REPAIR TO PATH, SHED, HARDSTANDING, FENCING, BOUNDARY WALL, GATES, DRAINS AND RELATED WORKS IN AREA-I UNDER GE KAMPTEE

Amount

Demolition of cement concrete in ground floor & pavings not exc 15cm thick (below or above ground level) complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in mortar complete all as specified and directed.

M&L for crushed filling under floorings/ pavement spread and levelled in layers not exc 15cm thick complete including watering and consolidation complete all as specified and directed.

M&L for machine pressed precast conctete interlocking paver block colour glossy finished rubber pressed any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 Grade ® with Grey cement and pigment complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block colour glossy finished rubber pressed any shape and size confirming to IS 15658-2006 of 80 mm thickness M-35 Grade with Grey cement and pigment complete all as specified and as directed.

M&L for chequred cement concrete tiles colour glossy finished rubber pressed 30cm x 30cm x 25mm thick set jointed and pointed in neat cement slurry and pointed in coloured pigment over 20mm cement screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for hardcore of gauge not exc. 63mm broken stone or boulders deposited, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for plain cement concrete in sub bases/pavings type D2 1:4:8 (using 40mm graded stone aggregate) complete all as specified and directed.

M&L cement concrete tybe B-1, 1:2:4 (using 20mm graded stone aggregate) in floor finish concrete surface even and smooth without using extra cement complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in cills, steps, seismic and other similar bands, plinth courses, lacing courses parapets and railing upto 60cm height, copings, kneelers, bed plates, hold fasts block, filling on pressed steel door/ frame etc complete all as specified and as directed.

M&L for forming contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'B' complite all as specified and as directed.

Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m complete all as specified and directed.

Demolition of reinforced cement concrete any description and in any position not otherwise specifically provided for and disposal of unserviceable materials, debris and rubbish off the premises complete all as specified and directed.

M&L for precast RCC 1:2:4 type B1 using 20mm stone aggregate as in landings, cover slabs, for manholes etc and similar articles with plain faces set in cement mortar 1:4 complete all as specified and directed.

M&L for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in coping including weathering throating and necessary formwork complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 and finished Fair and even without using extra cement complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and as directed.

Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out hard/ dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, complete all as specified and as directed.

M&L for cement concrete type B-2, 1:2:4 (Using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes for notching of wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

M&L for RCC M-40 modular, weather proof, designer Precast Compound Wall, manufactured with Reinforced concrete using vibro compaction method, Post and Panel System, Precast Concrete Panel, Size: 2000 X 300 X 50-80 mm thick, Reinforcement: 3 No. – 8 mm ϕ bars tied with 8 mm stirrups @ 250 c/c, Finish: Stone / smooth, Concrete: M-40 Grade (GFRC), Precast Concrete Post (H Type), Size: 2500 X 140 X 140 mm, reinforcement: 4 No. – 8 mm ϕ bars tied with 8 mm stirrups @ 200 c/c, Concrete: M-40 Grade (GFRC) including necessary excavation for post holes and PCC 1:3:6 (using 20mm graded stone aggregate), painting as required colour etc complete all as specified and directed. Note:- Cost of reinforcement included in the rates given. Height of wall above GL 2.1m or as directed by EIC.

M&L for providing cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping benching, bed plates and the similar including, weathering, slightly rounded or chamfered edges and throating complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

Demolition of reed lathing, single or double including battens and plaster or chicken wire lathing, RCC jali complete all as specified and directed.

S&F precast cement concrete type B0 1:2:4 (using 12.5mm graded stone aggregate) as in louvers and jallies 35 mm thick (measured solid) including all mouldings but excluding frame and fixed complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or RCC Pipes) of any description and size set in cement mortar complete all as specified and directed.

M&L for concrete bed in PCC 1:3:6 type C2 (using 40mm graded stone aggregate) to drain pipes including packing under and haunching against the sides of the pipes after laying & testing for any dia of pipes complete all as specified and directed.

M&L for SGSW (Grade 'A') drain pipes confirming to IS size 150mm laid in trenches and jointed in CM 1:2 complete all as specified and directed.

M&L for SGSW (Grade 'A') drain pipes confirming to IS size 200mm laid in trenches and jointed in CM 1:2 complete all as specified and directed.

M&L for SGSW (Grade 'A') drain pipes confirming to IS size 300mm laid in trenches and jointed in CM 1:2 complete all as specified and directed.

M&L for SGSW (Grade 'A') drain pipes confirming to IS size 450mm laid in trenches and jointed in CM 1:2 complete all as specified and directed.

M&L for SGSW (Grade 'A') drain pipes confirming to IS size 600mm laid in trenches and jointed in CM 1:2 complete all as specified and directed.

Dismantling fencing, wire mesh, any type complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.

Supply only chain link MS galvanisd fencing, any size or type complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:6) and finishing surfaces even and fair complete all as specified and directed.

S&F MS screw bolts of dia 5-10mm (machine made) with hexagonal or square at one end and screwed the other end or screwed both ends length of bolt not exc 5cm long complete all as specified and directed.

S&F 10mm dia and over MS round bars in chain link fencing complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm in width or grith and applying two coats of synthetic enamel paint over a coat of red oxide paint complete all as specified and directed.

M&L for 2 coats of white wash on newly plastered surfaces on wall complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for and removing from site of work complete all as specified and directed.

Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sqm on plan and not exc 1.5m in depth and getting out soft/ loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and directed.

Removing excavated material exc 500m not exc 1.5 km and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

Removing building materials etc to a distance of exc 5.0 km under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.)[(-) Rs.69,349.80]

M/s B S Jain

M/s Jagdish Staioners and General Stores

M/s M.G. Hargunani

M/s Ajeet Kumar Singh

S D WAGHAMSHI

Bidder Name

S D WAGHAMSHI

M/s B S Jain

M/s Ajeet Kumar Singh

Alert Multipurpose Services

M/s Jagdish Staioners and General Stores

M/s M.G. Hargunani