REPAIRS TO BED PLY WOOD TOP, BED HARD DOUBLE / SINGLE, LADIES WOODEN TABLES AND REPLACING WITH SUNMICA TOP ON VARIOUS TYPES AND CERTAIN WOODEN FURNITURE INCLUDING SFC UNITS AT BSO (S) UNDER GE (SOUTH) SECUNDERABAD

Amount

BED PLYWOOD TOP Removing the existing unserviceable/ damaged long rail and S&F new 1st class hard wood (teak wood) long rail of size 1980 x 100 x 35 mm The replaced members to be French polished after filling the cracks, joints & uneven surfaces with wax & then polish with 2 coats of French polish to match with the original colour of the item complete all as specified and shown on drawings (FD - 246).

Removing the existing unserviceable stiffners (supporting pieces) and S&F new 1st class hard wood (teak wood) stiffners of size 900 x 40 x 60 mm The replaced members to be French polished after filling the cracks, joints & uneven surfaces with wax & then polish with 2 coats of French polish to match with the original colour of the item complete all as specified and shown on drgs (FD - 246).

Removing the existing unserviceable legs of Head Board and S&F new 1st class hard wood (teak wood) legs of size 60 x 60 x 660mm The replaced members to be French polished after filling the cracks, joints & uneven surfaces with wax & then polish with 2 coats of French polish to match with the original colour of the item complete all as specified and shown on drawings (FD - 246).

Removing the existing unserviceable legs of Foot Board and S&F new 1st class hard wood (teak wood) legs of size 60 x 60 x 500mm The replaced members to be French polished after filling the cracks, joints & uneven surfaces with wax & then polish with 2 coats of French polish to match with the original colour of the item complete all as specified and shown on drawings (FD - 246).

Removing the existing unserviceable 4mm thick plywood from both sides of head board frame and S & F new 4mm thick plywood one side teak finish of size 460 x 900mm, for both sides of head board The replaced members to be French polished after filling the cracks, joints & uneven surfaces with wax & then polish with 2 coats of French polish to match with the original colour of the item complete all as specified and shown on drawing. Note : Plywood on both sides of head board will be measured as single unit for the purpose of payment. Drg No FD-246

Removing the existing unserviceable 4mm thick plywood from both sides of foot board frame and S & F new 4mm thick plywood one side teak finish of size 300 x 900mm, for both sides of foot board The replaced members to be French polished after filling the cracks, joints & uneven surfaces with wax & then polish with 2 coats of French polish to match with the original colour of the item complete all as specified and shown on drawings (FD - 246). Note : Plywood on both sides of foot board will be measured as single unit for the purpose of payment

Removing the existing unserviceable/ damaged Plywood top carefully and S & F 12mm thick plywood top commercial BWR grade of size 1800mm x 900mm fixed with suitable screws and to be French polished after filling the cracks, joints & uneven surfaces with wax & then polish with 2 coats of French polish to match with the original colour of the item complete all as specified and shown on drawing. Note : The unit rate quoted shall be deemed to include for connected minor repairs whereever necessary. Drg No -246

S&F New teak wood bracket of size 75 x 75 x 25 mm duly french polished, fixed with steel screws 02 Nos of size 35/8mm to support leg and long rail all as directed by Engr-in-Charge Drg No FD - 246.

BED Hard Double Removing the existing unserviceable long rail and S&F new 1st class hard wood (teak wood) long rail of size 1900x100x35 mm, the replaced members to be French polished after filling the cracks, joints & uneven surfaces with wax & then polish with 2 coats of French polish to match with the original colour of the item complete all as specified and shown on drawing. Drg No TD - 391.

Removing the existing unserviceable stiffners (supporting pieces) and S&F new 1st class hard wood (teak wood) stiffners of size 1800x50x25mm The replaced members to be French polished after filling the cracks, joints & uneven surfaces with wax & then polish with 2 coats of French polish to match with the original colour of the item complete all as specified and shown on drgs (TD - 391).

Removing the existing unserviceable Plywood carefully and S & F 12mm thick plywood commercial on both side, BWR grade 02 Nos, each of size 1800mm x 900mm fixed with suitable screws complete all as specified and shown on drawing. Note : 2 Nos plywood each of size 1800 x 900 mm will be measured as single unit for the purpose of payment. Drg No TD-391.

