SPL REPAIR TO BER SUBMERSIBLE PUMP / MOTOR, SUCTION SWEEPER AND

Amount

Surface dressing n.exc 15 cm deep and getting out in loose/soft soil complete all as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and veraging 15 cm deep and getting out and getting out in loose/soft soil complete all as specified and directed

Removing excavated n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point etc complete all as specified and directed.

M&L for Hardcore gauge n.exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to true surface complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (40 mm graded aggregate) Cement concrete in foundations filling and mass concrete etc complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 (40 mm graded stone aggregate) as in foundations filling and mass concrete etc complete all as specified and directed.

M&L for 75 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in flooring in size of panel 2x2 mr with Glass dividing strips, 3 mm thick and 38 mm wide complete all as specified and directed.

M&L for Glass dividing strips, 3 mm thick, inserted in position, conform to design and 38 mm wide complete all as specified and directed.

M&L for PCC 75 mm thick type C-1, 1:3:6 using 20 mm graded stone aggregate as in plinth protection complete all as specified and directed.

M&L for Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colur having tensile strength of 550 MPA as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 at grade t 240 complete all as specified and directed.

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance please, cleats etc. Confirming to Fe-410-W (Gde E-250) quality-B etc complete all as specified and directed.

M&L for plates (plain or chequered) channels, square cut or notched (oridinary and counter sunk) forming holes, without any attachment confirming to Fe-410-W (Gde E-250) quality-B etc etc complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over one coat of red oxide etc complete all as specified and directed.

M&L for excavation in trenches n.exc 1.5 m deep and getting out in hard/dense soil etc complete all as specified and directed.

M&L for returning filling in excavated approved erth in to trenches around pipe etc after laying of pipes and testing etc complete all as specified and directed.

M&L for brickwork with sub class ‘B’ bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 etc complete all as specified and directed.

Providing, cement concrete type B1 (1:2:4) 20 mm thick stone aggregated in roof kerbs or mud stops, rounded or chamfered on edges, in lintels upto 1.5m clear span , cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, II complete all as specified and directed.

M&L for rendering 15 mm thick on faces of brick work or concrete surfaces finished even and smooth without using extra cement in CM 1:4 etc complete all as specified and directed.

M&L for preparation of new plastered surface and apply two coat of cement base paint over one coat primer of wall etc complete all as specified and directed.

Supply, installation of submersible pumping set 4 stage electric driven of 41 HP capacity operating head range 55-96 mtr , directly coupled with electric motor, AC 3 Phase, 415 volts, 50 Hz, 2900 rpm with copper wound water proof winding complete with flange adoptor suitable for connection with 125mm dia flanged column pipe and one set of essential literature as recommended by manufacture complete complete all as directed. Make KSB (BPHA 384/4+HBC 413)/ Crompton/Kirloskar

Supply, installation of submersible pumping set 4 stage electric driven of 30 HP capacity ,operating head range 40-80 mtr head, directly coupled with electric motor, AC 3 Phase, 415 volts, 50 Hz, 2900 rpm with copper wound water proof winding complete with flange adoptor suitable for connection with 100 mm dia flanged column pipe and one set of essential literature as recommended by manufacture complete complete all as directed. Make KSB (BPHA 333/4D+HBC 303)/Crompton/Kirloskar

Supply, installation of submersible pumping set 6 stage electric driven of 25 HP capacity, operating head range 56-90 mtr head, directly coupled with electric motor, AC 3 Phase, 415 volts, 50 Hz, 2900 rpm with copper wound water proof winding complete with flange adoptor suitable for connection with 100 mm dia flanged column pipe and one set of essential literature as recommended by manufacture complete complete all as directed Make KSB (BPI-322/6C+UMAI 150-24/21 )/Crompton/Kirloskar

Supply, installation of Open well submersible pump 5 HP , 3 phase, 415 volts, 50 Hz, head range 15 to 30 mtr , complete all as specified and directed. Make: KSB(MR5A)/ Kirloskar/ Crompton

Supply, installation of single phase vertical pressure booster pump of capacity 1HP complete with air tank, pressure control switch, pressure guage, brass assembly etc with all necessaray connection complete all as specified and as directed by Engineer-in-charge. Make: Kirloskar(CPBS-73624V)/ Crompton/KSB

Supply and fixing of suction Sweeper complete with motor pump of capacity 3 HP & starter,Stainless steel trolly with wheel and handle including 3 core cable (30 meter) with reqiured nozzle and fitting including nylon rope, hose pipe(30 meter),Pool Teliscopic Handle,pool deep bag net, 18 inch wall brush,18 inch SS Allage brush,pool test kit, CI suction Head 3 feet etc complete all as specified.

Excavation in trenches, n.exc 1.5m wide and n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n exc 10sq m on plan and n exc 1.5 m in depth and getting out for soft/loose soil complete all as specified and dicrected

M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate in foundation and mass concret / filling complete all as specified and directed.

S&F M S works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165(R)

S&F Tie bars with screwed ends, nuts, washers and mild steel plates for walls, chimneys, roofs, arches, etc king rods and straining bolts conforming to Fe-290 Gde-E-165(R)

S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc, wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mech etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165(R).

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other , or screwed both ends, each screwed and to be fitted with washers and one hexagonal or square nut, n exc 5cm long.

Supply only 3.15 mm dia GI wire 75mmx75mm mesh (chain link fencing ) made up to mattresses or cages lapped wired and laid in position including closing and tied with angle iron properly complete all as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standard, rails, straining bolts etc including provn of binding wire complete all as specified and directed.

M&L for preparation of new or previously untreated steel and iron surfaces of any description, Two coat of Black Japan paint over one coat of Red oxide over 10cm in width or girth, not otherwise described.

M&L for brick work sub-class ‘B’ bricks, straight or curved on plan of any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and directed

M&L for 35 mm thick precast PCC louvers and Jalees in 1:2:4, type B-0 (using 12.5mm graded stone aggregate) including suitable reinforcement, all moulding etc set in CM (1:4) complete all as specified and directed.

M&L for providing reinforcement cement concrete ( nominal mix) type A1 (1:1.5:3) (using 20 mm graded aggregate) in beams lintels over 1.5 m span complete all as specified and directed.

M&L for formwork to soffits & sides of floor or roof beam and lintel etc

M&L for mild steel TMT bars 6mm to 8 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding wjth and including mild steel wore (annealed) not less than 0.9 mm dia or securing with clips.

All as per item No 41 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.

Dismantling, floor any type, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for non skid Heavy duty Endura tile 300x300x10mm thick coloured joint free in floors etc set and jointed in neat cement slurr and pointed in colored cement to match over and including 15mm thick screed in CM 1:4 complete all as specified and directed.

M&L for 25mm thick plain cement concrete type B0, 1:2:4 (using 12.5 mm graded stone aggregate) as levelling course all as specified and as directed.

Demolition of cement concrete (unreinforced) of any and in any position not otherwise specially provided for complete all as specified and directed.

Supply and lay steel water tubing GI medium grade ISI marked 20 mm bore dia with all fittings laid in trenches or fixed to wall etc complete all as specified and directed.

S&F Gun metal gate valve ISI marked with iron wheel head screweed both ends for iron pipes of 25 mm bore dia complete all as specified and directed.

S&F Gun metal check valve (Non return valve) 25 mm bore ISI marked screwed both ends for iron pipes of 25 mm bore dia complete all as specified and directed.

S&F PVC flexible insulated cable multi-strand copper conductor 3/4 core of size 2.5 Sq mm all as specified and directed.

S&F Power unit consisting of one 240 volt 25 Amp 10 KA SP MCB, one 25 Amp sockets and one 25 Amp plug top prewired complete all as specified and directed.

M&L for fabrication and S&F rain water shelter suitable for pressure pump set complete including PCC/ cement work as required at site as specifeied and directed by Engineer-in-Charge.

M&L for complete removal of existing treatment of old plastered surfaces of walls applying two coats DARK RED COLUR exterior emulsion paint over a coat of primer with 1.5 mm thick wall care putty for a dimension of 1.35cmx180cm with letters inscribe DARK WHITECOLOUR in english and hindi language with description and letter font size as 1. PROHIBITED AREA ( 6 INCH FONT SIZE) 2. WARNING ( 8 INCH FONT SIZE) 3. TRESPASSER WILL BE SHOT ( 5 INCH FONT SIZE) 4. SHOOTOUT IN INTRUDERS (5 INCH FONT SIZE) 5. BY ORDER (5 INCH FONT SIZE)

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window - cills, cooking platforms and like fixed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. Conplete all as specified and directed.

S&F in repair 3 mm thick (ACP) aluminium composite panel letter size 200mm x 25x25mm with inside LED lights (Vita 25 mm aluminium foil with PVDF coating ) in English and filling the gap with silicon, sealant and other materials of approved quality etc complete in all respect as specified and directed.

S&F in repair 3mm thick aluminium composite panel cladding using aluminium composite panel sheet 3mm thick (Vita 25mm aluminium foil with PVDF coating) works) and filling the gap with silicon, sealant and other materials of approved quality etc complete in all respect as specified and directed.

S&F2 KVA on line UPS single phase input 160 to 260 V and output 230± 1% for 300 min back up incl exide 7AH 12 V SMF batteries 6 Nos with racks & links and 2 years on site warranty complete in all respect as specified and directed.

M&L for sub main wiring with 2 run of single core PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 4 Sqmm FRLS, 1100 Volts grade cable drawn into and including rigid non metalic PVC conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 4 Sqmm FRLS 1100 volts grade cable continous earth wire of green colour code complete. Note : Two runs of 4.0 Sqmm cable and one run of 4 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealconduit and making good to match with existing finish.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items of this schedule. The same shall be recovered from various payment to contractor before handing over old material.

chauhan construction

Abhinav Builders

M/S SWASTIK BUILDERS

Mohit Enterprises

M/s M A Traders

M.R. ENTERPRISES

HIMANSHU TRADERS