SPL REPAIR TO ROADS IN EAST WING AND WEST WING OF HATTIGOR AND REPAIR/MAINT TO INTERNAL ROADS AND ROAD FURNITURE AT RANGIYA UNDER GE RANGIYA

Amount

M & L for repair to potholes any depth and not exceeding 1 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths, etc., cutting around edges to at least 25mm in depth, making good by applying tack coat with bituminous primer @ 5kg per 10 Sqm, putting in screened & graded road metal, watering & well ramming (including supply of road metal) Complete all as specified and as directed

Material and Labor for 100 mm thick (Compacted thickness) WBM, with coarse aggregate of grading 3 (90 to 40 mm size), with Granite ,trap,or Basalt spread rolled and consolidated to gradient and camber required. with 8 to 12 tonne power roller complete all as specified and as directed.

M&L preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the clean surface with gunny bags to remove all loose dirt etc including applying evenly a priming/tack coat with bituminous primer using paving bitumen @5 Kg per 10 sqm complete all as specified and directed.

All as per item No 3 above but paving bitumen@10 Kg per 10 Sqm

M&L for bituminous premix semi dense asphaltic concrete 40mm consolidated thickness with 5.5% binder content by weight of total mix, rolled and compacted to requried camber and gradient complete all as specified and directed

M&L Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) completed all as specified and directed

M & L for continuous brick edging with width equal to width of brick laid dry on end vertically with burnt clay bricks of old size sub class 'B' bricks incl dismantling existing brick edging complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry, laid dry complete all as specifeid and directed

M & L for providing and applying 2.5mm thick road marking strips (retro reflective) with glass beads of specified shade/colour using hot thermoplastic material by fully/semi automatic thermoplastic material applicator machine filled with profile shoe, glass beads dispensers, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P cleaning the road surface of all dirt, seals, oil, grease and foreign materials etc., complete all as specified and as directed .

S & F in repair two way reflective cat eye studs not less than 100mm x 100mm x 18.5mm made of ABS plastic body of high compressive strength with electronically welded prismatic retro reflective lense on both sides for maximum retro reflection in wet & dry condition fixed as per manufactures instructions on the road surface including removal of old unserviceable studs complete all as specified and as directed. (Model No DA 978 of Make : Dark Eye or equivalent in 3M/ACE/AUTOMAT as approved by GE.

Supply and fix in repairs solar road studs size 125mm x 125mm x 25mm made up of high compresive strength materials of aluminum alloy to sustain over 10 tonnes weight ,100% water proof design according to IP65 ,with minimum 3 super bright LED lens on each opposite sides (2 sides only), with inbuilt solar panel of high effciency mono crystalline not less than 2.4V /0.3 watt with recharge battery not less than 1.2 V /1600 MA and fixing the stem firml;y into road surface as per manufacture instruction by hammering /embedding including removal of old unservicable studs complete all as specifeid and directed by Engr -in-Charge. (Model : Dhruv of make : Dark eye or equivalent in 3M/ AUTOMAT/ ACE/SUN EYEZ as approved)

S&F in repair delineator post size 900mm long made of 50mm bore MS pipe of light grade painted with stove enamelled black paint and 3 Nos of retro reflective high intensity grade sheeting in White/ Red/Yellow colours each size 100mm high bounded on it and delineator post 30cm long protection cage of MS welded Zinc plated 12 gauge wire mesh of size 30mmx30mm, top of pipe welded with 3mm MS plate and bottom welded with 5mm thick plate of size 125mm X 125mm including PCC foundation of size 150x150x300mm with PCC 1:3:6 type C1 incl necessary earthwork excavation in any soil, removal and disposal of spoil complete all as specified and directed

M & L for 40mm thick (consolidated thickness) bituminous premix carpet with 0.54 cum of stone chipping mixed with 29.20 Kg of binder (using paving bitumen) laid with mechanical paver, rolled and compacted to required camber and gradient with exceeding 8 ton but not exceeding 12 ton power roller to a uniform smooth surfaces complete all as specified and directed.

M & L for liquid seal coat with binder @ 9.8 Kg per 10 Sqm (paving bitumen) blinding with 6.3mm size stone chippings @ 0.09 Cum per 10 Sqm rolled and compacted with exceeding 8 ton but not exceeding 12 ton power roller to a uniform smooth surfaces complete all as specified and directed.

S&F convex mirror used for traffic control and road safety purpose made for heavy quality glass and weather proof easy to mount convex mirror with stand with 100mm dia MS pipe with impact resistance, bright reflection of 100cm including excavation in post holes with filling of PCC 1:3:6 and removing the debris to premises of MD land complete all as specified and directed

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the IRC specifications shall be followed. 2. Unless otherwise specified the rates shall deemed to include the cost of form work shuttering etc., required for complete and proper execution of the work. Refer Schedule "A" notes for details.

M/s DEBOJIT ROY