PROVN OF TOILET IN BLDG NO T-7, PROVN OF HARD STANDING FOR OR LIVING ACCN IN 261 CEDU, PROVN OF MOSQUITO PROOFING IN VERANDAH, AREA IN BLDG NO T-1 T-2, PROVN OF FRESH WATER PIPE LINE AT OR TOLIET T-11, PROVN OF LED WITH POLE FOR B- BLOCK CHILDREN

Amount

SCHEDULE 'A' PART-I

Excavation in trenches n.exc 1.50 m wide and n.exc 1.50 m deep for foundation or for shafts, wells cesspits,man holes etc n exc 10sqm on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and directed.

Removing excavated soil n. exc. 50m and depositing where directed at a level n. exc. 1.5 m above the starting point etc complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge or any thickness in roof covering complete all as specified and directed.

S&F 0.63mm thick galvanised corrugated mild steel sheeting with two corrugation side lap, fixed with 'L' type or 'J' type or cranked hook bolts, in roofs, walls etc with grade of zinc coating 120 gm/sqm complete all as specified and directed

Fixing only Corrugated galvanized steel sheeting any thickness with two corrugation side laps and fixed with new L type or J type hooks or cranked hook bolts and washers in roof/wall complete all as specified and directed.

S&F 0.63mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 etc complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed

Taking down roof trusses, coupling rafters of clear span above 4m & upto 8 m but including taking down trusses etc., for renewal of any defective members (timber renewed to be measured separately) and reassembling etc complete all as specified and directed.

Housing and fixing trusses etc. after repairs including tightening up wedges, cotters bolts etccomplete all as specified and directed.

S & F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 290, Gde-E-165 completed all as specified and directed.

S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1998 grade St.-240 complete all as specified and directed.

S&F Mild Steel work in roof trusses (framed), trussed, purlins, crane gantries, rails , for suspending false ceiling or any other work not described and fastenings and heavy brackets framing (beam, tee angle, channel or flat sections or tubelar pipe) including necessary welding, distances pieces, cleats etc confirming to grade Fe-410-W (Gde E 250) for fixing complete all as specified and directed.

S&F Mild steel of conforming to Fe 290 grade E-165 as in wind ties fixed at eaves and ridge level etc complete all as specified and directed.

Demolition of brick or stone masonry work built in cement mortar as in wall including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

All as per item no 17 above but except bricks

Taking down plaster of any description in cement mortar from brick/concrete surfaces including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick/concrete surfces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick/concrete surfces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:4, in two layers, under coat of 10 mm thick & top of 5 mm thick, to fair faces of brick or concrete wall surfaces, top layer 5 mm thick mixed with water proofing compound (@ 3% by weight of cement or as per manufacture's instructions, finished even and smooth without using extra cement complete all as specifed and directed by Engineer-in-Charge. Note : Water proofing compound shall be measured and paid separately as "Supply only.

M & L for rendering 5mm thick in cement mortar 1:3 on fair faces of concrete surfces as in ceiling, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:3 Mixed with water proofing compound 3% on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. Note:- WPC supply only shall be measured and paid for separately.

Supply only integral water proofing compound

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of primer including applying Birla white /JKWhite cement putty complete all as specified and directed

M&L for complete removal of old treated surfaces on walls and applying two coats of oil bound distemper over a coat of primer including applying Birla white /JKWhite cement putty complete all as specified and directed

M&L for preparation of newly plastered surface of walls and applying two coat of cement base paint over one coat of primer complete all as specified and as directed.

M&L for complete removal of old treated surfaces on walls and applying two coats of cement base paint over one coat of primer complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and as directed.

Demolition of plain cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level complete all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description or in any position not otherwise specially provided for complete all as specified and as directed.

M&L for hardcore of broken stone or boulders of gauge n. exc. 63mm, deposited, spread and levelled in layers n. exc. 15 cm thick, watered and rammed to a true surface etc. complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) in foundation filling and mass concrete etc. complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete etc. complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 30 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed

M&L for 100mm thick plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base, floor etc. complete all as specified and directed.

M&L for 25 mm thick plain cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in flooring complete all as specified and as directed.

M&L for 40mm thick plain cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in floors finished even and fair without using extra cement complete all as specified and directed.

M&L for cement concrete in floor 1:2:4 type B1 using 20mm graded aggregate for cement concrete in roof kerbs or mud stops, rounded or chamfered complete all as specified and directed.

