REPAIR/ MAINT TO UNSV POINT WIRING, MODULAR FITTINGS AND FIXTURES, MODULAR SWITCHGEARS, HAND DRIERS, MOTORISED, AIR CURTAINS, AND OTHER MISC E/M WORKS AT CGDA HQ AND CENTRAD UNDER GE (E/M) BASE HOSPITAL DELHI CANTT-10

Amount

Taking down carefully copper/ aluminium point wiring (Light, fan, socket, power and Bell) complete, including unscrewing from board out let boxes, fitting and fixtures such as switches, sockets, ceiling roses, lamp, holder brackets, ceiling/wall light fittings and regulators etc and making good disturbed surface of walls, floors, etc. complete all as specified and as directed.

Taking down, shifting and refixing carefully copper/ aluminium point wiring (Light, fan, socket, power and Bell), including unscrewing from board out let boxes, fitting and fixtures such as switches, sockets, ceiling roses, lamp, holder brackets, ceiling/wall light fittings and regulators etc and making good disturbed surface of walls, floors, etc. complete all as specified and as directed. Note:- Quoted Rates shall be inclusive of supply and fixing up to 1.5 metre Casing capping, suitable size of wire, same as existing wire, sunken type pressed steel terminal boxes of required size with 3mm thick Bakelite steel white/coloured top cover, for extension of point wiring.

M&L for point wiring, with 1.5 Sqmm, single core, multi stranded, copper conductor PVC insulated, FRLS, unsheathed cable, 1100 Volts grade, drawn through and including PVC casing, capping with accessories like bends tees, junction boxes etc fixed recessed in wall or ceiling etc, including sunken type pressed steel terminal boxes of size with 3mm thick Bakelite steel white/coloured top cover, including 1.5 Sqmm size PVC insulated, unsheathed, copper earth continuity conductor to common earth and connecting to earth dolly suitable for the following complete all as specified and as directed:-

One light/fan point, controlled by one switch, 5 Amps, one way, single pole.

One bell point controlled by one switch, 5 Amps, one way, single pole.

One 3 Pin, socket out let, 5 Amps, on the same board.

One 3 pin, socket out let, 5 Amps, on the independent board.

All as per item No. 3.00 here in before but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire with 2.5 Sqmm single core cable for one 3 pin, 15 Amps socket out let point on independent board complete all as specified and as directed.

S&F in repair switch piano flush type, 230 Volts, 5 Amps, single pole complete all as specified and as directed.

S&F in repair Socket outlet 3 pin, 5A, flush type, 230 Volts complete all as specified and as directed.

S&F in repair Switch socket combination, 5 in 1, 3 pin, 5 and 15 Amp, flush type universal, 230 Volts complete all as specified and as directed.

S&F in repair bell push, 5 Amps, flush type complete all as specified and as directed.

S&F in repair bell, Ding dong, AC, 230V complete all as specified and as directed.

S&F in repair switch piano flush type, 230 Volts, 15 Amps, single pole complete all as specified and as directed.

S&F in repair Modular switch, one way, 10 Amp, 230 Volts, 1 module complete all as specified and as directed.

S&F in repair Modular switch, 16/20 Amp, 230 Volts, 1 module complete all as specified and as directed.

S&F in repair Modular socket, 6/10 Amp, 230 Volts, 2&3 pin, combined, 2 module complete all as specified and as directed.

S&F in repair Modular socket, 16/20 Amp, 230 Volts, 2&3 pin, combined, 2 module complete all as specified and as directed.

S&F in repair Modular white, cover plate with frame, 1 module complete all as specified and as directed.

S&F in repair Modular white, cover plate with frame, 2 module complete all as specified and as directed.

S&F in repair Modular white, cover plate with frame, 3 module complete all as specified and as directed.

S&F in repair Modular white, cover plate with frame, 4 module complete all as specified and as directed.

S&F in repair Modular white, cover plate with frame, 6 module complete all as specified and as directed.

S&F in repair Modular white, cover plate with frame, 8 module complete all as specified and as directed.

S&F in repair Modular white, blank plate, 1 module complete all as specified and as directed.

S&F in repair Modular white, blank plate, 2 module complete all as specified and as directed.

S&F in repair Modular white, step Fan regulator, 100 watt, 2 module complete all as specified and as directed.

S&F in repair flexi bell, the wireless door bell with no interference including all accessories like remote and Batteries complete all as specified and as directed.

S&F in repair uni Switch socket combination, with box, with 2 fixing holes, 5 in 1, 3 pin, 20 Amps and 10 Amp, flush type universal, 240 Volts complete all as specified and as directed.

S&F in repair 6 Amps, 3 pin, Super Plug top complete all as specified and as directed.

S&F in repair 16 Amps, 3 pin, Super Plug top complete all as specified and as directed.

S&F in repair 6/10/13 Amps, Spike Guard, with 4 Nos sockets controlled by single switch, indicator and overload protection, voltage Surge protection, moulded plug confirming to ISI requirement, with 1.5 Metre, 3 core, 2.5 Sqmm insulated wire, versatile socket compatible with multi plug special slot to hang product vertical.

S&F in repair Isolator SP/MCB 230 Volts, 6 to 32 Amp, suitable for existing Make and model complete all as specified and as directed.

S&F in repair Isolator, TPN, 415 Volts, 63 Amp suitable for existing Make and model complete all as specified and as directed.

S&F in repair MCCB, TPN, 100 Amps, 415 Volts, breaking capacity 16 KA complete all as specified and as directed.

S&F in repair MCCB, TPN, 125 Amps, 415 Volts, breaking capacity 16 KA complete all as specified and as directed.

S&F in repair MCCB, 4 Pole, 160 Amps, 415 Volts, breaking capacity 36 KA complete all as specified and as directed.

S&F in repair MCCB, 4 Pole, 200 Amps, 415 Volts, breaking capacity 36 KA complete all as specified and as directed.

S&F in repair MCCB, 4 Pole, 250 Amps, 415 Volts, breaking capacity 36 KA complete all as specified and as directed.

S&F in repair Bi-pin Holder suitable for 18/24/36 fluorescent tube light fitting complete all as specified and as directed.

Taking down ceiling fan/cabin fan/Duct fan of any sweep and dismantling fan blade, dismantling electric connection, removing capacitor, checking of bearings/bushes, cleaning the fan blades with clear water, scrapping the fan blades, placing the bearing, bush, capacitor, rewinding complete, re-assembling the ceiling fan complete including greasing, oiling, testing the same & making the fan serviceable and re-hanging and connecting with the ceiling rose complete all as specified and as directed. Note: rewinding, bush, bearing, capacitor, twin core, flexible cable shall be measured and paid for separately under respective item of this Schedule.

All as per item No 39.00 here in before but for exhaust fan 300/ 450mm sweep, any type complete all as specified and as directed.

M&L in replacement re-winding of ceiling fan motor of any type and size, using copper winding wire of same as existing gauge including replacement of insulated paper, varnishing, including cleaning/greasing, including removing old burnt wire complete all as specified and as directed.

All as per item No 41.00 here in before but for pedestal fan/cabin fan/duct fan, 350/400/450mm sweep, any type complete all as specified and as directed.

All as per item No 41.00 here in before but for exhaust fan 300/450mm sweep, any type complete all as specified and as directed.

All as per item No 41.00 here in before but for duct type exhaust fan, any type complete all as specified and as directed.

Supply only in repair ball bearing for 1200mm sweep ceiling fan as required at site complete all as specified and as directed.

Supply only in repair ball bearing for 300/450mm sweep exhaust fan/duct fan as required at site complete all as specified and as directed.

Supply only in repair gun metal bush for 300/450mm sweep exhaust fan as/duct fan required at site complete all as specified and as directed.

Supply only in repair rubber insulator Heavy duty with bolts nuts & split pin etc complete for 1400/1200mm sweep ceiling fan complete all as specified and as directed.

Supply only in repair capacitor of 2.5 MFD for Ceiling/ Exhaust fan complete all as specified and as directed.

Supply only in repair capacitor of 4 MFD for Ceiling/ Exhaust fan complete all as specified and as directed.

S&F in repair pedestal fan/cabin fan blade any sweep, suitable for existing fan complete all as specified and as directed.

S&F in repair fluorescent Tube rod 36/40 Watt, 230 Volt complete all as specified and as directed.

S&F in repair fluorescent Tube rod 18/20 Watt, 230 Volt complete all as specified and as directed.

S&F in repair Tube rod 14 Watt, 230 Volt, T-5 type, complete all as specified and as directed.

S&F in repair Power saving LED light fitting, 9 Watt, 2 feet (Approx), 230 Volt complete all as specified and as directed. Make: Havells Cat No LUMILINEBS9WLED865SPCWH or equivalent Model of Make mentioned in PS.

S&F in repair Power saving LED glow batten, 4 step dimming fitting light 18/20 Watt, 4 feet (Approx), 230 Volt, turn off and on in 5 second with a click of switch complete all as specified and as directed. Make: Havells Cat No LHEXBLP7JN1W018 or equivalent Model of Make mentioned in PS.

S&F in repair decorative ultra slim, round profile, LED light fitting, with extruded polycarbonate, environment friendly, energy Power saving, LED glow batten fitting light 20/22 Watt, 4 feet (Approx), 230 Volt complete all as specified and as directed. Make: Havells Cat Part No LHEXBLP7PN1W020 or equivalent Model of Make mentioned in PS.

S&F in repair Power saving LED Colour changing Batten light fitting, 20/22 Watt, 4 feet (Approx), 230 Volts, turn off and on in 5 second to change colour complete all as specified and as directed.

S&F in repair Ballast electronic slim 1X36/40 Watt complete all as specified and as directed.

S&F in repair Ballast electronic slim 1X18/20 Watt complete all as specified and as directed.

S&F in repair Ballast electronic slim 4X14 Watt complete all as specified and as directed.

S&F in repair Universal starter for 110V/230V/240 V, 18 W/20 W/36 W/40 W/65 W/80 W FTL & 18/36 W FP-L (CFL) complete all as specified and as directed.

S&F in repair CFL, 18 Watt, 4/2 pin, 230 Volts complete all as specified and as directed.

S&F in repair non retrofit CFL, 4 pin, PL type, 36/40 Watt, cool day light, 230 Volts complete all as specified and as directed.

S&F in repair CFL, 18 Watt, 3U or spiral, E27 cap, 230 Volts complete all as specified and as directed.

S&F in repair CFL, 11 Watt, 3U or spiral, E27 cap, 230 Volts complete all as specified and as directed.

S&F in repair 6 Watt, LED capsule/LED GU 10 /GU10C /candle LED SES, E-14 small screw cap, 230 Volt or as required as per site requirement complete all as specified and as directed.

S&F in repair LED Lamp, 0.5 Watt, 230 Volts complete all as specified and as directed.

S&F in repair LED Lamp, 9 to 12 Watt, 230 Volts Screw/pin type complete all as specified and as directed.

S&F in repair LED Lamp, 18 Watt, 230 Volts complete all as specified and as directed.

S&F in repair PVC insulated, 1.50 Sqmm, single core, copper conductor, FRLS complete all as specified and as directed.

S&F in repair PVC insulated, 2.50 Sqmm, single core, copper conductor, FRLS complete all as specified and as directed.

S&F in repair PVC insulated, 4.0 Sqmm, single core, copper conductor, FRLS complete all as specified and as directed.

S&F in repair PVC insulated, 6.0 Sqmm, single core, copper conductor, FRLS complete all as specified and as directed.

M&L for preparing old painted steel tubular poles, including cleaning the surface of poles by rubbing with emery Paper to remove oil stains, dust etc and applying two coat of existing colour synthetic enamel paint by spray paint to steel tubular pole of height above 7 Metre up to 11 metre, including cross arms, Bracket etc including writing Pole No on each pole with black paint on yellow circle complete all as specified and as directed.

M&L for preparing old painted steel tubular poles, including cleaning the surface of poles by rubbing with emery Paper to remove oil stains, dust etc and applying two coat of existing colour synthetic enamel paint by spray paint to steel tubular pole up to 7 metre height including cross arms, Bracket etc including writing Pole No on each pole with black paint on yellow circle complete all as specified and as directed.

S&F in repair 100 Watt, New generation, energy saving and environmental friendly, long life, LED Street Light fitting, made out of pressure die cast aluminium housing, with high power LED as lighting source with toughened glass top cover, top opening, separate driver compartment, with IP66 protection, impact resistance of IK07, with 10KV Built-in Surge Protection Device complete all as specified and as directed. Make: Havells, Cat Part No. - ENDURAPEARLMAGNUMSL100WLED757PASYTOTGAST or equivalent Model of Make mentioned in PS.

