Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.7 LAccepted-AOC 15 EMERSON ROAD DANAPUR CANTT PATNA 801101 | PATNA | PATNA | BIHAR | 801101 | L1 | Accepted-AOC OK | |
| 2 | L2₹14.9 L+₹20,842.60 (1.41%)Rejected-Finance H O PRABHAT KUMAR SINHA RAGHUNATH TOLA ANISABAD PATNA 800002 | PATNA | PATNA | BIHAR | 800002 | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹15.6 L+₹90,704.40 (6.16%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
Refer Docs
EMD Value
₹40,000
Closing Date
18 May 2022, 6:00 pmClosed
GE (AF) Bihta
GE (AF) Bihta PIN 801103
Repair/maint/Replacement of UNSV CI/GI pipe line, pumping set, panel board and allied works including cleaning of overhead reservoir at (AF) Stn Bihta
2022_MES_503574_4
8194/BHT/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
Bihta
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (AF) Bihta
₹40,000
Yes
8 Jul 2022
19 Apr 2022
23 May 2022
19 Apr 2022
18 May 2022
30 Apr 2022
Amount
Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr deep in soft / loose soil and getting out for under ground cable/Pipe lines / erection of poles, stays etc complete all as specified and directed.
Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and directed.
Removing of excavated material to a distance n exc 50 mtr and depositing where directed at a level n exc 1.5 mtr above the starting point complete all as specified.
M&L for PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate for foundation, mass filling in pole pit etc. complete all as specified and directed.
M&L for PCC 1:3:6 type C-2 using 20 mm graded crushed stone aggregate for foundation, mass filling in water supply pits complete all as specified.
S & F in replacement of old unsv MCCB triple pole 125 Amps with thermal magnetic trip and earth link connectors in LT control panel board where directed and making necessary electrical connections complete all as specfied and directed. Make : Schneider/Havells/ABB/L&T
M&L for cleaning of overhead reservoir internal portion from base to top including scraping of mud silt from base and walls, washing complete internal surfaces by using bleaching powder, antibacterial sodium hypochlorite solution, removing the silt/mud water out side the tank and de-silting from connecting pipes and applying internally one coat of lime wash to RCC walls, base of tanks of 50000 gallons capacity upto 30 mtrs staging complete & writing details of cleaning in prescribed format complete all as specified and directed. Location : Pump House No 2 (Near MES Colony) Note : Cleaning of reservoirs shall be carried out the gap in between 4-5 months or as and when required/ demanded by the Engr-in-Charge.
Description all as per item Ser No 7 above, but for 75000 gallons capacity Location : Pump House No 3
Description all as per item Ser No 7 above, but for 5000 gallons capacity Location : Tropo & Ops Area
M&L for rendering 10 mm thick in cement mortor 1:6 on fair faces of brick or concrete surfaces complete all as specified and directed.
M&L for two coats of synthetic enamel paint over a coat of red oxide primer including preparation of old rusted surface of steel exc 10 cm width/grith, at any height of tank and water supply vertical pipes of pumping and distribtion lines as per existing colour code and marking of arrow for flowing of water with black/white paint complete all as specified and directed.
S&F in replacement of water level indicator panel complete set showing stepwise indication of level of water with sensor suitable for 75000 Gallons capacity over head RCC tank and making electrical connection and testing complete all as specified and directed.
S&F in replacement of damaged/unsv water level sensor with controller unit not less than 10 mtr head, where directed and testing upto the satisfaction of Engr-in-Charge.
M&L for rewinding of burnt submersible pumping set of capacity 25/30 HP capacity with the existing gauge of copper winding wire with same insulation including replacement of old bearings complete all as per standard norms and testing upto the entire satisfaction of Engr in-charge.
Taking out old unserviceable DI/CI pipe with all fittings from the trenches of following sizes complete all as specified and directed :- (Note : Excavation and earth work will be measured & paid seperately under respective item.) (a) 150 mm dia bore
(b) 100 mm dia bore
(c) 80 mm dia bore.
Supply only DI pipe of 150 mm bore ISI marked, spigot and socketed type, Class K-7 centrifugally cast suitable for rubber tyton joints complete all as specified and directed. Make: Electro Steel / Tata / NECO/ Kesoram / Rashmi Metaliks
Description all as per ser item No 18 here-in-before but for 100 mm bore
Description all as per ser item No 18 here-in-before but for 80 mm bore
Laying only DI/CI pipe new or old position in trenches where directed and testing complete all as specified:- (Note : Excavation and earth work will be measured & paid seperately under respective item.) (a) 150 mm dia bore
b) 100 mm dia bore
(c) 80 mm dia bore.
M&L bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces, single branch. "Y" junction, double branch, cross (all ends sockets or socket and spigot) collars, caps and plugs upto 150 mm bore for spigot and socketed pipes complete.
M&L bends, tapers, Tee pieces (single & double branch) any type and angle / radius and straight connecting pieces etc but all ends flanged upto 150 mm bore for flanged pipes complete all as specified.
