Repair/Renovation of Poultry Shed at Kathua

Amount

Dismantling Asbestos sheet roofing including ridges, hips valleys and gutters etc., and stacking the material incl. all leads and lifts

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground incl. all leads and lifts

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking of area of 3 sqm. and below all leads and lifts

12 mm cement plaster of mix 1 : 4 ( 1 cement : 4 fine sand) including all leads, lifts and carriage of material by M.T / H.L.

Providing wood work in frames of Sal wood in doors, windows, clerestory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately)

Providing and fixing 35 mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excl. panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.Second class deodar wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Particle Board 12mm thick Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked

Providing and fixing 35mm thick glazed shutters of Second class deodar wood for doors, windows and clerestory windows using 10 kg/ sqm (4 mm thick) glass panes including black enameled ISI marked M.S. butt hinges with necessary screws.

Providing and fixing 35 mm thick Wire Gauze shutters using galvanised M.S. wire gauge of average width for aperture 1.4 mm in both direction with wire of dia. 0.63 mm for doors, windows & clerestory windows with hinges & necessary screws. ISI marked M.S. pressed bright finished butt hinges with necessary screws of req. size. Second Class deodar wood.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.

Applying one coat of water thinnable cement primer of approved brand & manufacture on wall surface.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work

Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of “L” shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-in-charge.

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Proofing asbestos cement 6mm thick corrugated sheets roofing and fixing with G. I J, or L hooks, bolts and nuts 8mm dia, G.l plain and bitumen washers complete excluding the cost of purlins, rafters and trusses : corrugated sheets upto 60 degrees pitch

Providing and fixing ridges and hips in asbestos cement sheet roofing. One piece plain angular ridges

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover & suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.PN

PN-16 pipe , 25mm OD(SDR-7.4)

PN-16 pipe ,20 mm OD(SDR-7.4)

Providing and fixing PPR Unions 25mm

Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C automatic flushing cistern, with fittings, standard size G.I./ PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and in C.P brass coupling complete, including painting offittings and cutting and making good the walls and floors etc. whereverrequired:Range of three squatting plates with 10 liter P.V.C. automatic flushing cistern.

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 complete job.

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Wash basin size 550x400 mm with a 15 mmCP Brass single hole basin mixer

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings

M/S DEVINDER KUMAR

M/S DEEPAK KUMAR GUPTA

PAWAN KUMAR

VIJAY KUMAR

AMNEET PAUL SINGH

M/S Anirudh Dutt

KIRPAL SINGH LALOTRA

RAHUL SHARMA GOVT CONTRACTOR