BED Hard Single Removing the existing unserviceable long rail and S&F new 1st class hard wood (teak wood) long rail of size 1900 x 100 x 35mm, The replaced members to be French polished after filling the cracks, joints & uneven surfaces with wax & then polish with 2 coats of French polish to match with the original colour of the item complete all as specified and shown on drawings (TD - 392)

Removing the existing unserviceable stiffners (supporting pieces) and S&F new 1st class hard wood (teak wood) stiffners of size 900 x 50 x 25mm The replaced members to be French polished after filling the cracks, joints & uneven surfaces with wax & then polish with 2 coats of French polish to match with the original colour of the item complete all as specified and shown on drgs (TD - 392).

Removing the existing unserviceable Plywood and S & F 12mm thick plywood commercial, BWR grade of size 1800mm x 900mm fixed with suitable screws complete all as specified and shown on drawing. Drg No TD-392.

APO WOODEN BED GODREJ Removing the unserviceable long rail made out of 25mm prelaminated particle board S&F New 25mm Pre-laminated particle board long rail of size 78" x 6" x 25 mm as per sample and directed by Engr-in-charge (TP)

Removing the existing unserviceable head board and supply and fixing new 25mm thick prelaminated particle board of size 36" x 22" x 25 mm head board as per sample and as directed by Engr-in-charge (TP).

Removing the existing unserviceable Foot board and supply and fixing new 25mm thick prelaminated particle board foot board of size 36" x 18" x 25 mm foot board as per sample and as directed by Engr-in-charge (TP).

Removing the exisiting unserviceable Plywood top and S & F New 12mm thick Plywood top of size 78" x 34" x 12 mm as directed by Engr-in-charge (TP).

Table dressing Gents with mirror Removing the existing unserviceable broken mirror of Table dressing Gents with mirror and S&F new mirror 5 mm thick size of 760x380mm complete all as specified and shown on drawings Drg No FD-31/230/379.

Removing the existing unserviceable frame of mirror of Table dressing Gents with mirror and S&F new frameof size 25x20mm made out of 1st class hard wood (teak wood) including polishing and providing two key plates and replace the worn out 6mm plywood BWR grade back of size 790x410mm complete all as specified and shown on drawings Drg No. FD-31/230/379.

Removing the unserviceable top and bottom of table dressing gents and S&F new top and bottom of size 300x900mm made out of 12mm thick pre-laminated particle board with 4mm thick teak wood beading all round including polishing complete all as specified and shown on drawing. Drg No. FD-31/230/379. Note: Each top PB and bottom PB shall be measured seperately for the purpose of payment.

Removing the unserviceable back of box of Table dressing gents and S&F new back of 12mm thick teak wood plank in one piece of size 900x155mm including tightening all loose components as specified and directed as per Drg No FD-31/230/379.

Removing the unserviceable sides and partitions of Table dressing gents and S&F new sides and partitions of 12mm thick prelaminated particle board teak shade of size 300 x 150 mm as shown in Drg No FD-31/230/379. Note: Each side and partition shall be measured seperately for the purpose of payment.

Removing the unserviceable front of drawer of Table dressing gents and S&F new front of drawer of 12mm thick prelaminated particle board teak shade with aluminium anodized knob in dark brown shade complete all as specified and shown on Drg No FD-31/230/379

Removing the unserviceable sides of the drawers of Table dressing gents and S&F new sides of the drawers of 12mm thick teak wood plank all as specified and shown on Drg No FD-31/230/379

Removing the unserviceable bottom of drawer of Table dressing gents and S & F new bottom of drawer of 6mm thick plywood commercial all as specified and shown on Drg No FD-31/230/379

Removing the unserviceable back of drawer of table dressing gents and S&F new back of drawer of 12mm thick plywood commercial all as specified and shown on Drg No FD-31/230/379

Removing unserviceable knobs of drawers of table dressing gents and S&F new aluminium anodized knobs dark brown shade as specified and shown on Drg No FD-31/230/379

Table dressing ladies with mirror Removing the exisiting unserviceable broken mirror of Table dressing ladies with mirror and S&F new mirror 5mm thick size of 1220x365mm all as specified and shown on drawing. Drg No FD-32/251/378.

Removing the existing unserviceable frame of mirror of Table dressing ladies with mirror and S&F new 1st class hard wood (teak wood) frame of size 25x18mm and replace the worn out plywood with 6mm plywood of size 1250x410mm comercial complete all as specified and shown on drawing. Drg No. FD-32/251/378.

Removing the unserviceable top of table dressing ladies and S&F new top made out of 18mm thick prelaminated particle board of size 385x900mm with 4mm thick teak wood beading all round including polishing and all as specified and shown on drawing. Drg No FD-32/251/378.

Removing the unserviceable drawer complete of Table dressing ladies and S&F new drawer made from 12mm thick prelaminated particle board teak shade with 4mm thick teak wood beading all round including polishing and bottom fixed with 6 mm thick plywood commercial and providing new aluminium anodized knob in dark brown shade complete all as specified and shown on drawing. Drg No FD-32/251/378.

Removing the exisiting unserviceable/ broken sliding glass and replacing with new 4mm thick sliding glass of table dressing ladies with mirror of size 300x270mm, complete all as specified and shown on drg drgs No FD-32/251/378.

Table Dining 6 persons Dismantling of unserviceable leg and S&F with New leg of 1st class teak wood, all joints to be fixed with bamboo pins, wooden screws where required on completion of repair and the complete item to be french polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then polishing two coats of French polish all as specified and shown on drawing. Drg No. FD-30/239/273

Dismantling of unserviceable long rail of table dining 6 persons and S&F with New long rail of 1st class teak wood, all joints to be fixed with Bamboo pins, wooden screws where required on completion of repair, the complete item to be french polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of French polish as shown in drawing and as specified as directed by Engr-in-Charge Drg No FD/30/239/273

Dismantling of unserviceable short rail of table dining 6 persons and S&F with New Short rail of 1st class teak wood , all joints to be fixed with Bamboo pins, wooden screws where required on completion of repair, the complete item to be french polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of French polish as shown in drawing and as specified as directed by Engr-in-Charge. Drg No. FD-30/239/273

Table Dining 8 persons Dismantling of unserviceable leg of table dining 8 persons and S&F with New leg of 1st class teak wood, all joints to be fixed with bamboo pins, wooden screws where required on completion of repair, The complete item to be french polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of French polish all as specified and shown on drawing. Drg No FD-30/239/273

Dismantling of unserviceable long rail of table dining 8 persons and S&F with New long rail of 1st class teak wood, all joints to be fixed with Bamboo pins, wooden screws where required on completion of repair, the complete item to be french polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of French polish as shown in drawing and as specified as directed by Engr-in-Charge Drg No FD-30/239/273

Dismantling of unserviceable short rail of table dining 8 persons and S&F with New short rail of 1st class teak wood, all joints to be fixed with Bamboo pins, wooden screws where required on completion of repair, the complete item to be french polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of French polish as shown in drawing and as specified as directed by Engr-in-Charge. Drg No FD-30/239/273

Table 3'x2' with and without drawer Dismantling of unserviceable leg and S&F with New leg of 1st class teak wood, all joints to be fixed with bamboo pins, wooden screws where required and the complete item to be french polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then polishing two coats of French polish all as specified and shown on drawing. Drg No FD-41/42/223/224/283/284

Dismantling of unserviceable long rail of table 3'x2' with and without drawer and S&F with New long rail of 1st class teak wood, all joints to be fixed with Bamboo pins, wooden screws where required on completion of repair, the complete item to be french polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of French polish as shown in drawing and as specified as directed by Engr-in-Charge Drg No. FD-41/42/223/224/283/284.

Dismantling of unserviceable short rail of table 3'x2' with and without drawer and S&F with New short rail of 1st class teak wood, all joints to be fixed with Bamboo pins, wooden screws where required on completion of repair, the complete item to be french polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of French polish as shown in drawing and as specified as directed by Engr-in-Charge Drg No. FD-41/42/223/224/283/284.

Dismantling of unserviceable stiffner of table 3'x2' with and without drawer and S&F with New stiffner of 1st class teak wood, all joints to be fixed with Bamboo pins, wooden screws where required on completion of repair, the complete item to be french polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of French polish as shown in drawing and as specified as directed by Engr-in-Charge Drg No. FD-41/42/223/224/283/284.

Removing the unserviceable drawer complete of Table 3' x 2' with drawer and S&F new drawer made from 12mm thick prelaminated particle board teak shade with 4mm thick teak wood beading all round including polishing and bottom fixed with 6 mm thick plywood commercial and providing new aluminium anodized knob in dark brown shade complete all as specified and shown on drawing. Drg No. FD-41/224/283

Table 900x900x760mm Dismantling of unserviceable leg of table 900x900x760mm and S&F with New leg of 1st class teak wood, all joints to be fixed with Bamboo pins, wooden screws where required on completion of repair, the complete item to be french polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then appling two coats of French polish as shown in drawing and as specified as directed by Engr-in-Charge Drg No. FD-88/291.

All same as per item No. 45 here-in-before but front/side rail. Drg No. FD-88/291.

Table writing Dismantling of unserviceable leg of table writing and S&F with New leg of 1st class teak wood, all joints to be fixed with Bamboo pins, wooden screws where required on completion of repair, the complete item to be french polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of French polish as shown in drawing and as specified as directed by Engr-in-Charge Drg No. FD-33/249/275

Dismantling of unserviceable long rail of table writing and S&F with New long rail of 1st class teak wood, all joints to be fixed with Bamboo pins, wooden screws where required on completion of repair, the complete item to be french polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of French polish as shown in drawing and as specified as directed by Engr-in-Charge Drg No. FD-33/249/275

Dismantling of unserviceable short rail of table writing and S&F with New short rail of 1st class teak wood, all joints to be fixed with Bamboo pins, wooden screws where required on completion of repair, the complete item to be french polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of French polish as shown in drawing and as specified as directed by Engr-in-Charge Drg No. FD-33/249/275

Dismantling of unserviceable stiffener of table writing and S&F with New stiffener of 1st class teak wood, all joints to be fixed with Bamboo pins, wooden screws where required on completion of repair, the complete item to be french polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of French polish as shown in drawing and as specified as directed by Engr-in-Charge Drg No. FD-33/249/275

Removing the unserviceable drawer complete of Table writing and S&F new drawer made from 18mm thick prelaminated particle board teak shade with 4mm thick teak wood beading all round including polishing and bottom fixed with 6 mm thick plywood commercial and providing new aluminium anodized knob in dark brown shade complete all as specified and shown on drawing. Drg No. FD-33/249/275

Dismantling of unserviceable door shutter of table writing and S&F with New door shutter made out of 18 mm prelaminated particle board exterior grade and providing aluminium anodized knob in brown shade complete fixed with continious piano hinges with wooden screws and providing 1st class teak wood beading all round including polishing the shutters as directed by Engr-in-Charge. Drg No. FD-33/249/275

Dismantling of unserviceable side of table writing and S&F with New side of table writing and supply and fix box made our of 18/19mm prelaminated particle board exterior grade duly fixed with wooden screws of 1st class teak wood, all joints to be fixed with Bamboo pins, wooden screws where required on completion of repair, the complete item to be french polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of French polish as shown in drawing and as specified as directed by Engr-in-Charge Drg No. FD-33/249/275

Dismantling of unserviceable back side of the box of table writing and S&F with New back side of the box made out of 6mm plywood OST to be fixed as per drawing of 1st class teak wood, all joints to be fixed with Bamboo pins, wooden screws where required on completion of repair, the complete item to be french polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then polish two coats of French polish as shown in drawing and as specified as directed by Engr-in-Charge Drg No. FD-33/249/275

Removing unserviceable knobs of door shutters and drawers of table writing and S&F new aluminium anodized knobs brown in shade as specified and shown on Drg No FD-33/249/275

Teapoy Dismantling of unserviceable Leg of Teapoy and S&F with New Leg of 1st class teak wood, all joints to be fixed with Bamboo pins, wooden screws where required on completion of repair, the complete item to be french polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of French polish as shown in drawing and as specified as directed by Engr-in-Charge Drg No. FD-34/278

Dismantling of unserviceable long rail of Teapoy and S&F with New long rail of 1st class teak wood, all joints to be fixed with Bamboo pins, wooden screws where required on completion of repair, the complete item to be french polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of French polish as shown in drawing and as specified as directed by Engr-in-Charge Drg No. FD-34/278

Dismantling of unserviceable short rail of Teapoy and S&F with New short rail of 1st class teak wood, all joints to be fixed with Bamboo pins, wooden screws where required on completion of repair, the complete item to be french polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of French polish as shown in drawing and as specified as directed by Engr-in-Charge Drg No. FD-34/278

Dismantling of unserviceable stiffner of Teapoy and S&F with New Stiffener of 1st class teak wood, all joints to be fixed with Bamboo pins, wooden screws where required on completion of repair, the complete item to be french polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of French polish as shown in drawing and as specified as directed by Engr-in-Charge Drg No. FD-34/278

Table Centre Dismantling of unserviceable leg of Table Centre and S&F with New Leg of 1st class teak wood, all joints to be fixed with Bamboo pins, wooden screws where required on completion of repair, the complete item to be french polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of French polish as shown in drawing and as specified as directed by Engr-in-Charge Drg No. FD-235/274.

Dismantling of unserviceable long rail of Table Centre and S&F with long rail of 1st class teak wood, all joints to be fixed with Bamboo pins, wooden screws where required on completion of repair, the complete item to be french polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of French polish as shown in drawing and as specified as directed by Engr-in-Charge Drg No. FD-235/274.

Dismantling of unserviceable short rail of Table Centre and S&F with New short rail of 1st class teak wood, all joints to be fixed with Bamboo pins, wooden screws where required on completion of repair, the complete item to be french polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of French polish as shown in drawing and as specified as directed by Engr-in-Charge Drg No.FD-235/274.

