Loading
Loading…
Loading…
Tender Value
₹94.1 L
EMD Value
₹1.9 L
Closing Date
22 Jan 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
POWER
15 conditions · 3 needing a document upload
Only those firms which in their individual capacity, satisfy Standard Financial Criteria(s) need to quote for this tender. :The tenderer must have minimum average annual contractual turnover of V / N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-15, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. The tenderers shall submit Certificates to this effect which may be an attested Certificate from the concerned department / client and/or Audited Balance Sheet duly certified by the Chartered Accountant etc.
The tenderer should have a valid Electrical Contractor License from the concerned statutory authority. The above said Electrical Contractor License is to be submitted along with the offer otherwise the offer shall be summarily rejected.
As a proof of Technical Eligibility, the Tenderer(s) have to submit details (Technical Eligibility) as per Annexure-13 Tender Document, indicating that Contractor have completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works costing not less than the amount equal to 40% of advertised value of the tender, or One similar work costing not less than the amount equal to 60% of advertised value of the tender. Format of completion certificate to be produced is provided as annexure-18 of tender docuemnts. Work experience certificate from private individual shall not be considered. However, in addition to work experience certificate issued by any Govt. Organization, work experience certificate issue by Public listed company having average annual turnover of Rs. 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated /registered at least 5 years prior to the date of opening of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Defination of Similar Work :- Wiring/Rewiring in buildings with associated electrical works. OR Lighting arrangement in buildings, circulating area, yard, street etc. with associated electrical works. OR Wiring/Rewiring, Lighting arrangement in buildings with associated electrical works.
29 conditions · 5 needing a document upload
GSTIN number: Bidder shall submit attested or self attested copy of GSTIN certificate.
Following documents shall be submitted by the tenderer: (A)SOLE PROPRIETOR SHIP FIRM: (i)All other documents in terms of clause 1.1.12 of tender document . (B)HUF: (i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii)All other documents in terms of clause 1.1.12 of tender document. (C)PARTNERSHIP FIRM:(i)A notarised copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar. (ii)A notarised or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm.(iii)An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract.(iv)All other documents in terms of clause 1.1.12 of tender document . (D)JOINT VENTURE (JV): APPLICABLE ONLY FOR WORKS COSTING MORE THAN Rs.10.00 Cr. Not applicable for this tender. (E)Company registered under Companies Act- 2013:(i)The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company.(ii)A copy of Certificate of Incorporation.(iii)A copy of Authorization / Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company.(iv)All other documents in terms of clause 1.1.12 of tender document. (F)LLP (Limited Liability Partnership) Firm under LLP Act-2008: (i)A copy of LLP Agreement.(ii)A copy of Certificate of Incorporation.(iii)A copy of Power of Attorney / Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP.(iv)An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (G)Registered Society & Registered Trust: The tenderer shall submit: (i)A copy of the Certificate of Registration.(ii)A copy of Memorandum of Association of Society/Trust Deed.(iii)A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust.(iv)A copy of Rules & Regulations of the Society.(v)All other documents in terms of clause 1.1.12 of tender document .
The tenderer shall submit a copy of certificate (Annexure 19(A)) in case of other than Company/Proprietary firm by each member of a Partnership Firm / Joint Venture (JV) / Hindu Undivided Family (HUF / Limited Liability Partnership (LLP) etc, as the case may be. Non submission of above certificate(s) by the bidder shall result in summarily rejection of his/their bid. It shall be mandatory incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document. Note:- As per railway board letter No. 2022/CE-I/CT/GCC Correspondence Dated: 14.05.2024 "On IREPS Module, a facility has already been created for online submission of Annexure-V. Therefore, the provision of downloading of Annexure-V of GCC & uploading of physically signed Annexure-V by the tenderer had been discontinued on IREPS".
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Payment of Bid-security in respect of E- tendering will be deposited either in cash through e payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure-VIA of GCC Works 2022 and shall be valid for a period of 90 days beyond the bid validity period and any offer without the same will be treated as invalid. Details of bank account no. a n d technical details have been provided for in the software (IREPS) to which prospective registered tenderers will have access at the time of tendering. The EMD shall be made in the favor of Sr. Divisional Finance Manager/FZR.
