Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.4 CrAdmitted-Finance F 2 B WING FIRST FLOOR SHAPATH HEXA OPP GUJARAT HIGH COURT S G ROAD AHMEDABAD GUJARAT 380054 | AHMADABAD | GUJARAT | 380054 | ₹1.4 Cr | L1 | Admitted-Finance |
| 2 | L2₹1.6 Cr+₹22.2 L (15.8%)Admitted-Finance | ₹1.6 Cr+₹22.2 L (15.8%) | L2 | Admitted-Finance |
| 3 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| Sl No | Description | Qty | Unit | Supernova Engineers Limited L1 | ELECTRO EQUIPMENTS L2 |
|---|---|---|---|---|---|
| 1.00 | Supplying, installing, testing and commissioning of 625 KVA Diesel Generator set: (full specification is available in Tender document - BOQ, since portal has Limitation of specification length) Engine: Diesel generating set are rated at 1500 RPM and conform to ISO 8528 specifications. The engines are radiator cooled, four stroke and multi cylinder, conforming to ISO 3046. The scope of supply includes: Electrical starter motor 12V DC Battery charging alternator, Bosch fuel system with mechanical governor, A1 Class. Spin-on lube oil filter, Spin-on dual fuel filter with water separator, Turbocharger, Charge air cooler, Silencer (Hospital grade),Dry type air cleaner, Shutoff coil, Flywheel and flywheel housing, First fill of lube oil and coolant, Safety for low lube oil pressure, Safety for high water temperature, Permissible overload of 10% for one hour in 12 hours of operation. Capacity of Fuel Tank: Fuel tank capcity shall be for 850 Ltrs. As per the detailed specification. Alternator: Alternator is suitable for operation at 1500 RPM, 415 Volts, 0.8 pf (lag) suitable for 50 Hz, 3 phase, 4 wire systems, conforming toIS/IEC 60034-1. The Alternator is brushless type, screen protected, revolving field, self excited, self regulated through an AVR. The alternator shall have + 1.0 % Voltage regulation (max) in static conditions- IP: 23 protections with insulation class H. Mounting arrangement: Engine and alternator are mounted on a common MS fabricated base frame with AVM pads Control Panel: The control panel is manufactured with 14/16 gauge CRCA sheet and is powder coated for weather-proof and long lasting finish. The control panel consists of the following parts:- PS0500 Controller, Aluminium bus bars with suitable capacity within/outgoing terminals, Indicating lamps for ‘Load On’ and ‘Set Running’, Instrument fuses duly wired and ferruled, MCCB of suitable rating with overload and short circuit protections. Genset Controller: Microprocessor based generator set monitoring and control system. The control provides a simple operator interface to the generator set, manual and remote start/ stop control, shutdown fault indication, and an LCD hour counter. The integration of all functions into a single control system provides enhanced reliability and performance compared to conventional generator set control systems. This control has been designed and tested to meet harsh environment in which gensets are typically applied. Features, Functions, protections 16 character x 2 line alphanumeric LCD display with LED Backlight ..... Et all | 3 | Job | - | - |
| 2.00 | AMF Panel: Supply, Erection, testing and commissioning of AMF cum Auto Synchronizing Auto Load Sharing, Auto Load Depended start /Stop panel suitable for 3 x 625 KVA DG set as per the detailed specification attached.The necessary bus bar modification in the existing AMF cum Synchronizing panel to be done. (Make: Woodward or similar approved make) | 1 | Job | - | - |
| 3.00 | Exhaust Pipe: Manufacture, testing, Supply, Transportation, Installation, Testing, Commissioning of MS exhaust piping with rain water cap, bends& painting with 2 coats of Heat resistance antirust epoxy paint suitable to exhaust temperature. The sizes of the Exhaust piping shall be as per manufacturer‟s guidelines/recommendations. The exhaust pipe shall be with 50mm thick Glass wool insulation covered with 26 SWG Aluminium cladding for Exhaust piping - 8 inch dia | 40 | Mtr | - | - |
| 4.00 | 10 inch dia | 10 | Mtr | - | - |
| 5.00 | Supply, fabrication and erection & Installation of MS support suitable for exhaust pipe, residential silencer, etc. using angles/ channels, steel sections, U Clamps etc.complete with one coat of zinc chromate primer and 2 coats of black enamel paint. | 500 | Kgs. | - | - |
| 6.00 | Earthing: Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required | 8 | Nos | - | - |
| 7.00 | Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. | 80 | Mtrs | - | - |
| 8.00 | Cabling: Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 - 3.5 core 300 sqmm | 150 | Mtrs | - | - |
| 9.00 | 3.5 core 400 sqmm | 150 | Mtrs | - | - |
| 10.00 | Labour charges for laying of 1.1 KV class UG cable in existing trench/ GI pipe / stoneware pipe / on wall / on pole as required.In existing trench/duct for 3.5 core 300 sqmm / 400 sqmm | 300 | Mtrs | - | - |
Tender Value
₹1.5 Cr
EMD Value
₹2.3 L
Closing Date
5 May 2020, 6:00 pmClosed
The Registrar
IISc, Bangalore
Supply, Installation, Testing and Commissioning of 3 x 625 KVA Diesel Generator set at Biological Science Building in IISc, Bangalore
2020_IISC_551448_1
IISc/Tender 8/2019-20
Open Tender
Electrical Works
Item Rate
150 days
IISc, Bangalore
Refer tender Document
3 documents required · 3 mandatory
₹5,000
The Registrar, IISc
₹2.3 L
Bangalore
26 May 2020
10 Mar 2020
6 May 2020
10 Mar 2020
5 May 2020
18 Mar 2020
11 Mar 2020 - 17 Mar 2020
17 Mar 2020
Amount
Supplying, installing, testing and commissioning of 625 KVA Diesel Generator set: (full specification is available in Tender document - BOQ, since portal has Limitation of specification length) Engine: Diesel generating set are rated at 1500 RPM and conform to ISO 8528 specifications. The engines are radiator cooled, four stroke and multi cylinder, conforming to ISO 3046. The scope of supply includes: Electrical starter motor 12V DC Battery charging alternator, Bosch fuel system with mechanical governor, A1 Class. Spin-on lube oil filter, Spin-on dual fuel filter with water separator, Turbocharger, Charge air cooler, Silencer (Hospital grade),Dry type air cleaner, Shutoff coil, Flywheel and flywheel housing, First fill of lube oil and coolant, Safety for low lube oil pressure, Safety for high water temperature, Permissible overload of 10% for one hour in 12 hours of operation. Capacity of Fuel Tank: Fuel tank capcity shall be for 850 Ltrs. As per the detailed specification. Alternator: Alternator is suitable for operation at 1500 RPM, 415 Volts, 0.8 pf (lag) suitable for 50 Hz, 3 phase, 4 wire systems, conforming toIS/IEC 60034-1. The Alternator is brushless type, screen protected, revolving field, self excited, self regulated through an AVR. The alternator shall have + 1.0 % Voltage regulation (max) in static conditions- IP: 23 protections with insulation class H. Mounting arrangement: Engine and alternator are mounted on a common MS fabricated base frame with AVM pads Control Panel: The control panel is manufactured with 14/16 gauge CRCA sheet and is powder coated for weather-proof and long lasting finish. The control panel consists of the following parts:- PS0500 Controller, Aluminium bus bars with suitable capacity within/outgoing terminals, Indicating lamps for ‘Load On’ and ‘Set Running’, Instrument fuses duly wired and ferruled, MCCB of suitable rating with overload and short circuit protections. Genset Controller: Microprocessor based generator set monitoring and control system. The control provides a simple operator interface to the generator set, manual and remote start/ stop control, shutdown fault indication, and an LCD hour counter. The integration of all functions into a single control system provides enhanced reliability and performance compared to conventional generator set control systems. This control has been designed and tested to meet harsh environment in which gensets are typically applied. Features, Functions, protections 16 character x 2 line alphanumeric LCD display with LED Backlight ..... Et all
AMF Panel: Supply, Erection, testing and commissioning of AMF cum Auto Synchronizing Auto Load Sharing, Auto Load Depended start /Stop panel suitable for 3 x 625 KVA DG set as per the detailed specification attached.The necessary bus bar modification in the existing AMF cum Synchronizing panel to be done. (Make: Woodward or similar approved make)
Exhaust Pipe: Manufacture, testing, Supply, Transportation, Installation, Testing, Commissioning of MS exhaust piping with rain water cap, bends& painting with 2 coats of Heat resistance antirust epoxy paint suitable to exhaust temperature. The sizes of the Exhaust piping shall be as per manufacturer‟s guidelines/recommendations. The exhaust pipe shall be with 50mm thick Glass wool insulation covered with 26 SWG Aluminium cladding for Exhaust piping - 8 inch dia
10 inch dia
Supply, fabrication and erection & Installation of MS support suitable for exhaust pipe, residential silencer, etc. using angles/ channels, steel sections, U Clamps etc.complete with one coat of zinc chromate primer and 2 coats of black enamel paint.
Earthing: Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
Cabling: Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 - 3.5 core 300 sqmm
3.5 core 400 sqmm
Labour charges for laying of 1.1 KV class UG cable in existing trench/ GI pipe / stoneware pipe / on wall / on pole as required.In existing trench/duct for 3.5 core 300 sqmm / 400 sqmm
Supplying and fixing of heavy duty cable glands suitable for UG cable of 3.5 core 300 sqmm / 400 sqmm, 1.1 KV class (metal only) ,
ELECTRO EQUIPMENTS
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.66 MB
TenderDoc8.pdf
Tender Documents • 2.90 MB
BOQ_578138.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .