SITC of split type AC units

Supply of 5 Star rating 1.5 TR Inverter type wall mounting type split air conditioner conforming to relevant IS Specifications and as per BEE star rating minimum ISEER of 5.2 having copper tube with aluminum fins in condenser unit outdoor suitable for operation on 230 volts 50 Hz single phase AC Supply High energy efficient capable of performing functions like cooling dehumidifying air circulating filtering etc including refrigerant microprocessor control with cordless remote control etc. as per manufacturer specifications etc complete with minimum 3 Mtr copper refrigerant piping power cable and drain pipe etc as required Makes M/s Hitachi/ Daikin/ Carrier/ Bluestar/ Mitsubishi O General Note The manufacturer shall give a warranty for the soundness of construction and performance of the air conditioner and shall be responsible for putting right any manufacturing defects free of charge for a period of 15 months from the date of supply or 12 months from the date of installation of air conditioner whichever is earlier. There after 4years 48months additional warranty on PCB Indoor and Outdoor Printed circuit board card and 09 years 108 months additional warranty on the compressor

Installation testing and commissioning of 1.5 TR Capacity Split AC unit at a specified location including mounting fitting of indoor and outdoor units on existing stands at proper locations laying of existing refrigerant pipe line insulating the refrigerant pipe leak testing and charging refrigerant gas in the unit suitable electrical connection wiring etc complete as required

Supplying and fixing extra copper pipe line both1/4 inch for gas line and 5/8 inch for liquid line OR suitable dia to match with the pipeline of the new unit along with suitable size rubber foam or insulation on surface of the wall including necessary flare nuts, suitably brazing with the existing pipe clamping making holes in walls same etc as per site requirement NOTE The length of refrigerant pipes supplied with each AC units is 3 Mtr Extra combined length shall be paid in this item for which firm shall quote their unit rates

Supplying and fixing of 4 C X 2.5 sqmm copper conductor PVC insulated flexible multicore cable of 1.1 KV grade on surface or tray etc complete with connections as required Polycab or Havells or Finolex

Supplying and laying of 1.1 KV grade XLPE insulated armoured and sheathed copper conductor cables confirming to IS 1554 Part I 1964 of 3.5 C x 25 sqmm size including providing and making cable termination by crimping joints as required. Suitable clamping arrangement shall be provided for cables to be fixed on walls or Cable trays or racks where necessary. Suitable cable glands shall also be provided for all cable terminations. Polycab or Havells or Finolex

Supplying and proper fixing of 25mm dia Nominal Size Polyvinyl chloride pipe along with all accessories Fittings such as elbow Tee etc for drain of the split AC units complete with making the pipe air tight fixing of heat insulation polyethylene foam with thickness more than 8 mm on the drain piping to avoid the condensed water dripping inside the room and making good the damages etc complete as required

Supplying and fixing 4 way 4 plus 12 Double door horizontal type three pole neutral sheet steel MCB distribution board 415V on surface recess complete with tinned copper bus bar neutral bus bar earth bar din bar interconnections powder painted including earthing etc. as required. but without MCCB/Isolator

Supply and fixing 32A rating 240 V 10 KA C curve MCB for inductive load of Single Pole SP in the existing MCB DB complete with connections testing and commissioning etc as required

Supply and fixing 63 A rating four pole FP 415 V isolator in the existing MCB DB complete with connections testing and commissioning etc. as required.

Supply and fixing DP sheet steel enclosure on surface or recess alongwith 25 or 32A 240V C curve DP MCB complete with connections testing and commissioning etc as required