In case, submission of Bid Security in the form of Bank Guarantee, following shall be ensured: (i) A scanned copy of the Bank Guarantee shall be uploaded on e-Procurement Portal (IREPS) while applying to the tender. (ii) The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bids (i.e. excluding the last date of submission of bids). (iii) Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. (iv) The Tender Security shall remain valid for a period of 90 days beyond the validity period for the Tender. (v) The details of the BG, physically submitted should match with the details available in the scanned copy and the data entered during bid submission time, failing which the bid will be rejected. (vi) The Bank Guarantee shall be placed in an envelope, which shall be sealed. The envelope shall clearly bear the identification "Bid for the ***** Project" and shall clearly indicate the name and address of the Bidder. In addition, the Bid Due Date should be indicated on the right hand top corner of the envelope. (vii) The envelope shall be addressed to the officer and address as mentioned in the tender document. (viii)If the envelope is not sealed and marked as instructed above, the Authority assumes no responsibility for the misplacement or premature opening of the contents of the Bid submitted and consequent losses, if any, suffered by the Bidder.
1. Only firm recognized by department of industrial policy and promotion (DIPP) as "Startups" shall be exempted from payment 4.1.1 of Bid Security as per GCC 2022. 2. All other firms except described above shall be required to submit the Bid Security as per terms and conditions of tender.
PAN CERTIFICATE : PAN The tenderer shall submit the photocopy of Permanent Account Number (PAN) issued by Income Tax authority attested by Gazetted officer / self attested.
The tenderer shall study the Northern Railway General Conditions of Contract Regulations for Tenders & Contracts - 2022 or latest along with tender documents before submission of the tender.
Applicable charges/recoveries/Advance etc. (Deployment of Technical supervisors per attached Annexure XIII) is applicable.
There is an option of payment to contractor through a letter of credit (LC) arrangement (Authority Railway Board's letter no. 2018/CE-I/CT/9 dated 04.06.2018)as given in clause 1.3.14 of tender document.
GCC works 2022(or latest if any) should be the integral part of this tender.
Electrical work in C/w Repair, maintenance of electrical assets of service buildings including station building, platforms and station yards over Firozpur Division.
251-Elect-T-21-2025-26~NR
251-Elect-T-21-2025-26
Open
Works - General
6 Months
Firozpur, Punjab
₹0
₹1.9 L
22 Jan 2026
1 Jan 2026
8 Jan 2026
73 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 94,08,456.39 | ||
| — | 510.00 | — | — | ||
| Supply of paint and painting of Rail/Tubular poles and brackets with superior quality aluminium paint after scrubbing the old paint on top and green enamel at the bottom of the poles upto 1.5 Mtrs height from ground level. The poles should be painted in two coats of paint. | — | — | — | 55,080 | |
| — | 50.00 | — | — | ||
| Supply of paint and painting of Service poles including clamps and brackets with superior quality aluminum paint after scrubbing the old paint. The poles should be painted with two coats of paint. | — | — | — | 3,003 | |
| — | 1130.00 | — | — | ||
| Supply of paint and painting of various electrical equipment's viz; small panels, water cooler cages, switch boards after scrubbing the old paint. | — | — | — | 14,667.4 | |
| — | 256.00 | — | — | ||
| Construction of foundation, muffing of Rail/Tubular poles with cement concrete ratio 1:2:4 duly plastered and white washed. The size of the muff should be one ft in dia and 2 ft in height at various locations in the zone. | — | — | — | 87,662.08 | |
| — | 150.00 | — | — | ||
| Supply, fixing, testing and commissioning of pole mounted junction box made of SMC base and door having lockable cover with 2x15 Amps kit kat fuse with 3 way neutral links for incoming and outgoing cables etc as per technical specification and site conditions, ISS/IE rules. Similar to be approved by Railway representative. The box shall have cable termination for loop in/loop out for 4 core 16/25 sq.mm cable. Make : Sintex model No. GS-JB 2014 or similar. This work includes connection with wire of suitable size and MS conduit pipe for fixing of junction box including earthing. | — | — | — | 93,157.5 | |
| — | 120.00 | — | — | ||
| Provision of cutting & removing of all type pole including dismantling of foundation & pole to be deposited in SSE/P store. | — | — | — | 84,435.6 | |
| — | 80.00 | — | — | ||
| Earthing arrangement by providing earth electrode of GI pipe 50 mm dia (B class) 4.5 meter long with flange including 6 SWG GI earth wire from earth pipe to connecting point on switch board to distribution board/pole etc. as per site requirement including masonry enclosure as per Tech specification at annexure 'A' relevant ISS & IE rules and site requirements. A suitable CI/MS/RCC/Fiber cover as approved by Rly . Representative, cover with locking arrangement shall be provided. | — | — | — | 1,83,873.6 | |
| — | 700.00 | — | — | ||
| Supply & recessing/fixing on surface 6 SWG GI wire for loop earthing as required as mentioned in explanatory note. | — | — | — | 6,566 | |
| — | 650.00 | — | — | ||
| Supply, fixing, testing and commissioning of LED tube light system wattage 2x18 Watt to 2x20 Watt complete with all mounting arrangement & accessories & flexible copper wire for connection from ceiling rose as per ISS/IR rules & site requirement as per CEE/N.Rly. Specification No.CEE/NR/121-Elect/PS/2018 (Rev '3') Dated 28.06.2018. | — | — | — | 6,54,101.5 | |
| — | 200.00 | — | — | ||
| Supply and erection of 45 W LED Street light fitting operating voltage single phase 230 volts AC, 50Hz complete with all accessories as per CEE/NR Specification. No.CEE/NR/121- Elect/PS/2018 (Rev '3') Dated 28.06.2018 or latest & CEE/NR Specification no. CEE/NR/121- Elect/PS/2019 (Rev.04) dt 04.11.2019 with correction dt. 10.02.2020. including connection with 2x2.5 sq.mm PVC insulated multi stranded FRLS copper conductor cable, testing, commissioning & earthing required as per specification | — | — | — | 6,96,850 | |
| — | 64.00 | — | — | ||
| Supply and erection of 200W LED Flood light fitting operative voltage single phase 230 V AC , 50 HZ conforming to PCEE/NR specification No. Pr. CEE/NR/121-Elect./PS/2019/Rev.- 3&Rev.4 or latest complete with all accessories, including connection with 2x2.5 sq mm PVC Insulated Multi stranded FRLS copper conductor cable, testing, commissioning and earthing required as per site condition and explanatory notes. | — | — | — | 6,93,440 | |
| — | 180.00 | — | — | ||
| Supply, fixing, testing, and commissioning of LED inverter batten tube light system wattage 20 Watt complete, with power backup of 4 HRS, flexible copper wire for connection from ceiling rose as per ISS/IR rules & site requirement, temperature range -10 to +55 degree C, IP20,operating voltage 140v-270 v, with inverter function enable switch ON-OFF, internal surge protection 3KV. with all mounting arrangement & accessories as per site requirement. | — | — | — | 2,33,100 | |
| — | 135.00 | — | — | ||
| Supply, fixing, testing, and commissioning of LED inverter street light 45 Watt RTC fitting complete, with inverter load operation at 20-25% of rated system wattage for 1.5-2 hours, temperature range -10 to +55 degree C, IP66,operating voltage 140v-270 v, with inverter function enable switch ON-OFF, internal surge protection 5KV, Open circuit , short circuit reverse polarity protections & High voltage cut off protection. with all mounting arrangement & accessories as per site requirement. | — | — | — | 15,52,500 | |
