REPAIR TO FLOORING, PLINTH PROTECTION, PATH ETC IN AREA OF AGE B/R-II UNDER GE (WEST) JABALPUR

Amount

Taking down cement plaster / terrazzo of any description thickness including raking out joints hacking for key scrubbing down with water complete all as specified and as directed.

M&L for 10mm thick rendering in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without ung extra cement complete all specified and directed.

M&L rendering on concrete/brick surfaces 15mm thick in CM 1:4 ung with water proofing compound as per manufactures instruction finished even and smooth without ung extra cement complete all as specified and as directed. ( Note: WPC measured and paid saperately)

M&L 5mm thick rendering in Cement Mortar 1:3 on Concrete Surfaces, ceiling etc finished surface Even and Smooth, without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered surfacces and applying three coat of white wash as in ceilling complete all as specified and as directed.

M&L for Preparing Newly Plastered Surfaces of internal wall and applying two Coats of oil emulon distemper over 1 mm thick wall care putty with one coat of primer on wall plastered surface complete all as specified and as directed.

M&L for Preparing Surfaces of external Walls and applying one Coats of Cement Base Paint complete all as as specified and as directed.

M&L for Prepration of old surfaces of ceiling includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of white wash on ceiling surface complete all as specified and directed.

M&L for complete removal of existing treatment & washing rubbing down and stopping of distempered and painted surfaces incl preparation of old undecorated surface of walls and Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior/interior primer applied @ 0.90 litre/ 10 sqm over old/ new surfaces over 1 mm thick wall care water proof putty on wall over priming surafce complete all as specified and directed.

M&L for Prepration of old surfaces of walls includinng COMPLETE REMOVAL OF EXSISTING TREATMENT scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying Two coat of oil bound distemper on wall over a coat of primer ver 1 mm thick wall care water proof putty on wall (white or tinted) complete all as specified and directed.

Supply only liquid Water proofing compound complete all as as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down and applying cement slurry with 3 kg/sqm with water to remove dust, completed all as specified and directed.

Demolition of cement concrete in ground floor and paving not exc 15cm thickness (below or above ground level) complete all as specified and as directed.

Dismantaling floor hearth or wall tiling/china moisac, paver block , cheakered tile , including cement mortar bedding (but not backing ) , removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L 100 mm thick PCC 1:4:8 type D2 (ung 40mm graded stone aggregate) as in sub base complete all as specified and directed

M&L for 25 mm thick cement concret Type B1 1:2:4 (Ung 20mm graded aggregate ) complete all as specified and as directed.

M&L vItrified ceremic tiles 10 mm thick, in light /dark (Square/rectangular) polished, area of Each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set & jointed in neat cement slurry and and pointed in water proof epoxy with pigment to match, laid over and including screed bed of CM 1:4 15 mm thick all as specified and directed complete all as specfied and directed by engineer in charge.

M&L for Vitriefied ceramic tiles 10mm thick light(square/rectangular) polished area of Each tiles not exceeding 0.36 Sqm as in vertical surfaces such as dados/skirting etc set and jointed in neat cement slury and in coloured cement to match Coloured on incl plaster (backing coat) 1:4 CM 10mm thick complete all as specified and as directed.

M&L Non skid coloured ceramic tiles of any shade 7 to 8mm thick square/ rectangular area of Each tile exceeding 0.18 Sqm but not exceeding 1 Sqm as in floor etc set and jointed in neat cement slurry and and and pointed in water proof epoxy with pigment to match, laid over and including screed bed of CM 1:4 15 mm thick complete all as specfied and directed by engineer in charge.

M&L for glazed ceramic coloured tiles ex 0.18 sqm not exceeding 0.42sqm and 6 to 7mm thick on vertical surface such as wall tile etc. ,set and jointed in neat cement slurry and jointed in neat cement slury and in coloured cement to match Coloured on incl plaster (backing coat) 1:4 CM 10mm thick complete all as specfied and directed by engineer in charge.

M&L Non skid coloured ceramic tiles 7 to 8mm thick square/ rectangular area of Each tile exceeding 0.11 Sqm but not exceeding 1 Sqm as in skirting etc set and jointed in neat cement slurry and pointed in white cement with pigment to match, laid over and including incl plaster (backing coat) 1:4 CM 10 mm thick all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of Each tile exc 0.11 Sqm but not exceeding 1 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed..

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of Each tile exc 0.11 Sqm but not exceeding 1 Sqm, as in skirting ,dados in vertical surfaces etc and including 10mm thick cement plaster 1:4 complete all as specified and directed.

Material and labour 20-25 mm thick machine cut kota stone flooring laid and jointed with neat cement slurry mixed with pigment to match the shade of the slab laid over including screed bed of CM 1:4 15 mm thick complete all as specfied and directed by engineer in charge.

M&L 18 to 20 mm thick machine cut kota stone as in vertical surfaces risers of steps , skirting, dado and pillars etc set and jointed in neat cement slurry and pointed with grey cement mixed with pigment to match the colour of stone slab laid over and including 10 mm thick rendering in cement mortar 1:4 including rubbing and mirror polishing complete all as specified.

M&L for Granite (of any type ) 20 mm thick work (table rubbed and polished ) in steps ,jambs,pilllars,window cill,cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2)ung marble dust with admixture of pigment to match with shade of Granite laid over 20mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C2 ung 20mm graded aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with complete all as specified and as directed.

Demolition of brick work as in walls/parapet wall,s removing grass fungus weed, roots of trees completely, grown on roof/wall surfaces complete all as specified and as directed. .

M&L for Brick work with sub class ‘B’ brick, straight or curved as plan exc 6m mean radiusbuilt in cement mortar 1:6 complete complete all as specified and as directed. .

M&L for Brick work with sub class ‘B’ brick, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.

Taking down chowkhats or frame (with shutter w/o taking off shutter from the frame) area exc 1.5 Sqm but nexc 4 Sqm Each .

Taking down Shutters of any description n.exc 1 Sqm Each complete all as specified and as directed.

Taking down Shutters of any description exc 1 Sqm but n exc 2.0 Sqm Each complete all as specified and as directed.

Refixing of shutters including taking down easening and adjusting and also refixing hardware as required including cutting at base , renewal of unserviceable screws etc. of any description n exc 1.0 Sqm Each, in same opening all as specified and as directed.

S &F Anodised aluminium window and ventilator shutters including frames , top hung type type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F PVC door frame of size 50mm x 47mm made out of 5 mm plain coloured PVC sheet reinf with MS square tube supplying & fixing in opening as per specification complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consting of frame made out of MS tubes for top and bottom rails . M,S frame shall be covered with heat moulded plain colour PVC ,C, channel having a PVC sheet strip of 20mm width stuck inde with solvent cement for stiles and plain colour PVC sheets for top rails , lock rails and bottom rails on either de and as gap insert for top rail and bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S frame welded /sealed to the stiles & rails with suitable PVC sheet beading , and jointed together with solvent cement , supplying and fing in the frame as per specification and drawing.

M & L for Factory Made Solid PVC Moulded Door Shutter with particle board core , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

S&F, in repair aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed

S&F, in repair aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed

S&F, aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300 mm and fixed complete all as specified and directed.

S&F, 75 mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin,TypeB21 complete all as specified and directed.

S&F in repair extruded aluminium alloy handles, fabricated type, anodised of ze 150 mm complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised of ze 125 mm complete all as specified and directed.

S&F in repair 150mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel springcomplete all as specified and directed.

S&F in repair 300mm long mild steel ordinary rat tail rod pattern springs,including roller and roller plate complete all as specified and directed.

S&F in repair 125mm hasp and staples,aluminium anodized including bolt to hinges plate and fixed with screws complete all as specified and directed

S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified.

S&F in repair stainless steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified.

Hacking out old broken glass (any thickness, ze, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new one complete all as specified

S&F 3mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in Each pane complete all as specified

S&F 4mm thick figured glass, pinn headed type and glazing with oil putty in square n. exc 0.5 Sqm Each panes complete all as specified

S&F 5.5 mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in Each pane complete all as specified

S&F, in repair, double action floor door closer, hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, suitable for aluminium doors and fixed complete all as specified and directed.

S&F in repair door closer hydraulically regulated degnation No.2 universal type of aluminium body fixed to door frames with screws or by welding complete for door shutters of 850 to 1000mm in width all as specified and directed by Engrincharge.

M&L for Preparation of old wooden surface of any description over 10 cm width or grith and applying one coats of synthetic enamel paint com all as specified.

M&L 80 mm thick machine pressed precast concrete interlocking paver block and shape and size confirming to IS 15658-2006 of M-35 Grade with 50 mm thick sand cusion grey cement and pigment complete all as specified and directed.

M &L 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base, sub floor of flooring, paving, path etc surfaces finished even and fair to receive top layer complete all as specified and directed.

M&L for Chequered cement concre tiles 20 cm x20 cm x25 mm thick, set, jointed and pointed with grey cement and pigment to match over 20 mm thick cement screed bed in 1:4 CM complete all as specified and directed

Taking down old steel tubing & connection including cleaning for refixing or removal from site for 15mm bore pipe complete all as specified

Taking down old steel tubing & connection including cleaning for refixing or removal from site for 20 mm bore pipe complete all as specified

supply and laying of CPVC pipe 16 mm outer dia SDR 11 & plain cpvc SDR11 fitting on wall and celling or laying in floor completed all as specified and directed

supply and laying of CPVC pipe 20 mm outer dia SDR 11 & plain cpvc SDR11 fitting on wall and celling or laying in floor completed all as specified and directed

S & F in repair Brass CP mixer sink cock of fancy type with swan neck of 15 mm bore for mixing hot & cold water screwed down for iron pipe and fixed of approved make by engineer in charge

S & F in repair Brass CP wall mixer with provision for overhead shower with bendpipe for shower on upper side of fancy type of 15 mm bore for mixing hot & cold water screwed down for iron pipe and fixed of approved make by engineer in charge

S & F in repair providing and fixing 15 mm cp brass two way bib cock with cHealth faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified screwed down for iron pipe and fixed of approved make by engineer in charge .

M & L for cHealth faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete

S & F in repair Pillar taps fancy type 15 mm bore , cast copper alloy, with capstan heads, chromium plated, screwed down highpressure, with orwithout lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed completed all as specified and directed.

S & F in repair Pillar taps fancy type 15 mm bore LONG BODY , cast copper alloy, with capstan heads, chromium plated, screwed down highpressure, with orwithout lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed completed all as specified and directed.

S & F in repair 15 mm bore Stop valves fancy type chromium plated with long shank and cup (concealed type) , castcopper alloy,screwed down,high pressure,with crutch orbutterfly handle,screwed bothends for ironpipe or for unions and fixed

S & F in repair for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement completed all as specified and directed.

Providing and fixing CP brass overhead shower dia 105mm dia and with 15mm cp brass shower arm 190 mm long flat shape for wall mounted shower with flange completed all as specified and directed.

Taking down of eve gutter rain water pipe of any size including all fitting etc completed all as specified and directed

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed in floor/wall 110mm bore

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed in floor/wall 75mm bore

S&F in repairs PVC (SWR) bends any radius with acsess door of 110 mm bore

S&F in repairs PVC (SWR) bends any radius with acsess door of 75 mm bore

pvc swr 110 mm bore T equal or unequal completed all as specified and directed

Cutting grooves in brick wall,75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 all as specified and directed.

M/L PVC(SWR) junction single Tee with acssess door equal or unequal of 110mm dia with etc complete all as specified and directed

M/L PVC(SWR) junction single Tee with acssess door equal or unequal of 75 mm dia with etc complete all as specified and directed

S & F PVC (SWR ) brach piece 110 mm bore single ( single Y)equal or unequal

M&L for 75mm diaPTMT multi floor trap plain with grating including jointing with solvent cement complete all as specified 7and directed.

M & L in repair for 32 mm bore low density polyethelene pipe ldpe with fitting of pressure rating 6 kgf /sqcm fixed to wall or in floor completed all as specified and directed .

S & F in repair curtain rod 20 mm dia stainless steel with brackets and end globes (size 18 x 3 mm -L shape ) stops, rollers etc. and fixed in position complete.

S & F in repair providing and fixing 15 mm cp braas bib cock with wall flanges complted as per specified and directed

S&F in repair 20mm dia gun metal,globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed

S &f galvanised steel tubing medium grades 25 mm bore completed all as specified and directed

S & f in repair grating doom 100 mm dia of chromium plated fixed complted

S&F Single Towel Rail 600mm Long, Stainless steel fixed to walls with chromium plated (CP) brass screws Make Essco by Jaquar (AEC-1111) or equivalent.

S & F PVC connections 15 mm size with PTMT nuts of length 600 mm

S & F PVC connections 15 mm size with PTMT nuts of length 450 mm

S&F in repair vitreous China squatting pan of pattern Orissa Pan , size 580 x440 mm white with integral foot rests any pattertn (excl flushing cistern and flush pipe) complete incl provn of lime concrete bedding connection to flush pipe , trap etc & making good.

S& F in repairs Vitreous China wash hand basin, white, flat back, size 550mm x 400mm including exsisting bracket fixing flat back or angle back type with pvc hdpe pipe 32 mm dia waste pipe , brass coupling, mild steel brackets fixed to wall, with pedestal complete all as specified and directed.

S&F in repairs 10 ltr PVC valve less symphonic action type flushing cistern, low level white with inlet ball valve float and handle with flush pipe complete all as spfd

S & F in repair Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automaticflushing cistern with brackets,flush pipe, grating and Union for discharge pipe. includive of fixing supply pipe to flushing cistern, trap and waste pipe) &Urinal spreader of cp for fixing with 15 mm dia pipe completed all as specified and directed.

S & F door seal rubber completed all as specified and directed

S & F pvc cabinet with mirror completed all as specified and directed

Supply & providing water proofing treatment with polymeric standard water proofing membrane, Aquaflex manufactured by M/s Bengal Bitumen, MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd/ Hyperplas manufactured by IWL Ltd having 10 years gurantee for water tightness complete all as specified and described as under:- (a) Preparation of sunken surfaceproviding 10 mm thick rendering in cement mortar 1:4 mixed with WPC @ 2 % by weight of cement and applying one coat of polymeric modified bitumen 85/25 @ 1.2Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/sqm including cleaning surface all as per manufaturer's specification complete all as specified and directed. (b) Supply & providing water proofing with polymeric proofing membran of 3Kg/Sqm HYPERPLAS STANDARD/ MULTIPLAS STANDARD consisting of 100micron HMHDPE film centre core including coating the surface with compatible primer and torch application of membrane with 10cm overlaps as required thereof, complete all as specified and directed (c) GI pipe 40m bore light grade shall be embedded as outlet at the lowest portion for slope on the wall extending upto at least 450 mm beyond the outer wall

M&L for Preparing Surfaces of external Walls and applying Two Coats of elastomeric coating waterproofing paint after cleaning the damp surface surfce thoroly and sealing all cracks with acrylic sealing compound as per manufacture instruction complete all as as specified and as directed.

M & L for tile joint grouting and chemical cleaning carefully washing the exsisting tile prefebly carefully washing the exsisting tile with heavy duty tile cleaner prefebly of m/s bal endura , m/s pidilite or eqvivalent cleaning white / matching colour with curing clearing and handling over all complete as directed by engineer in charge .

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

M&L Pre-painted galvatume aluminium zinc coating GI based corrugatged steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified

S&F in repair rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to a common rafters, fixed with angle cleats or other connecting plates of Gde fe 410-0 or fe 250-0

Dismantling structural steel work including doors, gates but excluding framed truss etc completed all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in and position completed all as specified and directed.

S&F, Aluminium anodised sections powder coated with any colour for doors/windows/ventilators/ patrion with one or more rebates including joining cleat for fixing to wall or floor etc complete with frames, shutters and grills of size directed by Engineer-in-charge including handles, tower bolts, grills, etc complete all as specified and directed. Note:- Floor door spring, sheet glass, wire cloth, lock, etc shall be measured and paid seperately.

M & L for 4 mm fluted coloured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane completed all as specified and directd .

Providing and fixing white vitreous china Couple Water closet Make of Jaquar cat no. CNS-WHT-755S220SPP and CNS-WHT-207 or Kohler cat no. K-8753T and K-8753T-S or Grohe cat No. 39 119 001 with PP soft closing seat cover, Hinges, fixing Accessories set, Connection pipe with painting complete including cutting and making good the walls where required complete as directed by Engineer-in-Charge (Contractor Shall Provide 10 year Warrantee certificate and Manufacturer's Test Certificate including copy of invoice of each item).

S & F in repair Toughned glass 10 mm as in hinged doors, partitions automatic doors nd similar work including cutting to shape, drilling holes required.

S&F in repair 18 mm thick ply , PVC sheet Prelaminated on one side with approved texture ("Celuca ply of Rajshree make or equivalent in "sintex" having density 600 , as approved by GE) as in kitchen cabinet ( with shelves and partition ) including necessary fittings & fixtures as per manufacture's instrucions complete all as specified and directed

S & F in reapir 32 mm Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed completed all as specified and directed .

S & F in reapir 40 mm Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed completed all as specified and directed .

S&F aluminium powder coated louvered ventilators of section size 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. making good the jambs and painting with existing surface matching,including taking down old ventilator complete all as specified and directed by Engr-in-Charge

Mahakal Construction Company (BID ID -3432138)

DEEPAK CONSTRUCTION (BID ID -3434500)

chandra builders (BID ID -3434073)