SPL REPAIR TO BLDG NO 306 (OTM ACCN) AND ADDN ALTERATION/REPAIR OF BLDG NO 300 (OFFICIAL COMPLEX) OF 19 JAT AT ITARANA CANTT ALWAR

Amount

S&F in repair stainless steel rod of 20 -25mm inner dia (in lengths as directed) including decorative finial at both ends and pair of stainless steel brackets fixed at both ends with rawl plug & steel screws on walls/beam, all as specified & as directed.

Taking up or down 15mm steel tubing and connections, including cleaning for re-fixing or removal to store

Taking up or down 20mm steel tubing and connections, including cleaning for re-fixing or removal to store

S&F steel tubing medium grade 15mm bore with all fittings fixed complete to wall and or laid in floor all as specified.

S&F steel tubing medium grade 20mm bore with all fittings fixed complete to wall and or laid in floor all as specified.

S&F in repair rotational moulded polyethylene water storage tanks (white colour) (cylindrical vertical with closed top) of capacity 1000 Ltrs hoisted and fixed in position incl all necessary fittings (nipple, socket, union etc) complete all as specified in SSR Part I and removing to store, complete all as specified and directed.

S&F in repairs 15mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe, minimum weight - 210 gms ball valves any type all as directed.

S&F in repairs 20mm dia brass Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair vitreous china squatting pan, Orissa pattern, size 580mm x 440mm white with integral foot rests connection to trap and to flushing pipe, etc. complete including making good to floor complete all as specified & directed

S&F in repair vitreous china wash down water closet pan (pedestal pattern), white, with and including plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed complete all as specified complete all as specified & directed

S&F in repair white vitreous china under counter basin size 450mm x 525mm x195mm shape oval of jaquar/cera or equivalent including 32mm dia CP waste coupling complete all as specified and directed

S&F in repair vitreous china urinals, half stall type, complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S&F in repair PVC low level flushing cistern 10 ltrs capacity (white ISI marked) with inlet ball valve, float and handle, syphonic action type including brackets and flush pipe of poly ethylene of low or high density of PVC 32mm dia for LLFC complete all as specified.

S&F in repair PVC connection of 15mm bore with 2 Nos. PTMT nuts, 600mm long fixed with adapter and washers at both the ends complete all as specified and as directed

S&F in repair chromium plated health faucet for EWC with and including PVC connection 1 mtr long suitable for 15mm bore pipe complete all as specified and directed

S&F in repair PVC waste pipe of 32mm bore of suitable length for WHB/Urinal/sink complete all as specified and directed

S&F in repair Grating doom 100 mm dia of PTMT (Minimum weight 25 gms) fixed with cement complete all as specified and directed

S&F in repair 15mm bore swan neck cast copper alloy pillar tap weight not less than 400gms screwed for iron pipe or brass ferrule fixed complete all as specified and directed. Make:- Cera & Jaguar or equivalent

S&F in repair brass chromium plated shower rose 65mm size with swivel joint type including shower arm fixied to steel pipe of 15mm bore or union complete all as specified and directed.

S&F in repair Tubular towel rail, 20mm dia, D type, 60cm long between flanges of Brass chromium plated complete all as specified and directed

S&F in repair 15mm bore long body, fancy type, chromium plated bib tap cast copper alloy with crutch or butter fly handle complete all as specified

S&F in repair 15mm bore Stop valve/angle valves, fancy type chromium plated cast copper alloy screwed down high presure, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors / walls with and including taking out old pipes of any type and size complete all as specified & directed

S&F in repair PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints laid in trenches or in floors / walls with and including taking out old pipes of any type and size complete all as specified & directed

S&F in repair PVC (SWR) bends any radius 110 mm bore complete all as specified & directed

S&F in repair PVC (SWR) vent cowl 110mm complete all as specified & directed

S&F in repair 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified & directed

S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified & directed

S&F in repair PVC (SWR), 110mm junction single, (Single T) equal or unequal complete all as specified & directed

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key, scrubbing down with water etc all as directed.

M&L rendering 10mm thick in CM (1:6) on fair faces of brick/stone masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified.

M&L rendering 15mm thick in CM (1:4) on brick/stone wall surfaces or other than fair faces of brick work & surfaces, finished even and smooth without using extra cement with water proof compound. Note :- Water proofing compound shall be measured and paid separately here-in-after.

M&L rendering 5mm thick in CM (1:3) on concrete surfaces in ceiling, soffits and the likes; finished even & smooth without using extra cement complete all as specified.

M&L washed stone grit plaster on exterior walls in two layers, under layer 12mm thick cement plaster in CM (1:4), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm thick cement plaster in CM (1:1/2:2) (1 cement: 1/2 coarse sand : 2 pigmented stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing the top layer with brushes and water to expose the stone chippings complete all as specified Note : Grooves shall be measured and paid seaparately here-in-after.

Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction complete all as specified and directed

M&L preparing newly plastered surfaces of wall and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance dirt resistance, exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre / 10 Sqm over and including priming coat of Exterior primer @ 0.9 litre /10 sqm over 1mm thick Birla white wall care putty complete all as specified and directed .

Complete removal of existing treated surfaces of old plastered surface of wall/stone wall and applying two coats of 100% premium acrylic emulsion Paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance dirt resistance, exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre / 10 Sqm over and including priming coat of Exterior primer @ 0.9 litre /10 sqm over 1mm thick Birla white wall care putty complete all as specified and directed .

Preparing newly pastered surfaces of wall & applying three coats of white wash complete all as specified.

Preparing newly Plastered surfaces of walls and applying two coats of oil bound distemper over a coat of 1mm thick wall care putty of approved tint complete all as specified and directed

Preparing newly pastered surfaces & applying three coats of white wash on ceiling, soffits and the likes; all as specified.

Complete removal of existing treatment on walls and preparation of surfaces of walls and applying two coats of oil bound distemper (OBD) over a coat of 1 mm thick birla wall care putty complete all as directed.

M&L brooming down old decorated surfaces of walls, plastered or unplastered including cornices, plasters etc and applying one coat of white wash complete all as specified and as directed

M&L brooming down old decorated surfaces of ceiing /soffits, plastered or unplastered including cornices, plasters etc and applying one coat of white wash complete all as specified and as directed

Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position as in beams, staincases, landing slab, covers, chajjas and the likes; (reinforcement cut as required to facilitate demolition) all as specified & as directed.

M&L RCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and the likes complete all as specified and directed.

M&L RCC (1:2:4) Type B1 (using 20mm graded stone aggregate) as in chajjas, kitchen shelves and the likes; complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; n.exc. 200mm thick (Horizontal or sloping) Rough finished surfaces of concrete flat complete all as specified and as directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor & roofs n.exc 20 cm wide & sides of RCC/PCC bands in walls, horizintal or sloping & similar work exc 10cm but n.exc 20cm wide, rough finished surface of concrete complete all as specified and as directed.

M&L 25 thick PCC (1:2:4), Type B-0 (using 12.50mm graded crushed stone aggregate) as in floors sub base complete all as specified and as directed.

M&L Vitrified Ceramic tiles 10 mm thick in light shade(square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over with and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L Non Skid Coloured ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over with and including 15mm thick screed bed in CM (1:6) complete all as specified.

M&L Non Skid Coloured ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over with and including 15mm thick screed bed in CM (1:6) complete all as specified.

M&L machine cut kota stone slab flooring 18-20 mm thick size not less than 22" x 22" laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab laid over with and including 15mm thick screed bed in CM (1:6) including rubbing and mirror polishing complete all as specified and as directed.

M&L 75 mm thick PCC(1:3:6), Type C2 (using 40mm graded stone aggregate ) as in plinth protection finished fair and even complete all as specified & directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to stores and rubbish off premises all as specified and as directed.

Dismantling stone slab and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar including removing the dismantled material complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

M&L Glazed ceramic coloured tiles in vertical surface 450mmX 300mmX 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles and laid over with and including 10 mm thick rendering in CM (1:4) complete all as specified & directed.

M&L vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, in wall, dado, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over with and including 10 mm thick rendering in CM (1:4) complete all as specified & directed

M&L machine cut kota stone slab 18-20mm thick in steps for riser, dado, skirting, wall etc laid over with and including 10 mm thick rendering in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified & directed.

