Regarding development of Ganeshpeth corporation building first floor of at ward no 64

Regarding development of Ganeshpeth corporation building first floor of at ward no 64

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-...

Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. vol 2 page no 187 item no 19.2.1

Removing of existing old or broken wash basin / urinals/ Indian Water closet/ European Water closet and disposing it with all cost and conveyance labour for all items of work, HOM with all lead and li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...

Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Providing and fixing chlorinated polvinyle chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and placing on terrace (at all level floors) polyethylene water storage tanks IS 120701 markest with cover and suitable looking arrangement and making necessary holes per inlet, outlet and o...

Providing and fixing brass stop cock of approved quality. 20 mm nominal bore vol 2 page no 117 item no 13.3.2

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete vol 2 page no 105 item no 12.62

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...

Painting with Silicon & Acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces :Two coats with paint of approved quality to give...

Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even ...

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes including cost of materials, labour, usage charges...

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...

Providing and fixing glazing in aluminium door, window, ventilatorshutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions ofe...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

Supplying, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992, IS 4127 with latest amendments, including conveying to work sit...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...

Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...

Supplying and wiring adopting loop system in existing PVC

Conduit /casing capping casing capping using 2x1.5mm2

(Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi

strand PVC insulated copper wire (...

2.2.2) Mediumpointabove3Mtrupto6Mtrfromtappingpointtooutletviaswitch box

2.2.3) Longpointabove6Mtrupto10Mtrfromtappingpointtooutletviaswitch box

2.3) Wiringforlighting/powercircuitusingoneofFRLSPVCinsulated1100Vgrade,multistrandcopperwirewithlowconductorresistancesinglecoreinopenorconcealedsystemofwiringwithspecifiedIS-694:2010

1.9) SupplyingPVCflexibleconduitpipe.mmdiafixingonsurfaceoverinvertedtaperedwoodenplugsorphillplugsorrawlplugsandclampedusingheavygaugesaddlesatanintervalof300mmusigNFscrews and on either end of the p...

Supplying And fixing/replacing of 6/16/32A electrical

accessories on existing switch board.

6A Batten Holder

PWD,Elct, SR2023-24 Page No. 10 IItem code 3.14.7

Supplying and fixing superior quality modular switch mounting

polycarbonate plate with necessary supporting back plate with

required nos. of machine screws, bolts nuts etc., complete on

the existing m...

3.5.4) 6 Module

PWD,Elct, SR2023-24 Page No. 5 IItem code 3.5.4

Supplying and fixing of modular switch & connected accessories

on existing modular switch plate as per IS 3854 and IS 1293.

3.6.1)6A One Way Switch

PWD,Elct, SR2023-24 Page No. 9 IItem code 3.6.1

Supplying and fixing of modular switch & connected accessories

on existing modular switch plate as per IS 3854 and IS 1293

3.6.3) 6A Three Way socket

PWD,Elct, SR2023-24 Page No. 9 IItem code 3.6.3

Fixing all types and all capacities of fluorescent /false ceiling /

spot light / CFL / LED fittings indoor on the wall/ ceiling /

rafters / girders using 23/0.0076" twin twisted PVC insulated

Supplying & fixing miniature circuit breakers on existing

MCB distribution boards using necessary fixing materials

and 'C' Type curve, indicator ON/OFF, energy cross-3 with

Short circuit breaking capa...

Supplying of .feet - PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greaterthan 80. PowerInput: 220-240V ay 50/60Hz...

6.3) Supplying capacitor type ceiling fan complete with down rod blades,shackle,canopiesetc,foroperationon230V,50cycles.Single phase Acsupply conformingtoISS-374-1979andwithdoubleballbearingsystem.

3.6) Supplying and fixing of modula switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.

3.6.4) Stepped Fan Regulator Two Module

SupplyingandfixingregularMCBdistributionboardsonwall/oodboard/flushmountingusingrequiredclamps,bolts,nutsetc.,withprovisionforfixingsuitabletypecapacityMCB'ssinglephase/3phase/singledoorwithpowdercoat...

GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long,

3.2 mm thick with bolt, nut, GI Strips and washer

Minimum Weight of GI Pipe: 7.3 Kg Schedule of Rate for Standard Stock Mat...

Good Quality well burnt Charcoal for grounding

purposes packed in non returnable gunny bag of 30 Kg

each Schedule of Rate for Standard Stock Materials in Common SR 2023-24 (11 kV System)

Good Quality Salt for grounding purposes packed in 50

Kg gunny bag Schedule of Rate for Standard Stock Materials in Common SR 2023-24 (11 kV System)

Rod type of earthing using 40 mm Dia, 3 Mtr long MS

rod as ground rod, in earth pit of 300 mm width and

3300 mm depth and using 50x6 mm flat welded to

ground rod as terminal &...

Bentonite clay slurry for earthing in 50 Kg Bag Schedule of Rate for Standard Stock Materials in Common SR 2023-24 (11 kV System)

1.6) Digging of Pit for providing GI Pipe type Earthing

21 ) 1.6.1) Ordinary Soil Labour Charges in Common SR 2023-24 (11 kV System)

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975

Laying of cable in Existing Trench/GI pipe/Stoneware/RCC Hume pipe using wooden/Aluminium Rollers as directed by department staff. 2.5 to 25Sqmm. ESCOMs SR 2023-24 Page No 388 Item No 21.05

Fuses Supplying & fixing of Porcelain fuse channel with cut out

on existing wooden/panel using necessary nuts, bolts and

washers. 5.7.2) 32Amps PWD SR 2023-24 Item code5.7.2

Digging Cutting of Road surface for cable trenches and disposing

of the excavated earth, as directed including

Barricading, Danger Lighting then Refilling the Cable

29.10) Tar Road

PLB Pipe 40/33 mm ESCOMs SR 2023-24 Page No 366 Item No 66.05

5.43 Supply and Installation / Fixing / Provision of Pole box with HRC Fuse / MCB provision and suitable connector / terminal for 3 Ph/ 1 Ph connections with Loop-In & Loop- Out terminals for 10 mm2 /...

Pothead Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable Up to 4C x 50 Sqmm ESCOMs SR 2023-24 Page No 351 Item No 35.01

GI Pipe B - Class as per IS-1239 GI Pipe - 20 mm Dia BESCOM SR 2021-22 Page No 16 Item No 49.01

3.6) Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293.

3.6.7) 16A One Way Switch

3.6.10) 6/16A Universal Socket