S&F in repair Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium, flood light, 200 Watt, IP66, with high power LEDs as light source, complete with all related accessories and Wall or surface mounting using adjustable MS bracket with screws complete including connecting to Electric supply complete all as specified and as directed. Make: Havells, Cat Part No. - JETA VALOURFL200WLED757PINTWBLT G or equivalent Model of Make mentioned in PS.

S&F in replacement Automatic Hand Dryer with Heating element and Hot/Cold Switch and with the following specifications : Body Material : ABS Plastic (White), Finish : white, Mounting : Wall Mounting, Operation : Fully Automatic, Motor : Brush AC type, Power : 1000W, Voltage : 220V/50Hz, Current : 0.9A, Water Splash Proof : IPX1, Blowing Volume : 90 Cum/Hour, Time Protection : 60 Seconds auto cut-off, Sensing Range : 20cm +/‐ 5cm, Air Speed : 35 +/- 2 m/s, 18000RPM, Drying Time : >20 Sec, Noise Level : 75DB, Dimension : 255x145x130mm complete all as specified and as directed.

S&F in repair Pull Cord Switch or rotary Switch, 5 Amp, 250 Volt, one way, to ON and OFF the indicator lamps complete all as specified and as directed.

S&F in repair Brass lamp holder (batten type/ pendent type/Brass Back plate Lamp Holder/Burfi holder etc), base cap B22/E-14/E-27 as required at site complete all as specified and as directed.

S&F in repair recessed type, 34W to 36W, Full window glare free, opal Diffuser LED Panel light fitting, size 595X595mm, suitable for Existing false ceiling, with MS Powder coated White Housing, total system Lumen of 34W to 36W LED shall be 3800 or above in Cool day Light (5700K to 6500K), Power factor>0.95, CRI (Ra) >80, System Lumen Efficacy>110 Lm/w, THD (%) < 10, LED Lamp Efficacy>140 Lm/W with Average life of 50000 Burning hours, Complete with all accessories as required with connections complete all as specified and as directed. Make- Havells Cat Part No.- VENUSNEOHE2X2PLR18-42WLED830MOD, Driver Model LEDDRIVER36V36WS/ Philips Cat Part No- RC380B LED36S -6500 G4 L60 W60 PSU OD or equivalent Model of Makes Mentioned in PS

S&F in repair recessed type, 15W to 18W LED Round Down light with pressure die-cast aluminium heat sink & glare free opal Diffuser of size 160mm Dia (Approx) . Total system Lumen of 15W to 18W LED should be 1400 or above in Cool day Light (5600K to 6000K), Power factor>0.95, CRI>80, LED Lamp Efficacy>140 Lm/W, with all accessories as required with connections complete all as specified and as directed. Make- Havells Cat Part No - EDGEPRORDDLR15WLED857S/ Philips Cat Part No - DN 394B LED16S-6500 PSU WH or equivalent Model of Makes Mentioned in PS.

S&F in repair Recessed type, 15W to 18W, Full window glare free, opal Diffuser, LED Panel light fitting, size 300X300 mm (Approx) with MS Powder coated White Housing, total system Lumen of 15W to 18W, LED shall be 1200 or above in Cool day Light (5700K to 6500K), Power factor>0.95, CRI (Ra) >80, LED Lamp Efficacy>140 Lm/W, with all accessories as required with connections complete all as specified and as directed. Make- Havells Cat Part No - PLUTO1X1PLR15WLED857S or equivalent Model of Makes Mentioned in PS.

S&F in replacement LED decorative post Top lantern, 25Watt, including all accessories, complete fixing accessories and clamp, including 4 metre height black painted glavanized pole, fixed in position including necessary PCC work and excavation as per manufacturer's instruction complete all as specified and as directed. Make:- CG, Cat Part No:- LPTSA-30-T or equivalent Model of Makes Mentioned in PS.

S&F in replacement LED decorative post Top lantern, 35Watt, including all accessories, complete fixing accessories and clamp, including 4 metre height black painted glavanized pole, fixed in position including necessary PCC work and excavation as per manufacturer's instruction complete all as specified and as directed. Make:- CG, Cat Part No:- LPTOI-45- CDL/T or equivalent Model of Makes Mentioned in PS.

S&F in repair Heat Pillar (Portable Heaters), Mild steel body, 1500 Watts, with twin quartz tube for direct heating, safety tip over switch cuts off the heater in case it is tilts or falls, two heat setting (400 Watt/800 Watts) for maintaining desired room temperature, powder coated finish to prevent corrosion, operating on 230 Volts, AC, 50 Hzs complete all as specified and as directed. Note: Old heat pillar shall be deposited in MES Store yard by the contractor.

S&F in replacement LED decorative, wall mounting, light fitting, with plastic body, suitable for B22 type LED/CFL lamp, with opal white, PC diffuser poetics for glair free light, including mounting brackets etc complete, including one No 9 Watt LED Lamp complete all as specified and as directed. Make:- Havells Model Stylo Wall Light or equivalent Model of Makes Mentioned in PS.

Supply only DHPP 'N' for running DG sets installed at Power House of CGDA complex and CENTRAD from nearest Petrol Pump complete all as specified & as directed. Note: The DHPP 'N' stock shall be maintained at least 2000 Litre within 15 days from date of commencement of work and further shall be top up as per requirement bases and as directed by Engr-in-Charge. A penalty of Rs 1000.00 per day shall be imposed on the contractor, if minimum stock levels are not maintained within 24 Hours of demand raised by Engr-in-Charge. Strict compliance shall be ensured to avoid failure of standby supply due to non availability of DHPP 'N'.

S&F in repair digital Voltage Stabilizer of capacity 1 KVA for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilized at 230V with accuracy of +2.5% complete all as specified and directed. Make: V-Guard Model No :- VGSD 50 or equivalent model of Bluebird, Emerson

S&F in repair digital Voltage Stabilizer of capacity 2 KVA for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilized at 230V with accuracy of + 2.5% complete all as specified and directed. Make: V-Guard model No VGSD 100 or equivalent model of Bluebird, Emerson

S & F in replacement PVC body Exhaust fan, 250 mm sweep ,1200 RPM, 5 blade, off white, 240 Volt, with louver shutter, including necessary connection with flexible PVC Copper cable, 3 core, size 1.5 Sqmm of length from ceiling rose to exhaust fan including nut bolt and washers of suitable size complete all as specified and as directed.

Taking down the geyser from its existing position for general cleaning/overhauling, cleaning and descaling the tank and assembly with suitable detergent and making fully serviceable (the item required for serviceability shall be measured in respective Sch 'A' item mentioned hereafter) and refixing in new/old position complete with testing all as specified and as directed.

Supply only in replacement of fusible plug type (pressure valve) Air release valve.

Supply only in replacement air release valve (Nozzle) all as spec ified as per sample.

Supply only in replacement gasket of thickness 5 mm for geyser assembly of 06 holes/ 08 holes / 09 holes all as specified and as directed.

Supply only in replacement Syphen assembly of copper, 06/ 08/ 09 holes with nut bolts/slud/washer all as specified and as directed.

Supply only in replacement MCB SP 20 Amp, 240 Volt with 3 pin top and metal clad socket 20 Amp with sheet metal enclosure complete all as specified of Make-Havells/HPL/Standard)

Supply only in replacement of indicating lamp for geyser rectangular type/round type.

Supply only in replacement industrial type metal clad socket only of 20 Amps Make- Anchor/Havells/Standard

Supply only in replacement of metal clad top 20 Amp Make- Anchor/Havells/Standard

Supply only in replacement inner shell of Geyser of cap 25 Ltr made out of steel tank complete all as specified.

All as per Srl item No 100 here in before but 35 Ltr Cap.

All as per Srl item No 100 here in before but 50 Ltr Cap.

S&F fastner mild steel 150 mm long x 10 mm dia with pin and bolts complete for hanging of geyser properly on wall and making good to the disturbed surfaces including plastering and white washing all as directed.

Taking down geyser from existing location for preparation of body of geyser by knotting and stopping of outer surface, repainting the complete outer surface of geyser with one coat of synthetic enamelled paint 1st quality Make- Berger/Asian and refixing the same on wall in existing location and writing "GE E/M BHDC" of letter size 10 mm all as directed.

Unscrew the nutbolt and taking out the base plate geyser assembly and copper tank making soldering and brazing of tank to stop the leakage of tank and fixing back in the position of geyser.

Supply only outer body of Geyser Cap 25/ 35/ 50 Ltr of 20 SWG MS Sheet duly painted all as specified.

Supply only in replacement PVC connection heavy duty of ss body and SS nut for hot/cold water of size 15mm x 600 mm long.

