801191E8

Amount

GENERAL SUMMARY NOTE: Schedule ‘A’ Part I to XII are prepriced by MES under Ser No. 2.00 to 13.00. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.

Lumpsum price worked out by the contractor for "Building / Structures” as listed in Schedule ‘A’ Part - I, inserted by MES

Lumpsum price worked out by the tenderer for "Site Clearance and Land Development " as listed in Schedule ‘A’ Part-II

Lumpsum price worked out by the tenderer for "Internal Water Supply " as listed in Schedule ‘A’ Part-III

Lumpsum price worked out by the tenderer for "Internal Electrification" as listed in Schedule ‘A’ Part-IV

Lumpsum price worked out by the tenderer for "Retaining Wall" as listed in Schedule ‘A’ Part-V

Lumpsum price worked out by the tenderer for "Road, path and Culvert" as listed in Schedule 'A' Part-VI

Lumpsum price worked out by the tenderer for "Sewage Disposal" as listed in Schedule ‘A’ Part-VII

Lumpsum price worked out by the tenderer for "Septic tank and Soakage pit " as listed in Schedule ‘A’ Part-VIII

Lumpsum price worked out by the tenderer for "Area Drainage" as listed in Schedule ‘A’ Part-IX

Lumpsum price worked out by the tenderer for "Compound wall, Fencing and Gate" as listed in Schedule ‘A’ Part-X

Lumpsum price worked out by the tenderer for "External Electric Supply" as listed in Schedule ‘A’ Part-XI

Lumpsum price worked out by the tenderer for "External Water Supply" as listed in Schedule ‘A’ Part-XII

Subtotal

SCH 'A' PART XIII MISCELLANEOUS ITEMS NOTE: Schedule ‘A’ Part - XIII is not prepriced by MES and prepriced rate indicated as 0.00 under Col.5 signifies this fact only. Bidder shall insert their rates in Green colour filled under Col-6.

Supply and laying double wall corrugated DWC pipe HDPE pipe of outer dia 175mm and inner dia 147mm of approved make ISI marked polythene with smooth internal wall & profiles external surfaces for non pressure for sewage complete all as specified.

M&L for 610 mm dia. (150 turns per coil) punched type Concertina coil of 0.52mm thickness as per IS 6745- 1972 with galvanised coating having barbs length (24 + 1) mm pitch between two barbs (35 + 1) mm fixed in position and secured to both sides of shaped angle iron post, weighing 8.5 Kg ( + 4%) per coil as in fencing to steel post and to another coil/ MS ribs including fixing with special galvanised fasteners such as 'J' clips, 'C' clips, 'U' clips all as specified and directed. Note : The quoted rate inclusive of clips to be provided for securing the coil. Make shall be as approved by GE.

M&L preparing previously untreated concrete wall surfaces and applying two coats of exterior weather coat emulsion paint over a coat exterior quality primer coat all as specified and directed.

Supplying, Installation testing and commissioning of 6 Mtr High pole top dia 70 mm and bottom dia 130 mm and base plate size 220x220x12 mm size pole fabricating out of medium grade tapered pole octagonal cross section and shall be continuosly tapered with single longitudinal conforming to BSEN 10025 or equivalent with base plate Fe 410 conforming to IS 2062 of suitable thickness with provision of 4 Nos foundation bolts EN 8 Gr. The pole shall be galvanized as per IS 4759/BSEN 1461 standards with average coating thickness of 66 micron inspection/housing with 6 Amp SP MCB and 32 A aluminium busbar in JB, complete end termination etc with grouting of base plate in concrete foundation 1:2:4 concrete with non shrink polymeric water proof grouting compound admixture (of CICO or equivalent). (All pole should be prewired from junction box to fixture with 2.5 sqmm size of wire and including GI brackets of 1.2 Mtr long on pole). Note : - Quoted rate are deemed to including Earth work and excavation, necessary foundation i.e. reinforcement, holding down and standards and necessary accessories for mounting light fitting on pole.

Excavating in post holes not exceeding 0.5 cum for erection of poles, removing the excavated material to a distance not exceeding 50m and providing PCC bed and RCC foundation as per manufacturer recommendations with the following specifications including formwork. (a) PCC bed 450mm x 450mm x 100mm (b) RCC column 400mm x 400mm x 1300mm, M-20 design using 4 Nos 12mm dia TMT rods and 7 Nos of 8mm TMT rods.

S&F Energy Saving and Enviornmental friendly long life LED street light 40W made up of pressure die cast aluminium housing with high power LED as lighting source and lens embeded PC cover having top opening separate driver compartment with IP 66 protection and impact resistance IK 07 with suitable driver etc. and connecting with 4.0 Sqmm Aluminium conductor PVC insulated three core weather proof cable etc, complete all as specified and as directed. Make : Havells cat No. ENDURA PEARL NEO SL 40W LED 757PASYTOPC or its equivalent in the approved makes listed here-in-after.

Material & labour for Earthing complete with galvanized steel earth electrolde 60 cmX 60 cmX6 mm buried dirrectly in ground vertically not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level connected to galvanized earth strip 32X6mm dia upto 7.5m long by means of bolts, nuts, check nuts and washer etc made of galvanized iron including 40 mm bore GI pipe medium grade up 7.5 m length all as shown on electrical plate No. 5 of SSR Pt I and as specified and indicated and testing on completion including earth work and excavation in any type of soil, PCC chamber, RCC slab with cast iron frame, funnel with water pipe GI 20 mm medium grade, wire mesh and lugs complete. Note: (i) The unit rate shall be include for protection pipe, GI water pipe, wire mesh, funnel, excavation, RCC pit cover, PCC chamber pit, test point, 32X6mm galvanized earth strip from top of earth plate up to 7.5 meters above ground level and if GI protection pipe is less than 7.5 meters, no price adjustment shall be made. (ii) PCC pit shall be provided at least 500 mm away from the earth pit and not just on the earth pit and extra cost of additional length of water pipes and fitting junction etc shall be deemed to be included in the unit rate. (iii) RCC pit thick reinforced with XPM (weighing not less than 4KG/Sqm in liew of cast iron cover.( for LT Panel)

S&F Energy Saving and Enviornmental friendly long life LED street light 150W made up of pressure die cast aluminium body toughened glass with lens, input voltage range AC 100-300 V, IP 65 protection, rated life of 50000 Hours, rated luminious flux 18000 lm, SMD light source, luminious efficiency 120 Lm/ W, colour temperature 6000K, working temperature 0-55 degree celsius, power factor > 0.95, Surge voltage 6 kV with suitable driver etc. and connecting with 2.5 Sqmm Copper conductor PVC insulated three core weather proof cable etc, complete all as specified and as directed. Make : Crompton model No LFLN 150-CDL/60-M or its equivalent in the approved makes listed here-in-after.

Supply and fixing 4 pole MCCB 63 Amp, 50 Hz, 415 V with rupturing capacity 25 KA fixed thermal & fixed Magnetic setting for existing panel all as specified and directed. Note : Rate deemed to be included of any alteration works in the panel in any requires.

Construction of masonry valve chamber, 100 mm thick foundation using PCC 1:4:8, type D-2, over 15cm thick hard core, 20cm thick solid block masonry with blocks cast using PCC 1:3:6, type C-1, set in cement mortar 1:4, 15MM thick plaster to internal surfaces and external surfaces up to 15cm below ground level and top of floor in cement and sand mortar 1:4, finished even and smooth with out using extra cement , 3.15mm thick MS sheet cover including 50mmX50mmX6mm thick MS angle frame fixed in PCC 1:2:4, type B1 coping with 25mmX6mm flat iron hold fasts, handle, hinges with locking arrangements, applying one coat of red oxide primer and two coats of synthetic enamel paint to all steel surfaces and earth work in any type of soil including disposal of surplus soil to a distance not exceeding 50M complete all as specified and shown on drawing for internal size: 600 x600x600mm

S&F rotational moulded polyethylene water storage tanks of capacity 1000 Ltrs (Cylindrical vertical with closed top) hoisted and fixed in position including ball valves high pressure of PTMT with epoxy coated Al rod & high density plastic ball screwed for iron pipe and fixed of 25mm bore dia. (Minimum weight 455gms) including PCC foundation all as specified and as directed.

Supply & Fix 2 in 1 Bib tap cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, high pressure, screwed for iron/cpvc pipe and fixed suitable for 16 mm bore cpvc pipe all as specified.

Supply & Fix chromium plated health faucet 15mm dia with all fittings complete all as specified and directed.

Supply and Fixing ceiling fan 5 star rated 1200mm sweep suitable for working of AC 230V, 50 HS with down rod, canopy with electronic fan regulator suitable for ceiling fan colour of the fan milky white including anchor flusher ceiling hook for fixing of fan on ceiling complete and connecting up including provision of three core flexible PVC cable with stranded copper conductor of size 1.5Sq.mm from ceiling rose to connector of ceiling fan all as directed and as specified.

Supply and Fixing Exhaust fan 225mm sweep single phase 230V 50HS heavy duty 1400 rpm energy efficient smooth functioning with suitable size of louvers for protection when not in use, silent operation, rust proof body and blades with fixing arrangements, opening of hole all as directed.

Supply and Fix LED type tube light fittings 4 feet long 1x20W 230V ,decorative ultra slim square profile liner LED lighting fixture with extruded polycarbonate environmental friendly, energy efficient tubelight life time 40000 burnig hours, Lumen output 2000lm, colour temperature 6000K, Surge protection of 2kV with voltage protection 160-360V, power factor > 0.9 complete and prewired for LED tube complete fix to wall/ ceiling by suitable down rods, PVC round blocks and connection by flexibe PVC cable with stranded copper conductor from ceiling rose to connector of the fitting including 1x20W LED tube complete all as specified and as directed. Make : Phillips Cat No.BN021C LED 20S PSU CW GR S2 or its equivalent in the approved makes listed here-in-after. Note : Three years guarantee shall be given as per manufacturer instructions or for the life time of 40000 burning hours whichever is earlier as applicable.

S & F 10 Watt LED fittings with surge protection of 2 KV with wide voltage protection 160-360 Volt, lumen output 900lm complete all as directed by. Philips Cat No-BN010C LED 20S PSU CW GR S1 or its equivalent in the approved makes listed here-in-after.

S & F building street light 30 Watt capacity LED including electronic driver IP 65 protection, fixing withsuitable size of brakets 1.2 mtr long bend to shape including clamp nut and bolt, connected fron celing rose or existing point all as directed by Engr-in-Charge. Philips Cat No BRP046LED30 CW MR S1 PSU or its equivalent in the approved makes listed here-in-after.

Supply and fix miniature circuit breaker of Capacity MCB SP 230 Volts, 10 KA, 6 to 32 Amps 'C' curve

Supply and fix miniature circuit breaker of Capacity MCB SPN 230 Volts, 10 KA, 6 to 32 Amps 'C' curve

Supply and fix miniature circuit breaker of Capacity MCBB 4 Pole 415 V, 32 - 100 Amps 16 KA Capacity Make L & T/Schinder/Legrand

S & F TV socket/ Telephone socket complete all as specified and directed.

Subtotal

CITY CONSTRUCTION COMPANYU

Binod Hawlader

Prasur Electricals & Engineering Co.