PROVISION OF SWIMMING POOL AT SURATGARH MILITARY STATION

Lump sum price worked out by the tenderer for “BUILDING WORK" as listed in Schedule ‘A’ Part - I

Subtotal

Lump sum price worked out by the tenderer for “INTERNAL ELECTRIFICATION WORK" as listed in Schedule ‘A’ Part - II

Subtotal

Lump sum price worked out by the tenderer for “INTERNAL WATER SUPPLY WORKS" as listed in Schedule ‘A’ Part - III

Subtotal

Lump sum price worked out by the tenderer for “ROAD , PATH & CULVERTS WORKS" as listed in Schedule ‘A’ Part - IV

Subtotal

Lump sum price worked out by the tenderer for “AREA DRAINAGE WORKS" as listed in Schedule ‘A’ Part -V

Subtotal

Lump sum price worked out by the tenderer for “SEWAGE DISPOSAL WORKS" as listed in Schedule ‘A’ Part VI

Schedule ‘A’ Part - VI (SEWAGE DISPOSAL WORKS)

M&L for DWCPE (SN8) 180 (OD)/163(ID) mm pipe conforming to IS-16098 complete laid in trenches and jointed alongwith necessary jointing materials etc complete laid complet all as specified.

Soakage wells , excavation in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete incl intercepting chamber and screen chamber made of brick masonry in CM, RCC cover slab in M25/SFRC cover, interconnecting pipes of RCC/DWC complete all as per Drg (50 users).

Subtotal

Lump sum price worked out by the tenderer for “COMPOUND WALL, FENCING & GATE" as listed in Schedule ‘A’ Part -VII

Subtotal

Lump sum price worked out by the tenderer for “EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part -VIII

Schedule ‘A’ Part - VIII (EXTERNAL WATER SUPPLY)

Cutting existing DI water pipe line 200 mm bore and inserting of flanged Tee 200x200x150 mm - 01 Nos with flanged socket 200 mm - 02 Nos, and jointing with rubber gasket, nut bolt etc. and making leak proof joint complete and making new connection with 200 mm DI water pipe line. Note:- Rate encludes the cost of cuttings of pipe, jointing of pipe and jointing material i.e. rubber gaskets, nut bolts, washer etc, and DI special fittings as required complete.

Supplying, laying, jointing and testing of size 150 mm bore, centrifugally, cast (Spun) ductule iron pressure pipe with spigot and sockete ends, class K-9, ISI marked, confirming to IS: 8329/2000 blast furnace slage cement with portland cement properties suitable for rubber gasket jointing / tyton joints including rubber gasket for joint and laid on floor/ In trenches. Note:- (i) Rate includes the cost of rubber gasket for joints. (ii) DI fittings shall be measured and paid seperately.

M&L for Construction of brick masonry valve pit of internal size 90cm x 90cm x 90cm including necessary excavation and earth work in soft/loose soil, brick work, plastering, white wash, PCC coping, MS frame made out of angle iron of size 40mmx40mmx6 mm, MS sheet cover of 3 mm thick fixed to angle iron frame by means of hinges welded to frame and painting with 2 coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces and grouting the frame in PCC 1:2:4 type B-1 including handle and locking arrangement with one number 50 mm dia brass pad lock, complete all as specified and directed by Engineer - in - Charge Note :-(i) Brick wall shall be 23 cm thick built in cement mortar (1:4) (ii) Internal plaster shall be 15 mm thick in cement mortar (1:4) and external plaster upto 450mm from top shall be 20mm thick in CM (1:6) and remaining external surface shall be flush pointing in CM (1:6) as the work proceeds. (iii) PCC in foundation shall be 15 cm thick in cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate extended 15 cm all around from the external face of the walls. (iv) PCC coping shall be 15 cm thick in cement concrete ( 1:2:4) type B-1 using 20 mm graded stone aggregate including grouting of angle iron frame in PCC. (v) Two coats of white wash to internal surfaces of valve pit. (vi) Depth of wall pit shall be reckoned from the top of PCC in foundation.

All as per above item but valve pit with internal size 120 mm x 120 mm x 120 mm

S&F DI fittings confirming to IS-9523-2000 such as bends (any type, radius and angle), tapers any type (straight, bend, increasing, decreasing or double socket etc), tee pieces, single branch, 'Y' junction, double branch, cross collar, caps and plugs, blank flange etc. suitable and socketed pipes.

