatment shall be Biflex Tc, TC stands for Termiticide Concentrate for Termite Control (Bifenthrin) and the application shall be diluted 1 part of chemical Biflex Tc with 49 parts of water to get 0.05% emulsion and strictly in accordance with the manufacturer’s specification.Including cost of chemicals labour charges,transport and storing etc complete and as directed by the department officers

Supplying and filling in foundation, basement, etc with filling sand in layers of not more than 15cm thick well watered rammed and consolidated etc., complete complying with standard specification and as directed by the departmental officers.

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)

For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.

For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

Providing and laying in position Standardised Concrete Mix M-25 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 350Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials)

Basement

Ground Floor

First Floor

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

Basement

Ground Floor

First Floor

Brick partition walls of 10.80cm thickness using II class table moulded bricks 9" x 4-3/8" x 2-3/4" in Cement Mortar 1:3 (One Cement and Three Sand ) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)

Ground Floor

First Floor

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications.

Special celing Plastering with cement mortar (1:3) 10mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications (S.I.309 Coloumn Plastering

Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat, including thorough scrapping, clean removal of dirt, over a newly platered wall etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat with Putty coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Paving the floor with descrgned coloured vitrified tiles of size 600 x 600 x 8mm of best quality and approved variety complying / confirming ISI specification land over cement mortar 1:3 (one cement and three sand) 20mm thick and pomted with same coloured cement neatly etc., complete.

Paving the floor with design antiskirt ceramic tiles (colour and shade as directed) of size 305mm x 305 mm x 6mm in all floor aver a base layer of cement mortar 1:3 (one cement and three sand) 20 mm thick laid in situ and pointed with same coloured cement.

Dadooing walls with best approved quality, Designed colour ceramic tiles of various sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Paving the top of roof with one course of Solar Reflective ceramic tiles of size 305x305x7mm of approved quality set in cement mortar 1:3 (one cement and three sand) 12mm thick mixed with Epoxy packing conforming to ISS including curing etc., Complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing in position PVC Trims (Corner beading) including labour for Fixing etc., complete and as directed by the departmental officers.

Renewing the damaged vertical blinds with fabric roller blinds of superior quality double ply plinds with 100% polister composition weight of 340 gsm / square metre and 0.40mm thick and finished width of 250cm with 100% light transmission etc.,Complete complying with standard specification and as directed by the departmental officers at site of work.

UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work.

UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work (PWD SOR 2020-2021, P.No 65)

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., With two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specifications. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.

Supply & fixing of WPC (Wood Polymer Composite) Frame extruded with size 75mm x 50mm. The single core door made of rigid WPC compound with minimum Bulk Density of 900 KG/ Cub.Mt. & shore hardness of 55. Supply & fixing of WPC door shutter, extruded as a single core board with rigid WPC compound with the thickness of 25mm (+/- 1mm) & minimum Bulk Density of 550 KG/Cub.Mt. & shore hardness of 55. For the aesthetic appearance, the door shall be a printed digitally on one side of the shutter and the design is as decided by the Engineer in-Charge of the department. The WPC door shall be fixed onto the WPC frame with 3 Nos of 5” SS Hinges and the door shall have 2 towerbolt on one side and 1 towerbolt or aldrop on other side for locking system and 2 numbers of handle on the either side of the doorshutter, etc. complete complying with standard Specification

Supply and fixing of Stainless steel (Salem stainless steel) Door frame ( Box section using stainless steel plate of 1.6mm thick) of size 100mm X 60mm with a rebate of 30 / 35mm X 15mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel holdfast etc.

Renewing and refixing the solid core flush door shutters with commercial ply on both side with teak wood lipping alround 35mm thick including cost of furniture fitting such as 3 nos 4"brass butt hinges,2nos 6"brass tower bolts,2nos 4"brass handle, 1 no brass drop, single key shutter, mortice lock without night latch, 1 no door closer, 1 no brass door stopper, 1mm thick best quality lamination sheet etc., complete complying with standard specification.

Supplying and fixing in position aluminium anodised fully galzed door and frame made out of box section 101.6x44.45x3.18mm thick at 2.319 kg\m door shutter made out of box section 47.1x44.45x2.5mm at 1.202 kg\m for vertical style and top, lock rail sections of size 50x44.50x2.5mm @ 1.292 Kg/m and bottom 100.4x44.45x2.50mm at 1.974kg\m using clips of size 17.15x17.27x1.5mm at 0.176 kg\m with necessary metal screws, rubber beading, strike plate type handle of size 100x30x1.60mm at 0.988 kg\m on both sides, tower bolts, lock pivot arrangements with 5.50 mm thick Plain glass with 1 No. of hydraulic door closers of approved quality using aluminium extruded section body tubler type universal with double speed adjustment with ISI monogram including cost of furniture fitting such as Pivot, hinges, Tower bolt, lock, door stopper and all materials labour power consumption required for fabrication drilling required for fabrication drilling holes inRCC columns floorslabs masonry wall wherever necessary with power drills to the required extent and make the same to original condition after fixing and as directed. All the aluminium sections are to be anodised with matt finish under electrically controlled condition in accordance with IS 1868-1962 for an average anodic flim thickness of 15 microns etc., complete. The materials should be got approved by the Engineer inchargebefore use on works. The rate shall be inclusive of all materials, labourfor fixing transportation loading, unloading, and all other incidential charges.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Providing & fixing at Fully glazed partition shall have fully glazed 12.0 mm Toughened glass to be fixed with help of necessary fittings. The cost shall include all labour, materials, contingencies, transportation etc complete

Supplying and fixing in position of Saint Gobain 12mm Clear Toughened Glass Door with fixed glass 237 X 1992 - 2nos, door glass 750 X 1985 - 2nos using BOAT door set with handle and single connector. All the edges of thr glass shall be CEp mirror polished. The door shall be provided with lockable,pull handles with tumb turns 84 length and made from SS 316 SS Grade.The rate includes cost of all materials, fixing, labour and transport charges etc., complete and as diracted by the departmental offices.

Supply and fixing in vertical post of Stainless Steel pipe of 110mm dia with necessary earthwork, PCC 1:2:4 ,incluiding Labour Charges for fixing, lifting charges, conveyence charges etc., complet and as directed by departmental officers.

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 83mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, stone dust cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

Manufacturing, supplying and fixing in position plain cement concrete precast kerb slab of size 600mm x 450mm x 100mm in Cement Concrete 1:2:4 (One cement, Two sand and Four jelly) using 20mm HBG stone jelly including cost of moulding charges, casting of slab, finishing, curing, fixing and pointing the slab with CM 1:3 (One Cement and Three Sand) to full depth of slab etc., complete complying with standard specification and as directed.

Supply and Installation of Toilet Cubicle using HPL board partition for rest room includes door made of compant laminates of single colour. The solid compact laminate is based on thermosetting resins, homogeneously reinforced with cellulose fibers and is manufactured as per relevant quality standards. Top surface on both sides is melamine coated which os scratch & impact resistant intermediate panel is one continous panel without any joints, all doors shall be 12mm thick with edges chamfered with accessories like Aluminium D post, Nylon Hinges-Gravity to close, nylon coat hook, Rubber Door Stopper lining, SS Screws & Wall plugs etc complete.

Supplying and fixing in position"Gyp board false ceiling using 10mm thick Gypboard of approved quality design pattern and drops given by the deptl officers. Using "U" shaped galvanised iron channel of size 25x25x0.55mm thick at 1.20mc/c on both longtitudinal and cross fixing "U" shaped G.I channel of size 50x10x0.55mm thick, direction for vertical sup port and at 0.90m centre to centre on longtitudinal direction respectively for Horizontal support by using teak wood reepers at corners and at intermediately and fixing the "GYPBOARD" on the panel provided as per design/pattern given by the deptl officers. And fininshing the ceiling surface with same plaster of paris materials etc.Necessary openings should be could with Acrylic paint made for providing spot light, floursent tubes in the ceiling by using kit ply 12mm thick and openings should be std specfn and etc complete complying with standard specification and as directed by the departmental officers at site of work.

Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Granite slabs (super fine polished with machine cut edges )Jet black and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Renewing the damaged false ceiling with new 2 square PVC Laminated GYP sum board GYPTYEX False ceiling in the true horizontal level false ceiling grid using hot dipped galvanized steel section exposed surface chemically cleaned capping pre finished in baned poly system paint wall angle of size 3000x24mmx24mm using in periphery of the ceiling fixed to the wall partition RC columns band walls with the held of screws of 60mm main runner of size 24x35x3000mm suspended at a 1200mm c/c by using 24x14mm angles hanger securely fixed to the structural soffits of RC slab by using 6mm cross tee of size 24x26x1200mm to be inter locked between in main runner at 600mm c/c mark to form a grid of 600x600mm long cross tee of size 24x26x600mm fixed in between 1200mm long cross tee for forming a grid of 600mmx600mm finally laying high quality viny film with back side aluminium foil PVC laminated gypsum ceiling tiles regular of size 595x595x7.50mm to 8mm thick of noise reduction co-efficient NRC of 01-03 relative humidity 95% density of 780kg.m3 and light refection 0.75 etc., complete.

Reconstruction of damaged Manhole chamber of following with a base concrete of by new on of a base of concrete of Plain cement concrete 1:5:10, 10cm thick over a 10cm sand cushiion & brick work in CM 1:5 for chamber wall with 20mm thick 1:3 CM plastering for walls flooring including cost of labour charges curing cost of sFRC cover slab of size 0x60x0.60 including labour charges for fixing the slab inposition etc.,

Manufacturing, Supplying and fixing in position Seating arrangements of size 630(L) x 410mm (W) x 2130mm (H) using 18mm thick Commercial plywood bothside bonded with Decorative Laminate Edges covered with PVC Edge beading with provision of Stroage Ubit to keep their belongins fitted with necessary hardware likes Hinges, Handle, Lock et., with provision of 3" moilded foam covers with approved fabric for sitting area including labour for fixing etc., complet complying with standard specification.

Providing Corner Dummy unit using 18mm Commercial plywood both side bonded with decorative laminate edges with necessary furniture fittings including labour for fixing etc., complete and as directed by the departmentl officers.h Gallery -Estimate.

Manufacturing, Supplying and fixing Massage Table of size 1840(L) x 750mm (W) using 18mm thick Commercial plywood bothside bonded with Decorative Laminate Edges covered with PVC Edge beading with with provision of 3" moilded foam covers with approved fabric for sitting area including labour for fixing etc., complet complying with standard specification.

Supplying and fixing in position SS J Hook inclufding labour for fixing in position etc., complete and as directed b y the departmental officers..

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)

Supplying and fixing in position Special type mirror of approved make and best quality and covering the Teak wood Reepers of size 50x12mm including labour chargs for fixing etc., complete and as directed by the departmental officers.

PLUMPING: Supplying and fixing in position best quality 110mm dia P.V.C soil/ waste pipes (6KSC) of various sizes having ISI mark and providing leakproof joints including fixing to the wall with P.V.C/ M.S clamps etc., and making connection to all sanitary fittings, dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications.(D)

Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).

110mm dia Door Elbow

110mm dia Elbow

75mm dia Door Elbow

75MM DIA Elbow

75mm dia Tee door

Renewing and laying and jointing UPVC/CPVC Pipe(Un-Plasticized Polyvinyl Chloride) UPVC/CPVC used for residential and home applications, water pressure in residential areas do not normally exceed the maximum tolerance.(schedule-40) but excluding cost of such specials and fixing in position dismantling masonry and make the same to original condition etc complete complying with standard specification and as directed by the departmental officers at site of work.

20mm dia UPVC pipe

20mm dia CPVC pipe

Renewing and refixing following UPVC/CPVC special of approved aulity and make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

20mm dia UPVC Elbow

20mm dia UPVC Tee

20mm dia UPVC Coupler

20mm dia CPVC Elbow

20mm dia CPVC Tee

20mm dia CPVC Coupler

Supplying and fixing in position CP shower rose with CP stop cock arrangement of size 15mm dia inlet and 100mm outlet to the pipe line with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers (The CP shower rose should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position C.P. Towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plug and C.P. Screws etc. complete complying with standard specification.

Supplying and fixing in position C.P. Soap tray of size 150 x 150mm including cost of teak wood plug and C.P. screws. etc. complete complying with standard specification.

Renewing the damaged broken unservicewable Health faucit with new one of Two way bib cock tap with flexible hose 15mm dia of approved quality and make including labour charges for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work

Renewing the damaged broken unservicewable Wall mixer tap with new one of C.P. coated two in one wall mixer tap of approved quality and make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Supplying and fixing in position Electric Geysar of following capacity of best quality and approved make including labour charges for fixing etc., complete and as directed by the departmental officers.

20 lit Capacity

15 Lit Capacity

Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 liters capacity PVC / 12.5 liters capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings.....

White EWC

Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of Sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three Sand ) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)

Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications

Supplying and fixing of 5000 liters capacity of triple layer sintex water storage tank with float valve & required all accessories.

Electrical Work for Admin Block with Gallery : Supply and fixing of 7 segment 8 way 63A TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 6 ways in each segment) and seperate provision for MCB / Isolators ( totally 18 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only

Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63 A 4P MCB Isolator as incoming and 4 nos. 40 A & 4 Nos 32 A 4P MCB asoutgoing on wall with earth connection only. Higher End

Supply and fixing of 8way Single pole and neutral MCB sheet steel enclosure with IP 42 protection distribution board double door with 1no. 32A DP MCB as incoming and 6Nos of 10A SP MCB for Outgoing on wall with earth connection only The MCB DB and MCB's should be with ISI mark. ( Like Standard make )

Wiring, testing and commissioning of 2Rx1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe with 2 mm thick, ISI marked concealed in wall and ceiling with PVC accessories with Module GI Switch Box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection by 2.5sq.mm PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light / Fan Point (for electronic) (4Points / Coil ) (length of point 12 to 18 mtr)

Supply and Run of 2 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm.PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour.

Supply and run of 2 of 2.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection 1 of 1.5sqmm (36/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade and making good of the concealed portion with suitable colour.

Supply and run of 2 of 6 sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 1 of 2.5 sqmm (36 /0.3) PVC insulated SC unsheathed Cu.Conductor with painting of suitable colour.

Supply and laying of 4C X 10 sq.mm Al XLPE armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and laying of 4C X 16 sq.mm Al XLPE armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and laying of 3.5C X 25 sq.mm Al XLPE armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and laying of 3.5C X 35 sq.mm Al XLPE armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and laying of 3.5 x 120 sq.mm Al XLPE armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and laying of 3.5 x 150 sq.mm Al XLPE armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and fixing of brass cable gland for 2C x 6 sq.mm PVC LTUG armoured cable with earth connection with necessary accessories etc

Supply and fixing of brass cable gland for 4C x 10 sq.mm PVC LTUG armoured cable with earth connection with necessary accessories etc.

Supply and fixing of brass cable gland for 4C x 16 sq.mm PVC LTUG armoured cable with earth connection with necessary accessories etc

Supply and fixing of brass cable gland for 31/2C x 25 sq.mm PVC LTUG armoured cable with earth connection with necessary accessories etc

Supply and fixing of brass cable gland for 31/2C x 35 sq.mm PVC LTUG armoured cable with earth connection with necessary accessories etc

Supply and fixing of brass cable gland for 31/2C x 50 sq.mm PVC LTUG armoured cable with earth connection with necessary accessories etc

Supply and fixing of brass cable gland for 31/2C x 120 sq.mm PVC LTUG armoured cable with earth connection with necessary accessories etc )

Supply and fixing of brass cable gland for 31/2C x 150 sq.mm PVC LTUG armoured cable with earth connection with necessary accessories etc

Earthing as per PWD standard with an earth electrode of 2meter Class 'B' GI pipe of dia not less than 32mm complete with necessary masonary work

Supply and run of 25mm x 6mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection and etc to complete the work

Supply and run of 25mm x 6.25mm Aluminium flat with necessary clamps / supports on wall / floor / ground for earth connection and etc to complete the work.

Supply and run of 2 of No.8 SWG GI wire for guarding with cradle with No.8SWG GI wire at the equal interval of 1.5 meter and etc to complete the work

Coil Earth to Street light poles with No 8 SWG GI wire of 11.5 Mtrs of length in which 10 mtrs of total length compressed in to a coil of one meter length (75 mm to 100 mm dia) connected suitable with Hexagonel earth bolt of size 8mm to 25 mm welded on the pole at one end with a coil position fixed on the earth and etc to complete the work

Supply and fixing of 50W LED Compound wall Light with Suitable Pole.

Supply and fixing of Spot light 9W Light fitting on ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.

Supply and fixing of down light 15W Light fitting on ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.

Supply and fixing of bollard light 10W fitting on floor with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.

Supply and fixing of 100W Street Light Single arm fitting on 6mtr pole with metal support with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. KL-4434 & 4763

Supply and Fixing of 20W 4feet LED Tube Fitting with TW round blocks on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting and etc to complete the work

Supply and Fixing of 24W LED 4000K 2 x 2 Square Type Recessed Fitting with LED on ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work

Supply and fixing of Wall bracket light 10W fitting on floor with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 meter rod with fan clamp with side plates and cross arm of size 450mm(18")

Supply and fixing of 1no of 6A two Modular 5Pin socket, 1no 6A Modular switch with module cover plate (plastic) on suitable concealed in box (GI) in flush with wall with connection at Higher End

Supply and fixing of 1no of 16A two Modular socket, 1no 16A Modular switch with module cover plate (plastic) on suitable concealed in box (GI) in flush with wall with connection at Higher End

Supply,Installation, testing and commissioning of Ladder Cable Tray, GI, 1.6 mm thick up to 450mm 2mm thick above 450mm for Electrical Cable with GI Angle/Hitech Suitable threaded rods with Anchor fasteners, Clamps, bolts,nuts including all the necessary fastener etc., to suit site conditions as required.

Supply, Installation, Testing and commissioning of EV Charger arrangement with all the necessary spares complete to enable the electrical vehicles for Topping up of electrical charge.

1 No 63A 5Pin 3 Phase Metal Clad socket outlet with plug Top and controlled by 63A 4P MCB

1 No 40 5Pin 3 Phase Metal Clad socket outlet with plug Top and controlled by 40A 4P MCB

sivaparameswari engineering construction and co (BID ID -1316394)

INDRA INFRASTRUCTURES (BID ID -1315852)

V P M PROJECTS (BID ID -1317921)

KJS CONSTRUCTION (BID ID -1318006)