WBPWD/SSEWEC/HED /NIQ-26/2025-26

Make:- OTIS/KONE/SCHINDLER

Type : Passenger MR Lift

Load : 13 Passenger /884 Kg.

Control: Microprocessor based with AC Variable Voltage & Variable frequency (VVVF)

Machine: Energy Efficient Machine ;Geared/ Gearless, with Machine Room.

Speed : 1.0 Mtr. /Sec.

Floor Served : G + 2

Landing : 3 (Three) lands ; All on same sides

Total Rise : 14 Mtr. (Approx) [Bidder should follow the CGA drawing/ Visit the site, as applicable]

Operation : Microprocessor based Duplex full collective with or without attenedent.

Signals : Digital Car postion indicator, car travels direction indicator in car and at all landing with call registration indicator. COP & LOP must have stainless steel face plate silver brushed with surface mounted button with braille. Button : All buttons on car & landing shall be luminous & encoded with braille on/off switch for Lift, fan, light, toggle switch or key switch for automatic/attendent mode of operation, with required Braille Button facility. Display type : Monochrome/ Colour LCD / Segmented LCD/ Scroll. Operation Push Buttom for lift maintenance & service should be on top of the car.

Travelling Accuracy: ± 5mm (Micro Levelling Arrangement)

Car Inside : 1300 mm (W) X 1350mm (D) × 2200 mm (H)

Car Entrance : Clear Opening 1200 mm (W) X 2000 mm (H) protected with car door.

Car Encloser: Stainless Steel Sheet (20SWG) with hair line finish with Three Side hand rail.

Car Ceiling & Lighting : Stainless Steel with hair line finish with LED Lighting & Fan, incl. rear mid panel with mirror finish.

Car Ventilation : Axial fan with anodised aluminium / SS grill.

Car Flooring : Decorative Granite Flooring (As per direction of EIC and according to departmental order.)

Car Door : Stainless Steel Centre Opening (COPD) / Telescopic Opening (TSPD) automatic door provided with V3F controlled door drive system.

Landing Door: Stainless Steel Centre Opening (COPD) / Telescopic Opening (TSPD) automatic door provided with V3F controlled door drive system with fire rating of 120 min.

Door Opening: Automatic Power operated door with full length photocell assembly curtain sensor.

PROTECTIVE DEVICES & OTHER ACCESSORIES :-

ARD: Automatic rescue device complete with dry maintenance free batteries as required for automatic evacuation to the nearest floor in case of power failure / single phasing/others.

Overload Protection:Fully loaded with overload protection. On overloading condition the lift car will not start with door remaining open and give audio & display indication.

Emergency Lighting In Car: Battery operated emergency lighting in the lift car.

Intercom System: Battery operated Intercom System in Lift Car, Machine Room & Control Room.

Emergency Alarm: Battery Operated alarm bell system in Lift Car & Control Room.

Fireman switch : Fireman switch placed at ground floor.

Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the lift.

Car Parking at top floor at idle condition.

Main Wire Rope/ Belt : As per manufacturer's standard conforming to IS.

Auto fan Cut-Off

DIMENSION OF SHAFT & POWER SUPPLY :-

Available Shaft Dimension: 1900 mm (W) X 2600 mm (D)

Pit Depth: 1900mm ( Bidder should visit the site)

Overhead: 4500mm ( Bidder should visit the site)

Electric power supply: AC 415V, 3Phase, 50Hz terminated in machine room as per IS.

External Monitoring system through MOD BUS RS485.

MINOR MASONARY WORK :-

If the gap between the door frame and wall structure is up to ± 50 mm then the cost should include the required minor masonary works needed to plug the gap , if necessary, as per direction of EIC.