GE/ALP (8571) KOLKATA OF 2025-26

Amount

Demolition of brick work built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed.

Dismantiling of Plain or Corrugated,semicorrugated, etc )steel sheeting any gauge,thickness,including Nainital or similar pattern in roof coverings and rubbish off the premises (out of MOD land), complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm and not exc 4 Sqm each and removing from site complete all as specified and directed.

Dismantling of timber scantling in fillet, rails, posts, rafters, purlins, etc under 40 sq.cm in section, in any postion framed work complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) of insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

Dismantling wrought iron or mild steel works of any description not otherwise provided for complete all as specified and as directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out soft/loose Soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and as directed.

Removing excavated material in exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point etc complete all as specified and as directed.

M&L for PCC ( 1:4:8 ) Type D -2 using 40 mm graded stone aggregate as in foundation complete all as specified and as directed.

M&L for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) ccomplete all as specified and as directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walling built in cement mortar (1:4) complete all as specified and as directed.

M&L for anti- treatment for treating the bottom and sides of excavation at the rate of 5 ltrs of emulsion per sqm of surface area complete all as specified and as directed.

M&L for form work to sides of pillar ,post struts pier column stanchions complete all as specified and as directed.

M&L for RCC Type B1 (1:2:4) using 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels etc complete all as specified and directed.

All as per item No 15 here in before but in column complete all as specified and as directed.

M&L for Damp proof coarse to horizontal or vertical surfaces including necessary form work in PCC(1:2:4) type B-0 25mm thick complete all as specified and as directed.

M&L Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs,etc. also splays between floors and beams, etc. complete all as specified and as directed.

M&L for formwork to Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

M&L for RCC Type B1 (1:2:4) using 20 mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for RCC Type B1 (1:2:4) using 20 mm graded stone aggregate as in Chhajja and in shelves and the like complete all as specified and directed.

M&L for mild steel TMT bars of 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

M&L for mild steel TMT bars of 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length bent to shape required including cranking bending spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

All as per item No 23 here in before but as in stirrups complete all as specified and as directed.

M&L for 10mm thick plastering in ceiling surfaces in CM (1:3) surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick plastering on fair faces of brick wall and concrete surfaces in CM (1:4) surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering on other than fair faces of brick work or concrete surfaces in CM (1:6) surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing surfaces new decorated plastered or unplastered surfaces of wall, pillasters, cornices etc and applying two coat of acrylic distemper with wall care putty complete all as specified and as directed.

M&L for preparing New decorated plastered or unplastered surfaces of ceiling, pillasters cornices etc and applying coat of wall care putty with two coat acrylic distemper emulsion complete all as specified and as directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 10 mm thick rendering in cement mortar (1:4) including grinding & polishing etc complete all as specified and as directed.

M&L for broken stone boulders Hard core, broken to gauge n exc 63 mm,deposited,spread and levelled in layered n.exc. 15cm thick, watered and rammed to a true surfaces complete all as specified and as directed.

M & L for 25 mm thick PCC (1:2:4) type B1 (Using 20 mm graded stone aggregate as in bedding of granite stone/ kota as in floors finished even and fair surfaces complete all as specified and as directed.

M & L for Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing incl 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

M & L for Machine cut kota stone slab 18-20mm thick over in riser of steps, skirting, dado and pillar laid over cement rendering and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing incl 15mm thick rendering bed in CM (1:6) complete all as specified and as directed.

M&L for 75 mm thick PCC (1:4:8) Type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and as directed.

M&L for 50mm thick sand cusion under layer of floor complete all as specified and as directed.

M & L for Machine pressed precast coloured concrete interlocking paver block any shape and size(Rubber moulded) confirming to IS 15658-2006 of 60mm thickness M-35 grade with Grey cement and pigment complete all as specified and directed.

Material and Labour for 20 mm thick pre-polished cement concrete designed coloured Cheuered tiles glossy finish as in floor set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles and laid over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

M&L for Providing cement concrete type B-1,(1:2:4) (using 20 mm graded stone aggregate) as in benching concrete,coping ,hold fast etc complete all as specified and as directed.

S&F for Powder coated aluminium sliding windows for (three tier) with shutter styles 40mm X 20 mm sheet thickness 1.5 mm Two shutter glass and one shutter of wiremess consisting of Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples, frame (chowkat) of window shall 100 mm X 44 mm X 1.5 mm thick section with or without rebate 5 mm thick tinted glass fixed with aluminum beads locking arrangements with each shutter incl aluminum grill complete all as specified and as directed.

Supply & Fixing for Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/chadding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F for pre-painted galvatume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall for rain water pipe ,fixed with self tapping srews complete all as specified and as directed.

All as per item no 43 here in before except sheeting any thickness complete all as specified and as directed.

M&L for suspended false ceilling system using metalic exposed suspende system, grid section size 600mm x 600mm comprising of GI powder coated main runner of dimension 39 mm x 24mm x 0.80mm thick ( thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of Runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X 24mm x 0.8 mm thick wall angle 22.2mm x22.2mm x 0.65 mm thick ( thickness comprising of GI/0.35 + PPPCGS/0.3 mm & Weight of angle 0.70 kg for 3050 mm length) with and including 6 mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid ( placed in the grid system duly suspended with 4 mm dia G I bars hangers fixed with steel dash through fasteners from purlins of the roof with necessary fittings and fixtures etc complete all as specified and as directed.

All as per item No 45 here-in-before but only for refixing the serviceable false ceiling complete all as specified and as directed.

S&F for Steel work in MS tubes (round/square) including special shaped washer, necessary FI angle iron if required to complete the works as in truss,purlins, rafter, stanchions etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 graded St-240 complete all as specified and directed.

All as per item No 47 here in before Erection and fixing only complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles n. exceeding 0.36 sqm over 15 mm thick screedbed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

All as per item no 50 here in before but in skirting ,dado etc over 10 mm thick cement plaster in CM (1:4) complete all as per specified and directed

S&F 2nd Class HW Plain, solid, straight chowkats and frames, wrought framed rebated on the solid, rounded or chanfered, put together with glue pinned at joints complete all as specified and as directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side complete all as specified and as directed.

S&F 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast al alloy complete all as specified and as directed.

M&L for two coats of synthetic enamel paint over a coat of pink primer area exc.10cm width or girth over new wooden surfaces including preparation of surface complete all as specified and as directed.

S&F 200 mm long Aluminium anodised, barrel tower bolts of extruded section all as specified and as directed.

S&F 150 mm long Aluminium handles, cast type, anodised complete all as specified and as directed.

S&F Stainless steel butt hinges medium weight 100mm long etc complete all as specified and directed.

M&L for (25x4)mm size mild steel flat iron as in hold fast conforming to Fe-290 Gde E-165 complete all as specified and as directed.

M & L for Cement concrete Type C1 (1:3:6) (20mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings/hold fast, kneelers, apex stones, bed plates, kerbs water troughs and the like including or chamfered angles and throating, complete all as specified and directed

Supplying and fixing Mild Steel framed work such as grills, gratings, etc. with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars, barred iron doors, railings and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed and design/shap approved complete all as specified and as directed.

M & L for 75mm thick cement concrete type C-2 (1:3:6) using 40mm graded stone aggregate as in plinth protection,sub base similar works complete all as specified and as directed.

Demolition of cement concrete in ground floor and pavings n exc 15 cm thickness (below or above ground level complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.

Use and waist form work to sides of pillars posts columns footing etc complete all as specified and as directed.

M&LRCC (1:1.5:3) type A-1 using 20mm graded stone aggregate as in foundations,including rafts,footings,foundation beam, baces of column under reamed pile and mass concreten walls,beams and columns etc complete all as specified and as directed.

S & F MS screw bolts (machine made) with hexagonal or square heads at one end and screwed the other,or screwed bothends,each screwed end to be fitted with washers and one hexagonal or square nut,but lenth of bolt exc 22.5 cm but n exc 30 cm &20mm dia complete all as specified and as directed.

S&F MS Plates (plaines or chequered) square cut or notched (forming holes with riveted,bolted attechment) (300x300x8) at bottom & (200x200x8) at top GDE Fe 410-S complete all as specified and as directed.

Dismantiling of floor hearth or wall tiling incl cement mortar (but not backing), and rubbish off the premises (out of MOD land), complete all as specified and as directed.

M & L for coloured Non Skid ceramic tiles 7 to 8 mm thick, (Square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including Screed bed or bedding layer or mortar 15 mm thick for laying floor finishes in CM (1:6) complete all as specified and as directed.

All as per item No 70 here in before but over 10 mm thick plater in CM (1:6) complete all as specified and as directed.

M&L for providing factory made 75 mm thick precast RCC cover slab of 3 MT load bearing capacity confirming to IS : 12592 (Grade M-30) complete all as specified and directed.

M & L for PCC (1:3:6) Type C2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

Preparation of new surface of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.

Disconnecting HT/LT Cable from transformer/DG by taking Shutdown, and recoonecting them complete all as specified and as directed.

Taking out Transformer(250 KVA)/DG(200 KVA) from its existing position by unscrewing all the foundation bolts etc. and refixing the same (alongwith all of its accessories ) by using hydraulic crane or any other means with the help of labours as required complete all as specified and as directed.

Excavation for taking out existing cable (HT/LT)/Laying new cable n exc1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc1.5 m in depth and getting out complete all as specified and as directed.

Materials and labour for sand filling around the cable with approved quality coarse sand for sand cushioning of Under ground cable including spreading and punning down to desired thickness complete all as specified and as directed.

Supply and laying for burnt brick sub class 'B' of size (25 X 12.5 X 7.5) cm locally available best quality laid in trenches for protections of under ground cable complete all as specified and as directed.

Returning, filling in trenches including spreading leveling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and as directed.

Removing excavated soil to a distance not exceeding 50 metre and depositing where directed at a level , not exceeding 1.5 metre above the starting point complete all as specified and as directed.

S & F GI pipe light grade 50mm Tubes with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed

M&L for taking out the existing electric LT Panel/AMF panle from theExisting location after tking the shut down and disconnection of all incoming/outgoing cables (making by pass arrangment to continiue the power supply) fixing the same at the suitable location shown by Engg-in-charge complete all as specified and as directed.

M&L for taking breaking the foundation out the existing electric LT Panel panle fand raising the height of the Panels by disconnecting the electrical cable connection and reconnecting them by taking shut down or making by pass arrangment to continiue the power supply complete all as specified and as directed.

Labour only for taking out existing LT/HT cable and putting the cable in new trench for the connection of DG/Transformer complete all as specified and as directed.

Disconnecting and taking up old unserviceable cable from trench/pipe cable tray etc and keeping aside for removal from site complete all as specified and as directed.

Supply and laying for under ground heavy duty XLPE insulated, armoured aluminium conductor cable 1100 volts grade, cross-sectional area 16 sqmm 4 Core core in trenches / through pipe in road crossing / plinth/ drain/ duct/ floor along pole / wall /ceillings etc complete all as specified and as directed. Note:- Earth work, bricks protection, sand cushioning shall be measured and paid seperately.

All as per item No 87 here in before but (25x4) core complete all as specified and as directed.

All as per itrm No 87 here in before but (35x3.5) core complete all as specified and as directed.

All as per item No 87 here in before but (70 x 3.5) core complete all as specified and as directed.

All as per item No 87 here in before but (95 x 3.5) core complete all as specified and as directed.

All as per item No 87 here in before but (120 x 3.5) core complete all as specified and as directed.

All as per item No 87 here in before but 150 sqmm 3.5 core complete all as specified and as directed.

All as per item No 87 here in before but 240 sqmm 3.5 core complete all as specified and as directed.

All as per item No 87 here in before but 400 sqmm 3.5 core complete all as specified and as directed.

M&L for end termination of LT Underground cables by providing single compression type chromium plated heavy duty brass cable glands including check nuts etc.and heavy duty aluminium cable lugs of suitable size including cutting holes in the gland plate and connection complete in the panel board by providing galvanised steel bolts,nuts, flat washers & spring washers complete all as specified and as directed for the cable sizes :-

3.5 C120 sq mm

3.5 C 150-240 sq mm

3.5 C 400 sq mm

Supply and fix cable jointing kit for 11 KV grade cable for outdoor termination , heat shrink type, joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, Al conductor cable of size 70 sqmm to 120 sqmm complete all as specified and as directed.

Supply and fix Heat Shrink type straight through cable jointing kit for 1.1 KV grade Under Ground XLPE insulated Aluminium Cable complete with Jointing material and other connected accessories suitable for 3.5 / 4 core 10 to 16 sqmm complete all as specified and as directed.

All as per item no 98 here in before but of size 25sqmm to 50 sqmm complete all as specified and as directed.

All as per item no 98 here in before but of size 70 sqmm to 120 sq. mm 3.5 core complete all as specified and as directed.

All as per item no 98 here in before but of size 150 sqmm to 240 sq. mm 3.5 core complete all as specified and as directed.

All as per item no 98 here in before but of size 400 sq. mm 3.5 core complete all as specified and as directed.

Supply and fixing LED security light with IP 66 protection and front toughen glass luminaries of capacity 70-75 watt with high power LED and ensure uniform light distribution complete all as specified and as directed.

Supply and fixing 1100 V grade FR PVC insulated copper cables of size 1.0 sqmm 3 core drawn through street light poles brackes/PVC conduits connecting from the junction box to street light fittings complete all as specified and as directed.

S&F thermoplastic street light junction box, weather proof having ingress protection level IP-66 and size L (254-255mm)x B (180-205mm)x H(111-112mm) dually fixed with Aluminium flat clamp and support made of 25mmx3mm/Flush in existing wall, duly painted with aluminium paint over a coat of red oxide metal prmer complete (including 1 no 5 way cable connector suitable to connect 16 Sqmm Aluminium cable 3 nos polymide cable gland having sealing range (17-25) mm complete with 1 no 19 mm PVC blend) complete all as specified and as directed.

S&F GI bracket on street light pole/ boundary wall for post top lantern made of 40 mm dia light grade GI pipe including fixing clamps, nuts and bolts,/cement work and painting with two coats of aluminium paint over a coat of red oxide metal primer complete for maximum length of 1.20mtr complete all as specified and as directed.

M&L for MCCB 4 Pole, 315-350 Amps,36 KA with rotary handle (adjustable thermal 100% - 80%) complete all as specified and as directed.

M&L for Change over switch 315 Amp 4 pole complete all as specified and as directed.

Painting in situ of feeder pillars (for external surfaces only) with two coats of 1st quality Synthetic Enamel Paint after cleaning of existing surface and removing of all loose darts and greasy spots and filling of cavities by providing putty complete all as specified and as directed. Note : Painting to be done either by using Spray Painting Machine or by using Roller. Brush should not be used.

Earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm buried directly in ground, earth pit not less than 2.25 mtrs deep below ground level, with top edge of the plate at a depth of not less than 1.5 mtrs below ground level connected to galvanized earth strip (32x6)mm dia as earthing lead by means of GI bolts, nuts and washers upto 7.5 meters length from earth chamber / fit etc all as shown in electrical plate No.3 of MES SSR Part-I and connecting to earthing test point including necessary excavation and earth work in any type of soil, returning, filling in and disposal of surplus soil to a distance exceeding 50mtrs, PCC (1:3:6) type C1 (using 20mm graded stone aggregate) earth pit, 40mm thick RCC (1:2:4) type B1 (using 20 mm graded stone aggregate) cover with suitable reinforcement, watering arrangement, funnel etc complete all as specified and as directed.

Supply and fixing galvanised iron strip of size 25 X 3 mm as earth continuity conductor or main earthing strip fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed with poles or any other indicated sitution for loop earthing etc as required complete all as specified and as directed.

M&L for Earthing complete with copper earth plate plate electrode 60cm x 60cm x 3.15 mm thick, buried directly in ground (earth pit not less than 3.25 mtrs. deep below ground level) with top edge of the plate not less' than 2.5 mtrs. below normal ground level, connected to 25x4 mm copper strip as earthing lead duly welded with the plated/other strips including GI pipe 40 mm bore (Medium grade) as earth lead protection and necessary earth work, RCC cover with handle, GI tubing medium grade 20 mm dia for watering, funnel wire mess GI bolts with washer of suitable size all as shown in electrical plate No 3 connected to earth test point all as specified or indicated incl. testing on completeion. (Note : Fresh soil will be used for filling the dug as required to achieve the desired resistance from out side, copper strip will be laid below 60 cm from ground level and connected to test point through plinth protection necessary cost of repair to plinth protection and brazing and welding deemed to be included in the item copper strip beyond 7.5 RM will be connected through double nut bolt and brazing of joints).

Taking down carefully copper/aluminium point wiring (light,fan,socket etc.) complete including fittings such as switch, ceiling rose, light fittings, regulators etc. and making good to the disturbed surface of walls, floors etc. all complete as specified and directed.

M&L for point wiring for one light/ bell/ fan controlled by one number one way switch for 5Amps SSC complete with 1100V grade FRLSH PVC insulated unsheathed multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two runs single core for phase and neutral drawn through in and including PVC concealed conduit of suitable size (minimum 20mm dia medium grade ISI Marked) complete with one run of 1100V grade FRLSH PVC insulated multistranded copper conductor cable 1.5 Sq mm single core green colour for earth continuity conductor and connecting to common earth dolly incl provn of modular type galvanized MS sheet pressed sunken box not less than 1.00 mm thick concealed on wall including fixing of modular cover plate of suitable modules with fixing screws, for fixing of modular type switches / socke t/ Fan regulator etc. complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing surrounding surface complete all as specified and directed. Note : Proper colour code of wiring to be maintained.

All as per item No.114 here in before but for 5 Amps Socket on same board complete all as specified and directed.

All as per item No. 114 here in before but for 5 Amps Socket Independent complete all as specified and directed.

All as per item No. 114 here in before but for 15 A socket point independent with 2.5 sqmm 1100V grade FRLSH PVC insulated copper conductor complete all as specified and directed.

S & F Ceiling rose, 3 terminal, PVC/ polycarbonate isolated body, 230 V complete all as specified and as directed.

S & F Modular type switch, one way 6 Amps , 1 module complete all as specified and as directed.

S & F modular type socket 5 pin, 6 Amps 2 module complete all as specified and as directed.

S & F Modular type switch, one way 16 Amps, 1 module complete all as specified and as directed.

S & F Modular type socket 5 pin, 16 Amps 2 module complete all as specified and as directed.

S & F Call bell musical door chrome AC 230 volts single pole (Ding dong Type) complete all as specified and as directed.

S & F Modular type fan regulator step type(2 module)120 Watt complete all as specified and as directed.

S & F Modular type5 Aamp bell push switch complete all as specified and as directed.

S & F modular type 32 A Motor starters (for AC) white clour complete all as specified and as directed.

M & L for making the hole for fixing the exhaust fan of size 250 mm complete all as specified and as directed.

S & F Exhaust Fan PVC body of size 250 mm heavy duty of single phase complete all as specified and as directed.

Supply and fixing TPN 4 way double door MCB DB, IP43 including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting1 and making good surfaces of wall complete all as specified and as directed.

Supply and fixing MCB TPN 40 To 100 AMP 415 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed.

Supply and MCB 06 Amps to 32 Amps, single pole, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed.

Taking down fan by dismanteling the sealing cable end, blades and depositing to MES store for reuse complete all as specified and directed.

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and as directed.

Taking down Ceiling light/Tube light and refixing with all necessary accessories complete all as specified and as directed.

Dismantling and taking down carefully sub-main wiring any size including wooden batten etc and making good the disturbed surfaces of wall/ floor to match the existing wall/ floor etc complete all as specified & directed.

Material and labour for circuit/sub-main wiring (surface type) with two run of 1100 V grade PVC insulated & unsheathed 4.0 Sqmm single core multi stranded copper conductor cable alongwith one run of 4.0 Sqmm 1100 V grade FRLSH PVC insulated & unsheathed single core multi stranded copper conductor cable for earth continuity conductor connected to common earth dolly, drawn through PVC Concealed conduit complete all as specified and as directed. Note : (i) Three runs of 4.0 Sqmm cable shall measured as one length.

Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised earth lead wire 4.00mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and as directed.

DILIP CONSTRUCTION (BID ID -3470301)

NESAIL CORPORATION (BID ID -3469936)

R.R.ENTERPRISE (BID ID -3470031)

M/S BISWANATH BHATTACHARJEE (BID ID -3469124)

GAYATRI ENTERPRISE (BID ID -3468186)

M/S J S ENTERPRISES (BID ID -3469977)

Piu Projects (BID ID -3469986)