Subtotal

Lump sum price worked out by the tenderer for “SITE CLEARANCE AND EARTHWORK" as listed in Schedule ‘A’ Part -IX

Subtotal

Lump sum price worked out by the tenderer for “ARBOURICULTURE WORK" as listed in Schedule ‘A’ Part -X

Schedule ‘A’ Part - X (ARBOURICULTURE WORK)

S&F Inermi Hedge boundary plantation trees , 1 to 3 feet plants including 1 years old. Digging pit size 0.75 x 0.75 x 0.75 filling with manure pesticides including removing surplus soil to a distance not exc 250M.

Maintance of plant/hedge grass by weeding, hosing, watering, saucer making once in 15 days (every month in alternaate day ) for plant/ hedge, insect and pest management (as and when required ), as directed by Engineer-in-Charge pruning new plants in place of dead plants of same species and height tunining with out extra cost to the department complete all as specified and as directed by Engineer -in-charge. (Note Manure & pesticide required for maintenance of plant under this item shall be arranged by the contractor at his own cost and cost of the same shall be deemed to included in the rate quoted against this item)

Subtotal

Lump sum price worked out by the tenderer for “RAIN WATER HARVESTING" as listed in Schedule ‘A’ Part -XI

Subtotal

Lump sum price worked out by the tenderer for “AIR CONDITIONING AND SUMMER APPLIANCES as listed in Schedule ‘A’ Part -XII

Schedule ‘A’ Part - XII (AIR CONDITIONING AND REFRIGERATOR)

S&F desert cooler made of 0.8 mm galvanised steel (ISI marked IS: 277 latest) with zinc coating not less than 100 gms/sq meter, aluminium blade, wood wool pads, electric driven single phase, 230 volt AC, haviing minimum nominal air flow capacity of 4000 Cubic meter per hour with 280 watt copper wounded motor and water submersible pump (IS:11951) with 1.5 mtr head and sump tank made with 1.0 mm sheet with drain plug and all internal surfaces of steel body cooler paintd with water resistant paint (IS 9862 latest) complete as specified and directed.

Supply of Air cooled Heat Pump delivering actual capacity as per the following parameters, Heat pump shall be rated at Nominal Input Power-200 Watt with Output Heating capacity - 8 KW, Electrical Backup - 2.2 KW having Inbuilt Tank capacity - 450 litres having glass lining. WEater Temp in efficiency mode using compressor should be 65 degree C. Heat pump should have all the safety protections like high/low voltage, high temperature, refrigeratnt leak, compressor overheating protection with operational noise level not more than 60 dbA. Heat pump should have a user freindly control panel to set the desired temperature showcasing the actual temp.

Subtotal

Schedule ‘A’ Part - XIII (Filtration and chlorination plant)

Filtration System

Supply of vertical fibre glass filter of 2.00M dia made of polyester shell with a liner employing special version with polypropylene arm collector, and PVC distribution network with a net filtering area of 3.14Sq.m capable of filtering @123000Ltr / hr / at 40000Ltrs / Sq.mt/ hr of filter bed area with inlet & outlet opening of 160mm dia flange. as per standard design for the efficient working of the system complete with first charge of the filter media. ( out let size cannot be lesser than 125mm dia)

Model : AS2000C

Make:AQVASTAR/ASTRAL/CERTIKIN

FILTER MEDIA

Supply of Grade 1 Eco Glass Media 20kg in bags

CODE: ASGM1

MAKE : WATER CO

Supply of Grade 3 Eco Glass Media 20kg in bags

CODE: ASGM3

MAKE : WATER CO

Make:AQVASTAR/WATERCO/CERTIKIN

Supply of Valve batteries made in Zinc plated steel, consisting of 5 Nos, 160mm dia PVC butterfly Valve, suitable mounting supports, pressure gauge with required size inlet. outlet, flanges & 2 support brackets with suitable clamps & fixing screws. ( valve size cannot be lesser than 125mm dia & respeCtive piping)

Make:AQVASTAR/ASTRAL/CERTIKIN

Recirculation Pump( 5 Duty/ 1 Standby)

Supply of Centrifugal self-priming pump with high hydraulic efficiency, chemical resistant and ultra-quiet operation. Integrated along with IP-55 protection- class F continuous rating high efficiency IE3 motors. Pump shall be of two-piece body made in polypropylene 30%+ GF, integrated polypropylene 30% + GF pre-filter with strainer basket, fast opening translucent transparent polycarbonate lid, easy opening metal knob lid system, 316 SS Shaft and mechanical seal. Bronze impeller, flanged end connections 125mm suction & 100mm return union connections, Horse power: 10 HP,7.5 Kw, Phase: III phase 400V, FLOW CONDITIONS =125m³/hr @ 13 m water head. with 5 year warranty ( MAXIMUM POWER CANNOT BE MORE THAN 10HP & IT MUST BE IE3 MOTORS)

Make:AQVASTAR/ASTRAL/CERTIKIN

Supplying of manual chlorine dosing system 20LPH @ 5 BAR with pH controller and necessary pumps, along with 500 LTR mixing tanks and 900MM manual agitators

Model : ASCDP2007

Supply of Commercial VGE UV system Model VGE pro 600-219 is designed to work at Medium pressure capable to dose UV at a rate of 400J/m2. The unit shall be made of SS316L body with U shape irradiation reactor chamber with 6 BAR maximum pressure rating. The unit shall be capable to work around 140 cumtr/ hr flow with a 125mm connection. The unit shall used AOP , Advanced oxidation processes . The UV comes with control panel and monitor with sensors to check UV & temperature. The units UV Lamp shall be placed to perpendicular to the direction of flow. The Lamp base shall be equipped with SMART PIN TECHNOLOGY where the lamp shall be removed when the system is pressurised. The UV lamp expected life time shall be 16000 hrs. The end connections shall be of 125mm dia SS flanges. .( Multiple qty of residential not allowed)

CODE: BL600-219

MAKE: BLUE LAGOON /ASTRAL/Triozen

PIPES , VALVES & CABLE QUANTITY

Supply of UPVC 10 kg/sqcm Piping including necessary fitting such as Elbows, Bends, Sockets, Tees, Collars, Nipples, Reducers, Stub Ends, diminishing pieces, Solvent Cement, etc. for Swimming Pool Inlet & Drain & Suction piping, Swimming Pool filtration plant piping, drain pipe along the pipe periphery including all fittings, fixtures and Ceiling/ Wall Support System suitable for following uPVC pipe as specified and directed.

a) 315mm dia - 10Kg pipe

b) 250mm dia - 10Kg pipe

c) 200mm dia - 10Kg pipe

d) 160mm dia - 10Kg pipe

e) 63 mm dia - 10Kg pipe

Make:Supreme/Astral/Finolex

Valves

Supply of butterfly valves with standard lever. Confirming to BS

Standards with necessary flanges, nuts and bolts etc., complete.

a) 315mm dia Butterfly Valve With Flange adaptors

b) 250 mm dia Butterfly Valve With Flange adaptors

c) 160mm dia Butterfly Valve With Flange adaptors

Supply of U-PVC Non return valve confirming to BS Standards with necessary flanges, nuts and bolts etc complete

a) 315mm dia Flap check Valve with flange adaptors

b) 160mm dia Flap check valve with flange adaptors

Make:AQVASTAR/COMER/CEPEX

Subtotal

Lump sum price worked out by the tenderer for “EXTERNAL ELECTRIC SUPPLY" as listed in Schedule ‘A' Part -XIV

Schedule ‘A’ Part - XIV (EXTERNAL ELECTRIC SUPPLY)

Supply and installation of 11 KV Compact Sub Station with non extensible RMU consisting of 1 No manually operated 11 KV/630 Amp VCB in SF6 insulated stainless enclosure, HT cable /Bus bar, 1 Nos transformer 160 KVA ,11 KV/433 CRT dry type & associated LT devices complete as directed.

Supply, Install, testing & commissioning factory made Out door type dust and vermin proof Feeder pillar LT panel board cubical double door hinged type compartmentalized of suitable size 415 volts, AC 50 Hz fabricated of CRCA sheet 3 mm thick machine pressed and angle iron frame 50mm x 50mmx 6mm grouted in PCC 1:2:4 type B1 (20mm grade stone aggregated) powder coated inside and outside complete including 4 poles aluminium bus bar of suitable size mouned on porcelain insulators and enclosed in chamber made out od 2mm thick CRCA sheet machine pressed and connection from incoming and outgoing electric cable with suitable size thimbles / lugs cable gland with open able shutters on both side and comprising of the following :-

(i) in comming MCCB 200 Amp, 50 KA, 4 Pole 415 Volt - 01 Nos

(ii) Out going MCCB 63 Amp, 36 KA 4 Pole 415 Volt, - 01 Nos

(iii) out going MCCB 32 Amp 4 pole 415 volt 10 KA - 03 Nos

(iv) Aluminium bus bar for 3 Ph & Neutral 300 Amp- 01 Set

(v) Volt meter 0-500V

(vii) Phase indicator lamps for 3 Ph -01 Set

M & L for auguring under road, pavement, hard standing, railway lines by trenchless technology using latest boring technique and necessary machine incl HDPE pipe of suitable size of any dia/ bore/size complete all as specified and as directed.