Dismantling of unserviceable Stiffener of Table Centre and S&F with New stiffener of 1st class teak wood, all joints to be fixed with Bamboo pins, wooden screws where required on completion of repair, the complete item to be french polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of French polish as shown in drawing and as specified as directed by Engr-in-Charge Drg No. FD-235/274.

Peg table Dismantling of unserviceable leg of Peg table and S&F with New Leg of 1st class teak wood, all joints to be fixed with Bamboo pins, wooden screws where required on completion of repair, the complete item to be french polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of French polish as shown in drawing and as specified as directed by Engr-in-Charge Drg No. FD-25/236/277.

Dismantling of unserviceable front rail of Peg table and S&F with New Front rail of 1st class teak wood, all joints to be fixed with Bamboo pins, wooden screws where required on completion of repair, the complete item to be french polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of French polish as shown in drawing and as specified as directed by Engr-in-Charge Drg No. FD-25/236/277.

Dismantling of unserviceable short rail of Peg table and S&F with New Short rail of 1st class teak wood, all joints to be fixed with Bamboo pins, wooden screws where required on completion of repair, the complete item to be french polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of French polish as shown in drawing and as specified as directed by Engr-in-Charge Drg No. FD-25/236/277.

Dismantling of unserviceable side stiffener of Peg table and S&F with New Side stiffener of 1st class teak wood, all joints to be fixed with Bamboo pins, wooden screws where required on completion of repair, the complete item to be french polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of French polish as shown in drawing and as specified as directed by Engr-in-Charge Drg No. FD-25/236/277.

Table Bed side Dismantling of unserviceable Top of table Bed side and S&F with New top of 1st class teak wood 12mm thick, all joints to be fixed with Bamboo pins, wooden screws where required on completion of repair, the complete item to be french polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of French polish as shown in drawing and as specified as directed by Engr-in-Charge Drg No. FD-28/210/248/276.

Dismantling of unserviceable Bottom of table Bed side and S&F with New Bottom of 1st class teak wood 12mm thick, all joints to be fixed with Bamboo pins, wooden screws where required on completion of repair, the complete item to be french polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of French polish as shown in drawing and as specified as directed by Engr-in-Charge Drg No. FD-28/210/248/276.

Dismantling of unserviceable side of table Bed side and S&F with New Side of 1st class teak wood 12mm thick, all joints to be fixed with Bamboo pins, wooden screws where required on completion of repair, the complete item to be french polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of French polish as shown in drawing and as specified as directed by Engr-in-Charge Drg No. FD-28/210/248/276.

Dismantling of unserviceable back of table Bed side and S&F with New back of 6mm thick commercial plywood BWR grade, all joints to be fixed with Bamboo pins, wooden screws where required on completion of repair, the complete item to be french polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of French polish as shown in drawing and as specified as directed by Engr-in-Charge Drg No. FD-28/210/248/276.

Dismantling of unserviceable Shelf of table Bed side and S&F with New Shelf of 1st class teak wood 12mm thick, all joints to be fixed with Bamboo pins, wooden screws where required on completion of repair, the complete item to be french polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of French polish as shown in drawing and as specified as directed by Engr-in-Charge Drg No. FD-28/210/248/276.

TOPS:- Dismantling of existing old unserviceable top of Table dining 6 persons and S&F new top made out of 18mm thick prelaminated particle board duly providing 4mm thick teak wood beading all round the top Note : unit rate quoted shall include polishing of the item Drg No FD-30/239/273

Dismantling of existing old unserviceable top of Table dining 8 persons and S&F new top made out of 18mm thick prelaminated particle board duly providing 6mm thick TW edging all round the top. Note : unit rate quoted shall include polishing of the item Drg No FD-30/239/273

Dismantling of existing old unserviceable top of Table 3'x2' with drawer/ without drawer and S&F new top made out of 18mm thick prelaminated particle board duly providing 6mm thick TW edging all round the top. Note : unit rate quoted shall include polishing of the item Drg No FD-42/223/231/283.

Dismantling of existing old unserviceable top of Table writing and S&F new top made out of 18mm thick prelaminated particle board duly providing 6mm thick TW edging all round the top. Note : unit rate quoted shall include polishing of the item Drg No FD-33/29/275.

Dismantling of existing old unserviceable top of Table 900X900X760MM and S&F new top made out of 18mm thick prelaminated particle board duly providing 6mm thick TW edging all round the top. Note : unit rate quoted shall include polishing of the item Drg No FD-88/291.

Dismantling of existing old unserviceable top of Teapoy and S&F new top made out of 18mm thick prelaminated particle board duly providing 6mm thick TW edging all round the top. Note : unit rate quoted shall include polishing of the item Drg No FD-34/232/278/238.

Dismantling of existing old unserviceable top of Peg Table and S&F new top made out of 18mm thick prelaminated particle board duly providing 6mm thick TW edging all round the top. Note : unit rate quoted shall include polishing of the item Drg No FD-277/334/236.

Dismantling of existing old unserviceable top of Table centre and S&F new top made out of 18mm thick prelaminated particle board duly providing 6mm thick TW edging all round the top. Note : unit rate quoted shall include polishing of the item Drg No FD-274.

S&F with Screws of 1st class Teak wood brackets of size 75x75x25mm for Table dining 6 persons, Table dining 8 persons, Table 3'x2' with/with out drawer, Table writing, Table 3'x3', Table of sorts, Peg table, Table centre and Teapoy all as directed by Enge-in-Charge.

Table Office Clerk Wooden Dismantling of unserviceable leg of table Office Clerk Wooden and S&F with new leg of 1st class teak wood, all joints to be fixed with bamboo pins, wooden screws where required on completion of repair, The complete item to be french polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of french polish as shown in drawing and as specified, as directed by Enge-in-Charge Drg No. DB-4120

Dismantling of unserviceable Side stffiner of table Office Clerk Wooden and S&F with new side stiffner of 1st class teak wood, all joints to be fixed with bamboo pins, wooden screws where required on completion of repair, The complete items to be French polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of french polish as shown in drawing and as specified, as directed by Enge-in-Charge Drg No. DB-4120.

Dismantling of unserviceable Centre stiffner of table Office Clerk Wooden and S&F with new centre stiffner of 1st class teak wood, all joints to be fixed with bamboo pins, wooden screws where required on completion of repair, The complete items to be French polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of french polish as shown in drawing and as specified, as directed by Enge-in-Charge Drg No. DB-4120.

Dismantling of unserviceable Drawer of table Office Clerk Wooden and S&F with new Drawer of 1st class teak wood, all joints to be fixed with bamboo pins, wooden screws where required on completion of repair, The complete items to be French polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of french polish as shown in drawing and as specified, as directed by Enge-in-Charge Drg No. DB-4120.

Table Office Officer Wooden Dismantling of unserviceable Drawer of table Office Officer Wooden and S&F with new Drawer of 1st class teak wood, all joints to be fixed with bamboo pins, wooden screws where required on completion of repair, The complete items to be French polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of french polish as shown in drawing and as specified, as directed by Enge-in-Charge Drg No. DB-4120, F-34.

Dismantling of unserviceable Door shutter of table Office Officer Wooden and S&F with new Door shutter of 1st class teak wood, all joints to be fixed with bamboo pins, wooden screws where required on completion of repair, The complete items to be French polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of french polish as shown in drawing and as specified, as directed by Enge-in-Charge Drg No. DB-4120, F-34.

Removing the unserviceable top from table office officer wooden and S&F table top 18m thick plywood BWR Grade ISI marked, fixing on existing wooden table with adhesive glue and tighten with wooden screws and pasting laminated sheet of 1.00mm thick over ply wood properly fixing with out air bubbles and providing 1/2 curve 1st class teak wood beading 12mm thick and width not less than 50mm beading all around including polishing all as directed by Engr-in-Charge. Drg No-DB-4120, F-34

Table Writing JCO's/Medium Dismantling of unserviceable leg of table writing JCO's /Medium and S&F with new leg of 1st class teak wood, all joints to be fixed with bamboo pins, wooden screws where required on completion of repair, The complete items to be French polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of french polish as shown in drawing and as specified, as directed by Enge-in-Charge Drg No. DB-3982.

Dismantling of unserviceable drawer of table writing JCO's /Med and S&F with new door shutter of 1st class teak wood, all joints to be fixed with bamboo pins, wooden screws where required on completion of repair, The complete item to be French polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of french polish as shown in drawing and as specified, as directed by Enge-in-Charge Drg No. DB-3982.

Dismantling of unserviceable door shutter of table writing JCO's /Med and S&F with new door shutter of 1st class teak wood, all joints to be fixed with bamboo pins, wooden screws where required on completion of repair, The complete item to be French polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of french polish as shown in drawing and as specified, as directed by Enge-in-Charge Drg No. DB-3982.

Removing the unserviceable top from table writing JCOs/Medium wooden and S&F table top 18m thick plywood BWR Grade ISI marked, fixing on existing wooden table with adhesive glue and tighten with wooden screws and pasting laminated sheet of 1.00mm thick over ply wood properly fixing with out air bubbles and providing 1/2 curve 1st class teak wood beading 12mm thick and width not less than 50mm beading all around including polishing all as directed by Engr-in-Charge. Drg No-DB-3982

Table 5' x 2'-10" Dismantling of unserviceable Leg of table 5'x2' - 10" and S&F with new leg of 1st class teak wood, all joints to be fixed with bamboo pins, wooden screws where required on completion of repair, The complete item to be French polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of french polish as shown in drawing and as specified, as directed by Enge-in-Charge Drg No. F-1.

Dismantling of unserviceable side stiffner of table 5'x2' - 10" and S&F with new side stiffner of 1st class teak wood, all joints to be fixed with bamboo pins, wooden screws where required on completion of repair, The complete item to be French polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of french polish as shown in drawing and as specified, as directed by Enge-in-Charge Drg No. F-1.

Dismantling of unserviceable centre stiffner of table 5'x2' - 10" and S&F with new centre stiffner of 1st class teak wood, all joints to be fixed with bamboo pins, wooden screws where required on completion of repair, The complete item to be French polished by scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of french polish as shown in drawing and as specified, as directed by Enge-in-Charge Drg No. F-1.

Removing the unserviceable top from table 5' x 2'-10" wooden and S&F table top 18m thick plywood BWR Grade ISI marked, fixing on existing wooden table with adhesive glue and tighten with wooden screws and pasting laminated sheet of 1.00mm thick over ply wood properly fixing with out air bubbles and providing 1/2 curve 1st class teak wood beading 12mm thick and width not less than 50mm beading all around including polishing all as directed by Engr-in-Charge. Drg No F-1

Hat stand with mirror Removing the existing unserviceable mirror and S&F new mirror 5 mm thick size 450x300mm complete all as specified and shown on drgs Drg No -FD 23/233/238/361/362.

Removing the existing unserviceable pegs and S&F new Chromium plated brass pegs all as specified and shown on drgs Drg No -FD 23/233/238/361/362.

Removing the existing unserviceable beading frame of hat stand with mirror and S&F new 1st class hard wood beading frame including polishing all as specified and shown on drgs Drg No -FD 23/233/238/361/362.

Removing the existing unserviceable 25mm block board of hat stand with mirror and S&F 25mm block board BWR graded and fixed new one side teak face 4mm thick plywood on plywood front side all as specified and shown on drgs Drg No -FD 23/233/238/361/362.

SIDE BOARD Removing the existing unserviceable top of side board and supply & fix with new top made of 18mm thick pre-laminated particle board all as shown in drg. Drg No FD-241

All same as per item No. 101 here-in-before but sides. Note : Each side will be measured as one unit. Drg No FD-241

All same as per item No. 101 here-in-before but shutter and providing aluminum anodized knob and 4mm thick TW edging alround including polishing. Note : Each shutter will be measured as one unit. Drg No FD-241

All same as per item No. 101 here-in-before but bottom. Drg No FD-241

All same as per item No. 101 here-in-before but drawer complete. Drg No FD-241

Removing the existing unserviceable back of side board and supply and fix new back made of 6mm Thick plywood commercial as shown in drg. Drg No FD-241

Removing the existing unserviceable hinges of side board and supply and fix new metal coated black Continuous piano type hinge upto full height of shutter all as specified and shown on drg. Note : Each hinge will be measured as one unit.

Removing the existing unserviceable leg frame of side board with legs and supply & fix with new leg Frame with legs made of 1st class teak wood including polishing all as shown in drgs.

Book Case Dismantling of unserviceable leg of bottom frame of Book case and supply and fix with New leg of bottom frame made of Ist class teak wood, all joints to be fixed with Bamboo pins, wooden Screws where required on completion of repair. The complete item to be French polished by Scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then polish two coats of French polish as shown in drawing and as specified, as directed by Engr-in-Charge Drg No. FD-45/237

Dismantling of unserviceable front rail of bottom frame of Book case and supply and fix with New front rail of bottom frame made of Ist class teak wood, all joints to be fixed with Bamboo pins, wooden Screws where required on completion of repair. The complete item to be French polished by Scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then polish two coats of French polish as shown in drawing and as specified, as directed by Engr-in-Charge Drg No. FD-45/237

Dismantling of unserviceable side rail of bottom frame of Book case and supply and fix with New side rail of bottom frame made of Ist class teak wood, all joints to be fixed with Bamboo pins, wooden Screws where required on completion of repair. The complete item to be French polished by Scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then polish two coats of French polish as shown in drawing and as specified, as directed by Engr-in-Charge Drg No. FD-45/237

Removing the existing unserviceable bottom of book case and supply & fix with new bottom made out of 18mm thick Ist class teak wood bottom for book case all as specified and shown on drawing as directed by Engineer-in-Charge. Drg No. FD-45/237

Dismantling of unserviceable door shutter of book case and S&F new Door Shutter made out of 18mm Pre-laminated particle Board Exterior Grade fixed with piano Hinges with wooden screws and providing 4 mm thick Ist class Teak wood beading all around the shutters and fixing 100mm Almuminium handle 01 for for each shutter & fixing of aluminium Harps and Staples as directed by Engineer –in- Charge. Drg No FD-45/237

Removing of unserviceable top of book case and S&F new top made with prelaminated particle Board 18mm thick by providing front 6mm beading all as per drawing and directed by Engineer –in-charge. Drg No. FD-45/237

Removing of unserviceable shelves of book case an S&F new shelf made with prelaminated particle Board 18mm thick by providing front 6mm Ist class Teak wood beading in front of shelves as directed by Engineer –in- Charge, as per drawing. Drg No. FD-45/237

Removing the existing unserviceable sides of book case and supply & fix new side made of 18mm thick pre-laminated particle board. Note : Each side will be measured as one unit. Note : Unit rate quoted for all the above items shall be deemed to include for connected Minor repairs wherever necessary and polishing of repaired Book case. Drg No. FD-45/237

Removing of unserviceable back sheet plywood of book case S&F the New 6mm plywood BWR grade to be fixed with screws as per drawing. Drg No. FD-45/237

Almirah Mess utencil Dismantling of unserviceable leg of bottom frame of Almirah Mess utencil and supply and fix with New leg of bottom frame made of Ist class teak wood, all joints to be fixed with Bamboo pins, wooden Screws where required on completion of repair. The complete item to be French polished by Scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of French polish as shown in drawing and as specified, as directed by Engr-in-Charge Drg No. FD-45/237

Dismantling of unserviceable front rail of bottom frame of Almirah Mess utencil and supply and fix with New front rail of bottom frame made of Ist class teak wood, all joints to be fixed with Bamboo pins, wooden Screws where required on completion of repair. The complete item to be French polished by Scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of French polish as shown in drawing and as specified, as directed by Engr-in-Charge Drg No. FD-45/237

Dismantling of unserviceable side rail of bottom frame of Almirah Mess utencil and supply and fix with New side rail of bottom frame made of Ist class teak wood, all joints to be fixed with Bamboo pins, wooden Screws where required on completion of repair. The complete item to be French polished by Scrapping the old polish, after filling the cracks, joints and uneven surfaces with wax and then applying two coats of French polish as shown in drawing and as specified, as directed by Engr-in-Charge Drg No. FD-45/237

Removing the existing unserviceable bottom of Almirah mess utencil and supply & fix with new bottom made out of 18mm thick Ist class teak wood for Almirah mess utencil all as specified and shown on drawing as directed by Engineer-in-Charge. Drg No. FD-45/237

Removing the existing unserviceable sides of Almirah mess utencil and supply & fix new side made of 18mm thick Ist class teak wood for Almirah mess utencil Note 1 : Each side will be measured as one unit. Note 2 : Unit rate quoted for all the above items shall be deemed to include for connected Minor repairs wherever necessary and polishing of repaired Almirah mess utencil. Drg No. FD-45/237

Dismantling of unserviceable Door Shutter of Almirah mess utencil and S&F new door shutter made out of 18mm Pre-laminated particle Board Exterior Grade fixed with piano Hinges with wooden screws and providing Ist class Teak wood beading all around the shutters, and fixing 100mm Almuminium handle 01 for for each shutter & fixing of aluminium Hasps and Staples as directed by Engineer –in- Charge.

Removing of unserviceable back side plywood of Almirah mess utencil and supply & fix New 6mm plywood BWR grade fixed with screws as per drawing.

Removing of unsv top of Almirah mess utencil and S&F new top made with 1st class hard wood planks19mm thick all as per drawing and directed by Engineer –in-charge.

Removing the unserviceable shelves of Almirah mess utencial and S&F new shelf made out of 18mm thick Ist class teak wood as directed by Engineer –in- Charge. as per drawing.

Venkat Sai Enterprises

SN POWER TECH

sandhya enterprises

PAVAN ENTERPRISES

Sri Surya Enterprises

ramesh construction co

K APPAJI KUMAR AND CONSTRUCTIONS