M&L 16-18mm thick green marble (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform, staircase treads and the likes; laid over with and including 10mm thick rendering in CM (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified & directed.

M&L 18-20mm thick Granite slab of approved shade, as in platform etc, bedded & jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of Granite stone including cutting, grinding and polishing (mirror polish i.e. full granite polish as per local trade practice) with and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L 18-20 mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over cement plaster and jointing with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and with and including 10mm thick rendering in CM (1:4) for recieving stone etc complete all as specified and as directed

M&L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 or E-165 complete all as specified & directed

M&L Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook & pintel hinges; large hasps & staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way & three way straps,plate washers & similar small articles conforming to Fe290-0 Gde E-165etc complete all as specified and directed

Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified & directed

M&L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan to any radius in half brick thick wall, built in cement mortar (1:4) complete all as specified and directed.

Taking down Chowkats or frames with shutters ( without taking off shutters from the frame) n.exc. 1.5 Sqm each & removing to store complete all as specified and as directed.

Taking down Chowkats or frames with shutters ( without taking off shutters from the frame exc 1.5 Sqm but n.exc 4 Sqm each & removing to store complete all as specified and as directed.

S&F 35mm thick IInd class hard wood factory made panelled door shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and stiles as per IS: 1003 (part-I), kiln seasoned and chemically pressure treated and fixed to chowkats complete all as specified & directed

S&F 35 mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats complete all as specified & directed

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

S&F factory made solid PVC Moulded door shutter 28 to 30mm thick (Stiles) with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on front face & 2 mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification complete all as specified & directed

S&F mild steel cupboard shutter with frame, Godrej pattern made out of 22 guage mild steel sheet including chromium plated MS handle with proper locking arrangement (brass mortice lock vertical type size 65mm 4 lever with escutcheon plates & two keys) with & including two coats of spray painting with synthetic enamel paint of approved tint over a coat of red oxide primer including fixing with 6 Nos 12 mm dia bolt 150mm long grouted in brick wall/concrete including making good the disturbed surface as original complete all as specified and as directed. Note :- The measurement shall be taken of front elevation and not girthwise.

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified & directed

S&F steel windows box type with side hung shutters including projecting type hinges with steel handle 150mm, and steel peg stay, complete with glazing bars, dovetailed or welded & factory made (XW2)M/F) double shutter, openable shutter with glazing bars and other openable shutter without glazing bars, fabricated with members of standard size as shown on drawings including frames complete all as specified. Note :- The quoted rates shall be deemed of lugs and FI required for fixing wire cloth, Sheet Glass, Grills, iron mongry and guard bars as shown on drg.

S&F steel ventilator with top hung shutter including hinges steel peg stay complete including taking down complete all as specified and directed.

S&F Butt hinges 100mm long medium weight, stainless steel complete all as specified& directed

S&F 150mm anodised aluminium barrel tower bolts of extruded section and fixed complete all as specified & directed

S&F 150mm anodised aluminium handles, cast type complete all as specified & directed

S&F 150mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed complete all as specified and directed

Preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed

Preparation of old wooden surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed

M&L framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete & making good the floor in PCC (1:2:4) type B-0 to match the existing floor Fe-410 (Gde-E250 quality A).

Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed

Preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as directed

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples or nails and screws complete all as specified and directed

S&F 4 mm thick sheet glass ordinary quality in squares n.exc. 0.5 Sqm each pane complete all as specified and directed

Demolition mud in roofs, any thickness, including plastering, existing treatment and cleaning (whether full thickness removed or only part thereof) etc in all respect and preparing it for further treatment and taking out and disposal of debris & rubbish to a distance exc 1 Km but not exc 1.5 Km complete all as specified & directed

M&L PCC (1:2:4), Type B-0 (using 12.5 mm graded crushed stone aggregate) as in roof padding, laid to a minimum consolidated thickness of 25 mm as leveling course, laid and compacted in min slope 1:30 over roof complete all as specified & directed

M&L screed laid 15mm thick in CM (1:4) with water proofing compound over green concrete surface, finished even and smooth (without using extra lime or cement) complete all as specified & directed Note : Water proofing compound shall be measured and paid separately here-in-after.

M&L Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. m including cleaning surfaces over bituminious primer complete all as specified & directed

M&L APP based plymeric membrane minimum weighing 3 Kg/Sqm and minimum 3 mm thick reinforced with polyster non woven reinforcement/mat (center core) with thermal insulation laid by toarch application method with overlaps 100mm on length side and 100mm on the width side as per manufacture,s instructions with fabric (wt not less than 150 gms/sqm) on primed surface including two coat of refelective silver aluminium paint over APP membrane complete all as specified.

Supply only Integral water proofing compound

S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed

S&F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed

Excavation in trenches n.exc. 1.5 Mtr wide and n.exc. 1.5 Mtr in depth for foundation and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated material, n.exc 50 Mtr and depositing where directed at a level n.exc 1.5 Mtr above the starting point complete all as specified and directed.

Cutting holes in brick walls exc half brick but n.exc one brick built in cement mortar or cement lime mortar and stone walls built in lime mortar etc for inserting holdfasts and making good dismantled portion in CM (1:3) or cement concrete (1:2:4) Type B1 as required complete all as specified and directed.

M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

S&F in repair plain 4mm dia mild steel galvanised wire in detached work as in mosquito nets with and including fixing to straining bolts, hooks, eyes, etc. complete all as specified and directed

Treatment of sunken floors as per following courses :- 1) Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed. 2) PCC (1:2:4) type B0, covered filling in sunken portion 75mm thickness shall be provided at the junctions of RCC slab and adjoining walls. 3) Sunken floor and sides upto finished floor level shall be plastered with 15mm thick plaster in CM 1:4 wixed with WPC@ 3% by weight of cement. 4) Applying bitumen primer of sunken floor & side surfaces TANKMASTIC of M/s STP Ltd @ 0.40 ltr/Sqm. 5) Sunken portion shall be filled with lean concrete (1:5:10), Type E-2 using 40mm aggregate after carring out of satisfactory testing of CIpipes/Joints & Slab/walls by filling water 72 hrs. The sunken portion of Nahani trap/floor trap and pipes, joints shall be emmbeded in PCC (1:3:6) blocks 6) GI Spout pipe 32mm dia and 450mm long cross cutted ends shall be inserted at the time of repair to Sunken portion as directed. Note:- i) In case any defect is noticed the portion shall be grouted with cement slurry mixed with suitable chemical & tested again. This process of grouting and testing shall be repeated till leakage/seapage/dampness is elimaneted ii) Horizontal flat area only measured. iii) Above aspets are deemed to be included in quoted rate.

Taking down carefully copper/Aluminium point wiring for light/fan/socket/light fitting/power point and taking down of teak wood batten / PVC casing caping/PVC conduit/steel conduit and making good disturbed surfaces of walls/ceilings /floors etc with and including dismantling of fittings complete all as specified and directed.

M&L point wiring complete with 1.5 Sqmm single core multistranded copper conductor fire resistant low smoke (FRLS) PVC insulated and unsheathed cable 1100 Volts grade confirming to IS-694 drawn through non metallic rigid PVC heavy duty conduit in concealed (min 20 mm external dia) but shall be increased as per actual site requirement in accordance with clause No. 19.125 of SSR Part-I ISI marked with wall thickness not less than 1.8 mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/recessed in wall or ceiling including 1.5 mm FRLS PVC insulated unsheathed copper earth wire including sunken type pressed steel terminal boxes electro plated of suitable size with bakellite white/coloured top sheet cover 3.0 mm thick for one light / fan point controlled by one way switch including cutting chasis all as specified & directed.

All as per serial item No. 109.00 here-in-before but for one fan point controlled by one switch and regulator

All as per serial item No. 109.00 here-in-before but for one exhaust fan point controlled by one switch.

All as per serial item No. 109.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board.

All as per serial item No. 109.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board.

All as per serial item No. 109.00 here-in-before but for one light point controlled by two, two way switches

All as per serial item No. 109.00 here-in-before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour.

S&F stepped type electronic fan regulator, flush type and connecting up, ISI marked, 240 volts

S&F switch piano, flush type, single pole, one way, 5/6 Amp, 230 Volts.

S&F switch piano, flush type, single pole, one way, 15 Amp, 230 Volts.

S&F switch piano, flush type, single pole, two way, 5/6 Amp, 230 Volts.

S&F socket outlet, 3 pin (with 2 pin outlet also) 5/6 Amps, flush type, 240 volts

S&F socket outlet, 2 in 1, 3 pin, 5 and 15 Amps, 240 volts

S&F exhaust fan PVC body, AC single phase 230/240 volts of size 300mm sweep with louvers with and including taking down old unserviceable exhaust fan complete all as specified and directed.

S&F ceiling rose surface bakelite 65mmx50mm with two or three terminal complete all as specified.

S&F in repair 40mm bore, light grade, GI pipe for protection of LT cable fixed to walls/poles/under road crossing including clamps etc complete all as specified and directed.

S&F in repair 25mm bore, medium grade, GI water tubing IS-1239 marked, with and incuding all necessary pipe fittings laid in trenches, on wall, under floor, under road on same or new route and making good the disturbed surfaces to match with the existing finish complete all as specified and directed. Note : Excavation and earth work shall be measured and paid separately under relevant items.

S&F LED batten (1.2m) made CRCA sheet housing with a PC glossy diffisure duly prewired connection having nominal system lumen output of 2000 lumens at a minimum system efficiency of 115 lumen per watt and total power consumption not more than 20 watt including driver. it should have rated system life time of 40000 burning hours at L70 and should have a temperature of 6500 K CRI>80, thd<10 and PF>0.95 complete all as specified and directed make - Crompton Cat Part CIS-305-40-57-SL-DP-NWH, Philips Cat Part BN308C LED20S-6500 L120 PSU WH, Havells Cat Part STOUTPLUS600BS20WLED840SPCWH

S&F LED type building security light of aluminium housing light luminaire 25 watt 230 V 50 Hz including all as necessary fitting accessories and LED complete all as directed. Make Philips/Havells/Crompton

S&F lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified.

S&F LED bulb energy saving 10/11 Watt complete all as specified and directed. Make : Havells/Crompton/Syska

S&F in repair sheet metal enclosures double door type suitable for fixing MCB's, SPN with 200 Amps rated bus bar, 8 way, 240 Volts.

S&F in repair sheet metal enclosures double door type suitable for fixing MCB's, TPN with 200 Amps rated bus bar, 4 way, 415 Volts. Make : Havelles/Phillips/Bajaj

S&F in repair MCB 63 Amp, three pole & neutral, 415 Volt complete all as pecified & directed.

S&F in repair MCB 32/40 Amp, single pole & neutral, 240 Volt complete all as pecified & directed.

S&F in repair MCB 6-40 Amp, single pole 240 Volt complete all as pecified & directed.

Supply, laying, jointing and testing XLPE insulated armoured heavy duty LT under ground electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 16 sqmm 2 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified & directed. Note : Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid separately under relevant items.

S&F sub main wiring on and including passing through PVC conduit in concealed (including cutting chasis) 1100 Volts grade with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 sqmm and continuous earth with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 sqmm of green colour confirming to IS 694/1990 with and including taking down existing U/S sub main wiring. (Note: Two runs of cable with one run of earth wire and one run of PVC Coundit should measured as one length)

M&L earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & directed.

M&L brick work with FLY ASH BRICKS(As Per IS-13757(1993) burnt clay fly ash building bricks), (OLD SIZE BRICKS) with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection and complete all as specified & directed.

M&L dry sand and punning for cushioning to under ground cable all as directed. Note :- For the purpose of payment only punned thickness shall be measured.

Disconnecting from elect connection and taking down carefully the existing ceiling fan/exhaust fan/Geyser of any capacity, any make, any size and depositing the same to AGE E/M Alwar store yard with and including refixing the old serviceable ceiling fan/exhaust fan/Geyser carefully including necessary electric connection etc complete all as specified and directed.

shiva construction (BID ID -3144921)

ARUN ENTERPRISES (BID ID -3145180)

M/s ASK Enterprises (BID ID -3145476)

PRAGATI ASSOCIATES (BID ID -3145669)

Ex Serviceman Enterprises (BID ID -3139179)

Hitesh Construction (BID ID -3135527)

Radha Enterprises (BID ID -3137898)

GAR CONSTRUCTIONS (BID ID -3138551)