| — | 2000.00 | — | — | ||
| Supply and recessing/fixing of 25mm (Medium) PVC conduit pipe conforming to IS 9537/Pt.III/1983 or Latest Version with accessories, junction box, etc including making chase, plastering/clamping etc as per technical specifications. | — | — | — | 73,900 | |
| — | 7000.00 | — | — | ||
| Wiring for light points with supply and laying of FRLS PVC insulated multistranded copper conductor cable 1100 Volt 1x1.5 Sq.mm multi stranded confirming to IS-694 latest in the existing PVC pipe. | — | — | — | 1,04,720 | |
| — | 8.00 | — | — | ||
| Supply, erection, testing and commissioning of the following Double door wall mounted Pre-fabricated L.T. Distribution Boards of approved make, as per explanatory note & comprising; (i) Incoming MCCB 4Pole 63 A 35 KA B/C - 1 No. (ii). Outgoing MCB 6 to 32 A. SP 10 KA B/C (4 Nos. On each Phase) - 12 Nos. | — | — | — | 1,11,065.04 | |
| — | 17.00 | — | — | ||
| Supply, erection, testing and commissioning of the following Double door wall mounted Pre-fabricated L.T. Distribution Boards of approved make, as per explanatory note & comprising; (i) Incoming MCB 40 A DP 10 KA B/C - 1 No. (ii) Outgoing MCB 16 A. SP 10 KA B/C - 6 Nos. | — | — | — | 60,691.36 | |
| — | 4.00 | — | — | ||
| Supply, Erection, Fixing, Testing and Commissiong of LT panel having incoming 1x250 Amp MCCB 35kA FP with outgoing of 2x125 Amp MCCB 35 kA FP, 1x63 Amp MCCB 35 kA FP and 4x32 Amp 35 KA FP MCCB with Amp meter, voltmeter and indicator. Make of MCCB &MCB M/s Legrand, Havells, Schneider | — | — | — | 7,20,536.6 | |
| — | 13.00 | — | — | ||
| Design, Manufacture, supply and fixing of UPS rack cabinet with glass door, locking arrangement suitable for 2kva UPS with battery bank rake floor mounted made with mild steel and separate compartment for UPS and battery. | — | — | — | 32,500 | |
| — | 14.00 | — | — | ||
| Design, Manufacture, supply and fixing of enclosure suitable for existing LT panel with two door locking arrangement with mild steel of 14 swg including civil work and as per site requirement . | — | — | — | 70,000 | |
| — | 270.00 | — | — | ||
| Design, Manufacture, supply, fixing, testing and commissioning of single sided LED type signages at platforms of suitable size as CEE/NR specification No. CEE/NR/121-Elect/PS/2018 (Rev'3') Dated 28.06.2018 or latest. and as per site requirement. Note:- Static/single sided board of different sizes name is required. prior approval of message color and size to be taken from competent authority. | — | — | — | 3,93,900.3 | |
| — | 90.00 | — | — | ||
| Supply and fixing of bracket on pillar or as required made out of GI pipe 1 M 40mm dia class B GI pipe with ISI marked of approved make & shape suitable bracket shall be fixed with double clamp made of 40x5 mm GI clamp & suitable GI nut bolt & washer & as per explanatory note | — | — | — | 41,641.2 | |
| — | 1000.00 | — | — | ||
| Transportation, Laying, underground/road/Railway track, recessing in platform /wall along with Rly. Track/in laid RCC/GI pipe as required 1.1 KV grade LT XLPE insulated armored, aluminum conductor cable including making chase & plastering after laying of cable/digging of cable trench, sand cushioning, protective covering with second class bricks, provision of cable route marker as per Tech. Specification including end terminations with Aluminum Clamping socket/lugs, testing and commissioning of Above 25 sq.mm | — | — | — | 60,140 | |
| — | 700.00 | — | — | ||
| Supply & erection of 103 mm Inner dia Double Walled Corrugated pipe in ground under Railway track/road as required and as per explanatory note. | — | — | — | 2,53,085 | |
| — | 2.00 | — | — | ||
| Transportation/Relocating, Re-installation of 16m high mast tower including foundation with new foundation bolts up to 5 Km | — | — | — | 98,000 | |
