WBPWD/AE/NRSH/NIT-29/2025-26_1

Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering conrners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (ground floor). [Excluding cost of chipping over concrete surface].

(i) with 1:6 cement mortar.

(b) 20 mm. thick plaster.

(i) with 1:6 cement mortar.

(b) 20 mm. thick plaster. (Add. above ground floor - 1st. floor)

(i) with 1:6 cement mortar.

(b) 20 mm. thick plaster. (Add. above ground floor - 2nd floor)

(i) with 1:6 cement mortar.

(b) 20 mm. thick plaster. (Add. above ground floor - 3rd floor)

Supplying,Fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.

(B) Wall With Sand Cement Mortar(1:3)15mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m. & joint filling using white cement slurry @0.20kg/Sq.m.

(b) Area of each tile the above 0.09Sq.m.

(i) Coloured decorative.

(B) Wall With Sand Cement Mortar(1:3)15mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m. & joint filling using white cement slurry @0.20kg/Sq.m.

(b) Area of each tile the above 0.09Sq.m.

(i) Coloured decorative. (Add. above ground floor - 1st. floor)

(B) Wall With Sand Cement Mortar(1:3)15mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m. & joint filling using white cement slurry @0.20kg/Sq.m.

(b) Area of each tile the above 0.09Sq.m.

(i) Coloured decorative. (Add. above ground floor - 2nd floor)

Supplying bubble free float glass of approved make and brand. Conforming to IS: 2835-1987.

(i) 4 mm thick clear glass.

Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium section for the following units:-.

(A) Glazed aluminium sliding windows made of extruded and anodized alloy aluminium sectios , fabrications, including cutting to proper shape and size, drilling and alinging of window and shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joinerires along with extruded neoprine or EPDM gasketing in between window frame and masonary work (walls, column, beam, lintels etc.), as well as between glass and shutter frame for fixing glass, & poly sulphate sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of EIC. The rate incluides the hire charges of all tools and plants, including all incidental charges, adhesive, joineries such as screw, cleat angle etc. But excludes the cost of extuded aluminium sections, glass, neoprene /EPDM gasketing, locking arrangement and rollers.

(ii) 3/4 track sliding window. (Add. above ground floor - 2nd floor)