Supply and laying double wall corrugated pipe (DWC), non-metallic, Resistance to Compression : Type 450, Resistance to Impact: Normal, Resistance to Bending : Pliable, Resistance to External Influence: Ingress Protection : IP 67, Resistance against Corrosion : Without Protection, Resistance to Flame Propagation : Non Flame Propagating, Nominal outside diameter 90 mm, minimum inside dia 37 mm conforming to IS 16205 (Part 24) : 2017 complete all as specified and as directed.

Subtotal

Lump sum price worked out by the tenderer for “FURNITURE" as listed in Schedule ‘A' Part -XV

Schedule ‘A’ Part - XV (FURNITURE)

CHAIR VERANDHA

The chair shall be made to shape, size and design all as indicated on drawing. Mild steel conduit of wall thickness 1.6mm of dia as shown on drawing shall be provided. Bending, welding, turning and other items / fittings shall be done / provided as specified in relevant IS as per engineering norms, patterns as directed by GE. All exposed surfaces of steel shall be finished with two coats of synthetic enamel paint over a coat of red oxide primer with spray machine. Hard rubber toe shall be provided to all legs as shown on drg. Rest all as shown on drawing

FORM WITH BACK

Over all size shall be of 1800X510X900MM. Wooden seat shall be of teak wood in one piece and of size 1800mm long 255mm wide and 25 mm thick bolted to frame with 3 mm dia GI nut bolt and washers. Steel frame shall be 1500mm long in such a way that teak wood seat shall project 150mm from frame on each side .Back rest shall be of teak wood and 1800mm long,150mm wide and 19mm thick .The back rest shall be 1800mm long the width is 300mm at bottom and 255 mm at top of wooden plank.Legs shall be 25mm MS tube of wall thickness 1.6mm. Steel frame shall be provided with 25mm square MS tube 16 gauge . All Dimensions, shape and size shall be followed as per drg. All wooden expose surfaces shall be french polished two coats after preparation of surfaces and steel portion shall be painted with synthetic enamel black paint

FORM WITHOUT BACK

Over all size shall be of 1800X510X900MM. Wooden seat shall be of teak wood in one piece and of size 1800mm long 255mm wide and 25 mm thick bolted to frame with 3 mm dia GI nut bolt and washers. Steel frame shall be 1500mm long in such a way that teak wood seat shall project 150mm from frame on each side .Legs shall be 25mm MS tube of wall thickness 1.6mm. Steel frame shall be provided with 25mm square MS tube 16 gauge . All Dimensions, shape and size shall be followed as per drg. All wooden expose surfaces shall be french polished two coats after preparation of surfaces and steel portion shall be painted with synthetic enamel black paint

PEG TABLE

Overall size shall be of 450mm long, 300mm wide and 380mm high. All wood shall be first class hard wood Teak. Top of the table shall be of 18mm thick pre-laminated MDF board approved shade and texture by Engr-in-Charge with 4mm teak wood / PVC edging all round the top of table as directed by Engr-in-Charge. Two numbers top short rails of section 20mmx40mm shall be provided connecting legs. One number bottom long stiffener of section 20mmx40mm shall be provided connecting centre of bottom short rails. Hard PVC rings shall be screwed to legs. All wood surfaces exposed to view when placed in position shall be French polished with high gloss finish. Rest all as shown on drawing.

LOCKER BED SIDE STEEL

Overall size shall be 760mm long, 600mm wide and 1100mm high. The locker shall be made of mild steel sheet 1mm thick.20 mm dia conduit pipe shall be chrome plated with wall thickness of 1.6 mm shall be fixed with side sockets.Two handles chromium plated 100mm long shall be fixed to shutters with necessary riveting . One hasp and staple 75mm long shall also be fixed to shutters with riveting.The left shutters shall be provided with 100mm long tower bolt inside at upper and lower ends also.The locker shall be provided with compartments as shown in drgs made of 1mm MS sheet. All steel surface internally and externally, exposed to view when placed in position except front two shutter shall be given two coats of off white and front two shutter shall be paint with Dark Maroon over a coat of primer with spray machine after preparation of surfaces. Rest all specifications are as per drg .

Subtotal

Please Enable Macros to View BoQ information