SPECIAL REPAIRS TO BUILDING NO P-19 AT P-BLOCKS, SCHOOL OF ARTY UNDER GE DEOLALI

Amount

Taking down frame with shutters area n exc 1.5 Each(without taking of shutter from frame etc) complete all as directed.

Taking down frame with shutters area exc 1.5 and n.exc 4 Sqm Each(without taking of shutter from frame etc) complete all as directed.

Taking down shutters exc 1 sqm and n.exc 2 sqm each all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc complete all as specified and directed.

M&L light shade Virified Ceramic tiles 10 mm thick (square/ rectangular), polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including15mm thick screed bed in cememt mortar 1:6 complete all as directed.

M&L coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick joint free glossy finish, set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cememt mortar 1:4 complete all as directed.

M & L for Non - skid/Glossy finish/Matt finish joint free coloured ceramic tiles 7 to 8 mm thick (square/rectangular) laid in floors area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. with and including 15mm thick screed bed in cememt mortar 1:6 , set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as directed.

Demolition of plain cement concrete(un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) etc complete all as directed.

M & L for PCC 1:4:8, type D2, 75mm thick, using (40mm graded stone aggregate) as in sub- base floor complete all as specified and directed.

M&L for Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with m s. square tube, suppling & fixing in opening as per specification & drawing.

S&F factory made with particle board core solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.

S&F powder coated (min 50 micron thickness) aluminium frame for doors, windows, ventilators, partitions with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F powder coated (min 50 micron thickness) aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws, roller etc. complete all as specified

S&F powder coated (min 50 micron thickness) aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F powder coated (min 50 micron thickness) aluminium window /ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as roller, peg stays, locking arrng, suitable handles complete all as specified

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and avg width of aperature 1.40 mm and fixed with stainless steel wire staples etc complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and avg width of aperature 1.40 mm and fixed with stainless steel wire staples etc complete all as specified and directed.

M&L for 4mm thick frosted Sheet glass, ordinary quality and glazing with oil putty n exc 0.5 sq. m in each pane.

S&F in repair 18/19mm thick Block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face, including teak wood lipping 6mm thick allround the shutter as in cup board/kitchen cabinet etc fixed with screws to timber frame work complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

S&F 12mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination including teak wood lipping 6mm thick allround the shutter as in cup board/kitchen cabinet etc fixed with screws to timber frame work complete all as specified and directed.

S&F for 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete.

S & F stainless steel butt hinges medium weight 100 mm size etc complete all as specified and directed.

S & F continuous (piano) hinges, width of flaps 30mm (when open) mild steel, bright finish or electro galvanised complete all as specified and directed.

S & F in repair 150 mm size extruded aluminium handles fabricated type, anodised all as specified and directed.

All as per item No 25 above but 100mm size.

S & F in repair 150 mm size aluminium anodised barrel tower bolts of extruded sections all as specified and directed.

All as per item No 27 above but 100mm size.

S & F in repair 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple & fixed clips of sheet, cast or extruded section & fixed bolts & sliding bolts of extruded section or cast aluminium alloy all as specified and directed.

S & F in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor for length 150 mm cover plate all as specified and directed.

S & F 100 mm size Aluminium anodised hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and directed.

S & F 75mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws

S & F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 all as specified and directed.

Demolition of stone slabs and tiles laid bedded in any mortar of any description or thickness in floors, aprons etc

M&L for 20mm thck Granite (of any colour / type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like including 15mm thick screed bed in cement mortar 1:6 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding or chamfered edges complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations.

Taking up or down 15mm bore of pipe steel tubing and connections,including cleaning for refixing or removal from site by the contractor at his own expenses etc complete all as directed.

All as per item No 37 above but 20mm bore.

All as per item No 37 above but 25mm bore.

S&F for 15 mm bore of tube medium grade Galvanised steel water tubing with all fittings and fixed complete to walls,floors etc complete all as specified and directed.

All as per item No 40 above but 20mm bore.

All as per item No 40 above but 25mm bore.

S&F in repairs 32mm bore Unplasticiscd PVC pipes of pressure rating 10 kgf/cm2 including all fittings laid in trenches all as directed.

S& F in repairs PVC ( SWR ) floor trap plain with grating including jointing with solvent cement of 75 mm dia etc complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as specified and directed.

S & F in repair overhead shower 140mm dia round shape single flow with air effect (ABS body and face plate chrome plated )with rubit cleaning system etc complete all as directed. Make- Jaquar model No OHS-CHR-1757 or equivalent

S & F in repair Hand shower 100mm dia round shape single flow (ABS body chrome plated with grey face plate )with rubit cleaning system etc complete all as directed. Make- Jaquar model No HSH-CHR-1937 or equivalent

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long with bracket & guard rail complete all as specified and directed.

S&F in repair wall mixer 3 in 1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe,connecting legs wall flane(without hand &overhaed shower) (Make- Jaguar MODEL NO.-FUS-CHR-29281 or equivalent etc complete all as directed.

S&F in repairs 20mm dia stainless steel curtain rod heavy grade fixed in brackets etc complete all as specified

S&F in repairs single towel rail, 600 MM long etc complete all as specified and directed.make ' Jaquar ' Model No .ACN-CHR-1111NM or equivalent

S & F in repair vitreous china wash down water closet pan (pdedestal pattern )in single piece i.e. WC and UF seat cover ,hinges,fixing assessory set ,cistern & fitting size 655x365x765 mm, P trap 180mm and fixed complete all as specified and directed. Make- Jaquar model No LYS-WHT-38851P180UFSM or equivalent

S & F in repairs wall hung basin with fixing accessories of size 610x465x275 mm full Pedestal complete all as specified and as directed. make-jaquar model no.-QPS-WHT-7803PM or equivalent

S&F in repairs 15 mm size fancy type Bib taps with wall flange, brass chromium plated screwed down both ends for iron pipe or for union and fixed etc complete all as specified and directed. (Make- Jaquar Model No.-FUS-CHR-29037 OR eqivalent

S&F in repairs 15mm size fancy type Pillar taps with 200mm extension body, brass chromium plated, screwed down both ends for iron pipe or for union and fixed etc complete all as specified and directed. (Make- Jaquar Model No.- FUS-CHR-29021 OR EQUIVALENT

S&F in repairs 15mm size fancy type chromum plated angular Stop valves with wall flange screwed both ends for iron pipe or for unions and fixed etc complete all as directed. Make -jaquar model No.-FUS-CHR-29053 or equivalent

S&F in repairs brass chromium plated fancy type health faucet with 8mm dia 1.2 m long flexible tube and wall hook etc complete all as directed. Make -Jaquar model No.-ALD-CHR-573 OR EQUIVALENT

S&F in repairs 110 mm bore dia PVC ( SWR grade ) pipes single socketed , in any length with rubber ring joints, fixed to walls including necessary fittings for pipes etc complete all as specified and directed.

S&F in repairs 75 mm bore dia PVC ( SWR grade ) pipes single socketed , in any length with rubber ring joints, fixed to walls including necessary fittings for pipes etc complete all as specified and directed.

Taking down existing water proofing treatment of any description, thickness and in any position including removal of rubbish of the premises etc complete all as directed.

M&L for cement concrete type B0 1:2:4 (using 12.5mm graded stone aggregate) 25mm thick as in roof to achieve slope on existing roof surface all as directed.

M&L 15mm thick screed bed in CM 1:6 on roof slab using water proofing compound @ 3% by weight of cement finshed even and smooth without using extra cement etc complete all as directed. Note : Water proofing compound will be measured and paid separately.

M & L for water proofing treatment to RCC roof slab as specified below and as directed by Engineer-in-Charge :- (a) Applying a uniform coat of bitumen primer @ 0.70 kg/sqm over cement plaster. (b) 3 mm th plain texture and weighing not less than 3.00 kg/sqm Atactic Polypropylene Polymer (APP) modified bitumen based prefabricated five layer water proofing membrane reinforced with non woven polyster (wt not less than 150 gms/ sqm) matt black finished over compatible primer at 0.4 Ltr / sqm of density at 25 degree centigrade 0.87 - 0.89 kg/ltr and viscosity 70-160 cps or cold sticker and torch application of membrane with overlap while torching shall be 150 mm on length side and 100 mm on width side. after necessary preparation of surface complete as per manufacturers instructions.M/s Fosroc Chemicals “Proofex Torchseal 3PI/4PI/Antiroot Plain” or M/s STP Limited “Super Thermolay APP PL/MT/Superior Shaliplus/industrial bitumen,ShaliTex Primer” or M/s Sika India Pvt Ltd “Sika WP Shield 103P/PM / Sika WP Shield 104P/PM) or equivalent as approved by GE. (c) Apply two coats of bitumastic - aluminium paint over the membrane.

M&L for cast in situ PCC 1:2:4 type B-1 (20 mm graded stone aggregate) in side kerbs with ,coping and inclusive of formwork as required etc all as directed.

M & L Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel')

S & F Mild steel 1 .25 mm thick plain black sheet covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded ifdirected, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. required ®

S&F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

M&L for special treatment to sunken portions of Toilet by demolition of existing treatment of any description and thickness,removal rubbish outside MD land, 10mm thick plaster in cement mortar (1:4) with water proofing liquid conplast 421 of make Fosroc or equivalent as specified and applying one coat of each Nittoproof 100 and Nittoproof 120 of M/S Fosroc or equivalent as specified on plastered surface and rendering again 10mm plaster in cement moratr (1;4) mixed with conplast 421 of M/S Fosroc or equivalent as specified in Sunken portion and CI pipe joints shall be filled/jointed with mixture of cement, fine, sand and Nittoproof 130 of M/S Fosroc or equivalent as specified and provide hole in the wall and fix 600mm long and 20mm dia GI spouts light grade and PCC (1:5:10) type E-2 using 40mm graded stone aggregate filling in sunken portions , floor area of WC& Bath upto 5.50 Sqm complete all as specified and directed.

Dismantling of PVC water tanks of capacity exc 500 ltr and n exc 1000 ltr as as specified and directed.

S&F 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore of pipe ball brass valves, high pressure, with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed etc complete all as directed.

S&F 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe all specified and directed.

S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe all specified and directed.

BLANK

Taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 using water proofing compound @ 3% by weight of cement finshed even and smooth without using extra cement etc complete all as directed. Note : Water proofing compound will be measured and paid separately.complete.

Supply only Integral water proofing compound.

M&L for rendering 5mm thick in CM 1:3 on fair faces of brick work or concrete ceiling surfaces complete.

M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying one coat of alkali resistant primer over a coat of 2mm thick birla white cement putty,sanding the surfaces till smooth finish is obtained and finally applying two coats of oil emulsion distemper etc complete all as directed.

M&L for complete removal of existing treatment on surfaces of ceiling , removal of unnecessary nails with mechanical means/grinder, including filling of cracks/holes by crack filler etc,two coat white wash complete all as specified and as directed.

M&L for complete removal of existing treatment on surfaces of wall, removal of unnecessary nails with mechanical means/grinder, including filling of cracks/holes by crack filler etc, preparing surface by one coat of 3mm thick putty and applying one coats of oil emulsion distemper over one coat of primer complete all as specified and as directed.

M&L for complete removal of existing treatment on surfaces of walls, removal of unnecessary nails with mechanical means/grinder, including filling of cracks/holes by crack filler etc, preparing surface by one coat of 3mm thick putty and applying two coats of oil emulsion distemper over one coat of primer complete all as specified and as directed.

M&L for preparation of New decorated plastered or unplastered surfaces of walls/ceiling and applying two coats of weather emulsion (APEX or Equivalent, white/red colour or as specified and directed by Engr-in-charge) by by roller/ brush over one coat of primer over 2mm thick Asian Wall Putty Suprema for levelling and smoothening, complete all as specified and directed.

M & L for preparation of new wood surfaces of any description exc 10 cm width or girth and applying two coats of synthethic enamel paint over a coat of pink primer all as specified and directed.

M&L for complete removal of existing treatment on surfaces of walls/ceiling, applying two coats of weather emulsion (APEX or Equivalent, white/red colour or as specified and directed by Engr-in-charge) " over one coat of primer over 2mm thick Wall Putty for levelling and smoothening, including removal of unnecessary nails, filling of cracks/holes ,repair/crack filler mortar, including preparation of old decorated plastered or unplastered surfaces of walls/ceiling complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40 mm graded agg as in plinth protection 75 mm thickness, finished even and smooth without using extra cement with and including 10mm wide and 30mm deep joints at every 2.4mtrs interval and at every change in direction filled with bitumastic compound etc complete all as specified and direted.

M&L for machine cut cudappah stone slab 20-25mm thick over and including 15mm thick CM 1:6 screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete etc complete all as directed.

S&F in repairs 75mm bore of pipe PVC (SWR) bends any radius with access door etc complete all as directed.

All as per item no 89 above but 110mm dia

S&F in repairs 75mm bore of pipe PVC (SWR) branch piece, single (single Y) equal or unequal with access door etc complete all as directed.

All as per item no 91 above but 110mm dia

S&F in repairs 75mm bore of pipe PVC (SWR) junction single,(Single T) equal or unequal with access door etc complete all as directed.

All as per item 93 above but 110mm dia

Demolation of Stone slabs and tiles of any description or thickness laid bedded in cement mortar of in floors, aprons etc.

Demolition of Concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as directed.

M&L for TMT Bars Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding mild steel wire (annealed) not less than 0.9mm dia or securing with clips) complete.

M&L for RCC, type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in drain cover slabs, deck slabs, shelves and the like all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed.

M& L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:4 on brick/concrete external surfaces of walls finish etc complete all as directed.

S&F for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing or concealed etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

Taking down carefully unserviceable copper/aluminium point wiring of any description including all fittings (switch , socket, switch socket combination, lamp holder, ceiling rose, regulator etc.) and making good disturbed surfaces of wall, floor etc. to match with existing finishes complete all as specified and as directed.

Dismantling and taking down unserviceable main switches, DB etc. any type / size and making good disturbed surfaces to match with the existing finishes complete all as specified and as directed.

Material and labour for point wiring with two runs of stranded copper conductor PVC insulated sheathed 1.5 Sqmm FRLS cable in and including PVC casing caping of suitable size with PVC boards of appropriate sizes and all requisite accessories complete with PVC terminals box for mounting switches, sockets, fan regulators etc with one single core continuous 1.5 Sqmm,FRLS copper cable for earth wire complete all as specified and as directed for One light point controlled by one switch.

All as per Item No 105 but One fan point controlled by one switch

All as per Item No-105 but One 3 pin socket outlet 5 Amps on the same board.

All as per Item No-105 but One 3 pin socket outlet. 5 Amps on the independent. board

One 15 A socket outlet independent with 2.5 sq mm PVC cable and 1.5 sqmm cable as earth continuity wire.

S&F Ceiling rose, 3 terminal, PVC / Polycarbonate insulated body

Supply and fix switch piano flush type single pole one way 6 Amps complete all as specifed .

M & L for switch socket combination 3 pin 6 Amps flush type (multi purpose ) complete all as specified and as directed.

M & L for switch socket combination 2 in 1, 3 pin, 6 and 16 amp flush type universal complete all as specified and as directed.

S&F surface/wall mounted LED Light fittings, regal Batten Double side for LED Tube suitable for T8 LED 4 feet long lamp, with 18 W LED, with suitable driver complete all as specified and as directed. Make: Havells (Cat No: REGALBATTENT 5UPTO1X18WDSBSWH + CRYSTAL 1213T8DSTL18WLED865SGLASS) or equivalent in Crompton Greaves / Bajaj

S&F wall mounted LED Light fittings, 2 feet long, with 9 W LED and suitable driver complete all as specified and as directed. Make: Havells (Cat No: LUMILINEBS9WLED865SPCWH) ) or equivalent in Crompton Greaves / Bajaj

Taking down light fittings any type and S&F Decorative wall light fixture with made up of Polycarbonate, B22 base with 10 Watt LED lamp all as specified and as directed . Make: Havells city-2 LHDL03160099) or equivalent in Crompton Greaves / Bajaj

Supply & Install in replacement of building security light 30W LED energy saving Luminaire With high Power LED as light Source, Symmetric type including required size of GI bracket ,accessories, clamps and eletric connections complete all as specified and as directed. Make : Havells (Cat NoENDURAPEARLSL30WLED757SASYTOPCMP

S&F Plug & Socket DB, CRCA Sheet steel, powder coated, with metal plug & socket 3 pin with 20 Amps MCB SP 240 Volts complete as specified and directed Make : L&T (Cat No: DBMPPS332SD)

S&F Powerline Vertical TPN DB with suitable for 160A MCCB incomer, double door (IP-54), 8 Ways, built- in 250 Amps copper busbar for each phase complete suitable for 415 Volts, AC, 50 Hz complete all as specified and as directed Make : Legrand (Cat No: 507752)

S&F Thermal Magnetic relese MCCBs, 4 pole, 415 volts, breaking capacity 25 KA, rating 160 Amps, complete all as specified and as directed. Make: Legrand- Cat no 17498 /C&S/L&T

S&F MCB, SP,240 volts, breaking capacity 10 KA, rating 40 to 63 amps, complete all as specified and as directed. Make: L&T / Legrand /C&S/Havells

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE, including dismantling of old fan and depositing E/m store. Complete all as specified

Supply and Fixing/Install New Exhaust Fans PVC body 200 MM Sweep with accessories and eletric connection including taling down old exhaust fan and depositing E/M store yard complete all as specified and as directed. Make:-Havells Ventil Air DX / DX-HS White

S & F storage type water heater electric driven suitable for 240 V 50 Hz of capacity 25 Ltrs including taking down old u/s water heater any type and deposite to the MES Store yard and all as specified Make :Havells GHWAPDTWB025 /CG/ Bajaj.

Earthing complete with galvanized mild steel earth plate electrode size 600x600x6mm thick buried directly in ground (Preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 1.5 meter (BGL) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire upto 5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 part-I, connected to test point complete, all as specified and testing on completion.

M/S SAMEER SUBHASH PATANI

Rehoboth Buildcon

singh construction co