Supply only in replacement PVC connection heavy duty of SS body and SS nut for hot/cold water of size 15mm x 450 mm long.

Supply only in replacement thermostat switch of gysers (adjustable type).

Supply only in replacement heating element 1.5 KW (round type) with rubber gasket.

All as per item No.110 here in before but round type type 2 KW (as per sample)

All as per item No.110 here in before but triangle type 1.5 KW (as per sample)

All as per item No.110 here in before but triangle type 2 KW (as per sample)

S&F in repair 5 star rated vertical mounted Water heater geyser body of capacity 25ltrs having dimensions 360x380x515 mm. Features: outer body-ABS, Safety feature-Multi function safety valve, thermostat, thermal cutout, viterous enameled glass line tank with CRCA outer body with powder coated with heavy duty anode rod prevent from corrosion & permanent scaling with adjustable knob for temp setting between 30°C to 75°C, high density PUF for thermal insulation with LED power indication.Technical specifications: voltage-230V, Type-storage, Frequency-50Hz, Wattage- 2 Kilo Watts, Pressure-8 Bar, Pressure Class- Class 1.

Supply only in replacement Geyser Installation Kit, Suitable for all kinds of water heaters / Geysers, 1 Litres to 100 Litres, Kit Includes 2 Nos ( or 1 Pair) of flexible Connection Pipes Premium Steel Ribbed, Bolts (Coach Screws) & washers / Connection Nipple / 15A Plug / Teflon Tape / Angle Valve Brass etc complete all as specified and as directed.

S&F in repair Hot air blower, Heat convector, 2 KW capacity, with blower and temp control mechanism and indications, operating on 230V, AC, 50 HZ complete all as specified and as directed.

S&F in repair Flykiller metal type (65x21.5x35)cm 15 watt 03 nos tube, fully automatic on 230V, AC, 50 HZ complete all as specified and as directed.

S&F in repair Surface mounting type, 15W Aesthetically designed 1x1 LED flat Panel Full window glare free, opal Diffuser, LED Panel light fitting, size with MS Powder coated White Housing, total system Lumen of 15W to 18W, LED shall be 1200 or above in Cool day Light (5700K to 6500K), Power factor>0.95, CRI (Ra) >80, LED Lamp Efficacy>140 Lm/W, with all accessories as required with connections complete all as specified and as directed. Make- Havells Cat Part No - PLUTOSURFACE1X1PLR15WLED857S or equivalent Model of Makes Mentioned in PS.

S&F in repair Surface mounting type, 42W Aesthetically designed 2x2 LED flat Panel Full window glare free, opal Diffuser, LED Panel light fitting, size with MS Powder coated White Housing, total system Lumen of 15W to 18W, LED shall be 1200 or above in Cool day Light (5700K to 6500K), Power factor>0.95, CRI (Ra) >80, LED Lamp Efficacy>140 Lm/W, with all accessories as required with connections complete all as specified and as directed. Make- Havells Cat Part No - PLUTOSURFACE2X2PLR15WLED857S or equivalent Model of Makes Mentioned in PS.

S&F in repair Surface mounting type, 34W Aesthetically designed 1x4 LED flat Panel Full window glare free, opal Diffuser, LED Panel light fitting, size with MS Powder coated White Housing, total system Lumen of 15W to 18W, LED shall be 1200 or above in Cool day Light (5700K to 6500K), Power factor>0.95, CRI (Ra) >80, LED Lamp Efficacy>140 Lm/W, with all accessories as required with connections complete all as specified and as directed. Make- Havells Cat Part No - PLUTOSURFACE1X4PLR15WLED857S or equivalent Model of Makes Mentioned in PS.

S&F in repair Surface mounting type, 24W Aesthetically designed 1x4 LED flat Panel Full window glare free, opal Diffuser, LED Panel light fitting, size with MS Powder coated White Housing, total system Lumen of 15W to 18W, LED shall be 1200 or above in Cool day Light (5700K to 6500K), Power factor>0.95, CRI (Ra) >80, LED Lamp Efficacy>140 Lm/W, with all accessories as required with connections complete all as specified and as directed. Make- Havells Cat Part No - lheaakp7IL1W024 or equivalent Model of Makes Mentioned in PS.

S&F in repair 4watt 5000K white DESKLITE SLEEK WITH ADJUSTABLE LAMP SHADE AND CONNECTING ROD WITH FLEXIBLE TURNING MANUAL SWITCH with all accessories as required with connections complete all as specified and as directed. Make- Havells Cat Part No - LHEXBVP7SN1W005 or equivalent Model of Makes Mentioned in PS.

S&F in repair GI Fan blade.suitable.

S&F in repair Suitable for desert cooler PVC connection set of three complete as existing.

S&F in repair suitable for desert cooler 3 core flexible copper conductor cable of size 0.5 Sqmm.

S&F in repair Grass pad set of 3 pads superior quality ,weight of each set not less than 0.50 kg.

S&F in repair Front grill of suitable size.4'x4' suiatable for Existing desert cooler

S&F in repair Fan motor single phase 50 Hz 230V AC max Amp 1.5 as existing.

S&F in repair Water submersible pump 240V AC 50 Hz 10W 5 LPM 2 mtr head.

S&F in repair ON-OFF switch 5 Amp 240V for water pump.

S&F in repair Mounting bracket for fan motor with nut & bolt etc. as existing.

S&F repair Capacitor 4 Mfd + 5% 440V MPP ‘SH’.

S&F in reapir GI shutters suitable for cooler 4’ x 4’.

S&F in Repair Industrial motor suitable for 24 sweep fan.

Electronic water level indicator (LED type showing three level).

M&L for dismantling of all components from GI body evaporative cooler (desert cooler) metal body very carefully viz exhaust fan, water pump, grass pad, water distribution line etc with and including preparation of exterior and interior portion on cooler to a smooth finish and applying one coat of bituminous paint and reassembling the same in the cooler for smooth running complete all as directed. Note:- If any worn out items noticed during reassembling the same shall be measured and paid separately.

M&L for dismantling of all components from Plastic body evaporative cooler (desert cooler) metal body very carefully viz exhaust fan, water pump, grass pad, water distribution line etc with and including preparation of exterior and interior portion on cooler to a smooth finish and applying one coat of bituminous paint and reassembling the same in the cooler for smooth running complete all as directed. Note:- If any worn out items noticed during reassembling the same shall be measured and paid separately.

S&F in repair Fan main motor copper winding single phase 50 Hz 230V AC 107 watt Heavy Body Motor, 1330 RPM, max Amp 1.5 as existing.

S&F in repair Air cooler swing motor Ac 220-240 V, 3 RPm 4watt, 50 Hz, Torque 4Kgf.Cm, Shaft Rotation.

S&F in repair Air cooler Dura Pump Ac 220-240 V, 14 watt, 50 Hz.

S&F in repair Air cooler PCB Ac 220-240 V.

S&F in repair Air cooler 6 Blade Ac 220-240 V.

S&F in repair 25 Litres capacity electric Storage Water Heater of specification 230 Volt AC, 50 Hz,2KW rated Incoloy Glass Coated Heating Element, Digital temperature indicator Display, inner container made up of Feroglas TM Technology, Feather Touch Panel for temperature setting with all connecting accessories (1 Geyser, Shock-Safe power cord with 3 pin plug, 1 manual, Wall mounting accessory & 2 flexi pipe etc) complete as specified and directed by Engr-in-Charge.

S&F in repair ceiling mounted cast copper with K9 Crustal instalation chandelier with 16x5 watt Led Candle watt Led Lamp Base E14 Dimensios (in CM) D-98x H-240 with Suitable Size os SS Chain. Note: Chalinder Approved by Engr-in-Charge/ GE.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sq mm 2 core complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core complete all as specified and directed.

Excavation in trenches in soft and loose soil n.exc 1.5 mtr wide and n.exc. 1.5 mtr depth for laying and taking out of electric power cable and getting out all as specified and directed.

Material & labour for river washed and screened dry sand for filling under and above the under ground cable for cushioning of cables etc.complete all as specified and directed.

Supply & laying sub class B bricks having minimum compressive strenth 75 Kg/sqm laid in trenches for cable protection etc complete all as directed.

Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25 cm thick all as specified and directed.

Removing excavated material not exceeding 50 mtr away and depositing where directed at a level n. exc 1.5 mtr above the starting point complete all as specified and directed.

Supply, installation, testing & commissioning Street Light Timer Panel cubical type of minimum external dimensions of 1050x800x250mm, outdoor type, self stand on angle iron frame upto 500mm height, dust & vermin proof, 415 V, 3 Phase, 4 wire 50 HZ with common aluminium busbar 300 Amps, openable in front side with locking arrangement made out of CRCA sheet 3mm thick with powder coating seven tank process duly powder coated & with danger notice plate on front door suitable for and inclusive of following accessories complete all as specified and directed:- Incoming:- (a) TP, 415 Volt, 65 Amp, 36 KA - 01 No Make:- Legrand Cat Part No :- 4200 93 or equivalent model of ABB/L & T/C &S. Outgoing:- (a) MCB TPN, 415 Volt, 63 Amps, 16 KA - 01 Nos, Make :- Legrand cat part No :- 4200 02 or equivalent model of ABB/L & T/C &S (b) Contactor 3 pole with 2 No + 2 NC Aux contact for AC circuit with AC 240 V coil voltage type ML2, 32 Amps, 415 V, Cat No: SS 90701, Make L & T - 02 Nos. (c) Timer switch, Make :- GIC ( L & T) cat part No J-648 B-1 - 02 Nos Note:- Quoted rates shall deemed to be inclusive of grouting / fixing of panel in PCC 1:3:6 type C2 and PCC block masonry with PCC block of mix 1:4:8 & plastering 10mm thick in cement mortar 1:6 complete all as specified and directed.

S&F weather proof twin core PVC Insulated, PVC sheathed cable, 650 V grade, copper multistrandard conductor of size 2.5 Sqmm, as in service wire conductor for looping box, O/H line to street light fittings complete including testing commission all as directed.

S&F pole mounted junction box (Street light boxes) sliding type (Door fits to base by means of sliding) for 3 phase 4 wire lighting system, moulded in FRP including provision of 2 Nos MCB 16 Amps and bus bar insulator- 4 Nos with nut & bolts with fixing arrangement, outdoor type of dimensions 345 x 250 x 150 mm ( H x W x D) complete all as specified and directed.

M&L Earthing complete with galvanised Iron earth plate electrode 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25mtr deep below GL) with top edge of the plate not less than 1.5 metre below normal ground level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all round the plate with using 25X4 mm GI earth strip electrode welded and revetted to earth plate up to a distance of 7.5 metre long, GI earth strip encased in and including 40mm bore GI light grade pipe, with 20mm bore GI pipe light grade as water pipe from earth chamber to upper edge of earth plate, MS funnel with wire mesh fixed on water pipe including excavation earth work, Provn of PCC pit in PCC 1:2:4 type B-1 chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1 duly reinforced with MS bars 8mm dia @ 150 mm centre to centre, both ways complete with lifting handle all as shown in electrical plate No 3 of SSR of part-I complete all as specified and as directed.

M&L for Boring of holes under road, pavement, hard standing by manually with suitable tools including HDPE pipe of 200 mm dia suitable for 0.4 mpa working pressure complete all as specified and directed. Note: If any Cable/Pipe Line/Road/Pathway/any tiles will be damaged it shall be repaired by contractor without any extra cost will be pay.

M & L for PCC (1:4:8) type D2 using 40mm graded stone aggrgate for foundation of stay assembly , pole, struts etc complete all as specified and directed.

M & L for PCC (1:2:4) type B1 using 20mm graded stone aggrgate as in pedestal of pole/ struts including use of waste of necessary form work and finishing exposed faces of concrete even & smooth without using extra cement complete all as specified and directed.

Supply and fix HDG Octagonal steel tubular swaged poles type 410SP-31(9.0 meter long) with Top 70mm, bottom-155mm, base Plate 260x260x16, PCD 260MM, Foundation Bolt" J" 24mmx750mm (03 Nos) pole thickness 3mm, Base plate 320x320x16mm, hole slot 4 nos 28x40, Bolt for earthing including painting as directed complete all as specified and directed.

M&L for Cross arms, bracings, supports,clamps and back plates fabricated from structural steel sections including nuts, bolts, washers,welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and directed.

S&F LED flood Light fitting 240/250 watt, system efficiency not less than 100 lumen / watt, IP66protection, consisting of high/ low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws fixed on bracket/ Channel & connecting, i complete. Make:- Cat No JETAIRSALPHAFL250WLED757APLTG -Havells or equivalent model of make/ CG/ Philips/ Orient Electric or makes mentioned in PS.

S.K. ENGINEERS

SANJEEV ENTERPRISES

M/S Rohit Enterprises

Saini Enterprises

Vishal Traders

sony engineering works