M&L for plain cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) as in coping, cills, pole coping, fixing of post, water trough etc. including for use of necessary formwork (straight or curved) complete all as specified and as directed.

M&L for plain cement concrete 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in hold fast block or back filling of frame complete all as specified and directed.

M&L for RCC A1, 1:1.5:3 (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc. complete all as specified and directed.

M&L for RCC, A1 1:1.5:3 (using 20mm graded stone aggregate) as in beams, seimic bands, cantilevers, bressumers and lintels over 1.5m span complete all as specified and directed.

M&L for RCC A1, 1:1.5:3 (using 20mm graded stone aggregate) as in columns, pillar, piers, posts and struts etc. complete all as specified and directed.

M&L for RCC type A1 1:1.5:3 (using 20mm graded stone aggregate) as in Slabs supported on walls,sunshade, chajja, floors, roofs, landings, balconies, canopies, deck slabs etc. complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required including cutting, cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed

M&L for mild steel TMT bars 8 mm dia cut to length, bent to shape as required including cranking, bending and binding with mild steel wire(annealed) not less than 0.9mm dia as in reinforcement bar complete all as specified and as directed.

M&L for mild steel TMT bars 5mm dia and over upto and including 10mm dia cut to length, bent to shape required including cutting, cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia as in stirrups, spacers and binders complete all as specified and directed.

M & L for cutting chases in brick wall for concealed pipe where required and pointing in cement mortar 1:3 etc. complete all as specified and directed.

Use and waste formwork to sides of concrete foundations, footing, bases of colums, plinth beams rough finished surfaces and similar work complete all as specified and directed.

Use and waste formwork to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surfaces of concrete complete all as specified and directed.

Use and waste formwork to sides and soffits of floor or roof beams, beams haunchings, girders, bressumers, lintels, cantilevers, shelves including supports overhangs etc also splays between floors and beams etc. in rough finished flat surfaces of concrete complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings, ramp and similar work n exc 200mm thick (horizontal or sloping) complete all as specified and directed..

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing complete all as specified and directed.

M&L for coloured Non-skid ceramic tiles 8mm to 10mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layers in cement mortar (1:6) complete all as specified and as directed.

All as per item No. 58 above but in vertical surfaces such as skirting and dado, laid over and including 10 mm thick rendering in CM 1:4 complete all as specified and as directed.

M&L for coloured Non-skid ceramic tiles 7mm to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layers in cement mortar (1:6) and complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size 300mmx200mmx7mm/ 300 mm x 450mmx 7mm /250mmx375mmx7mm thick fixed in verticle surfaces, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in CM 1:4 complete all as speciified and drected.

S&F in repairs for pre polished chequered cement concrete tiles area exc .06 Sqm but not exc 0.11 Sqm, 25 mm thick with white cement and pigments of approved make jointed with cement slurry and pointed with white cement mixed with colour pigment to match with the tiles over and including screed bed of 15 mm thick cement mortar (1:6) for laying floor finishes complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 20 mm thick screed in cement mortar (1:4) complete all as specified and directed.

All as per item No. 64 above but in vertical surfaces such as skirting and dado, laid over and including 10 mm thick rendering in CM 1:4 complete all as specified and as directed.

Dismantling of unframed timber scantling 40Sqcm and over in section in any position complete all as specified and directed.

Dismantling unframed timber scantling under 40Sqcm in section in any position complete all as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs of any thickness including cover fillets complete all as directed.

M&L for second class hard wood, in scantlings, clean sawn timber unframed work complete all as specified and directed.

S&F in repairs 20mm thick 2nd class hard wood boarding clean sawn, planed one side with butt joints and fixed with nails in any situation as in eaves board, etc. complete as specified and directed.

S&F, in position suspended false ceiling using E-Grid (exposed ceiling suspension system) of grid size 600mmx600mm with main runer 38x24mm, cross tee 27mmx24mm& wall angle 20mmx24mm. Using 4mm/6mm thick High pressure Steam cured Everest Non Asbestos Fibre cement Designer Board (E Board Classic) of M/S Everest Industries Ltd as per IS 14862 of M/S Everest Industires Ltd to be placed in a grid of GI system duly suspended with 4mm/6mm dia GI/MS bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip provided positions for light fixtures, air conditioning diffuser and ducts, sprinklers, smoke detectors etc. The main runners to be secured to structural soffit by hanger @ 1220mm maximum c/c. The last hanger at the end of each main runner should not be placed at more than 450mm from the adjacent wall, Flush fitting 1220mm cross tee to be interlocked between main runners @ 610mm c/c, so as to form 600mmx600mm/1200mmx600mm grid, all complete as per the drawing & directions of Engineer-in-charge.

Taking down chowkats with shutters including builders hardware(without taking off shutters from the frame) n.exc. 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each including shutter with builders hardware (without taking off shutters from the frame) complete all as specified and as directed.

M&L for 1.25mm thick mild steel pressed steel frames of size 105x60mm for doors with single rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

M&L for 1.25mm thick mild steel pressed steel frames of size 125x60mm for doors with single rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S & F 30 mm thick flush shutter, solid core construction with particle board core and plywood face panel, commercial type on both side complete all as specified and directed.

S & F 35 mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (with out sash bar), edges of framing with plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (a) complete all as specified and directed.

S&F 12mm Prelaminated particle board, exterior grade, prelaminated on both side with decorative choice lamination , fixed with screws or with aluminium beading to aluminium frame or aluminium door shutter/partations wall etc complete all as specified and as directed.

M&L for preparation of old steel surface over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F for PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F for Factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specfication, drawing and complete all as specified and as directed.

S&F MS Butt hinges 100 mm size, cold rolled medium weight complete all as specified and as directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 100mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm size extruded aluminium handles fabricated type, anodised and polished etc. complete all as specified and directed.

S&F 100mm size extruded aluminium handles fabricated type, anodised and polished etc. complete all as specified and directed.

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F helical door spring 300 mm ordinary rat rail rod pattern springs including roller plate complete all as specified and directed.

S&F aluminium body door closer hydraulically regulated designated No.2 universal type suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60kgs and fixed complete all as specified and directed.

S&F in repair Brass locking arrangement with two levers of aproved make mortice lock for fixing to wooden/aluminum shutters complete all as specified and directed.

S & F stain-less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or aluminum wire staples complete all as specified and directed.

S & F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S & F 3 mm thick frosted sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.50sqm in each pane complete all as specified and directed.

S&F steel windows and ventilator fixed type complete with glazing bars dovetailed of welded ready for wire mesh/ and glass pan fixingcomplete all as specified and directed.

S&F steel windows with side hung shutters both mosquito proof and glazed shutter including projecting type hinges with steel handle and steel peg stay with glazing bars and 12 mm square bar or ground bar of approved design welded to steel window frame dovetailed or welded complete all as specified and directed.

S&F steel ventilator with top hung shutter both mosquito proof and glazed shutter including projecting type hinge with steel handle and steel peg stay complete with glazing bars and 12 mm square bar or ground bar of approved design welded to steel ventilator frame dovetailed or welded complete all as specified and directed.

S&F anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M&L for preparaion of both old and new CGI/PGI sheet over 10cm width and applying two coat of anti corrosive roof paint (solvent based) over a coat of chrome primer complete all as specified and directed.

M&L for preparation of new steel surface over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

All as per item no 99 above but not exc 10cm width or girth

S&F in repairs powder coated aluminium alloy curtain rails 20mm dia fixed to required lengths etc. complete all as specified and directed.

S&F in repairs brass chromium plated curtain rails brackets fancy type for 20mm dia curtain rails etc. complete all as specified and directed.

S&F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F Bib taps 15mm bore cast copper alloy, with crutch or butter fly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed.

S&F 15mm dia of stop valves cast copper alloy screwed down high presure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed

S&F 20mm dia of stop valves cast copper alloy screwed down high presure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed

S&F tubular towel rail of 20mm dia and 60cm in length, D shaped, with brass chromium plated brackets complete all as specified and directed.

S&F glass shelf assembly consisiting of 5.5mmthick sheet galss shelf 12cm wide with chromium plated bracket gurad and railing 60cm long complete all as specified and directed.

S & F 500 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and directed.

S&F vitreous china wash hand basin, white flat back size 550 mm x 400 mm including brackets, pillar tap 15mm bore chromium plated cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe complete all as specified and as directed.

S&F vitreous china wash down water closet (padestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for padestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed

S&F 10 Litres capacity PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including brackets etc complete all as specified and directed.

S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe ) and but including 32mm bore dia of discharge pipe Waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms, waste pipe, including PTMT urinal spreader fixed with 15mm dia pipe complete all as specified and directed.

S&F in repair 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed

S&F 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

S&F 110mm dia PVC (SWR) bends of any radius complete all as specified and as directed.

M&L for 100mm dia cast iron floor trap/Nahani trap with grating including grating jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

Cutting into existing manholes for connecting new drains of 150mm internal dia of pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required complete all as specified and directed. directed.

S&F Straight plain brass ferrules 40mm(or connecting screws) screwed both ends and fixed complete all as specified and directed.

S&F steel tubes medium grade galvanised 80mm bore with all fittings laid in trenches complete all as specified and directed.

S&F steel tubes medium grade galvanised 50mm bore with all fittings laid in trenches complete all as specified and directed.

S&F steel tubes medium grade galvanised 25mm bore with all fittings laid in trenches complete all as specified and directed.

S&F steel tubes medium grade galvanised 20mm bore with all fittings and fixed complete to walls and ceilings and laid in floors complete all as specified and directed.

S&F Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed 80mm bore complete all as specified and directed.

S&F Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed 20mm bore complete all as specified and directed.

S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum weight 15mm-142gms/ 20mm-210gms/25mm-455gms/40mm-690 gms) for 25mm bore pipe complete all as specified and directed.

Taking down carefully any type of point wiring (light, fan, bell socket or power), complete excluding fittings but including switches, ceiling roses, pendants, regulators, sockets, light fittings etc. stacking at site for reuse of serviceable items and making good disturbed surfaces of walls, ceiling, floors etc to match with existing surface complete all as directed.

Material and labour for point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts, FRLS grade cable conforming to IS-694 1990 drawn in existing concealed/surface conduit including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light or fan point controlled by one 5 Amps switch one way complete all as specified and directed.

All as per item No 130 here-in-before but for One 3 pin 5 Amp switch socket outlet on independent board.

All as per item No 130 here-in-before but for One 3 pin 5 Amp switch socket outlet on same board with other switches.

All as per item No 130 here-in-before but for one 5A 3 pin socket outlet independent but below the switch board of light points in the same vertical plane.

All as per item No 130 here-in-before but wiring with 2.5 sqmm size single core multistranded copper conductor cable for 6 pin 15 Amps switch socket combination outlet on independent board with 1.5 sqmm PVC insulated and unsheathed copper conductor as earth and connected to earth dolly.

M & L point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts, FRLS grade cable conforming to IS-694 1990 drawn in and including PVC Casing and Caping with all accessories including fabricated MS terminal boxes fixed flush with wall surface with 3 mm thick masonite laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light or fan point controlled by one 5 Amps switch one way complete all as specified and directed.

All as per item No 135 here-in-before but for One 3 pin 5 Amp switch socket outlet on independent board

All as per item No 135 here-in-before but for One 3 pin 5 Amp switch socket outlet on same board with other switches.

All as per item No 135 here-in-before but wiring with 4 sqmm size single core multistranded copper conductor cable for 6 pin 15 Amps switch socket combination outlet on independent board with 1.5 sqmm PVC insulated and unsheathed copper conductor as earth and connected to earth dolly complete all as specified and directed.

Supply & fixing switch piano, flush type single pole one way 5 Amps 230 volt complete all as directed.

Supply & fixing socket outlet 3 pin, 2-in-1, 5 Amps flush type complete all as directed.

Supply & fixing switch socket combination outlet 5 pin, 2-in-1, 5 Amp flush type complete all as directed.

Supply & fixing switch socket combination multipurpose, 2 in 1, 6 pin, 5 & 15 Amp flush type complete all as directed.

Supply & fixing ceiling rose surface bakelite 65x50mm three terminal complete all as directed.

Supply & fixing lamp holder insulated,PVC/ polycarbonate /bakelite body complete all as directed.

Supply & fixing stepped type electronic fan regulator, two module size, flush type complete all as directed.

S & F in repair LED light fitting 10 watt 230 volt including 10 watt LED tube, extruded aluminium for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete all as specified and directed. Make :- Jaquar Model- LGLZ01x010xC or equivalent Model of make : Philips / Bajaj / Crompton.

S & F in repairs LED box type fitting pre-wired including LED tube 1 x 20 W connecting up with PVC insulated and sheathed 1100 volt grade flexible copper cable complete all as specified and directed. Make:- Jaquar Model- LGLZ01x020xC or equivalent. Model of make : Philips / Bajaj / Crompton.

S&F in repair Environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaire comprising of high brightness LEDs complete all as specified and directed. Make:- Havells Model- LHEOAOP7UZ6WO10 or equivalent model of make Philips /Bajaj/Crompton.

S&F in repair single pole & neutral, DBs, 8 Ways, double door, protection class IP-43, suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with minimum 200 Amp rating copper bus bar 240V and grouted in wall with PCC, 1:2:4, type B1, using 20mm graded stone aggregate complete all as dierected. Make :- Legrand Cat No 6077 11 or equivalent model of make Siemens/Schnider

S&F single pole & neutral, DBs, 8 Ways, double door, protection class IP-43, suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with minimum 200 Amp rating copper bus bar 240V and grouted in wall with PCC, 1:2:4, type B1, using 20mm graded stone aggregate complete all as dierected. Make :- Legrand Cat No 6077 11 or equivalent model of make Siemens/Schnider

M&L for MCBs, SPN 40 to 63 Amps, 10 KA, 'C' curve, IS/IEC 60898-1 2002 marked, fixing in DBs complete all as specified and directed. Make :- Legrand Cat No 4086 18 to 4086 20 or equivalent model of make Siemens/Schnider

M&L for MCBs, SP 6 to 32 Amps, 10 KA, 'C' curve, IS / IEC 60898-1 2002 marked, fixing in DBs complete all as specified and directed. Make :- Legrand Cat No 4085 87 to 4085 95 or equivalent model of make Siemens/Schnider.

S&F in repairs 1100 volts grade heavy duty flat cable of size 10 Sqmm 2 core, PVC insulated aluminium solid conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 m apart including replacing 4mm suspension wire complete all as specified and directed.

S&F in repair energy efficient 5 star rated ceiling fan 1200 mm sweep, single phase 230/240 volts AC and connecting up to including provn of porcelin connector and flexible three core copper conductor of size 23/0.0076 from ceiling rose or connector to ceiling fan and testing on completion, complete all as specified and directed. Make : USHA Model Energia ISI 5 star or equivalent model in make Cromption /Bajaj/Orient. Note: Old Fan to be deposited in MES store yard.

S&F in repair ventilating fans AC single phase 230/ 240 V of size 250 mm sweep with louver complete all as specified and directed. Note: Old Fan to be deposited in MES store yard. Make-Havells , Model-Ventil Air - DX White or equivalent model of make USHA/Bajaj /Crompton.

S&F ventilating fans AC single phase 230/ 240 V of size 3000 mm sweep with louver complete all as specified and directed. Note: Old Fan to be deposited in MES store yard. Make-Havells , Model-Ventil Air - DX White or equivalent model of make USHA/Bajaj /Crompton.

S&F RCCBs double pole 40A, 30mA 'C' curve IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and directed.

M&L for Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers etc and connected to and including 4mm dia GI wire upto 7.5 m by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 15mm dia GI pipe connected to main control board and GI pipe medium grade 20mm bore for watering and including funnel, wire mesh, charcoal,salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including excavation and earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 including taking down old unserviceable earthing & earth pit complete all as specified and as directed.

Supply, lay, testing, connecting and commissioning under ground cable LT 1100 volts grade heavy duty XLPE insulated armoured with aluminium stranded conductor of size 10 Sqmm 2 core laid in trenches/fixed to poles/drawn through pipes with suitable size cable glands crimping type cable lugs etc complete all as specified and directed.

Material and labour for sand cushioning with dry river sand in trenches for cushioning of underground cable line including spreading, leveling, well ramming completed all as specified and directed.

Supply and laying well burnt sub class ‘B’ bricks ( designated 75) locally available best quality laid dry in trenches for protection of underground cable all as specified and directed

S&F steel tubular swaged pole complete with MS base plate welded to pole, finial taper plug, bolts, nuts and screws as specified type 410 SP-31 (9 metre long) complete all as specified and as directed.

S&F street light luminare 45w WSPD epoxy powder coated pressure dia cast aluminium housing with weatherproof gasket for LED's and control gear compartment, pressure dia cast aluminium frame with heat resistance toughened clear glass fixed with SS screws LED specification: CREE LED/Equavalent, colour temperature -6500K +/- 300K Lens with twin core conductor complete all as specified and directed. Make: Havells Cat Part No. ENDURAPEARLNEOSL45WLED757PASYTOPC or equivalent model in BAJAJ /Phillips/Surya

S&F Street light bracket made to shape out of GI pipe 40 mm bore light grade, 2 mtr length and fixed with MS Calmps, nuts, bolts and washers on pole complete all as specified and directed.

S&F thermoplastic street light junction box including all necessary fittingscompleted all as specified and directed.

M/S SHARMA CONSTRUCTION