| — | 8.00 | — | — | ||
| Repair / replacement of complete set of wire ropes 6mm dia 7/19 with accessories, 5 core 2.5sq mm copper cable of 16mtrs, replacement of aluminium pully set, overhaul of gear box, including dismantle and reinstall of 16 m high mast tower with suitable crane at same location and as per site condition and satisfactory of railway. | — | — | — | 3,84,000 | |
| — | 3.00 | — | — | ||
| Supply, fixing, testing and commissioning of 10 KWp on grid solar inverter. | — | — | — | 1,86,000 | |
| — | 10.00 | — | — | ||
| Dismentalling of solar with its all accessories and civil fundation and Re-installation of solar plant on various location including marking of structure, installation of GI structure followed by solar panel installation, string making & marking, cable dressing, safety life line system & associated welding work on roof and reinstallation of AC equipments on ground which will including civil work for fixing of inverter stand, ACDB & metering panel. Installation of inverter on stand and laying of AC cable & its dressing from meter panel to client panel near solar panel including material like DC cable, MC4 connector, nuts bolts, lugs, puff-sealant, cable try, plumbing accessories, civil work etc as per site requirement. | — | — | — | 54,000 | |
| — | 10.00 | — | — | ||
| Supply, Fixing, Testing and Commissiong of 3 phase 60 amp load capacity, fully site configurable digital home motor protection panel with following protection- 1. Over and Under voltage protection. 2. Motor over load and Dry run protection. 3. Neutral failure and ESD protection. 4. Voltage unbalance protection, 5. Current(amp) unbalance protection. 6. Phase reversal protection. | — | — | — | 2,15,500 | |
| — | 25.00 | — | — | ||
| Supply, fixing, testing and commissioning of post top LED luminaire for 360 degree indirect light of 40 Watt complete with driver etc. of Crompton Greaves make of Cat. No.LPTO-40- CDL or equivalent model of Philips, Bajaj or Havells as per ISS/IE rule and site requirement. Note: - LED lamps of NICHIA / OSRAM / SEOUL / PHILIPS LUMILEDS / LEDNIUM make shall be used in the luminaire. | — | — | — | 5,22,500 | |
| — | 4000.00 | — | — | ||
| Dismantling of existing LT line 3 phase 4 wire including rolling back conductor and supply to store of SSE/P. Details as per technical scope of work. | — | — | — | 25,960 | |
| — | 3.00 | — | — | ||
| Design, manufacturing, supply erection testing & commissioning of outdoor type feeder piller type panel LT distribution system suitable for 3phase 4 wire 415 V AC supply comprising: i) I/CMCCB 4P 125A with adjustable thermal magnetic release & 35AKA B/C-1No. ii) Out going MCCB 4P 63 A with 35 KAB/C -2 Nos iii) Out going MCCB 32A 4P with 5KAB/C-6Nos. The feeder pillar shall be complete with copper bus bars 150Amps. for phases and 75Ampsfor neutral as per drawing approved by railways and explanatory Notes. | — | — | — | 3,52,673.01 | |
| — | 600.00 | — | — | ||
| Laying of cable underground through 160mm dia HDPE pipe by Micro Tunneling cable laying method including supply and jointing of HDPE pipe | — | — | — | 10,47,336 | |
| — | 40.00 | — | — | ||
| Supply, Installation, Testing & Commissioning of single phase RCBO of 32 Amps capacity,30mA sensitivity with Metal enclosure. | — | — | — | 1,00,237.2 | |
| — | 100.00 | — | — | ||
| Design, Manufacturing, supplying, fixing and commissioning of Meter Box / MCB Box made of MS sheet 16 SWG die pressed as per drawing/Specifications. | — | — | — | 70,784 | |
| — | 100.00 | — | — | ||
| Supply and fixing of MCB sets comprising of 1x32 Amps DP MCB and 4x16 Amps SP MCBs in the meter box as indicated above. MCBs should be of approved make as per specification. | — | — | — | 70,850 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .