Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.2 LAccepted-AOC 482 GALI NO 4 TULSI VIHAR AZAD NAGAR HISAR 125001 | HISAR | HISAR | HARYANA | 125001 | L1 | Accepted-AOC accepted | |
| 2 | L2₹21.0 L+₹72,658.92 (3.59%)Rejected-AOC NA | NA | NA | 121004 | L2 | Rejected-AOC rejected | |
| 3 | L3₹21.3 L+₹1.0 L (5.08%)Rejected-AOC H NO 959 SECTOR 3 ROHTAK | L3 | Rejected-AOC rejected | |
| 4 | L4₹23.4 L+₹3.2 L (15.6%)Rejected-AOC | L4 | Rejected-AOC rejected |
Tender Value
₹26.1 L
EMD Value
₹52,140
Closing Date
26 Mar 2024, 5:00 pmClosed
VISHWNATH KHICHI
ED - Rohtak
Provision of 7 Mtr. long octagonal pole with 90 watt LED Street Light fitting of Havells Make or its equivalent make and specifications have been proposed in this estimate. There exist 2 Nos. automatic time switch, 2 Nos. 20 KVA Servo Stabilizer have
2024_HRY_363676_1
2024B784A606 25D8 4C31 B5B6 EA767CC01956667BAR
Open Tender
Electrical Works
Works
120 days
Jhajjar
Technical documents as per approved DNIT conditions.
3 documents required · 3 mandatory
₹5,000
₹52,140
Yes
25 Jul 2024
5 Mar 2024
27 Mar 2024
5 Mar 2024
26 Mar 2024
5 Mar 2024
Amount
HSR Items
[23.22.1.9]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.9. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 6 amp to 100 amp , 25 KA
[23.22.5.1]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.1. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Single Pole
[23.27.2]Supply and erection of Godrej Almirah typeM.S. pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S. sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:- 2. M.S. pedestal of size 750 mm wide , 900 mm high , 300 mm deep and bottom totally open , duly embeded in cement concrete block of size 900 mm x 450 mm x 200 mm above ground level , having a base of size 1050 mm x 600 mm x 250 mm below ground level . 0 0
[24.1.1]EARTHING AND LIGHTENING ARRESTOR 1. Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required.
[24.1.13]EARTHING AND LIGHTENING ARRESTOR 13. Providing and fixing 4.00 mm dia G1. Wire on surface or in recess for loop earthing as required.
[24.1.2]EARTHING AND LIGHTENING ARRESTOR 2. Extra for using salt and char coal/coke for pipe earth electrode as required.
[24.10.6]CIVIL ITEMS (USED COMMONLY IN ELECTRICAL WORKS) 6. Digging of pucca road in required width for laying of cable / pipe complete in all respect up to the entire satisfaction of Engineer-in charge
[24.2.8.4]LT CABLE 8.4. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 16 sqmm
[24.4.8.5]STREET LIGHT 8.5. Supply and erection of Hot Dip Galvanized octagonal pole of 3mm thickness, with base plate including cost of nut and bolts , earthing studs, Integral Cable termination arrangement 5 mm thick Bakelite base plate on suitable welded MS/GI bracket 32 A four way connector 2 no 10 A SP MCB , end cover and all accessories as supplied by the manufacture including Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @80 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge 7 Metre Long pole with top dia 75 0mm and bottom dia 150 mm with base plate of size 300 x 300 x 20 mm
[24.5.2.3]MISCELLANEOUS ITEMS 2.3. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 63/50 mm outer dia/inner dia
[24.6.2]DISMANTLING 2. Dismantling of pole/ street light standard/ strut embedded in brick ballast foundation etc. as required.
NS Items
Supply and Erection of bracket made of 40mm dia G l pipe B class lSl 1.25mtr. Long with coller pipe (Gl) 75mm dia 60 cm Long top covered with ornamental cap duly welded painted 2 coats of aluminum paints on bracket and golden paint of ornamental cap including the cost of labour and petty material etc. complete in all respect up to the entire satisfaction of Engineer-in charge of the work. i) Single Arm Bracket
Supply and Erection of Underground cable loose in existing pipe or trenches complete in all respect upto up to the entire satisfaction of Engineer-in-Charge of the work. 16 Sqmm 4 core (Ard.) Cable Make: - Polycab / Havells / RR
Supply and Erection of Underground cable loose in existing pipe or trenches complete in all respect upto up to the entire satisfaction of Engineer-in-Charge of the work. 25 Sqmm 4 core (Ard.) Cable Make: - Polycab / Havells / RR
Supply and Erection of Power Management Unit suitable for operation on three phase having following specification. Input-200-500 / Output-380 V. AC Three Phase. Stability-±1% , Efficiency-More than 95%, Distortion Introduced- -NIL-, Frequency- 50 Hz plus /- 3 Hz, Speed of Correction - 20 V.P/ Sec. Construction-Outdoor type (IP-55 Certified), Canopy - Suitable to protect during rainm Surge Protection- Class-2, Type 2, 20 KA Surge Protection shall be provided as per IEC 61643-11 2011, MCCB /MCB - TPN MCB shall be provided at the input of the PMU, Class of Insulation-A, Duty Cycle- Continuous, No. of phases - Three, Design and Testing Standards - IS-9815/IS2026, Cooling - Oil Cooled with filling of oil complete in all respect upto the entire satisfaction of Engineer-in-Charge of the work with five year warranty. Capacity-20 KVA Three Phase Make: - Hi-shine (HS) / IECO / Aarkey
Supply and Erection of Underground Copper un-armd. cable loose in existing pipe or trenches complete in all respect upto up to the entire satisfaction of Engineer-in-Charge of the work. 1.5 Sqmm 3 core un-ard. cable Make: - Polycab / RR / Havells
Supply and Erection of 40 Amp. 3 Phase automatic / digital time switch of Indo Asian Make or its equivalent make of CandS / Schneider / LandT along with contactor of required capacity of Indo Asian make movement controlled by precisaty quartz osciliation operation on main supply of continue to run on built in rechargeable nickle cadium call for 150 hours in the event of power failure including cost of all petty items complete in all respect upt the entire satisfaction of Engineer-in-Charge of the work.
Supply and Erection of LED street light fitting of 90 Watt Havells Make Model No.Endura Pearl Plus SL 90 Watt or its equivalent model and specifications Make Philips / Bajaj / Wipro / Surya / Halonix with pressure die cast alluminium housing, IP-66 reflector and enclosed with toughened glass with all accessories as supplied by the manufacturer including cost of all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work with five year warranty.
Deduct - Dismantling (Buy Back) of Old Pole
Deduct - Dismantling (Buy Back) 45 W Street Light
Deduct - Dismantling (Buy Back) of Old Cable
kunwar electricals
DEVENDER KUMAR CONTRACTOR
S.S. Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .