Construction of Community Sanitary complex near Baboo Pyt Kuthyara Block Assar

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: all kinds of soil

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) including carriage of material all complete

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including carriage of material all complete

Supplying and laying in position stone boulders of size not more than 150mm inclusive of all carriages leads and lifts.

Centering and shuttering including strutting, propping etc. and removal of form work for footings foundations base of columns including carriage of material all complete

Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms beams, chajja, lintels etrc).

Centering and shuttering including strutting, propping etc. and removal of form for: Edges of slabs and breaks in floors and walls Under 20 cm wide

Reinforced cement concrete work in beams, suspended floors, All Works upto plinth level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more including carriage of material all complete

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation , plinth & Super structure upto level v including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) including carriage of material all complete

Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth and super structure upto level v including curing in :

Providing and Laying of 6mm Cement plaster of mix: 1 : 3 ( 1 cement : 3 coarse sand))

15mm Cement plaster of mix: 1 : 6( 1 cement : 6 fine sand) incl all carriages

Providing and fixing Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. In all colours, shades.

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever requiredWhite Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps

Providing and fixing mirror of superior glass (of approved quality) and ofrequired shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backingRectangular shape 453x357 mm

Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete

Providing and fixing 20 mm Dia G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.:

Providing and fixing 15mm Dia G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.:

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank of STAR , SYNTEX , VICTREX triple layer of white colour or wquivalent as approved by Engineer-in-charge

Providing and fixing 15 mm nominal bore PTMT bib cock of approved quality and color 122mm long Weight not less than 99 gms.

Providing and fixing PTMT stop cock of approved quality and color. 15 mm nominal bore, 86 mm long, weighing not less than 88 gms.

Providing and fixing 15 mm nominal bore C.P. brass angle valve forbasin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing PTMT grating of approved quality and colour. Circular type100 mm nominal dia

P/F of 20 mm dia G.I. elbows

P/F of 25 mm dia G.I. elbows

Supply and fixing of internal and external electrification including from service main to the metre point and then to main circuit board switches socket switch board mcb etc with ready to use as per instruction of Engineer-In Charge

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angles 40x40x6mm for diagonal braces

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 75 mm diametre

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 110 mm diametre

Providing and laying PVC pipes F-Trap 75mm diametre of supreme , prince , make All Complete

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively

CIB (citizen information Board ) size 4'00"x5'00"x0'9" (above plinth level) with tepered top having 20 degree slope in Brick Masonary(1:4) including plaster , paint, lettering and logos as per instruction of Engineer -in-charge including carriage of material. ( complete job)

ASHISH SINGH

nazir hussain