Taking out old unserviceable GI tubing with all fittings from trenches, walls, floors etc of following sizes complete all as specified and directed :- (Note : Excavation & earth work will be measured & paid seperately under respective item.) (a) 80 mm bore
(b) 50 mm bore
(c) 25 mm bore
(d) 20 mm bore
Supply and laying GI pipe medium grade ISI marked with all fittings, laid in trenches of following sizes complete all as specified and directed by Engineer-in-Charge :- (a) 80 mm bore
Description all as per ser item No 30 here-in-before but of size 50 mm bore
Description all as per ser item No 30 here-in-before but of size 25 mm bore
Description all as per ser item No 30 here-in-before but of size 20 mm bore
Cutting of existing cast iron pipe and reducing to required length before laying in position for insertion of new tee, branch connection or any other means etc for 150 mm bore CI pipe complete all as specifed and directed by Engineer-in-Charge.
Description all as per ser item No 34 here-in-before but for CI pipe 100 mm bore
S&F Gun metal gate valve 50 mm bore, ISI marked with iron wheel head, screwed down high pressure, screwed both ends for iron pipe including taking down old unserviceable one complete all as specified and directed by Engineer-in-Charge.
Description all as per ser item No 36 here-in-before but of 40 mm bore
Description all as per ser item No 36 here-in-before but of 25 mm bore
Description all as per ser item No 36 here-in-before but of 20 mm bore
Description all as per ser item No 36 here-in-before but of 15 mm bore
M & L for lead wool joints for spigot and socket pipes and fittings with all jointing materials like spun yarn etc complete all as specified and directed for the following sizes:- (a) 150 mm bore
(b) 100 mm bore
(c) 80 mm bore
M & L for run lead joints for spigot and socket pipes and fittings with all jointing materials like spun yarn etc complete all as specified and directed for the following sizes:- (a) 150 mm bore
(b) 100 mm bore
(c) 80 mm bore
S & F in replacement of unsv/damaged 15 mm bib tap cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
M&L for brick masonry valve pit of internal size 1200mm x 1200mm x 1200mm with one brick thick wall using sub class ‘B’ brick in cement mortar 1:6 over 20 cm thick PCC plateform with 15 cm off sets on every side of 1:3:6 type C-1 including plastering of internal surfaces and exposed surfaces with 15 mm thick plastering in cement mortar 1:4 and 50 mm thick RCC cover slab (in two equal parts of PCC 1:2:4 type B-1 with 10 mm dia deformed bars at 10 cm interval on both side with binding wire including necessary form work with 150mm dia hole in the center etc. complete all as specified and directed by Engineer-in-Charge.
Description all as per ser item No 48 here - in- before but of size 900mm x 900mm x 900mm ditto
Description all as per ser item No 48 here - in- before but of size 600mm x 600mm x 600mm ditto
Supply and fixing in repair butterfly valve, lever operated, pressure rating PN-1.6, water type nitrile rubber lining, suitable insertion between flange ends, 150 mm nominal bore ISI marked complete with MS tail pieces double side flanged including welding work as per site requirement, rubber/fiber board gasket, nut & bolt, washers etc complete all as specified and directed by Engr-in-Charge. Make : BIR/L&T/ZOLOTO/Ramco
Description all as per ser item No 51 here-in-before but of 100 mm bore
Description all as per ser item No 51 here-in-before but of 80 mm bore
Labour only for disconnecting unsv/defective electric connections and lifting the unserviceable pumping sets 25/30/35 HP from the bore well and lowering of submersible pump sets after repairing including M&L for replacement of gaskets , suitable size of steel nuts, bolts and washers of suitable size complete all as directed by Engineer-in charge including transportation to workshop and back to site complete.
M&L for MS pipe heavy grade of 150 mm dia with both side heavy duty MS flanged, welded, drilling of holes for tightening of nuts bolts and washers including provn of rubber gasket of 3 mm thick for each joint and making/fixing nozzle for feed chlorine in lquid form with pipe including painting with black colour suitable for drinking purpose (inner side) & two coat of synthetic enamled paint (black) over one coat of red oxide primer (outer side) complete all as specified and directed by Engineer- in - Charge. MAKE: TATA /JINDAL/BANSAL”
S&F CI Sluice valve with flanged ends of size 150 mm dia, class PN-1.6 complete with gun metal or stainless steel spindle and cast iron hand wheel including rubber / fiber board gasket, nuts, washer etc including taking down old/ unserviceable sluice valve complete all as specified and directed by Engineer-in Charge. Make : BVI/ Kirloskar/ Kishor/Kartar
Description all as per item Ser No 56 but for 100 mm dia
Description all as per item Ser No 56 but for 80 mm dia
S & F in replacement of unsv lead acid battery with existing DG Set at various location of capacity 12 volt DC 74 AH including replacement of battery terminals complete all as specified and directed. Make : Cummins/Exide Note : The battery shall have warranty of 24 months for effective working and the contractor will submit warranty card to this effect during execution to EIC.
Supply only calcium based granular disinfectant for water treatment more stable than chlorine gas and stronger than bleaching powder and sodium hypochloride packing in 45 KG plastic drum. Make :- Purichlor/Aquafit/Altoch CH/Altoch GP
SHIV SHAKTI TRADERS
SANYOG CONSTRUCTION PRIVATE LIMITED
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .